SearcharxivSearch

arXiv subjects

Philippe Tassin

Publications and source records attributed to Philippe Tassin.

At least 19 recordsLinked to original sources

Symmetry-Informed Deep Learning for Electromagnetic Scattering

Deep learning can accelerate the modeling of electromagnetic devices by replacing costly simulations with neural networks trained to map design parameters to scattering parameters. However, data efficiency remains a central bottleneck, as training data is typically generated through expensive numerical simulations. Here we show that symmetry provides a powerful and largely untapped route to overcoming this limitation in electromagnetic scattering problems. Leveraging the equivariance of Maxwell's equations, we obtain general transformation rules that map symmetries of electromagnetic devices to corresponding transformations of their scattering parameters. This enables both systematic data augmentation and the construction of exactly equivariant neural networks. We implement the framework for both discrete and continuous symmetry groups and demonstrate its effectiveness on photonic-crystal slabs and free-form diffraction gratings. Incorporating symmetry improves data efficiency by an order of magnitude compared to standard architectures, while equivariant models additionally enforce physical constraints exactly. Our approach is general and complementary to existing physics-informed strategies, provides a first-principles framework for constructing physically grounded surrogate models, and establishes symmetry as a unifying inductive bias for data-efficient and physically consistent learning in computational electromagnetics and beyond.

physics.optics

Inverse-designed release-free optomechanical crystal with high photon-phonon coupling

Interactions between light and mechanics provide a powerful interface between optical and microwave-frequency signals, with applications spanning classical signal processing and quantum technologies. High-performance optomechanical devices require both strong photon-phonon coupling and tolerance to parasitic laser heating. Release-free optomechanical crystals provide improved thermal anchoring compared to suspended nanobeams, but have so far exhibited weaker vacuum optomechanical coupling rates, leaving a trade-off between coupling strength and thermal robustness. Here, we largely close this gap: we design and experimentally demonstrate a release-free silicon optomechanical crystal with a record vacuum optomechanical coupling rate of about $g_\text{OM} / (2 \pi) = 800$ kHz, comparable to suspended state-of-the-art devices. The resulting optomechanical scattering rate $\Gamma_\text{OM}/(2 \pi)= 1.1$ kHz is nearly twice that of previous release-free implementations. This performance is achieved by combining physics-guided human intuition with a multiphysics inverse-design algorithm introduced here for resonant optomechanical structures. Beyond the specific device demonstrated, the inverse-design framework is applicable to co-optimizing optical and mechanical resonances and eigenmodes more broadly. These results strengthen release-free optomechanical crystals as a platform for fast, low-noise classical and quantum optomechanics.

physics.optics

A general framework for knowledge integration in machine learning for electromagnetic scattering using quasinormal modes

Neural networks have been demonstrated to be able to accelerate the modeling and inverse design of optical and electromagnetic devices by serving as fast surrogates for electromagnetic solvers. Nevertheless, such neural networks can be unreliable and normally require extreme amounts of data to train. Here it is shown that these limitations can be alleviated by constraining neural-network models using prior knowledge about the governing physics. We propose a universal physics-informed neural network framework for electromagnetic scattering based on the quasinormal mode expansion of the scattering matrix. The neural networks learn the resonant structure underlying the scattering spectrum, are guaranteed to obey energy conservation and causality, and are shown to have significantly improved data efficiency for photonic-crystal slabs and all-dielectric free-form metasurfaces. Furthermore, the framework allows additional problem-specific constraints, such as losslessness, symmetries, and number of modes, to be imposed manually when they are available. The method can be applied to a wide range of optical and electromagnetic devices owing to the generality of the quasinormal mode formalism.

physics.optics

Evaluation of machine learning techniques for conditional generative adversarial networks in inverse design

Recently, machine learning has been introduced in the inverse design of physical devices, i.e., the automatic generation of device geometries for a desired physical response. In particular, generative adversarial networks have been proposed as a promising approach for topological optimization, since such neural network models can perform free-form design and simultaneously take into account constraints imposed by the device's fabrication process. In this context, a plethora of techniques has been developed in the machine learning community. Here, we study to what extent new network architectures, such as dense residual networks, and other techniques like data augmentation, and the use of noise in the input channels of the discriminator can improve or speed up neural networks for inverse design of optical metasurfaces. We also investigate strategies for improving the convergence of the training of generative adversarial networks for inverse design, e.g., temporarily freezing the discriminator weights when the model outperforms the generator and training data blurring during the early epochs. Our results show that only some of these techniques improve inverse design models in terms of accuracy and stability, but also that a combination of them can provide more efficient and robust metasurface designs.

physics.optics

Quasibound states in the continuum in photonic-crystal-based optomechanical microcavities

We present a detailed study of mechanically compliant, photonic-crystal-based microcavities featuring a quasi-bound state in the continuum. Such systems have recently been predicted to reduce the optical loss in Fabry-Perot-type optomechanical cavities. However, they require two identical photonic-crystal slabs facing each other, which poses a considerable challenge for experimental implementation. We investigate how such an ideal system can be simplified and still exhibit a quasi-bound state in the continuum. We find that a suspended photonic-crystal slab facing a distributed Bragg reflector realizes an optomechanical system with a quasi-bound state in the continuum. In this system, the radiative cavity loss can be eliminated to the extent that the cavity loss is dominated by dissipative loss originating from material absorption only. These proposed optomechanical cavity designs are predicted to feature optical quality factors in excess of 10^5.

physics.optics

Integrated microcavity optomechanics with a suspended photonic crystal mirror above a distributed Bragg reflector

Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of the optical field. In this work, we follow this approach by realizing a sub-wavelength-long, free-space optomechanical microcavity on-chip fabricated from an (Al,Ga)As heterostructure. A suspended GaAs photonic crystal mirror is acting as a highly reflective mechanical resonator, which together with a distributed Bragg reflector forms an optomechanical microcavity. We demonstrate precise control over the microcavity resonance by change of the photonic crystal parameters. The interplay between the microcavity mode and a guided resonance of the photonic crystal modifies the cavity response and results in a stronger dynamical backaction on the mechanical resonator compared to conventional optomechanical dynamics.

physics.optics

Deep neural networks for the prediction of the optical properties and the free-form inverse design of metamaterials

Many phenomena in physics, including light, water waves, and sound, are described by wave equations. Given their coefficients, wave equations can be solved to high accuracy, but the presence of the wavelength scale often leads to large computer simulations for anything beyond the simplest geometries. The inverse problem, determining the coefficients from a field on a boundary, is even more demanding, since traditional optimization requires a large number of forward problems be solved sequentially. Here we show that the free-form inverse problem of wave equations can be solved with machine learning. First we show that deep neural networks can be used to predict the optical properties of nanostructured materials such as metasurfaces. Then we demonstrate the free-form inverse design of such nanostructures and show that constraints imposed by experimental feasibility can be taken into account. Our neural networks promise automated design in several technologies based on the wave equation.

physics.comp-ph

Cavity Optomechanics with Photonic Bound States in the Continuum

We propose a versatile, free-space cavity optomechanics platform built from two photonic crystal membranes, one of which is freely suspended, and designed to form a microcavity less than one wavelength long. This cavity features a series of photonic bound states in the continuum that, in principle, trap light forever and can be favorably used together with evanescent coupling for realizing various types of optomechanical couplings, such as linear or quadratic coupling of either dispersive or dissipative type, by tuning the photonic crystal patterning and cavity length. Crucially, this platform allows for a quantum cooperativity exceeding unity in the ultrastrong single-photon coupling regime, surpassing the performance of conventional Fabry-Perot-based cavity optomechanical devices in the non-resolved sideband regime. This conceptually novel platform allows for exploring new regimes of the optomechanical interaction, in particular in the framework of pulsed and single-photon optomechanics.

quant-ph

Suspended photonic crystal membranes in AlGaAs heterostructures for integrated multi-element optomechanics

We present high-reflectivity mechanical resonators fabricated from AlGaAs heterostructures for use in free-space optical cavities operating in the telecom wavelength regime. The mechanical resonators are fabricated in slabs of GaAs and patterned with a photonic crystal to increase their out-of-plane reflectivity. Characterization of the mechanical modes reveals residual tensile stress in the GaAs device layer. This stress results in higher mechanical frequencies than in unstressed GaAs and can be used for strain engineering of mechanical dissipation. Simultaneously, we find that the finite waist of the incident optical beam leads to a dip in the reflectance spectrum. This feature originates from coupling to a guided resonance of the photonic crystal, an effect that must be taken into account when designing slabs of finite size. The single- and sub-$\upmu$m-spaced double-layer slabs demonstrated here can be directly fabricated on top of a distributed Bragg reflector mirror in the same material platform. Such a platform opens a route for realizing integrated multi-element cavity optomechanical devices and optomechanical microcavities on chip.

physics.app-ph

Anomalous optical saturation of low-energy Dirac states in graphene and its implication for nonlinear optics

We reveal that optical saturation of the low-energy states takes place in graphene for arbitrarily weak electromagnetic fields. This effect originates from the diverging field-induced interband coupling at the Dirac point. Using semiconductor Bloch equations to model the electronic dynamics of graphene, we argue that the charge carriers undergo ultrafast Rabi oscillations leading to the anomalous saturation effect. The theory is complemented by a many-body study of the carrier relaxations dynamics in graphene. It will be demonstrated that the carrier relaxation dynamics is slow around the Dirac point, which in turn leads to a more pronounced saturation. The implications of this effect to the nonlinear optics of graphene is then discussed. Our analysis show that the conventional perturbative treatment of the nonlinear optics, i.e., expanding the polarization field in a Taylor series of the electric field, is problematic for graphene, in particular at small Fermi levels and large field amplitudes.

cond-mat.mes-hall

Current-controlled light scattering and asymmetric plasmon propagation in graphene

We demonstrate that plasmons in graphene can be manipulated using a DC current. A source-drain current lifts the forward/backward degeneracy of the plasmons, creating two modes with different propagation properties parallel and antiparallel to the current. We show that the propagation length of the plasmon propagating parallel to the drift current is enhanced, while the propagation length for the antiparallel plasmon is suppressed. We also investigate the scattering of light off graphene due to the plasmons in a periodic dielectric environment and we find that the plasmon resonance separates in two peaks corresponding to the forward and backward plasmon modes. The narrower linewidth of the forward propagating plasmon may be of interest for refractive index sensing and the DC current control could be used for the modulation of mid-infrared electromagnetic radiation.

cond-mat.mes-hall

High-sensitivity plasmonic refractive index sensing using graphene

We theoretically demonstrate a high-sensitivity, graphene-plasmon based refractive index sensor working in the mid-infrared at room temperature. The bulk figure of merit of our sensor reaches values above $10$, but the key aspect of our proposed plasmonic sensor is its surface sensitivity which we examine in detail. We have used realistic values regarding doping level and electron relaxation time, which is the limiting factor for the sensor performance. Our results show quantitatively the high performance of graphene-plasmon based refractive index sensors working in the mid-infrared.

cond-mat.mes-hall

Optical signatures of nonlocal plasmons in graphene

We theoretically investigate under which conditions nonlocal plasmon response in monolayer graphene can be detected. To this purpose, we study optical scattering off graphene plasmon resonances coupled using a subwavelength dielectric grating. We compute the graphene conductivity using the Random Phase Approximation (RPA) obtaining a nonlocal conductivity and we calculate the optical scattering of the graphene-grating structure. We then compare this with the scattering amplitudes obtained if graphene is modeled by the local RPA conductivity commonly used in the literature. We find that the graphene plasmon wavelength calculated from the local model may deviate up to $20\%$ from the more accurate nonlocal model in the small-wavelength (large-$q$) regime. We also find substantial differences in the scattering amplitudes obtained from the two models. However, these differences in response are pronounced only for small grating periods and low temperatures compared to the Fermi temperature.

cond-mat.mes-hall

Comparison of gold- and graphene-based resonant nano-structures for terahertz metamaterials and an ultra-thin graphene-based modulator

Graphene exhibits unique material properties and in electromagnetic wave technology, it raises the prospect of devices miniaturized down to the atomic length scale. Here we study split-ring resonator metamaterials made from graphene and we compare them to gold-based metamaterials. We find that graphene's huge reactive response derived from its large kinetic inductance allows for deeply subwavelength resonances, although its resonance strength is reduced due to higher dissipative loss damping and smaller dipole coupling. Nevertheless, tightly stacked graphene rings may provide for negative permeability and the electric dipole resonance of graphene meta-atoms turns out to be surprisingly strong. Based on these findings, we present a terahertz modulator based on a metamaterial with a multi-layer stack of alternating patterned graphene sheets separated by dielectric spacers. Neighbouring graphene flakes are biased against each other, resulting in modulation depths of over 75% at a transmission level of around 90%.

physics.optics

Graphene for terahertz applications

Graphene is a one-atom-thick sheet of carbon atoms arranged in a honeycomb lattice. It was first obtained by exfoliation of graphite in 2004 and has since evolved into a thriving research topic because of its attractive mechanical, thermal, and electrical properties. Graphene's unique electrical properties derive from the relativistic nature of its quasiparticles, resulting in exceptionally high electron mobility. Graphene promises to revolutionize many applications, ranging from solar cells and light-emitting devices to touch screens, photodetectors, microwave transistors, and ultrafast lasers.

physics.optics

One- and two-dimensional photo-imprinted diffraction gratings for manipulating terahertz waves

Emerging technology based on artificial materials containing metallic structures has raised the prospect for unprecedented control of terahertz waves through components like filters, absorbers and polarizers. The functionality of these devices is static by the very nature of their metallic or polaritonic composition, although some degree of tunability can be achieved by incorporating electrically biased semiconductors. Here, we demonstrate a photonic structure by projecting the optical image of a metal mask onto a thin GaAs substrate using a femtosecond pulsed laser source. We show that the resulting high-contrast pattern of photo- excited carriers can create diffractive elements operating in transmission. With the metal mask replaced by a digital micromirror device, our photo-imprinted photonic structures provide a route to terahertz components with reconfigurable functionality.

physics.optics

Strong group velocity dispersion compensation with phase-engineered sheet metamaterials

Resonant metamaterials usually exhibit substantial dispersion, which is considered a shortcoming for many applications. Here we take advantage of the ability to tailor the dispersive response of a metamaterial introducing a new method of group-velocity dispersion compensation in telecommunication systems. The method consists of stacking a number of highly dispersive sheet metamaterials and is capable of compensating the dispersion of optical fibers with either negative or positive group-velocity dispersion coefficients. We demonstrate that the phase-engineered metamaterial can provide strong group-velocity dispersion management without being adversely affected by large transmission loss, while at the same time offering high customizability and small footprint.

physics.optics

Large quality factor in sheet metamaterials made from dark dielectric meta-atoms

Metamaterials-or artificial electromagnetic materials-can create media with properties unattainable in nature, but mitigating dissipation is a key challenge for their further development. Here, we demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant metallic antennas. We experimentally demonstrate a dispersion-engineered metamaterial based on a meta-atom made from alumina, and we show that its resonance has a much larger quality factor than metal-based meta-atoms. Finally, we show that our dielectric meta-atom can be used to create sheet metamaterials with negative permittivity or permeability.

physics.optics