arXiv subjects

Philippe Wenger

Publications and source records attributed to Philippe Wenger.

At least 91 records · Page 5Linked to original sources

arXiv2007

The Isoconditioning Loci of A Class of Closed-Chain Manipulators

The subject of this paper is a special class of closed-chain manipulators. First, we analyze a family of two-degree-of-freedom (dof) five-bar planar linkages. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the ``inverse kinematics" and the "direct kinematics" matrices. It is shown that the loci of points of the workspace where the condition number of the direct-kinematics matrix remains constant, i.e., the isoconditioning loci, are the coupler points of the four-bar linkage obtained upon locking the middle joint of the linkage. Furthermore, if the line of centers of the two actuated revolutes is used as the axis of a third actuated revolute, then a three-dof hybrid manipulator is obtained. The isoconditioning loci of this manipulator are surfaces of revolution generated by the isoconditioning curves of the two-dof manipulator, whose axis of symmetry is that of the third actuated revolute.

cs.RO↗

arXiv2007

Workspace and Assembly modes in Fully-Parallel Manipulators : A Descriptive Study

The goal of this paper is to explain, using a typical example, the distribution of the different assembly modes in the workspace and their effective role in the execution of trajectories. The singular and non-singular changes of assembly mode are described and compared to each other. The non-singular change of assembly mode is more deeply analysed and discussed in the context of trajectory planning. In particular, it is shown that, according to the location of the initial and final configurations with respect to the uniqueness domains in the workspace, there are three different cases to consider before planning a linking trajectory.

cs.RO↗

arXiv2007

Conception Isotropique D'Une Morphologie ParallÈle : Application à L'Usinage

The aim of this paper is the isotropic design of a hybrid morphology dedicated to 3-axis machining applications. It is necessary to ensure the feasibility of continuous, singularity-free trajectories, as well as a good manipulability in position and velocity. We want to propose an alternative design to conventional serial machine-tools. We compare a serial PPP machine-tool (three prismatic orthogonal axes) with a hybrid architecture which we optimize only the first two axes. The critrerion used for the optimization is the conditioning of the Jacobian matrices. The optimum, namely isotropy, can be obtained which provides our architecture with excellent manipulability properties.

cs.RO↗

arXiv2007

Singular curves and cusp points in the joint space of 3-RPR parallel manipulators

This paper investigates the singular curves in two-dimensional slices of the joint space of a family of planar parallel manipulators. It focuses on special points, referred to as cusp points, which may appear on these curves. Cusp points play an important role in the kinematic behavior of parallel manipulators since they make possible a nonsingular change of assembly mode. The purpose of this study is twofold. First, it reviews an important previous work, which, to the authors' knowledge, has never been exploited yet. Second, it determines the cusp points in any two-dimensional slice of the joint space. First results show that the number of cusp points may vary from zero to eight. This work finds applications in both design and trajectory planning.

cs.RO↗

arXiv2007

Workspace Analysis of the Parallel Module of the VERNE Machine

The paper addresses geometric aspects of a spatial three-degree-of-freedom parallel module, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel module consists of a moving platform that is connected to a fixed base by three non-identical legs. Each leg is made up of one prismatic and two pairs of spherical joint, which are connected in a way that the combined effects of the three legs lead to an over-constrained mechanism with complex motion. This motion is defined as a simultaneous combination of rotation and translation. A method for computing the complete workspace of the VERNE parallel module for various tool lengths is presented. An algorithm describing this method is also introduced.

cs.RO↗

arXiv2007

The Orthoglide: Kinematics and Workspace Analysis

The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which moves in the Cartesian x-y-z space with fixed orientation. New solutions to solve inverse/direct kinematics are proposed and a detailed workspace analysis is performed taking into account specific joint limit constraints.

cs.RO↗

arXiv2007

A New Concept of Modular Parallel Mechanism for Machining Applications

The subject of this paper is the design of a new concept of modular parallel mechanisms for three, four or five-axis machining applications. Most parallel mechanisms are designed for three- or six-axis machining applications. In the last case, the position and the orientation of the tool are coupled and the shape of the workspace is complex. The aim of this paper is to use a simple parallel mechanism with two-degree-of-freedom (dof) for translation motions and to add one or two legs to add one or two-dofs for rotation motions. The kinematics and singular configurations are studied for each mechanism.

cs.RO↗

arXiv2007

A Workspace based Classification of 3R Orthogonal Manipulators

A classification of a family of 3-revolute (3R) positioning manipulators is established. This classification is based on the topology of their workspace. The workspace is characterized in a half-cross section by the singular curves of the manipulator. The workspace topology is defined by the number of cusps and nodes that appear on these singular curves. The design parameters space is shown to be partitioned into nine subspaces of distinct workspace topologies. Each separating surface is given as an explicit expression in the DH-parameters.

cs.RO↗

arXiv2007

Singularity Surfaces and Maximal Singularity-Free Boxes in the Joint Space of Planar 3-RPR Parallel Manipulators

In this paper, a method to compute joint space singularity surfaces of 3-RPR planar parallel manipulators is first presented. Then, a procedure to determine maximal joint space singularity-free boxes is introduced. Numerical examples are given in order to illustrate graphically the results. This study is of high interest for planning trajectories in the joint space of 3-RPR parallel manipulators and for manipulators design as it may constitute a tool for choosing appropriate joint limits and thus for sizing the link lengths of the manipulator.

cs.RO↗

arXiv2007

Kinematics analysis of the parallel module of the VERNE machine

The paper derives the inverse and forward kinematic equations of a spatial three-degree-of-freedom parallel mechanism, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel mechanism consists of a moving platform that is connected to a fixed base by three non-identical legs. Each leg is made up of one prismatic and two pair spherical joint, which are connected in a way that the combined effects of the three legs lead to an over-constrained mechanism with complex motion. This motion is defined as a simultaneous combination of rotation and translation.

cs.RO↗

arXiv2007

An Algorithm for Computing Cusp Points in the Joint Space of 3-RPR Parallel Manipulators

This paper presents an algorithm for detecting and computing the cusp points in the joint space of 3-RPR planar parallel manipulators. In manipulator kinematics, cusp points are special points, which appear on the singular curves of the manipulators. The nonsingular change of assembly mode of 3-RPR parallel manipulators was shown to be associated with the existence of cusp points. At each of these points, three direct kinematic solutions coincide. In the literature, a condition for the existence of three coincident direct kinematic solutions was established, but has never been exploited, because the algebra involved was too complicated to be solved. The algorithm presented in this paper solves this equation and detects all the cusp points in the joint space of these manipulators.

cs.RO↗

arXiv2007

Kinematic Calibration of the Orthoglide-Type Mechanisms

The paper proposes a novel calibration approach for the Orthoglide-type mechanisms based on observations of the manipulator leg parallelism during motions between the prespecified test postures. It employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg location while the manipulator moves the TCP along the Cartesian axes. Using the measured differences, the developed algorithm estimates the joint offsets that are treated as the most essential parameters to be adjusted. The sensitivity of the measurement methods and the calibration accuracy are also studied. Experimental results are presented that demonstrate validity of the proposed calibration technique.

cs.RO↗

arXiv2007

Calibration of quasi-isotropic parallel kinematic Machines: Orthoglide

The paper proposes a novel approach for the geometrical model calibration of quasi-isotropic parallel kinematic mechanisms of the Orthoglide family. It is based on the observations of the manipulator leg parallelism during motions between the specific test postures and employs a low-cost measuring system composed of standard comparator indicators attached to the universal magnetic stands. They are sequentially used for measuring the deviation of the relevant leg location while the manipulator moves the TCP along the Cartesian axes. Using the measured differences, the developed algorithm estimates the joint offsets and the leg lengths that are treated as the most essential parameters. Validity of the proposed calibration technique is confirmed by the experimental results.

cs.RO↗

arXiv2007

Design of a 3 Axis Parallel Machine Tool for High Speed Machining: The Orthoglide

The Orthoglide project aims at designing a new 3-axis machine tool for High Speed Machining. Basis kinematics is a 3 degree-of-freedom translational parallel mechanism. This basis was submitted to isotropic and manipulability constraints that allowed the optmization of its kinematic architecture and legs architecture. Thus, several leg morphologies are convenient for the chosen mechanism. We explain the process that led us to the choice we made for the Orthoglide. A static study is presented to show how singular configurations of the legs can cause stiffness problems.

cs.RO↗

arXiv2007

The Isoconditioning Loci of Planar Three-DOF Parallel Manipulators

The subject of this paper is a special class of parallel manipulators. First, we analyze a family of three-degree-of-freedom manipulators. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the "inverse kinematics" and the "direct kinematics" matrices. The singular configurations of these matrices are studied. The isotropic configurations are then studied based on the characteristic length of this manipulator. The isoconditioning loci of all Jacobian matrices are computed to define a global performance index to compare the different working modes.

cs.RO↗

arXiv2007

A Novel method for the design of 2-DOF Parallel mechanisms for machining applications

Parallel Kinematic Mechanisms (PKM) are interesting alternative designs for machine tools. A design method based on velocity amplification factors analysis is presented in this paper. The comparative study of two simple two-degree-of-freedom PKM dedicated to machining applications is led through this method: the common desired properties are the largest square Cartesian workspace for given kinetostatic performances. The orientation and position of the Cartesian workspace are chosen to avoid singularities and to produce the best ratio between Cartesian workspace size and mechanism size. The machine size of each resulting design is used as a comparative criterion.

cs.RO↗

arXiv2007

Design of a Three-Axis Isotropic Parallel Manipulator for Machining Applications: The Orthoglide

The orthoglide is a 3-DOF parallel mechanism designed at IRCCyN for machining applications. It features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The orthoglide has been designed as function of a prescribed Cartesian workspace with prescribed kinetostatic performances. The interesting features of the orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. A small-scale prototype of the orthoglide under development is presented at the end of this paper.

cs.RO↗

arXiv2007

Workspace Analysis of the Orthoglide using Interval Analysis

This paper addresses the workspace analysis of the orthoglide, a 3-DOF parallel mechanism designed for machining applications. This machine features three fixed parallel linear joints which are mounted orthogonally and a mobile platform which moves in the Cartesian x-y-z space with fixed orientation. The workspace analysis is conducted on the bases of prescribed kinetostatic performances. The interesting features of the orthoglide are a regular Cartesian workspace shape, uniform performances in all directions and good compactness. Interval analysis based methods for computing the dextrous workspace and the largest cube enclosed in this workspace are presented.

cs.RO↗