arXiv subjects

Pier Giuseppe Ledda

Publications and source records attributed to Pier Giuseppe Ledda.

11 recordsLinked to original sources

arXiv2026

Thin-film drainage becomes singular at saddles

From coating curved parts to creeping lava, thin-film gravitational drainage over complex surfaces can produce abrupt accumulation, usually associated with sharp edges or defects. Here, experiments, simulations and asymptotics show that a smooth saddle alone generates a logarithmically singular ridge, regularized within a dynamic region where drainage balances hydrostatic pressure and capillarity. In a Newtonian lubrication picture, this mechanism can inform redistribution in manufacturing and geophysics, motivating extensions to complex rheology and interacting geometric features.

physics.flu-dyn↗

arXiv2026

Nested homogenization of xylem-inspired porous fluidic networks

Fluidic networks may contain hierarchical porous structures in which transport across macroscopic interfaces is controlled by geometrical features at multiple nested length scales. Direct resolution of all these scales rapidly becomes computationally prohibitive for network-scale studies, while reduced descriptions require a priori effective hydraulic properties. Here, we develop a nested homogenization framework for rigid porous interfaces under single-phase viscous flow. The pore-scale structure is first replaced by an effective stress-jump interface law, which is then embedded as an internal interface condition within a second characteristic problem at the intermediate scale. This successive upscaling propagates the pore-scale geometry through effective tensors to obtain a closure for flow across the whole porous structure. The approach is validated against fully resolved simulations at the mesoscopic and macroscopic scales, for two xylem-inspired channel configurations, and accurately captures pressure drops and flow redistribution while strongly reducing computational cost. The framework provides a tractable bottom-up description of a network composed of nested porous membranes and a basis for extensions to deformable structures and multiphase flows.

physics.flu-dyn↗

arXiv2025

Fluid-induced snap-through instability of spherical shells

We study the snapping instability of a spherical elastic shell induced by a viscous flow, the umbrella flipping problem when life is at low Reynolds numbers. We combine precision desktop-scale experiments, fluid-structure simulations, shell theory, fluid mechanics, and scaling analysis to determine the instability threshold as a function of the geometrical and material parameters of the system. Building on these findings, we devise a snapping-based valve that passively and abruptly alters the hydraulic resistance of a channel, offering robust flow control without active components. Beyond the application, our study presents what we believe to be a prototypical example of fluid-induced elastic instability in viscous flow, providing a foundation for future explorations in soft hydraulics and flow-responsive structures.

physics.flu-dyn↗

arXiv2025

Effective flows across diffusio-phoretic membranes

Flows enabled by phoretic mechanisms are of significant interest in several biological and biomedical processes, such as bacterial motion and targeted drug delivery. Here, we develop a homogenization-based macroscopic boundary condition which describes the effective flow across a diffusiophoretic microstructured membrane, where the interaction between the membrane walls and the solute particles is modeled via a potential-approach. We consider two cases where potential variations occur (i) at the pore scale and (ii) only in the close vicinity of the boundary, enabling a simplified version of the macroscopic flow description, in the latter case. Chemical interactions at the microscale are rigorously upscaled to macroscopic phoretic solvent velocity and solute flux contributions, and added to the classical permeability and diffusivity properties of the membrane. These properties stem from the solution of Stokes-advection-diffusion problems at the microscale, some of them forced by an interaction potential term. Eventually, we show an application of the macroscopic model to develop minimal phoretic pumps, showcasing its suitability for efficient design and optimization procedures.

physics.flu-dyn↗

arXiv2024

Passive viscous flow selection via fluid-induced buckling

We study the buckling of a clamped beam immersed in a creeping flow within a rectangular channel. Via a combination of precision experiments, simulations, and theoretical modeling, we show how the instability depends on a pressure feedback mechanism and rationalize it in terms of dimensionless parameters. As the beam can bend until touching the wall above a critical flow rate, we finally demonstrate how the system can be used as a tunable passive flow selector, effectively redirecting the flow within a designed hydraulic circuit.

cond-mat.soft↗

arXiv2024

Releasing trapped Taylor bubbles via centrifugation and inclination

In confined systems, the entrapment of a gas volume with an equivalent spherical diameter greater than the dimension of the channel can form extended bubbles that obstruct fluid circuits and compromise performance. Notably, in sealed vertical tubes, buoyant long bubbles -- called Taylor bubbles -- cannot rise if the inner tube radius is below a critical value near the capillary length. This critical threshold for steady ascent is determined by geometric constraints related to matching the upper cap shape with the lubricating film in the elongated part of the bubble. Developing strategies to overcome this threshold and release stuck bubbles is essential for applications involving narrow liquid channels. Effective strategies involve modifying matching conditions with an external force field to facilitate bubble ascent. However, it's unclear how changes in acceleration conditions affect the motion onset of buoyancy-driven long bubbles. This study investigates the mobility of elongated bubbles in sealed tubes with an inner radius near the critical value inhibiting bubble motion in a vertical setting. Two strategies are explored to tune bubble motion, leveraging variations in axial and transversal accelerations: tube rotation around its axis and tube inclination relative to gravity. By revising the geometrical constraints of the simple vertical setting, the study predicts new thresholds based on rotational speed and tilt angle, respectively, providing forecasts for the bubble rising velocity under modified apparent gravity. Experimental measurements of motion threshold and rising velocity compare well with theoretical developments, thus suggesting practical approaches to control and tune bubble motion in confined environments.

physics.flu-dyn↗

arXiv2024

Quasi-Linear Homogenization for Large-Inertia Laminar Transport across Permeable Membranes

Porous membranes are thin solid structures that allow the flow to pass through their tiny openings, called pores. Flow inertia may play a significant role in several filtration flows of natural and engineering interest. Here, we develop a predictive macroscopic model to describe solvent and solute flows past thin membranes for non-negligible inertia. We leverage homogenization theory to link the solvent velocity and solute concentration to the jumps of solvent stress and solute flux across the membrane. Within this framework, the membrane acts as a boundary separating two distinct fluid regions. These jump conditions rely on several coefficients, stemming from closure problems at the microscopic pore scale. Two approximations for the advective terms of Navier-Stokes and advection-diffusion equations are introduced to include inertia in the microscopic problem. The approximate inertial terms couple the micro- and macroscopic fields. Here, this coupling is solved numerically using an iterative fixed-point procedure. We compare the resulting models against full-scale simulations, with a good agreement both in terms of averaged values across the membrane and far-field values. Eventually, we develop a strategy based on unsupervised machine learning to improve the computational efficiency of the iterative procedure. The extension of homogenization toward weak-inertia flow configurations as well as the performed data-driven approximation may find application in preliminary analyses as well as optimization procedures toward the design of filtration systems, where inertia effects can be instrumental in broadening the spectrum of permeability and selectivity properties of these filters.

physics.flu-dyn↗

arXiv2022

Gravity-driven coatings on curved substrates: a differential geometry approach

Although the drainage and spreading processes of thin liquid films on substrates have received growing attention during the last decades, the study of three-dimensional cases is limited to a few studies on flat and axisymmetric substrates. In this work, we exploit differential geometry to study the drainage and spreading of thin films on generic curved substrates. We initially investigate the drainage and spreading processes on spheroidal and paraboloidal substrates by employing an asymptotic expansion in the vicinity of the pole and a self-similar approach, finding that the thickness distribution is set by the substrate metric and tangential gravity force components. Spheroids with a large ratio between height and equatorial radius are characterized by a growing thickness moving away from the pole, and vice versa. The non-symmetric coating on a toroidal substrate shows that larger thicknesses and a faster spreading are attained on the inner region than on the outer region of the torus. An ellipsoid with three different axes is chosen as a testing ground for three-dimensional drainage and spreading. Modulations in the drainage solution are observed, with a different variation of the thickness along the two axes. By imposing the conservation of mass, an analytical solution for the average spreading front is obtained. The analytical and numerical results are in good agreement. The resulting drainage solutions show also a good agreement with experimental measurements obtained from the coating of a curing polymer on diverse substrates.

physics.flu-dyn↗

arXiv2021

Too fast to grow: Dynamics of pendant drops sliding on a thin film

Pendant drops suspended on the underside of a wet substrate are known to accumulate fluid from the surrounding thin liquid film, a process that often results in dripping. The growth of such drops is hastened by their ability to translate over an otherwise uniform horizontal film. Here we show that this scenario is surprisingly reversed when the substrate is slightly tilted ($\approx 2$ deg) ; drops become too fast to grow and shrink over the course of their motion. Combining experiments and numerical simulations, we rationalize the transition between the conventional growth regime and the previously unknown decay regime we report. Using an analytical treatment of the Landau-Levich meniscus that connects the drop to the film, we quantitatively predict the drop dynamics in the two flow regimes and the value of the critical inclination angle where the transition between them occurs.

physics.flu-dyn↗

arXiv2021

Prediction of Self-Assembled Dewetted Nanostructures for Photonics Applications via a Continuum Mechanics Framework

When a liquid film lies on a non-wettable substrate, the configuration is unstable and the film then retracts from a solid substrate to form droplets. This phenomenon, known as dewetting, commonly leads to undesirable morphological changes. Nevertheless, recent works have demonstrated the possibility to harness dewetting by employing templated substrates with a degree of precision on par with advanced lithographic processes for high-performance nanophotonic applications. Since resonant behavior is highly sensitive to geometrical changes, predicting quantitatively dewetting dynamics is of high interest. In this work, we develop a continuum model that predicts the evolution of a thin film on a patterned substrate, from the initial reflow to the nucleation and growth of holes. We provide an operative framework based on macroscopic measurements to model the intermolecular interactions at the origin of the dewetting process, involving length scales that span from sub-nanometer to micron range. A comparison of experimental and simulated results shows that the model can accurately predict the final distributions, thereby offering novel predictive tools to tailor the optical response of dewetted nanostructures.

physics.flu-dyn↗

arXiv2018

Suppression of von Kármán vortex streets past porous rectangular cylinders

Although the stability properties of the wake past impervious bluff bodies have been widely examined in the literature, similar analyses regarding the flow around and through porous ones are still lacking. In this work, the effect of the porosity and permeability on the wake patterns of porous rectangular cylinders is numerically investigated at low to moderate Reynolds numbers in the framework of direct numerical simulation combined with local and global stability analyses. A modified Darcy-Brinkman formulation is employed here so as to describe the flow behavior inside the porous media, where also the convective terms are retained to correctly account for the inertial effects at high values of permeability. Different aspect ratios of the cylinder are considered, varying the thickness-to-height ratios, t/d, from 0.01 (flat plate) to 1.0 (square cylinder). The results show that the permeability of the bodies has a strong effect in modifying the characteristics of the wakes and of the associated flow instabilities, while the porosity weakly affects the resulting flow patterns. In particular, the fluid flows through the porous bodies and, thus, as the permeability is progressively increased, the recirculation regions, initially attached to the rear part of the bodies, at first detach from the body and, eventually, disappear even in the near wakes. Global stability analyses lead to the identification of critical values of the permeability above which any linear instability is prevented. Moreover, a different scaling of the non-dimensional permeability allows to identify a general threshold for all the configurations here studied that ensures the suppression of vortex shedding, at least in the considered parameter space.

physics.flu-dyn↗