arXiv subjects
Publications and source records attributed to Pierre Brochard.
We demonstrate distributed acoustic sensing on deployed buried cable leveraging laser frequency stabilization and probing code optimization. Our results confirm the capability to accurately localize weak events with high resolution and sensitivity over 80 km.
We demonstrate sub-meter resolution Coherent DFS and detect acoustic oscillations using a stabilized laser on 20 km of anti-resonant HCF with <0.10 dB/km loss without impacting live traffic of 1.2 Tbps on the adjacent channel.
We estimate the laser frequency noise impact on coherent sensing using Distributed Fiber Sensing model. By stabilizing the laser in the estimated frequency zone, we demonstrate reduced noise floor over 100km using optimized probing codes
Hybrid integrated diode lasers based on combining semiconductor optical amplifiers with low-loss Si3N4-based feedback circuits enable great laser performance for advanced photonic circuits. In particular, using high-Q Si3N4 ring resonators for frequency-selective feedback provides wide spectral coverage, mode-hop free tuning, and high frequency stability on short timescales, showing as ultra-narrow intrinsic linewidths. However, many applications also require long-term stability, which can be provided by locking the laser frequency to a suitable reference. We present the stabilization of a hybrid-integrated laser, which is widely tunable around the central wavelength of 1550 nm, to a fiber-based optical frequency discriminator (OFD) and to an acetylene absorption line. By locking the laser to the OFD, the laser's fractional frequency stability is improved down to 2.1$\cdot$10$^{-12}$ over an averaging time of 0.5 ms. For absolute stability over longer times of several days, we successfully lock the laser frequency to an acetylene absorption line. This limits the frequency deviations of the laser to a range of less than 12 MHz over 5 days.
The synthesis of ultralow-noise microwaves is of both scientific and technological relevance for timing, metrology, communications and radio-astronomy. Today, the lowest reported phase noise signals are obtained via optical frequency-division using mode-locked laser frequency combs. Nonetheless, this technique ideally requires high repetition rates and tight comb stabilisation. Here, a soliton microcomb with a 14 GHz repetition rate is generated with an ultra-stable pump laser and used to derive an ultralow-noise microwave reference signal, with an absolute phase noise level below -60 dBc/Hz at 1 Hz offset frequency and -135 dBc/Hz at 10 kHz. This is achieved using a transfer oscillator approach, where the free-running microcomb noise (which is carefully studied and minimised) is cancelled via a combination of electronic division and mixing. Although this proof-of-principle uses an auxiliary comb for detecting the microcomb's offset frequency, we highlight the prospects of this method with future self-referenced integrated microcombs and electro-optic combs, that would allow for ultralow-noise microwave and sub-terahertz signal generators.