Searcharxiv⌕ Search

arXiv subjects

Pierre Kern

Publications and source records attributed to Pierre Kern.

18 recordsLinked to original sources
arXiv2024

Experimental tests of the calibration of high precision differential astrometry for exoplanets

High precision differential Astrometry is the branch of astronomy that evaluates the relative position, distance and motion of celestial objects with respect to the stars present in the field of view. A mission called Theia has been submitted in 2022 for ESA's M7 call for missions, using a diffraction-limited telescope about 1m in diameter and with a field of view of 0.5 degrees, capable of achieving sub-micro-arcsecond angular accuracy, corresponding to 1e-5 pixel on the detector. Such precision makes it possible to study the nature of dark matter in our galaxy and to reveal the architecture of exoplanetary systems close to the Sun, down to the mass of the Earth. The aim of the experimental tests presented in this poster is to improve the TRL of 2 specific aspects: the calibration of new CMOS detectors with very large number of pixels and the calibration of the telescope aberrations.First, a key element of such a space telescope is the focal plane, which must be calibrated spatially with an extreme precision down to the 1e-5 pixel level. Previous work has shown that this is possible with small detector matrices (80x80 px) [1]. The goal is now to check the performances and validate this method with the new very large detectors. Pyxalis, a company based near Grenoble, is developing very large detectors (8000x5000 px) that have a low noise level and high sensitivity. The aim is to characterize and validate this type of detectors in a laboratory demonstration (see poster Pancher et al.), to ensure that the performance achieved meets the required specifications. We present the results of these characterization in this contribution.The telescope stability is also a sensitive issue. Recent work [2] has shown that the reference stars in the field of the telescope can be used as actual metrology sources in order to compute the field distortion function. Our simulations allow to model the optical aberrations with bivariate polynoms. The effects on the calibration accuracy of the degrees of the polynoms, the number of reference stars and the tilt perturbation of the M2 mirror are investigated. This poster will present the latest results obtained on a test bed developed to experimentally study the performances of this new field calibration method.

astro-ph.IM↗
arXiv2024

Laboratory characterisation bench for high precision astrometry

High precision differential astrometry assesses the positions, distances, and motions of celestial objects in relation to the stars. The focal plane of such space telescope must be calibrated with a precision down to the level of 1e-5 pixel in order to be able to detect Earth-like planets in the close vicinity of the Sun. The presented characterization bench is designed to improve the technology readiness level for the following key points: calibration of new detectors with a high number of pixels and correcting the field distortion using stars in the field of view. The first aim of the project concentrates on the characterization of a 46 megapixels sensor from PYXALIS, to assess its typical parameters using an integrating sphere. The next objective intends to map the intra and extra pixel quantum yield of the detector with a precision of 1e-5 pixels and investigate the evolution of the pixel geometry in response to environment fluctuations. To conduct these tests, an optical bench is designed with an LCD screen and a doublet, used as a source that allows directing light to specific groups of pixels. Interferometric calibration of the detector pixel centroid position will be achieved using fibers that illuminate the detector with Young's fringes. To characterize the distortion of the detector, a diaphragm will produce adjustable optical aberrations to be corrected and therefore change the source sensor positional relationship. The final step involves the simulation of a star's field, which will be imaged on the detector to assess optical quality.

astro-ph.IM↗
arXiv2011

Searching for faint companions with VLTI/PIONIER. I. Method and first results

Context. A new four-telescope interferometric instrument called PIONIER has recently been installed at VLTI. It provides improved imaging capabilities together with high precision. Aims. We search for low-mass companions around a few bright stars using different strategies, and determine the dynamic range currently reachable with PIONIER. Methods. Our method is based on the closure phase, which is the most robust interferometric quantity when searching for faint companions. We computed the chi^2 goodness of fit for a series of binary star models at different positions and with various flux ratios. The resulting chi^2 cube was used to identify the best-fit binary model and evaluate its significance, or to determine upper limits on the companion flux in case of non detections. Results. No companion is found around Fomalhaut, tau Cet and Regulus. The median upper limits at 3 sigma on the companion flux ratio are respectively of 2.3e-3 (in 4 h), 3.5e-3 (in 3 h) and 5.4e-3 (in 1.5 h) on the search region extending from 5 to 100 mas. Our observations confirm that the previously detected near-infrared excess emissions around Fomalhaut and tau Cet are not related to a low-mass companion, and instead come from an extended source such as an exozodiacal disk. In the case of del Aqr, in 30 min of observation, we obtain the first direct detection of a previously known companion, at an angular distance of about 40 mas and with a flux ratio of 2.05e-2 \pm 0.16e-2. Due to the limited u,v plane coverage, its position can, however, not be unambiguously determined. Conclusions. After only a few months of operation, PIONIER has already achieved one of the best dynamic ranges world-wide for multi-aperture interferometers. A dynamic range up to about 1:500 is demonstrated, but significant improvements are still required to reach the ultimate goal of directly detecting hot giant extrasolar planets.

astro-ph.EP↗
arXiv2011

First fringes with an integrated-optics beam combiner at 10 um - A new step towards instrument miniaturization for mid-infrared interferometry

Observations at mas-resolution scales and high dynamic range hold a central place in achieving, for instance, the spectroscopic characterization of exo-Earths or the detailed mapping of their protoplanetary disc birthplace. Ground or space-based multi-aperture infrared interferometry is a promising technique to tackle these goals. But significant efforts still need to be undertaken to achieve a simplification of these instruments if we want to combine the light from a large number of telescopes. Integrated-optics appears as an alternative to the current conventional designs, especially if its use can be extended to a higher number of astronomical bands. This article reports for the first time the experimental demonstration of the feasibility of an integrated-optics approach to mid-infrared beam combination for single-mode stellar interferometry. We have fabricated a 2-telescope beam combiner prototype integrated on a substrate of chalcogenide glasses, a material transparent from 1 to 14 um. We have developed laboratory tools to characterize the modal properties and the interferometric capabilities of our device. We obtain fringes at 10 um and measure a mean contrast V=0.981 \pm 0.001 with high repeatability over one week and high stability over 5h. We show experimentally - as well as on the basis of modeling considerations - that the component has a single-mode behavior at this wavelength, which is essential to achieve high-accuracy interferometry. From previous studies, the propagation losses are estimated to 0.5 dB/cm for such components. We also discuss possible issues that may impact the interferometric contrast. The IO beam combiner performs well at 10. We also anticipate the requirement of a better matching between the numerical apertures of the component and the (de)coupling optics to optimize the total throughput. The next step foreseen is the achievement of wide-band interferograms.

astro-ph.IM↗
arXiv2010

The Planar Optics Phase Sensor: a study for the VLTI 2nd Generation Fringe Tracker

In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

astro-ph.IM↗
arXiv2009

Infrared Detection and Characterization of Debris Disks, Exozodiacal Dust, and Exoplanets: The FKSI Mission Concept

The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a nulling interferometer for the near-to-mid-infrared spectral region. FKSI is conceived as a mid-sized strategic or Probe class mission. FKSI has been endorsed by the Exoplanet Community Forum 2008 as such a mission and has been costed to be within the expected budget. The current design of FKSI is a two-element nulling interferometer. The two telescopes, separated by 12.5 m, are precisely pointed (by small steering mirrors) on the target star. The two path lengths are accurately controlled to be the same to within a few nanometers. A phase shifter/beam combiner (Mach-Zehnder interferometer) produces an output beam consisting of the nulled sum of the target planet's light and the host star's light. When properly oriented, the starlight is nulled by a factor of 10^-4, and the planet light is undiminished. Accurate modeling of the signal is used to subtract the residual starlight, permitting the detection of planets much fainter than the host star. The current version of FKSI with 0.5-m apertures and waveband 3-8 microns has the following main capabilities: (1) detect exozodiacal emission levels to that of our own solar system (1 Solar System Zodi) around nearby F, G, and K, stars; (2) characterize spectroscopically the atmospheres of a large number of known non-transiting planets; (3) survey and characterize nearby stars for planets down to 2 Earth radii from just inside the habitable zone and inward. An enhanced version of FKSI with 1-m apertures separated by 20 m and cooled to 40 K, with science waveband 5-15 microns, allows for the detection and characterization of 2 Earth-radius super-Earths and smaller planets in the habitable zone around stars within about 30 pc.

astro-ph.IM↗
arXiv2009

On-chip spectro-detection for fully integrated coherent beam combiners

This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection principle aimed at directly sampling and extracting the spectral information of an input signal together with its flux level measurement. The so-called SWIFTS demonstrated concept that stands for Stationary-Wave Integrated Fourier Transform Spectrometer, provides full spectral and spatial information recorded simultaneously thanks to a motionless detecting device. Due to some newly available detection principles considered for the implementation of the SWIFTS concept, some technologies can even provide photo-counting operation that brought a significant extension of the interferometry domain of investigation in astrophysics . The proposed concept is applicable to most of the interferometric instrumental modes including fringe tracking, fast and sensitive detection, Fourier spectral reconstruction and also to manage a large number of incoming beams. The paper presents three practical implementations, two dealing with pair-wise integrated optics beam combinations and the third one with an all-in-one 8 beam combination. In all cases the principles turned into a pair wise baseline coding after proper data processing.

astro-ph.IM↗
arXiv2009

Astrophotonics: a new era for astronomical instruments

Astrophotonics lies at the interface of astronomy and photonics. This burgeoning field -- now formally recognized by the optics community -- has emerged over the past decade in response to the increasing demands of astronomical instrumentation. Early successes include: (i) planar waveguides to combine signals from widely spaced telescopes in stellar interferometry; (ii) frequency combs for ultra-high precision spectroscopy to detect planets around nearby stars; (iii) ultra-broadband fibre Bragg gratings to suppress unwanted background; (iv) photonic lanterns that allow single-mode behaviour within a multimode fibre; (v) planar waveguides to miniaturize astronomical spectrographs; (vi) large mode area fibres to generate artificial stars in the upper atmosphere for adaptive optics correction; (vii) liquid crystal polymers in optical vortex coronographs and adaptive optics systems. Astrophotonics, a field that has already created new photonic capabilities, is now extending its reach down to the Rayleigh scattering limit at ultraviolet wavelengths, and out to mid infrared wavelengths beyond 2500nm.

astro-ph.IM↗
arXiv2008

Transmission behaviors of single mode hollow metallic waveguides dedicated to mid-infrared nulling interferometry

This paper reports the characterization of hollow metallic waveguides (HMW) to be used as single-mode wavefront filters for nulling interferometry in the 6-20 microns range. The measurements presented here were performed using both single-mode and multimode conductive waveguides at 10.6 microns. We found propagation losses of about 16dB/mm, which are mainly due to the theoretical skin effect absorption in addition to the roughness of the waveguide metallic walls. The input and output coupling efficiency of our samples has been improved by adding tapers to minimize the impedance mismatch. A proper distinction between propagation losses and coupling losses is presented. Despite their elevate propagation losses, HMW show excellent spatial filtering capabilities in a spectral range where photonics technologies are only emerging.

astro-ph↗
arXiv2007

Wavelength-scale stationary-wave integrated Fourier-transform spectrometry

Spectrometry is a general physical-analysis approach for investigating light-matter interactions. However, the complex designs of existing spectrometers render them resistant to simplification and miniaturization, both of which are vital for applications in micro- and nanotechnology and which are now undergoing intensive research. Stationary-wave integrated Fourier-transform spectrometry (SWIFTS)-an approach based on direct intensity detection of a standing wave resulting from either reflection (as in the principle of colour photography by Gabriel Lippmann) or counterpropagative interference phenomenon-is expected to be able to overcome this drawback. Here, we present a SWIFTS-based spectrometer relying on an original optical near-field detection method in which optical nanoprobes are used to sample directly the evanescent standing wave in the waveguide. Combined with integrated optics, we report a way of reducing the volume of the spectrometer to a few hundreds of cubic wavelengths. This is the first attempt, using SWIFTS, to produce a very small integrated one-dimensional spectrometer suitable for applications where microspectrometers are essential.

physics.optics↗
arXiv2006

M-lines characterization of selenide and telluride waveguides for mid-infrared interferometry

Nulling interferometry is an astronomical technique that combines equal wavefronts to achieve a deep rejection ratio of an on-axis star, and that could permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns. Similarly to what is done in the near-infrared, high frequencies spatial filtering of the incoming beams can be achieved using single-mode waveguides operating in the mid-infrared. An appreciable reduction of the instrumental complexity is also possible using integrated optics (IO) devices in this spectral range. The relative lack of single-mode guided optics in the mid-infrared has motivated the present technological study to demonstrate the feasibility of dielectric waveguides functioning at longer wavelengths. We propose to use selenide and telluride components to pursue the development of more complex IO functions.

astro-ph↗
arXiv2006

VSI: a milli-arcsec spectro-imager for the VLTI

VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A.

astro-ph↗
arXiv2005

Integrated optics for astronomical interferometry - VI. Coupling the light of the VLTI in K band

Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stability of a few percent. Even if a dispersive phase is present, we show that it does not bias the measured Fourier visibility estimate. An upper limit of 0.005 for the cross-talk between linear polarization states has been measured. We take advantage of the intrinsic contrast stability to test a new astronomical prodecure for calibrating diameters of simple stars by simultaneously fitting the instrumental contrast and the apparent stellar diameters. This method reaches an accuracy with diameter errors of the order of previous ones but without the need of an already known calibrator. These results are an important step of integrated optics and paves the road to incoming imaging interferometer projects.

astro-ph↗
arXiv2005

Planar Integrated Optics and astronomical interferometry

Integrated optics (IO) is an optical technology that allows to reproduce optical circuits on a planar substrate. Since 1996, we have investigated the potentiality of IO in the framework of astronomical single mode interferometry. We review in this paper the principles of IO, the requirements for interferometry and the corresponding solutions offered by IO, the results of component characterization and the possible fields of application.

astro-ph↗
arXiv2005

VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution

The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.

astro-ph↗
arXiv2003

Hot Very Small dust Grains in NGC 1068 seen in jet induced structures thanks to VLT/NACO adaptive optics

We present K, L and M diffraction-limited images of NGC 1068 obtained with NAOS+CONICA at VLT/YEPUN over a 3.5" field around the central engine. Hot dust (Tcol = 550-650 K) is found in three different regions : (a) in the true nucleus, seen as a slightly NS elongated, core of extremely hot dust, "resolved" in K and L with respective diameters of ~5 pc and 8.5 pc ; (b) along the NS direction, as a "spiral arm" and a southern tongue ; (c) as a set of parallel elongated nodules ("wave-like") bracketting the jet. Several structures observed on radio maps, mid-IR or HST UV-visible maps are seen, so that a precise registration can be done from UV to 6 cm. These results do support the current interpretion that source (a) corresponds to emission from dust near sublimation temperature delimiting the walls of the cavity in the central obscuring torus. Structure (b) is thought to be a mixture of hot dust and active star forming regions along a micro spiral structure that could trace the tidal mechanism bringing matter to the central engine. Structure c)which was not known, exhibits too high a temperature for "classical'' grains ; it is most probably the signature of transiently heated very small dust grains (VSG) : "nano-diamonds", which are resistant and can form in strong UV field or in shocks, are very attractive candidates. The "waves'' can be condensations triggered by jet induced shocks, as predicted by recent models. First estimates, based on a simple VSG model and on a detailed radiative transfer model, do agree with those interpretations, both qualitatively and quantitatively.

astro-ph↗