arXiv subjects

Pierre-Antoine Mouny

Publications and source records attributed to Pierre-Antoine Mouny.

6 recordsLinked to original sources

arXiv2025

Towards a Cryogenic CMOS-Memristor Neural Decoder for Quantum Error Correction

This paper presents a novel approach utilizing a scalable neural decoder application-specific integrated circuit (ASIC) based on metal oxide memristors in a 180nm CMOS technology. The ASIC architecture employs in-memory computing with memristor crossbars for efficient vector-matrix multiplications (VMM). The ASIC decoder architecture includes an input layer implemented with a VMM and an analog sigmoid activation function, a recurrent layer with analog memory, and an output layer with a VMM and a threshold activation function. Cryogenic characterization of the ASIC is conducted, demonstrating its performance at both room temperature and cryogenic temperatures down to 1.2K. Results indicate stable activation function shapes and pulse responses at cryogenic temperatures. Moreover, power consumption measurements reveal consistent behavior at room and cryogenic temperatures. Overall, this study lays the foundation for developing efficient and scalable neural decoders for quantum error correction in cryogenic environments.

quant-ph↗

arXiv2024

A Cryogenic Memristive Neural Decoder for Fault-tolerant Quantum Error Correction

Neural decoders for quantum error correction (QEC) rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders a promising candidate for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix-vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiOx-based memristive devices' non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder's pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant QEC.

quant-ph↗

arXiv2024

Towards scalable cryogenic quantum dot biasing using memristor-based DC sources

Cryogenic memristor-based DC sources offer a promising avenue for in situ biasing of quantum dot arrays. In this study, we present experimental results and discuss the scaling potential for such DC sources. We first demonstrate the operation of a commercial discrete operational amplifier down to 1.2K which is used on the DC source prototype. Then, the tunability of the memristor-based DC source is validated by performing several 250mV-DC sweeps with a resolution of 10mV at room temperature and at 1.2K. Additionally, the DC source prototype exhibits a limited output drift of $\approx1\mathrm{μVs^{-1}}$ at 1.2K. This showcases the potential of memristor-based DC sources for quantum dot biasing. Limitations in power consumption and voltage resolution using discrete components highlight the need for a fully integrated and scalable complementary metal-oxide-semiconductor-based (CMOS-based) approach. To address this, we propose to monolithically co-integrate emerging non-volatile memories (eNVMs) and 65nm CMOS circuitry. Simulations reveal a reduction in power consumption, down to $\mathrm{10μW}$ per DC source and in footprint. This allows for the integration of up to one million eNVM-based DC sources at the 4.2K stage of a dilution fridge, paving the way for near term large-scale quantum computing applications.

cs.ET↗

arXiv2023

Analog programming of CMOS-compatible Al$_2$O$_3$/TiO$_\textrm{2-x}$ memristor at 4.2 K after metal-insulator transition suppression by cryogenic reforming

The exploration of memristors' behavior at cryogenic temperatures has become crucial due to the growing interest in quantum computing and cryogenic electronics. In this context, our study focuses on the characterization at cryogenic temperatures (4.2 K) of TiO$_\textrm{2-x}$-based memristors fabricated with a CMOS-compatible etch-back process. We demonstrate a so-called cryogenic reforming (CR) technique performed at 4.2 K to overcome the well-known metal-insulator transition (MIT) which limits the analog behavior of memristors at low temperatures. This cryogenic reforming process was found to be reproducible and led to a durable suppression of the MIT. This process allowed to reduce by approximately 20% the voltages required to perform DC resistive switching at 4.2 K. Additionally, conduction mechanism studies of memristors before and after cryogenic reforming from 4.2 K to 300 K revealed different behaviors above 100 K, indicating a potential change in the conductive filament stoichiometry. The reformed devices exhibit a conductance level that is 50 times higher than ambient-formed memristor, and the conduction drop between 300 K and 4.2 K is 100 times smaller, indicating the effectiveness of the reforming process. More importantly, CR enables analog programming at 4.2 K with typical read voltages. Suppressing the MIT improved the analog switching dynamics of the memristor leading to approximately 250% larger on/off ratios during long-term depression (LTD)/long-term potentiation (LTP) resistance tuning. This enhancement opens up the possibility of using TiO$_{\textrm{2-x}}$-based memristors to be used as synapses in neuromorphic computing at cryogenic temperatures.

physics.app-ph↗

arXiv2023

Hardware-aware Training Techniques for Improving Robustness of Ex-Situ Neural Network Transfer onto Passive TiO2 ReRAM Crossbars

Passive resistive random access memory (ReRAM) crossbar arrays, a promising emerging technology used for analog matrix-vector multiplications, are far superior to their active (1T1R) counterparts in terms of the integration density. However, current transfers of neural network weights into the conductance state of the memory devices in the crossbar architecture are accompanied by significant losses in precision due to hardware variabilities such as sneak path currents, biasing scheme effects and conductance tuning imprecision. In this work, training approaches that adapt techniques such as dropout, the reparametrization trick and regularization to TiO2 crossbar variabilities are proposed in order to generate models that are better adapted to their hardware transfers. The viability of this approach is demonstrated by comparing the outputs and precision of the proposed hardware-aware network with those of a regular fully connected network over a few thousand weight transfers using the half moons dataset in a simulation based on experimental data. For the neural network trained using the proposed hardware-aware method, 79.5% of the test set's data points can be classified with an accuracy of 95% or higher, while only 18.5% of the test set's data points can be classified with this accuracy by the regularly trained neural network.

cs.AR↗

arXiv2022

Memristor-based cryogenic programmable DC sources for scalable in-situ quantum-dot control

Current quantum systems based on spin qubits are controlled by classical electronics located outside the cryostat at room temperature. This approach creates a major wiring bottleneck, which is one of the main roadblocks toward truly scalable quantum computers. Thus, we propose a scalable memristor-based programmable DC source that could be used to perform biasing of quantum dots inside of the cryostat (i.e. in-situ). This novel cryogenic approach would enable to control the applied voltage on the electrostatic gates by programming the resistance of the memristors, thus storing in the latter the appropriate conditions to form the quantum dots. In this study, we first demonstrate multilevel resistance programming of a TiO2-based memristors at 4.2 K, an essential feature to achieve voltage tunability of the memristor-based DC source. We then report hardwarebased simulations of the electrical performance of the proposed DC source. A cryogenic TiO2-based memristor model fitted on our experimental data at 4.2 K was used to show a 1 V voltage range and 100 uV in-situ memristor-based DC source. Finally, we simulate the biasing of double quantum dots enabling sub-2 minutes in-situ charge stability diagrams. This demonstration is a first step towards more advanced cryogenic applications for resistive memories such as cryogenic control electronics for quantum computers.

cs.AR↗