arXiv subjects

Pierre-François Loos

Publications and source records attributed to Pierre-François Loos.

At least 73 records · Page 4Linked to original sources

arXiv2021

A Mountaineering Strategy to Excited States: Highly-Accurate Energies and Benchmarks for Bicyclic Systems

Pursuing our efforts to define highly-accurate estimates of the relative energies of excited states in organic molecules, we investigate, with coupled-cluster methods including iterative triples (CC3 and CCSDT), the vertical excitation energies of 10 bicyclic molecules (azulene, benzoxadiazole, benzothiadiazole, diketopyrrolopyrrole, fuofuran, phthalazine, pyrrolopyrrole, quinoxaline, tetrathiafulvalene, and thienothiophene). In total, we provide \emph{aug}-cc-pVTZ reference vertical excitation energies for 91 excited states of these relatively large systems. We use these reference values to benchmark various wave function methods, i.e., CIS(D), EOM-MP2, CC2, CCSD, STEOM-CCSD, CCSD(T)(a)*, CCSDR(3), CCSDT-3, ADC(2), ADC(2.5), ADC(3), as well as some spin-scaled variants of both CC2 and ADC(2). These results are compared to those obtained previously on smaller molecules. It turns out that while the accuracy of some methods is almost unaffected by system size, e.g., CIS(D) and CC3, the performance of others can significantly deteriorate as the systems grow, e.g., EOM-MP2 and CCSD, whereas others, e.g., ADC(2) and CC2, become more accurate for larger derivatives.

physics.chem-ph↗

arXiv2021

Accurate full configuration interaction correlation energy estimates for five- and six-membered rings

Following our recent work on the benzene molecule [\href{https://doi.org/10.1063/5.0027617}{J.~Chem.~Phys.~\textbf{153}, 176101 (2020)}], itself motivated by the blind challenge of Eriksen \textit{et al.} [\href{https://doi.org/10.1021/acs.jpclett.0c02621}{J.~Phys.~Chem.~Lett.~\textbf{11}, 8922 (2020)}] on the same system, we report accurate full configuration interaction (FCI) frozen-core correlation energy estimates for twelve five- and six-membered ring molecules in the standard correlation-consistent double-$ζ$ Dunning basis set (cc-pVDZ). Our FCI correlation energy estimates, with estimated error smaller than 1 millihartree, are based on energetically optimized-orbital selected configuration interaction (SCI) calculations performed with the \textit{Configuration Interaction using a Perturbative Selection made Iteratively} (CIPSI) algorithm. Having at our disposal these accurate reference energies, the respective performance and convergence properties of several popular and widely-used families of single-reference quantum chemistry methods are investigated. In particular, we study the convergence properties of i) the Møller-Plesset perturbation series up to fifth-order (MP2, MP3, MP4, and MP5), ii) the iterative approximate coupled-cluster series CC2, CC3, and CC4, and iii) the coupled-cluster series CCSD, CCSDT, and CCSDTQ. The performance of the ground-state gold standard CCSD(T) as well as the completely renormalized CC model, CR-CC(2,3), are also investigated.

physics.chem-ph↗

arXiv2021

Variational coupled cluster for ground and excited states

In single-reference coupled-cluster (CC) methods, one has to solve a set of non-linear polynomial equations in order to determine the so-called amplitudes which are then used to compute the energy and other properties. Although it is of common practice to converge to the (lowest-energy) ground-state solution, it is also possible, thanks to tailored algorithms, to access higher-energy roots of these equations which may or may not correspond to genuine excited states. Here, we explore the structure of the energy landscape of variational CC (VCC) and we compare it with its (projected) traditional version (TCC) in the case where the excitation operator is restricted to paired double excitations (pCCD). By investigating two model systems (the symmetric stretching of the linear \ce{H4} molecule and the continuous deformation of the square \ce{H4} molecule into a rectangular arrangement) in the presence of weak and strong correlations, the performance of VpCCD and TpCCD are gauged against their configuration interaction (CI) equivalent, known as doubly-occupied CI (DOCI), for reference Slater determinants made of ground- or excited-state Hartree-Fock orbitals or state-specific orbitals optimized directly at the VpCCD level. The influence of spatial symmetry breaking is also investigated.

physics.chem-ph↗

arXiv2021

Iterative stochastic subspace self-consistent field method

We propose a new self-consistent field (SCF) algorithm based on an iterative, partially stochastic \textit{``Divide \& Conquer''}-type approach. This new SCF algorithm is a simple variant of the usual SCF procedure and can be easily implemented in parallel. A detailed description of the algorithm is reported. We illustrate this new method on one-dimensional hydrogen chains and three-dimensional hydrogen clusters.

physics.chem-ph↗

arXiv2021

Variations of the Hartree-Fock fractional-spin error for one electron

Fractional-spin errors are inherent in all current approximate density functionals, including Hartree-Fock theory, and their origin has been related to strong static correlation effects. The conventional way to encode fractional-spin calculations is to construct an ensemble density that scales between the high-spin and low-spin densities. In this article, we explore the variation of the Hartree-Fock fractional-spin (or ghost-interaction) error in one-electron systems using restricted and unrestricted ensemble densities, and the exact generalized Hartree-Fock representation. By considering the hydrogen atom and H$_2^+$ cation, we analyze how the unrestricted and generalized Hartree-Fock schemes minimize this error by localizing the electrons or rotating the spin coordinates. We also reveal a clear similarity between the Coulomb hole of He-like ions and the density depletion near the nucleus induced by the fractional-spin error in the unpolarized hydrogen atom. Finally, we analyze the effect of the fractional-spin error on the Møller-Plesset adiabatic connection, excited states, and functional- and density-driven errors.

physics.chem-ph↗

arXiv2021

Excited States From State Specific Orbital Optimized Pair Coupled Cluster

The pair coupled cluster doubles (pCCD) method (where the excitation manifold is restricted to electron pairs) has a series of interesting features. Among others, it provides ground-state energies very close to what is obtained with doubly-occupied configuration interaction (DOCI), but with polynomial cost (compared with the exponential cost of the latter). Here, we address whether this similarity holds for excited states, by exploring the symmetric dissociation of the linear \ce{H4} molecule. When ground-state Hartree-Fock (HF) orbitals are employed, pCCD and DOCI excited-state energies do not match, a feature that is assigned to the poor HF reference. In contrast, by optimizing the orbitals at the pCCD level (oo-pCCD) specifically for each excited state, the discrepancies between pCCD and DOCI decrease by one or two orders of magnitude. Therefore, the pCCD and DOCI methodologies still provide comparable energies for excited states, but only if suitable, state-specific orbitals are adopted. We also assessed whether a pCCD approach could be used to directly target doubly-excited states, without having to resort to the equation-of-motion (EOM) formalism. In our $Δ$oo-pCCD model, excitation energies were extracted from the energy difference between separate oo-pCCD calculations for the ground state and the targeted excited state. For a set comprising the doubly-excited states of \ce{CH+}, \ce{BH}, nitroxyl, nitrosomethane, and formaldehyde, we found that $Δ$oo-pCCD provides quite accurate excitation energies, with root mean square deviations (with respect to full configuration interaction results) lower than CC3 and comparable to EOM-CCSDT, two methods with much higher computational cost.

physics.chem-ph↗

arXiv2021

How accurate are EOM-CC4 vertical excitation energies?

We report the first investigation of the performance of EOM-CC4 -- an approximate equation-of-motion coupled-cluster model which includes iterative quadruple excitations -- for vertical excitation energies in molecular systems. By considering a set of 28 excited states in 10 small molecules for which we have computed CCSDTQP and FCI reference energies, we show that, in the case of excited states with a dominant contribution from the single excitations, CC4 yields excitation energies with sub-kJ~mol$^{-1}$ accuracy (i.e., error below $0.01$ eV), in very close agreement with its more expensive CCSDTQ parent. Therefore, if one aims at high accuracy, CC4 stands as a highly competitive approximate method to model molecular excited states, with a significant improvement over both CC3 and CCSDT. Our results also evidence that, although the same qualitative conclusions hold, one cannot reach the same level of accuracy for transitions with a dominant contribution from the double excitations.

physics.chem-ph↗

arXiv2021

Reference Energies for Intramolecular Charge-Transfer Excitations

In the aim of completing our previous efforts devoted to local and Rydberg transitions in organic compounds, we provide a series of highly-accurate vertical transition energies for intramolecular charge-transfer transitions occurring in ($π$-conjugated) molecular compounds. To this end we apply a composite protocol consisting of linear-response CCSDT excitation energies determined with Dunning's double-$ζ$ basis set corrected by CC3/CCSDT-3 energies obtained with the corresponding triple-$ζ$ basis. Further basis set corrections (up to \emph{aug}-cc-pVQZ) are obtained at the CCSD and CC2 level. We report 30 transitions obtained in 17 compounds. These reference values are then used to benchmark a series of wave function (CIS(D), SOPPA, RPA(D), EOM-MP2, CC2, CCSD, CCSD(T)(a)*, CCSDR(3), CCSDT-3, CC3, ADC(2), ADC(3), and ADC(2.5)), the Green's function-based Bethe-Salpeter equation (BSE) formalism performed on top of the partially self-consistent ev$GW$ scheme considering two different starting points (BSE/ev$GW$@HF and BSE/ev$GW$@PBE0), and TD-DFT combined with several exchange-correlation functionals (B3LYP, PBE0, M06-2X, CAM-B3LYP, LC-$ω$HPBE, $ω$B97X, $ω$B97X-D, and M11).

physics.chem-ph↗

arXiv2021

Spin-adapted selected configuration interaction in a determinant basis

Selected configuration interaction (SCI) methods, when complemented with a second-order perturbative correction, provide near full configuration interaction (FCI) quality energies with only a small fraction of the Slater determinants of the FCI space. However, a selection criterion based on determinants alone does not ensure a spin-pure wave function. In other words, such SCI wave functions are not eigenfunctions of the $S^2$ operator. In many situations (bond breaking, magnetic system, excited state, etc), having a spin-adapted wave function is essential for a quantitatively correct description of the system. Here, we propose an efficient algorithm which, given an arbitrary determinant space, generates all the missing Slater determinants allowing one to obtain spin-adapted wave functions while avoiding manipulations involving configuration state functions. For example, generating all the possible determinants with 6 spin-up and 6 spin-down electrons in 12 open shells takes 21 CPU cycles per generated Slater determinant. The selection is still done with individual determinants, and one can take advantage of the basis of configuration state functions in the diagonalization of the Hamiltonian to reduce significantly the memory footprint.

physics.chem-ph↗

arXiv2021

Spin-Conserved and Spin-Flip Optical Excitations From the Bethe-Salpeter Equation Formalism

Like adiabatic time-dependent density-functional theory (TD-DFT), the Bethe-Salpeter equation (BSE) formalism of many-body perturbation theory, in its static approximation, is "blind" to double (and higher) excitations, which are ubiquitous, for example, in conjugated molecules like polyenes. Here, we apply the spin-flip \textit{ansatz} (which considers the lowest triplet state as the reference configuration instead of the singlet ground state) to the BSE formalism in order to access, in particular, double excitations. The present scheme is based on a spin-unrestricted version of the $GW$ approximation employed to compute the charged excitations and screened Coulomb potential required for the BSE calculations. Dynamical corrections to the static BSE optical excitations are taken into account via an unrestricted generalization of our recently developed (renormalized) perturbative treatment. The performance of the present spin-flip BSE formalism is illustrated by computing excited-state energies of the beryllium atom, the hydrogen molecule at various bond lengths, and cyclobutadiene in its rectangular and square-planar geometries.

physics.chem-ph↗

arXiv2021

Perturbation Theory in the Complex Plane: Exceptional Points and Where to Find Them

We explore the non-Hermitian extension of quantum chemistry in the complex plane and its link with perturbation theory. We observe that the physics of a quantum system is intimately connected to the position of complex-valued energy singularities, known as exceptional points. After presenting the fundamental concepts of non-Hermitian quantum chemistry in the complex plane, including the mean-field Hartree--Fock approximation and Rayleigh--Schrödinger perturbation theory, we provide a historical overview of the various research activities that have been performed on the physics of singularities. In particular, we highlight seminal work on the convergence behaviour of perturbative series obtained within Møller--Plesset perturbation theory, and its links with quantum phase transitions. We also discuss several resummation techniques (such as Padé and quadratic approximants) that can improve the overall accuracy of the Møller--Plesset perturbative series in both convergent and divergent cases. Each of these points is illustrated using the Hubbard dimer at half filling, which proves to be a versatile model for understanding the subtlety of analytically-continued perturbation theory in the complex plane.

physics.chem-ph↗

arXiv2021

Benchmarking TD-DFT and Wave Function Methods for Oscillator Strengths and Excited-State Dipole Moments

Using a set of oscillator strengths and excited-state dipole moments of near full configuration interaction (FCI) quality determined for small compounds, we benchmark the performances of several single-reference wave function methods (CC2, CCSD, CC3, CCSDT, ADC(2), and ADC(3/2)) and time-dependent density-functional theory (TD-DFT) with various functionals (B3LYP, PBE0, M06-2X, CAM-B3LYP, and $ω$B97X-D). We consider the impact of various gauges (length, velocity, and mixed) and formalisms: equation of motion (EOM) \emph{vs} linear response (LR), relaxed \emph{vs} unrelaxed orbitals, etc. Beyond the expected accuracy improvements and a neat decrease of formalism sensitivy when using higher-order wave function methods, the present contribution shows that, for both ADC(2) and CC2, the choice of gauge impacts more significantly the magnitude of the oscillator strengths than the choice of formalism, and that CCSD yields a notable improvement on this transition property as compared to CC2. For the excited-state dipole moments, switching on orbital relaxation appreciably improves the accuracy of both ADC(2) and CC2, but has a rather small effect at the CCSD level. Going from ground to excited states, the typical errors on dipole moments for a given method tend to roughly triple. Interestingly, the ADC(3/2) oscillator strengths and dipoles are significantly more accurate than their ADC(2) counterparts, whereas the two models do deliver rather similar absolute errors for transition energies. Concerning TD-DFT, one finds: i) a rather negligible impact of the gauge on oscillator strengths for all tested functionals (except for M06-2X); ii) deviations of ca.~0.10 D on ground-state dipoles for all functionals; iii) the better overall performance of CAM-B3LYP for the two considered excited-state properties.

physics.chem-ph↗

arXiv2021

QUESTDB: a database of highly-accurate excitation energies for the electronic structure community

We describe our efforts of the past few years to create a large set of more than 500 highly-accurate vertical excitation energies of various natures ($π\to π^*$, $n \to π^*$, double excitation, Rydberg, singlet, doublet, triplet, etc) in small- and medium-sized molecules. These values have been obtained using an incremental strategy which consists in combining high-order coupled cluster and selected configuration interaction calculations using increasingly large diffuse basis sets in order to reach high accuracy. One of the key aspect of the so-called QUEST database of vertical excitations is that it does not rely on any experimental values, avoiding potential biases inherently linked to experiments and facilitating theoretical cross comparisons. Following this composite protocol, we have been able to produce theoretical best estimate (TBEs) with the aug-cc-pVTZ basis set for each of these transitions, as well as basis set corrected TBEs (i.e., near the complete basis set limit) for some of them. The TBEs/aug-cc-pVTZ have been employed to benchmark a large number of (lower-order) wave function methods such as CIS(D), ADC(2), CC2, STEOM-CCSD, CCSD, CCSDR(3), CCSDT-3, ADC(3), CC3, NEVPT2, and others (including spin-scaled variants). In order to gather the huge amount of data produced during the QUEST project, we have created a website [https://lcpq.github.io/QUESTDB_website] where one can easily test and compare the accuracy of a given method with respect to various variables such as the molecule size or its family, the nature of the excited states, the type of basis set, etc. We hope that the present review will provide a useful summary of our effort so far and foster new developments around excited-state methods.

physics.chem-ph↗

arXiv2020

A Mountaineering Strategy to Excited States: Highly-Accurate Oscillator Strengths and Dipole Moments of Small Molecules

This work presents a series of highly-accurate excited-state properties obtained using high-order coupled-cluster (CC) calculations performed with a series of diffuse containing basis sets, as well as extensive comparisons with experimental values. Indeed, we have computed both the main ground-to-excited transition property, the oscillator strength, as well as the ground- and excited-state dipole moments, considering {thirteen} small molecules (hydridoboron, hydrogen chloride, water, hydrogen sulfide, boron fluoride, carbon monoxide, dinitrogen, ethylene, formaldehyde, thioformaldehyde, nitroxyl, {fluorocarbene}, and silylidene). We systematically include corrections up to the quintuple (CCSDTQP) in the CC expansion and extrapolate to the complete basis set limit. When comparisons with experimental measurements are possible, that is, when a number of consistent experimental data can be found, theory typically provides values falling within the experimental error bar for the excited-state properties. Besides completing our previous studies focussed on transition energies (\textit{J.~Chem.~Theory Comput.} \textbf{14} (2018) 4360--4379, \textit{ibid.}~\textbf{15} (2019) 1939--1956, \textit{ibid.}~\textbf{16} (2020) 1711--1741, and \textit{ibid.}~\textbf{16} (2020) 3720--3736), this work also provides ultra-accurate dipoles and oscillator strengths that could be employed for future theoretical benchmarks.

physics.chem-ph↗

arXiv2020

Potential energy surfaces without unphysical discontinuities: the Coulomb-hole plus screened exchange approach

In this work we show the advantages of using the Coulomb-hole plus screened-exchange (COHSEX) approach in the calculation of potential energy surfaces. In particular, we demonstrate that, unlike perturbative $GW$ and partial self-consistent $GW$ approaches, such as eigenvalue-self-consistent $GW$ and quasi-particle self-consistent $GW$, the COHSEX approach yields smooth potential energy surfaces without irregularities and discontinuities. Moreover, we show that the ground-state potential energy surfaces (PES) obtained from the Bethe-Salpeter equation, within the adiabatic connection fluctuation dissipation theorem, built with quasi-particle energies obtained from perturbative COHSEX on top of Hartree-Fock (BSE@COHSEX@HF) yield very accurate results for diatomic molecules close to their equilibrium distance. When self-consistent COHSEX quasi-particle energies and orbitals are used to build the BSE equation the results become independent of the starting point. We show that self-consistency worsens the total energies but improves the equilibrium distances with respect to BSE@COHSEX@HF. This is mainly due to changes in the screening inside the BSE.

physics.chem-ph↗

arXiv2020

Towards a Systematic Improvement of the Fixed-Node Approximation in Diffusion Monte Carlo for Solids -- A Case Study In Diamond

While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and systematically improved. Here, we present a computational method that produces trial wavefunctions with systematically improvable nodes for DMC calculations of periodic solids. These trial wavefunctions are efficiently generated with the configuration interaction using a perturbative selection made iteratively (CIPSI) method. A simple protocol in which both exact and approximate results for finite supercells are used to extrapolate to the thermodynamic limit is introduced.

physics.chem-ph↗

arXiv2020

The performance of CIPSI on the ground state electronic energy of benzene

Following the recent work of Eriksen et al. [arXiv:2008.02678], we report the performance of the \textit{Configuration Interaction using a Perturbative Selection made Iteratively} (CIPSI) method on the non-relativistic frozen-core correlation energy of the benzene molecule in the cc-pVDZ basis. Following our usual protocol, we obtain a correlation energy of $-863.4$ m$E_h$ which agrees with the theoretical estimate of $-863$ m$E_h$ proposed by Eriksen et al. using an extensive array of highly-accurate new electronic structure methods.

physics.chem-ph↗

arXiv2020

Dynamical Kernels for Optical Excitations

We discuss the physical properties and accuracy of three distinct dynamical (ie, frequency-dependent) kernels for the computation of optical excitations within linear response theory: i) an a priori built kernel inspired by the dressed time-dependent density-functional theory (TDDFT) kernel proposed by Maitra and coworkers, ii) the dynamical kernel stemming from the Bethe-Salpeter equation (BSE) formalism derived originally by Strinati , and iii) the second-order BSE kernel derived by Yang and coworkers . The principal take-home message of the present paper is that dynamical kernels can provide, thanks to their frequency-dependent nature, additional excitations that can be associated to higher-order excitations (such as the infamous double excitations), an unappreciated feature of dynamical quantities. We also analyze, for each kernel, the appearance of spurious excitations originating from the approximate nature of the kernels, as first evidenced by Romaniello. Using a simple two-level model, prototypical examples of valence, charge-transfer, and Rydberg excited states are considered.

physics.chem-ph↗