Searcharxiv⌕ Search

arXiv subjects

Pietro Bernasconi

Publications and source records attributed to Pietro Bernasconi.

24 records · Page 2Linked to original sources

Quantifying the effect of passband on observations in the Ca II K line

Full-disk observations of the Sun in the Ca II K line have been carried out since the late 19th century at various observatories worldwide. These long-term records of solar activity are crucial for reducing discrepancies among solar irradiance reconstructions and for advancing our understanding of the solar dynamo. To construct a consistent composite record, data from different observatories must be cross-calibrated to account for variations in spectral passband and spatial resolution, which are the primary sources of discrepancies between archives. In this study, we use high spectral and spatial resolution observations in the Ca II K line from the state-of-the-art Sunrise III mission to emulate different passbands and derive empirical contrast-contrast relationships between them. We find that these relationships are well described by a power law and provide coefficients for different combinations of passband widths in the range 0.1--9 Angstroms and spatial resolutions between 1 arcsec and 6 arcsec. Applying such a relationship to observations from two major Ca II K archives demonstrates its potential to improve their cross-calibration. The results provide a foundation for the construction of a consistent, century-long time series of solar activity from historical and modern Ca II K observations.

astro-ph.SR↗

Sunrise III: The Wavefront Correction System

This paper describes the wave-front correction and image stabilisation system (CWS) developed for the Sunrise III balloon-borne telescope, and provides information about its performance as measured during the integration into the telescope and during the 2024 science flight. The fast image stabilisation is done by a correlation tracker (CT) and a fast tip-tilt mirror, low order aberrations such as defocus and coma are measured by a six-element Shack-Hartmann wavefront sensor (WFS) and corrected by an active telescope secondary mirror for automated focus and manual coma correction. The CWS is specified to deliver a stabilised image with a precision of 0.005 arcsec (rms). The autofocus adjustment is specified to maintain a focus stability of 0.01 waves in the focal plane of the CWS.

astro-ph.IM↗

Sunrise III: Overview of Observatory and Instruments

In July 2024, Sunrise completed its third successful science flight. The Sunrise III observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly explored spectral regions and lines are exploited to paint a three-dimensional picture of the solar atmosphere with unprecedented completeness and level of detail. The full polarimetric information is captured by all three instruments to reveal the interaction between the magnetic fields and the hydrodynamic processes. Two slit-based spectropolarimeters, the Sunrise UV Spectropolarimeter and Imager (SUSI) and the Sunrise Chromospheric Infrared spectro-Polarimeter (SCIP), focus on the near-ultraviolet and the near-infrared regions respectively, and the imaging spectropolarimeter Tunable Magnetograph (TuMag) simultaneously obtains maps of the full field-of-view of $46 \times 46$ Mm$^2$ in the photosphere and the chromosphere in the visible. The instruments are operated in an orchestrated mode, benefiting from a new Image Stabilization and Light Distribution unit (ISLiD), with the Correlating Wavefront Sensor (CWS) providing the autofocus control and an image stability with a root-mean-square value smaller than 0.005''. A new gondola was constructed to significantly improve the telescope pointing stability, required to achieve uninterrupted observations over many hours. Sunrise III was launched successfully on July 10, 2024, from the Esrange Space Center near Kiruna (Sweden). It reached the landing site between the Mackenzie River and the Great Bear Lake in Canada after a flight duration of 6.5 days. In this paper, we give an overview of the Sunrise III observatory and its instruments.

astro-ph.IM↗

TuMag: the tunable magnetograph for the Sunrise III mission

One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and dynamic coupling in these layers. The key technologies employed for TuMag are an LCVR-based polarimeter and a solid, LiNbO3 Fabry-Pérot etalon as a spectrometer. However, it also incorporates several innovative features, such as home-made high-sensitivity scientific cameras and a double filter wheel. TuMag can sequentially observe any two out of the three spectral lines of Fe I at 525.02 and 525.06 nm and of Mg I at 517.3 nm. Laboratory measurements have demonstrated outstanding performance, including a wavefront root-mean-square error better than λ/13 for image quality, a full-width-at-half-maximum of 8.7 pm for the filtergraph transmission profile, and polarimetric efficiencies > 0.54. Here we report on the concept, design, calibration, and integration phases of the instrument, as well as on the data reduction pipeline.

astro-ph.IM↗

High Precision Microscale 3D Manufacturing of Ultra Low Expansion Glass by Femtosecond Selective Laser Etching

Due to its exceptional dimensional stability in harsh thermal conditions and excellent mechanical and optical properties, Corning ultra-low expansion (ULE) glass is the material of choice in many high-demanding fields such as aerospace, astronomy, and advanced optics. This material has recently attracted renewed attention with the advent of femtosecond laser technology, with a particular focus on the interaction of ultrafast pulses and the material itself. Phenomena like the formation of self-assembled nanogratings and their thermal stability as well as the darkening of laser-affected zones have then been characterized. This paper presents how to exploit femtosecond selective laser etching (SLE) techniques to manufacture truly three-dimensional (3D) components. To demonstrate the micron-scale accuracy and repeatability of this process from the mm- to the cm-size range, various devices are designed and fabricated: fiber hole arrays with different hole densities, sizes, orientations, and shapes; and fiber V-groove arrays. Additionally, a mechanical flexural fiber mount is presented as an example of how multiple functionalities can be monolithically integrated into a single piece of glass through SLE technology. An example of a passive alignment substrate for optical components is also shown. SLE technique represents a new advancement in the field of microscale manufacturing, enabling the scalable production of custom-designed ULE glass structures with unprecedented precision and complexity, paving the way for the miniaturized integration of highly stable components.

physics.optics↗

A Roadmap For Scientific Ballooning 2020-2030

From 2018 to 2020, the Scientific Balloon Roadmap Program Analysis Group (Balloon Roadmap PAG) served as an community-based, interdisciplinary forum for soliciting and coordinating community analysis and input in support of the NASA Scientific Balloon Program. The Balloon Roadmap PAG was tasked with articulating and prioritizing the key science drivers and needed capabilities of the Balloon Program for the next decade. Additionally, the Balloon Roadmap PAG was asked to evaluate the potential for achieving science goals and maturing technologies of the Science Mission Directorate, evaluate the Balloon Program goals towards community outreach, and asses commercial balloon launch opportunities. The culmination of this work has been a written report submitted to the NASA Astrophysics Division Director.

astro-ph.IM↗