arXiv subjects

Pietro Carrara

Publications and source records attributed to Pietro Carrara.

At least 19 recordsLinked to original sources

arXiv2026

On phase-field regularization in dynamic fracture with brittle and cohesive formulations

Phase-field models of fracture are widely used for simulating crack nucleation and propagation, yet the role of the phase-field regularization in the dynamic regime is not fully understood and depends critically on how the damage variable is coupled to the displacement field. In this paper, we analyze three alternative formulations: the brittle model with stiffness degradation, its variant with stiffness+density degradation, and our recently proposed phase-field regularization of cohesive fracture, which we extend to elastodynamics. By studying the interaction of a tensile and a compressive elastic wave with a phase-field crack in a one-dimensional bar, we determine for which models and under which conditions the phase-field regularization preserves the features of the wave-crack interaction expected for a sharp crack, and we theoretically explain which variables control the behavior. For the new cohesive model extended to dynamics, we further derive an analytical dynamic cohesive opening law. Finally, we study the dynamic behavior including branching of a two-dimensional notched plate at two loading intensities.

cs.CE↗

arXiv2026

Iterative convergence in phase-field brittle fracture computations: exact line search is all you need

Variational phase-field models of brittle fracture pose a local constrained minimization problem of a non-convex energy functional. In the discrete setting, the problem is most often solved by alternate minimization, exploiting the separate convexity of the energy with respect to the two unknowns. This approach is theoretically guaranteed to converge, provided each of the individual subproblems is solved successfully. However, strong non-linearities of the energy functional may lead to failure of iterative convergence within one or both subproblems. We analyze and visualize the energy along Newton directions to illustrate why Newton's method without line search fails. Motivated by this, we propose to employ an exact line search algorithm based on bisection, which (under certain conditions) can guarantee global convergence of Newton's method for each subproblem and consequently the successful determination of critical points of the energy through the alternate minimization scheme. Through several benchmark tests computed with various strain energy decompositions and two strategies for the enforcement of the irreversibility constraint in two and three dimensions, we demonstrate the robustness of the approach and assess its efficiency in comparison with other commonly used line search algorithms. With the outlined approach, we are able to compute the especially demanding Brazilian test featuring contact in 3D with the star-convex model.

cs.CE↗

arXiv2026

Discovery of Hyperelastic Constitutive Laws from Experimental Data with EUCLID

We assess the performance of EUCLID, Efficient Unsupervised Constitutive Law Identification and Discovery, a recently proposed framework for automated discovery of constitutive laws, on experimental data. Mechanical tests are performed on natural rubber specimens spanning simple to complex geometries, from which we collect both global, force elongation, and local, full-field displacement, measurements. Using these data, we obtain constitutive laws via two routes, the conventional identification of unknown parameters in a priori selected material models, and EUCLID, which automates model selection and parameter identification within a unified model-discovery pipeline. We compare the two methodologies using global versus local data, analyze predictive accuracy, and examine generalization to unseen geometries. Moreover, we quantify the experimental noise, investigate the coverage of the material state space achieved by each approach and discuss the relative performance of different datasets and different a priori chosen models versus EUCLID.

physics.comp-ph↗

arXiv2026

Spin waves excited by hard x-ray transient gratings

Recent progress in ultrafast x-ray sources helped establish x-rays as an important tool for probing lattice and magnetic dynamics initiated by femtosecond optical pulses. Here, we explore the potential of ultrashort hard x-ray pulses for driving magnetic dynamics. We use a transient grating technique in which a spatially periodic x-ray excitation pattern gives rise to material excitations at a well-defined wave vector, whose dynamics are monitored via diffraction of an optical probe pulse. The excitation of a ferrimagnetic gadolinium bismuth iron garnet film placed in an external tilted magnetic field by x-rays at the Gd L3 edge results in both magnetic and non-magnetic transient gratings whose contributions to the diffracted signal are separated by polarization analysis. We observe the magnetization precession at both longitudinal acoustic and spin wave frequencies. An analysis with the Landau-Lifshitz-Gilbert equation indicates that the magnetization precession is driven by strain resulting from thermal expansion induced by absorbed x-rays. The results establish x-ray transient gratings as a tool for driving coherent phonons and magnons, with the potential of accessing wave vectors across the entire Brillouin zone.

physics.optics↗

arXiv2025

Soft x-rays with Orbital Angular Momentum for resonant scattering experiments at the SOLEIL synchrotron

The paper presents a comprehensive description of a new setup implemented and commissioned at the SEXTANTS beamline of the SOLEIL synchrotron for absorption and scattering experiments with x-ray beams carrying an orbital angular momentum, also known as twisted x-ray beams. Two alternative methods have been implemented, based on the use of either spiral zone plates or fork gratings devices, and we show how they can be used for both defining and assessing the orbital angular momentum of an x-ray beam. We show also how multiple devices can be used in sequence to define an integer arithmetic of the orbital angular momentum of the final x-ray beam. Finally, we report the results of the first resonant scattering pilot experiments in transmission and reflection mode, intended to assess the feasibility of future users measurements. The availability of twisted soft x-rays complements the range of experimental techniques in elastic, resonant and coherent scattering available at the SEXTANTS beamline of the SOLEIL synchrotron.

cond-mat.mtrl-sci↗

arXiv2025

Variational phase-field modeling of cohesive fracture with flexibly tunable strength surface

Variational phase-field models of brittle fracture are powerful tools for studying Griffith-type crack propagation in complex scenarios. However, as approximations of Griffith's theory-which does not incorporate a strength criterion-these models lack flexibility in prescribing material-specific strength surfaces. Consequently, they struggle to accurately capture crack nucleation under multiaxial stress conditions. In this paper, inspired by Alessi et al. (2014), we propose a variational phase-field model that approximates cohesive fracture. The model accommodates an arbitrary (convex) strength surface, independent of the regularization length scale, and allows for flexible tuning of the cohesive response. Our formulation results in sharp cohesive cracks and naturally enforces a sharp non-interpenetration condition, thereby eliminating the need for additional energy decomposition strategies. It inherently satisfies stress softening and produces "crack-like" residual stresses by construction. To ensure strain hardening, the ratio of the regularization length to the material's cohesive length must be sufficiently small; however, if crack nucleation is desired, this ratio must also be large enough to make the homogeneous damaged state unstable. We investigate the model in one and three dimensions, establishing first- and second-order stability results. The theoretical findings are validated through numerical simulations using the finite element method, employing standard discretization and solution techniques.

physics.app-ph↗

arXiv2025

Optical spin-orbit interaction induced by magnetic textures

Contrary to the optical spin angular momentum (SAM), the role played by the orbital angular momentum (OAM) of light in magneto-optics remains largely unexplored. However, the SAM and OAM are known to be coupled when light interacts with non-homogeneous and non-isotropic materials. Here we predict that the OAM carried by each photon in a light beam is modified upon reflection on magnetic textures like skyrmions, and that the sign of this variation is governed by the SAM of the incident field. Our predictions can be readily tested by performing circular dichroism measurements, and may provide new routes to shape light's angular momentum with magnetism.

physics.optics↗

arXiv2025

Phase-field modeling of elastic microphase separation

We propose a novel phase-field model to predict elastic microphase separation in polymer gels. To this end, we extend the Cahn-Hilliard free-energy functional to incorporate an elastic strain energy and a coupling term. These contributions are naturally obtained from a derivation that starts from an entropic elastic energy density combined with the assumption of weak compressibility, upon second-order approximation around the swollen state. The resulting terms correspond to those of a poroelastic formulation where the coupling energetic term can be interpreted as the osmotic work of the solvent within the polymer matrix. Additionally, a convolution term is included in the total energy to model non-local forces responsible for coarsening arrest. With analytical derivations in 1D and finite element computations in 2D we show that the mechanical deformation controls the composition of the stable phases, the initial characteristic length and time, the coarsening rates and the arrested characteristic length. Moreover, we demonstrate that the proposed coupling is able to predict the arrest of coarsening at a length scale controlled by the stiffness of the dry polymer. The numerical results show excellent agreement with the experimental evidence in terms of phase-separated morphology and scaling of the characteristic length with the stiffness of the dry polymer.

cond-mat.mtrl-sci↗

arXiv2025

Fracture in concrete: X-ray tomography with in-situ testing, digital volume correlation and phase-field modeling

We test and simulate the mesoscopic cracking behavior of specimens made of a standard concrete mixture. To this end, we combine stable wedge-splitting fracture experiments performed during X-ray tomography, their analysis with digital volume correlation providing the full three-dimensional displacement field, and phase-field cohesive fracture modeling. In our computations, we apply the measured boundary conditions and model the actual heterogeneous material structure at the mesoscopic scale. Within the phase-field model, we explicitly distinguish among (thus individually represent) the mesostructural features of distinct material phases with size above a threshold of 1 mm, while we homogenize pores and finer aggregates below this threshold within the cementitious mortar matrix, with material parameters characterized accordingly. We compare experimental and numerical results in terms of both local and global quantities.

cond-mat.mes-hall↗

arXiv2024

An adaptive acceleration scheme for phase-field fatigue computations

Phase-field models of fatigue are capable of reproducing the main phenomenology of fatigue behavior. However, phase-field computations in the high-cycle fatigue regime are prohibitively expensive, due to the need to resolve spatially the small length scale inherent to phase-field models and temporally the loading history for several millions of cycles. As a remedy, we propose a fully adaptive acceleration scheme based on the cycle jump technique, where the cycle-by-cycle resolution of an appropriately determined number of cycles is skipped while predicting the local system evolution during the jump. The novelty of our approach is a cycle-jump criterion to determine the appropriate cycle-jump size based on a target increment of a global variable which monitors the advancement of fatigue. We propose the definition and meaning of this variable for three general stages of the fatigue life. In comparison to existing acceleration techniques, our approach needs no parameters and bounds for the cycle-jump size, and it works independently of the material, specimen or loading conditions. Since one of the monitoring variables is the fatigue crack length, we introduce an accurate, flexible and efficient method for its computation, which overcomes the issues of conventional crack tip tracking algorithms and enables the consideration of several cracks evolving at the same time. The performance of the proposed acceleration scheme is demonstrated with representative numerical examples, which show a speedup reaching four orders of magnitude in the high-cycle fatigue regime with consistently high accuracy.

cs.CE↗

arXiv2024

Calibration and Validation of a Phase-Field Model of Brittle Fracture within the Damage Mechanics Challenge

In the context of the Damage Mechanics Challenge, we adopt a phase-field model of brittle fracture to blindly predict the behavior up to failure of a notched three-point-bending specimen loaded under mixed-mode conditions. The beam is additively manufactured using a geo-architected gypsum based on the combination of bassanite and a water-based binder. The calibration of the material parameters involved in the model is based on a set of available independent experimental tests and on a two-stage procedure. In the first stage an estimate of most of the elastic parameters is obtained, whereas the remaining parameters are optimized in the second stage so as to minimize the discrepancy between the numerical predictions and a set of experimental results on notched three-point-bending beams. The good agreement between numerical predictions and experimental results in terms of load-displacement curves and crack paths demonstrates the predictive ability of the model and the reliability of the calibration procedure.

cs.CE↗

arXiv2024

A review on data-driven constitutive laws for solids

This review article highlights state-of-the-art data-driven techniques to discover, encode, surrogate, or emulate constitutive laws that describe the path-independent and path-dependent response of solids. Our objective is to provide an organized taxonomy to a large spectrum of methodologies developed in the past decades and to discuss the benefits and drawbacks of the various techniques for interpreting and forecasting mechanics behavior across different scales. Distinguishing between machine-learning-based and model-free methods, we further categorize approaches based on their interpretability and on their learning process/type of required data, while discussing the key problems of generalization and trustworthiness. We attempt to provide a road map of how these can be reconciled in a data-availability-aware context. We also touch upon relevant aspects such as data sampling techniques, design of experiments, verification, and validation.

cs.CE↗

arXiv2023

Observation of termination-dependent topological connectivity in a magnetic Weyl kagome-lattice

Engineering surfaces and interfaces of materials promises great potential in the field of heterostructures and quantum matter designer, with the opportunity of driving new many-body phases that are absent in the bulk compounds. Here, we focus on the magnetic Weyl kagome system Co$_3$Sn$_2$S$_2$ and show how for different sample's terminations the Weyl-points connect also differently, still preserving the bulk-boundary correspondence. Scanning-tunnelling microscopy has suggested such a scenario indirectly. Here, we demonstrate this directly for the fermiology of Co$_3$Sn$_2$S$_2$, by linking it to the system real space surfaces distribution. By a combination of micro-ARPES and first-principles calculations, we measure the energy-momentum spectra and the Fermi surfaces of Co$_3$Sn$_2$S$_2$ for different surface terminations and show the existence of topological features directly depending on the top-layer electronic environment. Our work helps to define a route to control bulk-derived topological properties by means of surface electrostatic potentials, creating a realistic and reliable methodology to use Weyl kagome metals in responsive magnetic spintronics.

cond-mat.str-el↗

arXiv2023

Flat band separation and robust spin-Berry curvature in bilayer kagome metals

Kagome materials have emerged as a setting for emergent electronic phenomena that encompass different aspects of symmetry and topology. It is debated whether the XV$_6$Sn$_6$ kagome family (where X is a rare earth element), a recently discovered family of bilayer kagome metals, hosts a topologically non-trivial ground state resulting from the opening of spin-orbit coupling gaps. These states would carry a finite spin-Berry curvature, and topological surface states. Here, we investigate the spin and electronic structure of the XV$_6$Sn$_6$ kagome family. We obtain evidence for a finite spin-Berry curvature contribution at the center of the Brillouin zone, where the nearly flat band detaches from the dispersing Dirac band because of spin-orbit coupling. In addition, the spin-Berry curvature is further investigated in the charge density wave regime of ScV$_6$Sn$_6$, and it is found to be robust against the onset of the temperature-driven ordered phase. Utilizing the sensitivity of angle resolved photoemission spectroscopy to the spin and orbital angular momentum, our work unveils the spin-Berry curvature of topological kagome metals, and helps to define its spectroscopic fingerprint.

cond-mat.str-el↗

arXiv2023

Elastic Microphase Separation Produces Robust Bicontinuous Materials

Bicontinuous microstructures are essential to the function of diverse natural and synthetic systems. Their synthesis has been based on two approaches: arrested phase separation or self-assembly of block copolymers. The former is attractive for its chemical simplicity, the latter for its thermodynamic robustness. Here, we introduce Elastic MicroPhase Separation (EMPS) as an alternative approach to make bicontinuous microstructures. Conceptually, EMPS balances the molecular-scale forces that drive demixing with large-scale elasticity to encode a thermodynamic length scale. This process features a continuous phase transition, reversible without hysteresis. Practically, we trigger EMPS by simply super-saturating an elastomeric matrix with a liquid. This results in uniform bicontinuous materials with a well-defined microscopic length-scale tuned by the matrix stiffness. The versatility and robustness of EMPS is further demonstrated by fabricating bicontinuous materials with superior mechanical properties and controlled anisotropy and microstructural gradients.

cond-mat.soft↗

arXiv2023

Dynamics and Resilience of the Charge Density Wave in a bilayer kagome metal

Long-range electronic order descending from a metallic parent state constitutes a rich playground to study the intricate interplay of structural and electronic degrees of freedom. With dispersive and correlation features as multifold as topological Dirac-like itinerant states, van-Hove singularities, correlated flat bands, and magnetic transitions at low temperature, kagome metals are located in the most interesting regime where both phonon and electronically mediated couplings are significant. Several of these systems undergo a charge density wave (CDW) transition, and the van-Hove singularities, which are intrinsic to the kagome tiling, have been conjectured to play a key role in mediating such an instability. However, to date, the origin and the main driving force behind this charge order is elusive. Here, we use the topological bilayer kagome metal ScV6Sn6 as a platform to investigate this puzzling problem, since it features both kagome-derived nested Fermi surface and van-Hove singularities near the Fermi level, and a CDW phase that affects the susceptibility, the neutron scattering, and the specific heat, similarly to the siblings AV3Sb5 (A = K, Rb, Cs) and FeGe. We report on our findings from high-resolution angle-resolved photoemission, density functional theory, and time-resolved optical spectroscopy to unveil the dynamics of its CDW phase. We identify the structural degrees of freedom to play a fundamental role in the stabilization of charge order. Along with a comprehensive analysis of the subdominant impact from electronic correlations, we find ScV6Sn6 to feature an instance of charge density wave order that predominantly originates from phonons. As we shed light on the emergent phonon profile in the low-temperature ordered regime, our findings pave the way for a deeper understanding of ordering phenomena in all CDW kagome metals.

cond-mat.str-el↗

arXiv2022

Phase-field modeling of brittle fracture in heterogeneous bars

We investigate phase-field modeling of brittle fracture in a one-dimensional bar featuring a continuous variation of elastic and/or fracture properties along its axis. Our main goal is to quantitatively assess how the heterogeneity in elastic and fracture material properties influences the observed behavior of the bar, as obtained from the phase-field modeling approach. The results clarify how the elastic limit stress, the peak stress and the fracture toughness of the heterogeneous bar relate to those of the reference homogeneous bar, and what are the parameters affecting these relationships. Overall, the effect of heterogeneity is shown to be strictly tied to the non-local nature of the phase-field regularization. Finally, we show that this non-locality may amend the ill-posedness of the sharp-crack problem in heterogeneous bars where multiple points compete as fracture locations.

physics.app-ph↗

arXiv2021

Quantitative Ultrafast Electron-Temperature Dynamics in Photo-Excited Au Nanoparticles

The femtosecond evolution of the electronic temperature of laser-excited gold nanoparticles is measured, by means of ultrafast time-resolved photoemission spectroscopy induced by extreme-ultraviolet radiation pulses. The temperature of the electron gas is deduced by recording and fitting high-resolution photo emission spectra around the Fermi edge of gold nanoparticles providing a direct, unambiguous picture of the ultrafast electron-gas dynamics. These results will be instrumental to the refinement of existing models of femtosecond processes in laterally-confined and bulk condensed-matter systems, and for understanding more deeply the role of hot electrons in technological applications.

cond-mat.mtrl-sci↗