arXiv subjects

Pietro Liguori

Publications and source records attributed to Pietro Liguori.

30 records · Page 2Linked to original sources

arXiv2023

Run-time Failure Detection via Non-intrusive Event Analysis in a Large-Scale Cloud Computing Platform

Cloud computing systems fail in complex and unforeseen ways due to unexpected combinations of events and interactions among hardware and software components. These failures are especially problematic when they are silent, i.e., not accompanied by any explicit failure notification, hindering the timely detection and recovery. In this work, we propose an approach to run-time failure detection tailored for monitoring multi-tenant and concurrent cloud computing systems. The approach uses a non-intrusive form of event tracing, without manual changes to the system's internals to propagate session identifiers (IDs), and builds a set of lightweight monitoring rules from fault-free executions. We evaluated the effectiveness of the approach in detecting failures in the context of the OpenStack cloud computing platform, a complex and "off-the-shelf" distributed system, by executing a campaign of fault injection experiments in a multi-tenant scenario. Our experiments show that the approach detects the failure with an F1 score (0.85) and accuracy (0.77) higher than the ones provided by the OpenStack failure logging mechanisms (0.53 and 0.50) and two non--session-aware run-time verification approaches (both lower than 0.15). Moreover, the approach significantly decreases the average time to detect failures at run-time (~114 seconds) compared to the OpenStack logging mechanisms.

cs.SE↗

arXiv2022

Can NMT Understand Me? Towards Perturbation-based Evaluation of NMT Models for Code Generation

Neural Machine Translation (NMT) has reached a level of maturity to be recognized as the premier method for the translation between different languages and aroused interest in different research areas, including software engineering. A key step to validate the robustness of the NMT models consists in evaluating the performance of the models on adversarial inputs, i.e., inputs obtained from the original ones by adding small amounts of perturbation. However, when dealing with the specific task of the code generation (i.e., the generation of code starting from a description in natural language), it has not yet been defined an approach to validate the robustness of the NMT models. In this work, we address the problem by identifying a set of perturbations and metrics tailored for the robustness assessment of such models. We present a preliminary experimental evaluation, showing what type of perturbations affect the model the most and deriving useful insights for future directions.

cs.CL↗

arXiv2022

Shellcode_IA32: A Dataset for Automatic Shellcode Generation

We take the first step to address the task of automatically generating shellcodes, i.e., small pieces of code used as a payload in the exploitation of a software vulnerability, starting from natural language comments. We assemble and release a novel dataset (Shellcode_IA32), consisting of challenging but common assembly instructions with their natural language descriptions. We experiment with standard methods in neural machine translation (NMT) to establish baseline performance levels on this task.

cs.SE↗

arXiv2022

Can We Generate Shellcodes via Natural Language? An Empirical Study

Writing software exploits is an important practice for offensive security analysts to investigate and prevent attacks. In particular, shellcodes are especially time-consuming and a technical challenge, as they are written in assembly language. In this work, we address the task of automatically generating shellcodes, starting purely from descriptions in natural language, by proposing an approach based on Neural Machine Translation (NMT). We then present an empirical study using a novel dataset (Shellcode_IA32), which consists of 3,200 assembly code snippets of real Linux/x86 shellcodes from public databases, annotated using natural language. Moreover, we propose novel metrics to evaluate the accuracy of NMT at generating shellcodes. The empirical analysis shows that NMT can generate assembly code snippets from the natural language with high accuracy and that in many cases can generate entire shellcodes with no errors.

cs.SE↗

arXiv2021

EVIL: Exploiting Software via Natural Language

Writing exploits for security assessment is a challenging task. The writer needs to master programming and obfuscation techniques to develop a successful exploit. To make the task easier, we propose an approach (EVIL) to automatically generate exploits in assembly/Python language from descriptions in natural language. The approach leverages Neural Machine Translation (NMT) techniques and a dataset that we developed for this work. We present an extensive experimental study to evaluate the feasibility of EVIL, using both automatic and manual analysis, and both at generating individual statements and entire exploits. The generated code achieved high accuracy in terms of syntactic and semantic correctness.

cs.SE↗

arXiv2021

Enhancing the Analysis of Software Failures in Cloud Computing Systems with Deep Learning

Identifying the failure modes of cloud computing systems is a difficult and time-consuming task, due to the growing complexity of such systems, and the large volume and noisiness of failure data. This paper presents a novel approach for analyzing failure data from cloud systems, in order to relieve human analysts from manually fine-tuning the data for feature engineering. The approach leverages Deep Embedded Clustering (DEC), a family of unsupervised clustering algorithms based on deep learning, which uses an autoencoder to optimize data dimensionality and inter-cluster variance. We applied the approach in the context of the OpenStack cloud computing platform, both on the raw failure data and in combination with an anomaly detection pre-processing algorithm. The results show that the performance of the proposed approach, in terms of purity of clusters, is comparable to, or in some cases even better than manually fine-tuned clustering, thus avoiding the need for deep domain knowledge and reducing the effort to perform the analysis. In all cases, the proposed approach provides better performance than unsupervised clustering when no feature engineering is applied to the data. Moreover, the distribution of failure modes from the proposed approach is closer to the actual frequency of the failure modes.

cs.AI↗

arXiv2021

Design, Integration and Sea Trials of 3D Printed Unmanned Aerial Vehicle and Unmanned Surface Vehicle for Cooperative Missions

In recent years, Unmanned Surface Vehicles (USV) have been extensively deployed for maritime applications. However, USV has a limited detection range with sensor installed at the same elevation with the targets. In this research, we propose a cooperative Unmanned Aerial Vehicle - Unmanned Surface Vehicle (UAV-USV) platform to improve the detection range of USV. A floatable and waterproof UAV is designed and 3D printed, which allows it to land on the sea. A catamaran USV and landing platform are also developed. To land UAV on the USV precisely in various lighting conditions, IR beacon detector and IR beacon are implemented on the UAV and USV, respectively. Finally, a two-phase UAV precise landing method, USV control algorithm and USV path following algorithm are proposed and tested.

cs.RO↗

arXiv2020

Towards Runtime Verification via Event Stream Processing in Cloud Computing Infrastructures

Software bugs in cloud management systems often cause erratic behavior, hindering detection, and recovery of failures. As a consequence, the failures are not timely detected and notified, and can silently propagate through the system. To face these issues, we propose a lightweight approach to runtime verification, for monitoring and failure detection of cloud computing systems. We performed a preliminary evaluation of the proposed approach in the OpenStack cloud management platform, an "off-the-shelf" distributed system, showing that the approach can be applied with high failure detection coverage.

cs.SE↗

arXiv2020

Fault Injection Analytics: A Novel Approach to Discover Failure Modes in Cloud-Computing Systems

Cloud computing systems fail in complex and unexpected ways due to unexpected combinations of events and interactions between hardware and software components. Fault injection is an effective means to bring out these failures in a controlled environment. However, fault injection experiments produce massive amounts of data, and manually analyzing these data is inefficient and error-prone, as the analyst can miss severe failure modes that are yet unknown. This paper introduces a new paradigm (fault injection analytics) that applies unsupervised machine learning on execution traces of the injected system, to ease the discovery and interpretation of failure modes. We evaluated the proposed approach in the context of fault injection experiments on the OpenStack cloud computing platform, where we show that the approach can accurately identify failure modes with a low computational cost.

cs.SE↗

arXiv2020

ProFIPy: Programmable Software Fault Injection as-a-Service

In this paper, we present a new fault injection tool (ProFIPy) for Python software. The tool is designed to be programmable, in order to enable users to specify their software fault model, using a domain-specific language (DSL) for fault injection. Moreover, to achieve better usability, ProFIPy is provided as software-as-a-service and supports the user through the configuration of the faultload and workload, failure data analysis, and full automation of the experiments using container-based virtualization and parallelization.

cs.SE↗

arXiv2019

Enhancing Failure Propagation Analysis in Cloud Computing Systems

In order to plan for failure recovery, the designers of cloud systems need to understand how their system can potentially fail. Unfortunately, analyzing the failure behavior of such systems can be very difficult and time-consuming, due to the large volume of events, non-determinism, and reuse of third-party components. To address these issues, we propose a novel approach that joins fault injection with anomaly detection to identify the symptoms of failures. We evaluated the proposed approach in the context of the OpenStack cloud computing platform. We show that our model can significantly improve the accuracy of failure analysis in terms of false positives and negatives, with a low computational cost.

cs.SE↗

arXiv2019

How Bad Can a Bug Get? An Empirical Analysis of Software Failures in the OpenStack Cloud Computing Platform

Cloud management systems provide abstractions and APIs for programmatically configuring cloud infrastructures. Unfortunately, residual software bugs in these systems can potentially lead to high-severity failures, such as prolonged outages and data losses. In this paper, we investigate the impact of failures in the context widespread OpenStack cloud management system, by performing fault injection and by analyzing the impact of the resulting failures in terms of fail-stop behavior, failure detection through logging, and failure propagation across components. The analysis points out that most of the failures are not timely detected and notified; moreover, many of these failures can silently propagate over time and through components of the cloud management system, which call for more thorough run-time checks and fault containment.

cs.SE↗