SearcharxivSearch

arXiv subjects

Pietro Marabotti

Publications and source records attributed to Pietro Marabotti.

11 recordsLinked to original sources

Direct Realization of Near-Ideal Carbyne in Ultrathin Boron Nitride Nanotubes

Carbyne, the sp-hybridized one-dimensional allotrope of carbon, is predicted to be the stiffest known material, with electronic and optical properties set by a single structural parameter, the bond length alternation. However, its intrinsic properties have never been measured: chains synthesized through molecular chemistry carry endgroup and finite-length perturbations that persist even in the longest molecules available, while chains grown inside carbon nanotubes strongly couple to the host, which renormalizes their vibrational frequency by up to 110 cm$^{-1}$ in a diameter-dependent manner. Here, we show that encapsulating and thermally converting hydrogen-capped polyynes inside ultrathin boron nitride nanotubes, structural analogues of carbon nanotubes but electrically insulating, yields carbyne chains in a near-ideal regime, where endgroup, finite length, and host-guest perturbations are reduced to secondary effects. Statistical Raman spectroscopy across 245 locations returns a vibrational frequency distribution an order of magnitude narrower than in carbon nanotubes, an anharmonicity consistent with the universal law for carbyne-like materials, and a bond length alternation matching correlated calculations for the free chain. No photoluminescence is detected, despite the transparent host, as expected for the dipole-forbidden emission of an unperturbed carbyne chain. Boron nitride nanotubes give experimental access to carbyne in its near-ideal form.

cond-mat.mes-hall

Halogen-Terminated Carbon Atomic Wires by Laser Ablation in Halogenated Organic Solvents: Synthesis and Characterization

We report the synthesis of halogenated carbon atomic wires (halopolyynes) via pulsed laser ablation in liquid and their comprehensive Raman characterization. Using dichloromethane and dibromomethane-containing solutions, we produced polydisperse mixtures of monohalogenated (HC$_{2n}$X) and dihalogenated (XC$_{2n}$X) polyynes (X=Cl, Br; n=3-10). High-performance liquid chromatography enabled separation and analysis of these compounds, while chemical derivatization and mass spectrometry confirmed their molecular structures. A possible formation mechanism is proposed, involving carbon chain polymerization and termination by hydrogen and halogen atoms from atomized solvent molecules during the plasma phase. UV-Vis absorption and synchrotron-based UV Resonance Raman spectroscopy reveal that halogen terminations act as auxochromes through p-$π$ conjugation between their lone-pair electrons and the sp-carbon backbone, extending effective conjugation length. This interaction reduces bond length alternation and moderately redshifts vibronic absorption and vibrational modes. Resonance Raman spectra show selective overtone enhancement and vibrational anharmonicity consistent with carbyne-like materials. These findings expand the synthetic approaches for halogenated carbon atomic wires and establish halopolyynes as a platform for tailoring electronic and optical properties of sp-carbon wires.

physics.chem-ph

Exploring the Growth Dynamics of Size-selected Carbon Atomic Wires with in situ UV Resonance Raman Spectroscopy

Short carbon atomic wires, the prototypes of the lacking carbon allotrope carbyne, represent the fundamental one-dimensional system and the first stage in carbon nanostructure growth, which still exhibits many open points regarding their growth and stability. We introduce an in situ UV resonance Raman approach for real-time monitoring of the growth of carbon atomic wires during pulsed laser ablation in liquid without perturbing the synthesis environment. We track single-chain species' growth dynamics, achieving size selectivity by exploiting the peculiar optoelectronic properties of carbon wires and the tunability of synchrotron radiation. We systematically explore diverse solvents, finding size- and solvent-dependent production rates linked to the solvent's C/H ratio and carbonization tendency. Carbon atomic wires' growth dynamics reveal a complex interplay between formation and degradation, leading to an equilibrium. Water, lacking in carbon atoms and reduced polyynes' solubility, yields fewer wires with rapid saturation. Organic solvents exhibit enhanced productivity and near-linear growth, attributed to additional carbon from solvent dissociation and low relative polarity. Exploring the dynamics of the saturation regime provides new insights into advancing carbon atomic wires' synthesis via PLAL. Understanding carbon atomic wires' growth dynamics can contribute to optimizing PLAL processes for nanomaterial synthesis.

physics.chem-ph

Universal Vibrational Anharmonicity in Carbyne-like Materials

Carbyne, an infinite linear chain of carbon atoms, is the truly one-dimensional allotrope of carbon. While ideal carbyne and its fundamental properties have remained elusive, carbyne-like materials like carbyne chains confined inside carbon nanotubes are available for study. Here, we probe the longitudinal optical phonon (C-mode) of confined carbyne chains by Raman spectroscopy up to the third overtone. We observe a strong vibrational anharmonicity that increases with decreasing C-mode frequency, reaching up to 8% for the third overtone. Moreover, we find that the relation between vibrational anharmonicity and C-mode frequency is universal to carbyne-like materials, including ideal carbyne. This establishes experimentally that carbyne and related materials have pronounced anharmonic potential landscapes which must be included in the theoretical description of their structure and properties.

cond-mat.mtrl-sci

Disclosing Early Excited State Relaxation Events in Prototypical Linear Carbon Chains

One-dimensional (1D) linear nanostructures comprising sp-hybridized carbon atoms, as derivatives of the prototypical allotrope known as carbyne, are predicted to possess outstanding mechanical, thermal, and electronic properties. Despite recent advances in the synthesis, their chemical and physical properties are still poorly understood. Here, we investigate the photophysics of a prototypical polyyne (i.e., 1D chain with alternating single and triple carbon bonds), as the simplest model of finite carbon wire and as a prototype of sp-carbon-based chains. We perform transient absorption experiments with high temporal resolution (<30 fs) on monodispersed hydrogen-capped hexayne H$-$(C$\equiv$C)$_6-$H synthesized by laser ablation in liquid. With the support of detailed computational studies based on ground state density functional theory (DFT) and excited state time-dependent (TD)-DFT calculations, we provide a comprehensive description of the excited state relaxation processes at early times following photoexcitation. We show that the internal conversion from a bright high-energy singlet excited state to a low-lying singlet dark state is ultrafast and takes place with a 200-fs time constant, followed by thermalization on the picosecond timescale and decay of the low-energy singlet state with hundreds of picoseconds time constant. We also show that the timescale of these processes does not depend on the end groups capping the sp-carbon chain. The understanding of the primary photo-induced events in polyynes is of key importance both for fundamental knowledge and for potential optoelectronic and light-harvesting applications of low dimensional nanostructured carbon-based materials.

cond-mat.mes-hall

A single liquid chromatography procedure to concentrate, separate and collect size-selected polyynes produced by pulsed laser ablation in water

Polyynes are linear carbon chains characterized by alternated single and triple bonds and terminated by hydrogen or other terminal substituents. They can be synthesized by pulsed laser ablation in liquid (PLAL) as a scalable, cost-effective, and fast physical technique. Water can be employed as a solvent for PLAL to avoid toxicity problems and to reduce costs compared to organic solvents. However, in this case, the production yield of polyynes reached is extremely low and prevents further characterization and implementation in new functional materials. In this work, we synthesized polyynes by pulsed laser ablation in water and we optimized the process parameters to improve the yield of polyynes by PLAL. Then, we developed a procedure entirely based on reversed-phase high-performance liquid chromatography (RP-HPLC) which effectively enables the concentration, separation and collection of polyynes according to their length. Since the polyynes sample is an aqueous solution, we could inject it directly into the RP-HPLC column without the dilution step required in the case of a sample in an organic solvent. Thanks to our single RP-HPLC procedure, it is possible to highly increase the concentration and separately characterize different size-selected polyynes for further use in functional materials.

physics.chem-ph

Pulsed laser ablation in liquid of sp-carbon chains: status and recent advances

This review provides a discussion of the current state of research on sp-carbon chains synthesized by pulsed laser ablation in liquid. In recent years, pulsed laser ablation in liquid (PLAL) has been widely employed for polyynes synthesis thanks to its flexibility with varying laser parameters, solvents, and targets. This allows the control of sp-carbon chains properties as yield, length, termination and stability. Although many reviews related to PLAL have been published, a comprehensive work reporting the current status and advances related to the synthesis of sp-carbon chains by PLAL is still missing. Here we first review the principle of PLAL and the mechanisms of formation of sp-carbon chains. Then we discuss the role of laser fluence (i.e. energy density), solvent, and target for sp-carbon chains synthesis. Lastly, we report the progress related to the prolonged stability of sp-carbon chains by PLAL encapsulated in polymeric matrices. This review will be a helpful guide for researchers interested in synthesizing sp-carbon chains by PLAL.

physics.chem-ph

In situ surface-enhanced Raman spectroscopy to investigate polyyne formation during pulsed laser ablation in liquid

The synthesis of polyynes during their formation by pulsed laser ablation in liquid (i.e. acetonitrile) has been analyzed by in-situ surface-enhanced Raman spectroscopy (SERS). A polyethylene pellet, functionalized with silver nanoparticles and placed into the ablation medium, served as SERS active surface. This innovative approach granted the possibility to investigate the dynamics of formation and degradation of polyynes with a time-resolution of a few seconds, starting from the early stages of ablation when the concentration is low. The processes occurring during the synthesis have been studied comparing the in-situ SERS signal of polyynes and byproducts in the solution. The different kinetics of short and long polyynes have been investigated by their in-situ SERS signal, exploring the final distribution of chain lengths. Ex situ UV-Vis and high-performance liquid chromatography confirmed the observations gained from in-situ SERS data and validated this innovative in-situ and in-operando analysis.

physics.chem-ph

Vibrational and nonlinear optical properties of amine-capped push-pull polyynes by infrared and Raman spectroscopy

The vibrational properties of a series of push-pull polyynes have been studied by infrared and Raman spectroscopy. The simultaneous activation of a strong infrared and Raman mode, i.e. the collective vibration of CC bonds of the sp carbon chain, highlights the effectiveness of a polyyne bridge in promoting charge transfer between the electron donor (D) and acceptor (A) ends, thus suggesting that ad-hoc functionalized polyynes are worth being explored as building blocks of organic materials with attractive first-order optical nonlinearity. The optical, electronic, and vibrational properties of these molecules have been investigated with the support of density functional theory calculations, as well as the electronic and vibrational first hyperpolarizabilities ($β$). The mid-low region of the IR spectra (800-1600 cm$^{-1}$) has been analyzed in detail, searching for marker bands of the specific terminations of the different sp carbon chains thus achieving a complete vibrational characterization of sp hybridized push-pull systems.

cond-mat.mes-hall

A $j_\mathrm{eff} = 1/2$ pseudospinon continuum in CaIrO$_3$

In so-called $j_\mathrm{eff} = 1/2$ systems, including some iridates and ruthenates, the coherent superposition of $t_\mathrm{2g}$ orbitals in the ground state gives rise to hopping processes that strongly depend on the bond geometry. Resonant inelastic x-ray scattering (RIXS) measurements on CaIrO$_3$ reveal a prototypical $j_\mathrm{eff} = 1/2$ pseudospinon continuum, a hallmark of one-dimensional (1D) magnetic systems despite its three-dimensional crystal structure. The experimental spectra compare very well to the calculated magnetic dynamical structure factor of weakly coupled spin-1/2 chains. We attribute the onset of such quasi-1D magnetism to the fundamental difference in the magnetic interactions between the $j_\mathrm{eff} = 1/2$ pseudospins along the corner- and edge-sharing bonds in CaIrO$_3$.

cond-mat.str-el

Solvent-dependent termination, size and stability in polyynes synthesis by laser ablation in liquids

In recent years there has been a growing interest in sp-carbon chains as possible novel nanostructures. An example of sp-carbon chains are the so-called polyynes, characterized by the alternation of single and triple bonds that can be synthesized by pulsed laser ablation in liquid (PLAL) of a graphite target. In this work, by exploiting different solvents in the PLAL process, e.g. water, acetonitrile, methanol, ethanol, and isopropanol, we systematically investigate the solvent role in polyyne formation and stability. The presence of methyland cyano-groups in the solutions influences the termination of polyynes, allowing to detect, in addition to hydrogen-capped polyynes up to HC22H, methyl-capped polyynes up to 18 carbon atoms (i.e. HCnCH3) and cyanopolyynes up to HC12CN. The assignment of each species was done by UV-Vis spectroscopy and supported by density functional theory simulations of vibronic spectra. In addition, surface-enhanced Raman spectroscopy allowed to observe differences, due to different terminations (hydrogen, methyl-and cyano group), in the shape and positions of the characteristic Raman bands of the size-selected polyynes. The evolution in time of each polyyne has been investigated evaluating the chromatographic peak area, and the effect of size, terminations and solvents on polyynes stability has been individuated.

cond-mat.mtrl-sci