arXiv subjects

Ping Koy Lam

Publications and source records attributed to Ping Koy Lam.

At least 91 records · Page 5Linked to original sources

arXiv2020

Space qualification of ultrafast laser written integrated waveguide optics

Satellite-based quantum technologies represent a possible route for extending the achievable range of quantum communication, allowing the construction of worldwide quantum networks without quantum repeaters. In space missions, however, the volume available for the instrumentation is limited, and footprint is a crucial specification of the devices that can be employed. Integrated optics could be highly beneficial in this sense, as it allows for the miniaturization of different functionalities in small and monolithic photonic circuits. In this work, we report on the qualification of waveguides fabricated in glass by femtosecond laser micromachining for their use in a low Earth orbit space environment. In particular, we exposed different laser written integrated devices, such as straight waveguides, directional couplers, and Mach-Zehnder interferometers, to suitable proton and $γ$-ray irradiation. Our experiments show that no significant changes have been induced to their characteristics and performances by the radiation exposure. Our results, combined with the high compatibility of laser-written optical circuits to quantum communication applications, pave the way for the use of laser-written integrated photonic components in future satellite missions.

physics.optics↗

arXiv2020

Accessible precisions for estimating two conjugate parameters using Gaussian probes

We analyse the precision limits for simultaneous estimation of a pair of conjugate parameters in a displacement channel using Gaussian probes. Having a set of squeezed states as an initial resource, we compute the Holevo Cramér-Rao bound to investigate the best achievable estimation precisions if only passive linear operations are allowed to be performed on the resource prior to probing the channel. The analysis reveals the optimal measurement scheme and allows us to quantify the best precision for one parameter when the precision of the second conjugate parameter is fixed. To estimate the conjugate parameter pair with equal precision, our analysis shows that the optimal probe is obtained by combining two squeezed states with orthogonal squeezing quadratures on a 50:50 beam splitter. If different importance are attached to each parameter, then the optimal mixing ratio is no longer 50:50. Instead it follows a simple function of the available squeezing and the relative importance between the two parameters.

quant-ph↗

arXiv2020

Optomechanically induced carrier-envelope-phase dependent effects and their analytical solutions

To date, investigations of carrier-envelope-phase (CEP) dependent effects have been limited to optical pulses with few cycles and high intensity, and have not been reported for other types of pulses. Optomechanical systems are shown to have the potential to go beyond these limits. We present an approach using optomechanics to extend the concept of the traditional CEP in the few-cycle regime to mechanical pulses and develop a two-step model to give a physical insight. By adding an auxiliary continuous optical field, we show that a CEP-dependent effect appears even in the multi-cycle regime of mechanical pulses. We obtain the approximated analytical solutions providing full understanding for these optomechanically induced CEP-dependent effects. In addition, our findings show that one can draw on the optomechanical interaction to revive the CEP-dependent effects on optical pulses with an arbitrary number of cycles and without specific intensity requirements. The effects of CEP, broadly extended to encompass few- and multi-cycle optical and mechanical pulses, may stimulate a variety of applications in the preparation of a CEP-stabilized pulse, the generation of ultrasonic pulses with a desired shape, the linear manipulation of optical combs, and more.

physics.optics↗

arXiv2020

Photothermally Induced Transparency

Induced transparency is a common but remarkable effect in optics. It occurs when a strong driving field is used to render an otherwise opaque material transparent. The effect is known as electromagnetically induced transparency in atomic media and optomechanically induced transparency in systems that consist of coupled optical and mechanical resonators. In this work, we introduce the concept of photothermally induced transparency (PTIT). It happens when an optical resonator exhibits non-linear behavior due to optical heating of the resonator or its mirrors. Similar to the established mechanisms for induced transparency, PTIT can suppress the coupling between an optical resonator and a traveling optical field. We further show that the dispersion of the resonator can be modified to exhibit slow or fast light. Because of the relatively slow thermal response, we observe the bandwidth of the PTIT to be $2π\times15.9$ Hz which theoretically suggests a group velocity of as low as $5$ m/s.

physics.optics↗

arXiv2020

Super-transport of Excitons in Atomically Thin Organic Semiconductors at the 2D Quantum Limit

Long-range and fast transport of coherent excitons is important for development of high-speed excitonic circuits and quantum computing applications. However, most of these coherent excitons have only been observed in some low-dimensional semiconductors when coupled with cavities, as there are large inhomogeneous broadening and dephasing effects on the exciton transport in their native states of the materials. Here, by confining coherent excitons at the 2D quantum limit, we firstly observed molecular aggregation enabled super-transport of excitons in atomically thin two-dimensional (2D) organic semiconductors between coherent states, with a measured a high effective exciton diffusion coefficient of 346.9 cm2/sec at room temperature. This value is one to several orders of magnitude higher than the reported values from other organic molecular aggregates and low-dimensional inorganic materials. Without coupling to any optical cavities, the monolayer pentacene sample, a very clean 2D quantum system (1.2 nm thick) with high crystallinity (J type aggregation) and minimal interfacial states, showed superradiant emissions from the Frenkel excitons, which was experimentally confirmed by the temperature-dependent photoluminescence (PL) emission, highly enhanced radiative decay rate, significantly narrowed PL peak width and strongly directional in-plane emission. The coherence in monolayer pentacene samples was observed to be delocalized over 135 molecules, which is significantly larger than the values (a few molecules) observed from other organic thin films. In addition, the super-transport of excitons in monolayer pentacene samples showed highly anisotropic behaviour. Our results pave the way for the development of future high-speed excitonic circuits, fast OLEDs, and other opto-electronic devices.

cond-mat.mtrl-sci↗

arXiv2019

Dynamics and Stability of an Optically Levitated Mirror

We analyse the dynamics of a one-dimensional vertical Fabry-Pérot cavity, where the upper mirror levitates due to intra-cavity radiation pressure force. A perturbative approach is used based around separation of timescales, which allows us to calculate the physical quantities of interest. Due to the dynamics of the cavity field, we find that the upper mirror's motion will always be unstable for levitation performed using only a single laser. Stability can be achieved for two lasers, where one provides the trapping potential and the other a damping effect, and we locate and characterise all parameter regimes where this can occur. Finally we analyse photothermal effects due to heating of the mirror substrate. We show that this can stabilise the system, even with only a single input laser, if it acts to increase the optical path length of the cavity. This work serves as a foundation for understanding how levitated optical cavity schemes can be used as stable metrological platforms.

quant-ph↗

arXiv2019

Stationary light in atomic media

When ensembles of atoms interact with coherent light fields a great many interesting and useful effects can be observed. In particular, the group velocity of the coherent fields can be modified dramatically. Electromagnetically induced transparency is perhaps the best known example, giving rise to very slow light. Careful tuning of the optical fields can also produce stored light where a light field is mapped completely into a coherence of the atomic ensemble. In contrast to stored light, in which the optical field is extinguished, stationary light is a bright field of light with a group velocity of zero. Stationary light has applications in situations where it is important to maintain an optical field, such as attempts to engineer large nonlinear interactions. In this paper we review the stationary light demonstrations published to date and provide a unified theoretical framework that describes the experimental observations. We also discuss possible applications of stationary light with a particular focus on all-optical phase gates for quantum information technology.

quant-ph↗

arXiv2019

Atomic Localization of Quantum Emitters in Multilayer Hexagonal Boron Nitride

The recent discovery of single-photon emitting defects hosted by the two-dimensional wide band gap semiconductor hexagonal boron nitride (hBN) has inspired a great number of experiments. Key characteristics of these quantum emitters are their capability to operate at room temperature with a high luminosity. In spite of large theoretical and experimental research efforts, the exact nature of the emission remains unresolved. In this work we utilize layer-by-layer etching of multilayer hBN to localize the quantum emitters with atomic precision. Our results suggest the position of the emitters correlates with the fabrication method: emitters formed under plasma treatment are always in close proximity to the crystal surface, while emitters created under electron irradiation are distributed randomly throughout the entire crystal. This disparity could be traced back to the lower kinetic energy of the ions in the plasma compared to the kinetic energy of the electrons in the particle accelerator. The emitter distance to the surface also correlates with the excited state lifetime: near-surface emitters have a shorter compared to emitters deep within the crystal. Finite-difference time-domain and density functional theory simulations show that optical and electronic effects are not responsible for this difference, indicating effects such as coupling to surface defects or phonons might cause the reduced lifetime. Our results pave a way toward identification of the defect, as well as engineering the emitter properties.

cond-mat.mes-hall↗

arXiv2019

Real-Time Source Independent Quantum Random Number Generator with Squeezed States

Random numbers are a fundamental ingredient for many applications including simulation, modelling and cryptography. Sound random numbers should be independent and uniformly distributed. Moreover, for cryptographic applications they should also be unpredictable. We demonstrate a real-time self-testing source independent quantum random number generator (QRNG) that uses squeezed light as source. We generate secure random numbers by measuring the quadratures of the electromagnetic field without making any assumptions on the source; only the detection device is trusted. We use a homodyne detection to alternatively measure the Q and P conjugate quadratures of our source. Using the entropic uncertainty relation, measurements on P allow us to estimate a bound on the min-entropy of Q conditioned on any classical or quantum side information that a malicious eavesdropper may detain. This bound gives the minimum number of secure bits we can extract from the Q measurement. We discuss the performance of different estimators for this bound. We operate this QRNG with a squeezed state and we compare its performance with a QRNG using thermal states. The real-time bit rate was 8.2 kb/s when using the squeezed source and between 5.2-7.2 kb/s when the thermal state source was used.

quant-ph↗

arXiv2019

Space-compatible cavity-enhanced single-photon generation with hexagonal boron nitride

Sources of pure and indistinguishable single-photons are critical for near-future optical quantum technologies. Recently, color centers hosted by two-dimensional hexagonal boron nitride (hBN) have emerged as a promising platform for high luminosity room temperature single-photon sources. Despite the brightness of the emitters, the spectrum is rather broad and the single-photon purity is not sufficient for practical quantum information processing. Here, we report integration of such a quantum emitter hosted by hBN into a tunable optical microcavity. A small mode volume of the order of $λ^3$ allows us to Purcell enhance the fluorescence, with the observed excited state lifetime shortening. The cavity significantly narrows the spectrum and improves the single-photon purity by suppression of off-resonant noise. We explore practical applications by evaluating the performance of our single-photon source for quantum key distribution and quantum computing. The complete device is compact and implemented on a picoclass satellite platform, enabling future low-cost satellite-based long-distance quantum networks.

quant-ph↗

arXiv2019

Time-reversed and coherently-enhanced memory: A single-mode quantum atom-optic memory without a cavity

The efficiency of an ensemble-based optical quantum memory depends critically on the strength of the atom-light coupling. An optical cavity is an effective method to enhance atom-light coupling strength, with the drawback that cavities can be difficult to integrate into a memory setup. In this work we show coherent enhancement of atom-light coupling via an interference effect. The light to be absorbed into the atomic ensemble is split and used to drive the atoms from opposite ends of the ensemble. We compare this method theoretically to a cavity enhanced scheme and present experimental results for our coherent enhancement in cold rubidium-87 atoms that show an efficiency of $72\pm5\%$ and a storage lifetime of $110\pm 10$ us.

quant-ph↗

arXiv2019

A tight Cramér-Rao bound for joint parameter estimation with a pure two-mode squeezed probe

We calculate the Holevo Cramér-Rao bound for estimation of the displacement experienced by one mode of an two-mode squeezed vacuum state with squeezing r and find that it is equal to 4exp(-2r). This equals the sum of the mean squared error obtained from a dual homodyne measurement, indicating that the bound is tight and that the dual homodyne measurement is optimal.

quant-ph↗

arXiv2018

Entanglement properties of a measurement-based entanglement distillation experiment

Measures of entanglement can be employed for the analysis of numerous quantum information protocols. Due to computational convenience, logarithmic negativity is often the choice in the case of continuous variable systems. In this work, we analyse a continuous variable measurement-based entanglement distillation experiment using a collection of entanglement measures. This includes: logarithmic negativity, entanglement of formation, distillable entanglement, relative entropy of entanglement, and squashed entanglement. By considering the distilled entanglement as a function of the success probability of the distillation protocol, we show that the logarithmic negativity surpasses the bound on deterministic entanglement distribution at a relatively large probability of success. This is in contrast to the other measures which would only be able to do so at much lower probabilities, hence demonstrating that logarithmic negativity alone is inadequate for assessing the performance of the distillation protocol. In addition to this result, we also observed an increase in the distillable entanglement by making use of upper and lower bounds to estimate this quantity. We thus demonstrate the utility of these theoretical tools in an experimental setting.

quant-ph↗

arXiv2018

Radiation tolerance of two-dimensional material-based devices for space applications

Characteristic for devices based on two-dimensional materials are their low size, weight and power requirements. This makes them advantageous for use in space instrumentation, including photovoltaics, batteries, electronics, sensors and light sources for long-distance quantum communication. Here, we present for the first time a comprehensive study on combined radiation effects in earth's atmosphere on various devices based on these nanomaterials. Using theoretical modeling packages, we estimate relevant radiation levels and then expose field-effect transistors, single-photon sources and monolayers as building blocks for future electronics to gamma-rays, protons and electrons. The devices show negligible change in performance after the irradiation, suggesting robust suitability for space use. Under excessive $γ$-radiation, however, monolayer WS$_2$ showed decreased defect densities, identified by an increase in photoluminescence, carrier lifetime and a change in doping ratio proportional to the photon flux. The underlying mechanism was traced back to radiation-induced defect healing, wherein dissociated oxygen passivates sulfur vacancies.

cond-mat.mtrl-sci↗

arXiv2018

Gaussian multipartite quantum discord from classical mutual information

Quantum discord is a measure of non-classical correlations, which are excess correlations inherent in quantum states that cannot be accessed by classical measurements. For multipartite states, the classically accessible correlations can be defined by the mutual information of the multipartite measurement outcomes. In general the quantum discord of an arbitrary quantum state involves an optimisation of over the classical measurements which is hard to compute. In this paper, we examine the quantum discord in the experimentally relevant case when the quantum states are Gaussian and the measurements are restricted to Gaussian measurements. We perform the optimisation over the measurements to find the Gaussian discord of the bipartite EPR state and tripartite GHZ state in the presence of different types of noise: uncorrelated noise, multiplicative noise and correlated noise. We find that by adding uncorrelated noise and multiplicative noise, the quantum discord always decreases. However, correlated noise can either increase or decrease the quantum discord. We also find that for low noise, the optimal classical measurements are single quadrature measurements. As the noise increases, a dual quadrature measurement becomes optimal.

quant-ph↗

arXiv2018

Quantum enhancement of signal-to-noise ratio with a heralded linear amplifier

Due to the pervasive nature of decoherence, protection of quantum information during transmission is of critical importance for any quantum network. A linear amplifier that can enhance quantum signals stronger than their associated noise while preserving quantum coherence is therefore of great use. This seemingly unphysical amplifier property is achievable for a class of probabilistic amplifiers that does not work deterministically. Here we present a linear amplification scheme that realises this property for coherent states by combining a heralded measurement-based noiseless linear amplifier and a deterministic linear amplifier. The concatenation of two amplifiers introduces the flexibility that allows one to tune between the regimes of high-gain or high noise-reduction, and control the trade-off of these performances against a finite heralding probability. We demonstrate an amplification signal transfer coefficient of $\mathcal{T}_s > 1$ with no statistical distortion of the output state. By partially relaxing the demand of output Gaussianity, we can obtain further improvement to achieve a $\mathcal{T}_s = 2.55 \pm 0.08$. Our amplification scheme only relies on linear optics and post-selection algorithm. We discuss the potential of using this amplifier as a building block in extending the distance of quantum communication.

physics.optics↗

arXiv2018

High-performance Raman memory with spatio-temporal reversal

A number of techniques exist to use an ensemble of atoms as a quantum memory for light. Many of these propose to use backward retrieval as a way to improve the storage and recall efficiency. We report on a demonstration of an off-resonant Raman memory that uses backward retrieval to achieve an efficiency of $65\pm6\%$ at a storage time of one pulse duration. The memory has a characteristic decay time of 60 $μ$s, corresponding to a delay-bandwidth product of $160$.

quant-ph↗

arXiv2018

Multiparameter optimisation of a magneto-optical trap using deep learning

Many important physical processes have dynamics that are too complex to completely model analytically. Optimisation of such processes often relies on intuition, trial-and-error, or the construction of empirical models. Machine learning based on artificial neural networks has emerged as an efficient means to develop empirical models of complex systems. We implement a deep artificial neural network to optimise the magneto-optic cooling and trapping of neutral atomic ensembles. Cold atomic ensembles have become commonplace in laboratories around the world, however, many-body interactions give rise to complex dynamics that preclude precise analytic optimisation of the cooling and trapping process. The solution identified by machine learning is radically different to the smoothly varying adiabatic solutions currently used. Despite this, the solutions vastly outperform best known solutions producing higher optical densities. This may provide a pathway to a new understanding of the dynamics of the cooling and trapping processes in cold atomic ensembles.

quant-ph↗