arXiv subjects

Ping Yang

Publications and source records attributed to Ping Yang.

At least 109 records · Page 6Linked to original sources

arXiv2018

Anisotropic Gilbert damping in perovskite La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ thin film

The viscous Gilbert damping parameter governing magnetization dynamics is of primary importance for various spintronics applications. Although, the damping constant is believed to be anisotropic by theories. It is commonly treated as a scalar due to lack of experimental evidence. Here, we present an elaborate angle dependent broadband ferromagnetic resonance study of high quality epitaxial La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ films. Extrinsic effects are suppressed and we show convincing evidence of anisotropic damping with twofold symmetry at room temperature. The observed anisotropic relaxation is attributed to the magnetization orientation dependence of the band structure. In addition, we demonstrated that such anisotropy can be tailored by manipulating the stain. This work provides new insights to understand the mechanism of magnetization relaxation.

cond-mat.mtrl-sci↗

arXiv2018

Study on planar segregation of solute atoms in Mg-Al-Gd alloy system

Solute segregation plays an important role in formation of long-period stacking ordered (LPSO) structure in Mg-M-RE (M: Zn, Ni etc., RE: Y, Gd, etc.) alloy systems. In this work, the planar segregation in Mg-Al-Gd alloy is characterized by high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) and three-dimensional atom probe (3DAP). It is found there is no planar fault accompanying the segregation, and the spatial distribution of segregation may resemble the periodicity of LPSO structure. The segregation is further quantified by 3DAP, and it mainly enriches with Gd atoms. The segregation behaviour is rationalized by First-Principles calculation.

cond-mat.mtrl-sci↗

arXiv2018

Anatomy of $B_s \to PV $ decays and effects of next-to-leading order contributions in the perturbative QCD factorization approach

In this paper, we will make systematic calculations for the branching ratios and the CP-violating asymmetries of the twenty one $\bar{B}^0_s \to PV $ decays by employing the perturbative QCD (PQCD) factorization approach. Besides the full leading-order (LO) contributions, all currently known next-to-leading order (NLO) contributions are taken into account. We found numerically that: (a) the NLO contributions can provide $\sim 40\%$ enhancement to the LO PQCD predictions for ${\cal B}(\bar{B}_s^0 \to K^0 \bar{K}^{*0})$ and $ {\cal B}(\bar{B}_s^0 \to K^{\pm}K^{*\mp})$, or a $\sim 37\% $ reduction to $ \calb(\bar{B}_s^0 \to π^{-} K^{*+})$, and we confirmed that the inclusion of the known NLO contributions can improve significantly the agreement between the theory and those currently available experimental measurements, (b) the total effects on the PQCD predictions for the relevant $B\to P$ transition form factors after the inclusion of the NLO twist-2 and twist-3 contributions is generally small in magnitude: less than $ 10\%$ enhancement respect to the leading order result, (c) for the "tree" dominated decay $\bar B_s^0\to K^+ ρ^- $ and the "color-suppressed-tree" decay $\bar B_s^0\to π^0 K^{*0}$, the big difference between the PQCD predictions for their branching ratios are induced by different topological structure and by interference effects among the decay amplitude ${\cal A}_{T,C}$ and ${\cal A}_P$: constructive for the first decay but destructive for the second one, and (d) for $\bar{B}_s^0 \to V(η, \etar)$ decays, the complex pattern of the PQCD predictions for their branching ratios can be understood by rather different topological structures and the interference effects between the decay amplitude $\cala(Vη_q)$ and $\cala(Vη_s)$ due to the $η-\etar$ mixing.

hep-ph↗

arXiv2017

The Mechanism of Electrolyte Gating on High-Tc Cuprates: The Role of Oxygen Migration and Electrostatics

Electrolyte gating is widely used to induce large carrier density modulation on solid surfaces to explore various properties. Most of past works have attributed the charge modulation to electrostatic field effect. However, some recent reports have argued that the electrolyte gating effect in VO2, TiO2 and SrTiO3 originated from field-induced oxygen vacancy formation. This gives rise to a controversy about the gating mechanism, and it is therefore vital to reveal the relationship between the role of electrolyte gating and the intrinsic properties of materials. Here, we report entirely different mechanisms of electrolyte gating on two high-Tc cuprates, NdBa2Cu3O7-δ (NBCO) and Pr2-xCexCuO4 (PCCO), with different crystal structures. We show that field-induced oxygen vacancy formation in CuO chains of NBCO plays the dominant role while it is mainly an electrostatic field effect in the case of PCCO. The possible reason is that NBCO has mobile oxygen in CuO chains while PCCO does not. Our study helps clarify the controversy relating to the mechanism of electrolyte gating, leading to a better understanding of the role of oxygen electro migration which is very material specific.

cond-mat.str-el↗

arXiv2017

On atomic structure of Guinier-Preston Zone in Mg-Zn-Gd alloy

The atomic structure of Guinier-Preston (G.P.) zone in an Mg-Zn-Gd alloy has been determined by combining atomic resolution high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) and first-principles calculation. The G.P. Zone consists of three atomic layers paralleling to (0001) plane of Mg matrix, where two outer layers enrich with Gd while the middle layer enriches with Zn. Moreover, it is found that most of the structures reported previously are unstable and should converge to the present result after atomic relaxation, even though the atomic species and positions in the middle layer vary in those models.

cond-mat.mtrl-sci↗

arXiv2017

Control of magnetic anisotropy by orbital hybridization in (La0.67Sr0.33MnO3)n/(SrTiO3)n superlattice

The asymmetry of chemical nature at the hetero-structural interface offers an unique opportunity to design desirable electronic structure by controlling charge transfer and orbital hybridization across the interface. However, the control of hetero-interface remains a daunting task. Here, we report the modulation of interfacial coupling of (La0.67Sr0.33MnO3)n/(SrTiO3)n superlattices by manipulating the periodic thickness with n unit cells of SrTiO3 and n unit cells La0.67Sr0.33MnO3. The easy axis of magnetic anisotropy rotates from in-plane (n = 10) to out-of-plane (n = 2) orientation at 150 K. Transmission electron microscopy reveals enlarged tetragonal ratio > 1 with breaking of volume conservation around the (La0.67Sr0.33MnO3)n/(SrTiO3)n interface, and electronic charge transfer from Mn to Ti 3d orbitals across the interface. Orbital hybridization accompanying the charge transfer results in preferred occupancy of 3d3z2-r2 orbital at the interface, which induces a stronger electronic hopping integral along the out-of-plane direction and corresponding out-of-plane magnetic easy axis for n = 2. We demonstrate that interfacial orbital hybridization in superlattices of strongly correlated oxides may be a promising approach to tailor electronic and magnetic properties in device applications.

cond-mat.mtrl-sci↗

arXiv2017

A beam monitor using silicon pixel sensors for hadron therapy

We report the design and test results of a beam monitor developed for online monitoring in hadron therapy. The beam monitor uses eight silicon pixel sensors, \textit{Topmetal-${II}^-$}, as the anode array. \textit{Topmetal-${II}^-$} is a charge sensor designed in a CMOS 0.35 $μ$m technology. Each \textit{Topmetal-${II}^-$} sensor has $72\times72$ pixels and the pixel size is $83\times83$ $μ$m$^2$. In our design, the beam passes through the beam monitor without hitting the electrodes, making the beam monitor especially suitable for monitoring heavy ion beams. This design also reduces radiation damage to the beam monitor itself. The beam monitor is tested with a carbon ion beam at the Heavy Ion Research Facility in Lanzhou (HIRFL). Results indicate that the beam monitor can measure position, incidence angle and intensity of the beam with a position resolution better than 20 $μ$m, angular resolution about 0.5$^\circ$ and intensity statistical accuracy better than 2$\%$.

physics.ins-det↗

arXiv2017

A highly pixelated CdZnTe detector based on \textit{Topmetal-${II}^-$} sensor

\textit{Topmetal-${II}^-$} is a low noise CMOS pixel direct charge sensor with a pitch of 83$μm$. CdZnTe is an excellent semiconductor material for radiation detection. The combination of CdZnTe and the sensor makes it possible to build a detector with high spatial resolution. In our experiments, an epoxy adhesive is used as the conductive medium to connect the sensor and Cadmium Zinc Telluride (CdZnTe). The diffusion coefficient and charge efficiency of electrons are measured at a low bias voltage of -2 Volts, and the image of a single alpha is clear with a reasonable spatial resolution. The detector of such structure has the potential to be applied in X-ray imaging systems with a further improvements of the sensor.

physics.ins-det↗

arXiv2016

Detailed study of the column-based priority logic readout of Topmetal-II- CMOS pixel direct charge sensor

We present the detailed study of the digital readout of Topmetal-II- CMOS pixel direct charge sensor. Topmetal-II- is an integrated sensor with an array of 72X72 pixels each capable of directly collecting external charge through exposed metal electrodes in the topmost metal layer. In addition to the time-shared multiplexing readout of the analog output from Charge Sensitive Amplifiers in each pixel, hits are also generated through comparators with individually DAC settable thresholds in each pixel. The hits are read out via a column-based priority logic structure, retaining both hit location and time information. The in-array column-based priority logic is fully combinational hence there is no clock distributed in the pixel array. Sequential logic and clock are placed on the peripheral of the array. We studied the detailed working behavior and performance of this readout, and demonstrated its potential in imaging applications.

physics.ins-det↗

arXiv2016

Test of \textit{Topmetal-${II}^-$} In Liquid Nitrogen For Cryogenic Temperature TPCs

\textit{Topmetal-${II}^-$} is a highly pixelated direct charge sensor that contains a 72${\times}$72 pixel array of 83$μ$m pitch size. The key feature of \textit{Topmetal-${II}^-$} is that it can directly collect charges via metal nodes of each pixel to form two-dimensional images of charge cloud distributions. \textit{Topmetal-${II}^-$} was proved to measure charged particles without amplification at room temperature. To measure its performance at cryogenic temperature, a \textit{Topmetal-${II}^-$} sensor is embedded into a liquid nitrogen dewar. The results presented in this paper show that \textit{Topmetal-${II}^-$} can also operate well at this low temperature with a noise (ENC) of 12 e$^-$ lower than that at room temperature (13 e$^-$). From the noise perspective, \textit{Topmetal-${II}^-$} is a promising candidate for the next generation readout of liquid argon and xenon Time Projection Chamber (TPC) used in experiments searching for neutrinoless double beta decay and dark matter.

physics.ins-det↗

arXiv2016

First-principles modeling of electromagnetic scattering by discrete and discretely heterogeneous random media

The main objective of this Report is to formulate the general theoretical framework of electromagnetic scattering by discrete random media rooted in the Maxwell-Lorentz electromagnetics and discuss its immediate analytical and numerical consequences. Starting from the microscopic Maxwell-Lorentz equations, we trace the development of the first-principles formalism enabling accurate calculations of monochromatic and quasi-monochromatic scattering by static and randomly varying multiparticle groups. We illustrate how this general framework can be coupled with state-of-the-art computer solvers of the Maxwell equations and applied to direct modeling of electromagnetic scattering by representative random multi-particle groups with arbitrary packing densities. This first-principles modeling yields general physical insights unavailable with phenomenological approaches. We discuss how the first-order-scattering approximation, the radiative transfer theory, and the theory of weak localization of electromagnetic waves can be derived as immediate corollaries of the Maxwell equations for very specific and well-defined kinds of particulate medium. These recent developments confirm the mesoscopic origin of the radiative transfer, weak localization, and effective-medium regimes and help evaluate the numerical accuracy of widely used approximate modeling methodologies.

physics.optics↗

arXiv2016

Flexible MgO barrier magnetic tunnel junctions

Flexible electronic devices require the integration of multiple crucial components on soft substrates to achieve their functions. In particular, memory devices are the fundamental component for data storage and processing in flexible electronics. Here, we present flexible MgO barrier magnetic tunnel junction (MTJ) devices fabricated using a transfer printing process, which exhibit reliable and stable operation under substantial deformation of the device substrates. In addition, the flexible MTJ devices yield significantly enhanced tunneling magnetoresistance (TMR) of ~300 % and improved abruptness of switching, as residual strain in the MTJ structure induced by the fabrication process is released during the transfer process. This approach could be useful for a wide range of flexible electronic systems that require high performance memory components.

cond-mat.mtrl-sci↗

arXiv2015

A Low-Noise CMOS Pixel Direct Charge Sensor, Topmetal-II-

We report the design and characterization of a CMOS pixel direct charge sensor, Topmetal-II-, fabricated in a standard 0.35um CMOS Integrated Circuit process. The sensor utilizes exposed metal patches on top of each pixel to directly collect charge. Each pixel contains a low-noise charge-sensitive preamplifier to establish the analog signal and a discriminator with tunable threshold to generate hits. The analog signal from each pixel is accessible through time-shared multiplexing over the entire array. Hits are read out digitally through a column-based priority logic structure. Tests show that the sensor achieved a <15e- analog noise and a 200e- minimum threshold for digital readout per pixel. The sensor is capable of detecting both electrons and ions drifting in gas. These characteristics enable its use as the charge readout device in future Time Projection Chambers without gaseous gain mechanism, which has unique advantages in low background and low rate-density experiments.

physics.ins-det↗

arXiv2015

Difference of forbidden pairs containing a claw

When we study forbidden subgraph conditions guaranteeing graphs to have some properties, a claw (or $K_{1,3}$) frequently appears as one of forbidden subgraphs. Recently, Furuya and Tsuchiya compared two classes generated by different forbidden pairs containing a claw, and characterized one of such classes. In this paper, we give such characterization for three new classes. Furthermore, we give applications of our characterizations to some forbidden subgraph problems.

math.CO↗

arXiv2015

Multi-photon dressing of an anharmonic superconducting many-level quantum circuit

We report on the investigation of a superconducting anharmonic multi-level circuit that is coupled to a harmonic readout resonator. We observe multi-photon transitions via virtual energy levels of our system up to the fifth excited state. The back-action of these higher-order excitations on our readout device is analyzed quantitatively and demonstrated to be in accordance with theoretical expectation. By applying a strong microwave drive we achieve multi-photon dressing within our anharmonic circuit which is dynamically coupled by a weak probe tone. The emerging higher-order Rabi sidebands and associated Autler-Townes splittings involving up to five levels of the investigated anharmonic circuit are observed. Experimental results are in good agreement with master equation simulations.

cond-mat.mes-hall↗

arXiv2014

Minimum degree condition for spanning generalized Halin graphs

A spanning tree with no vertices of degree 2 is called a Homeomorphically irreducible spanning tree\,(HIST). Based on a HIST embedded in the plane, a Halin graph is formed by connecting the leaves of the tree into a cycle following the cyclic order determined by the embedding. Both of the determination problems of whether a graph contains a HIST or whether a graph contains a spanning Halin graph are shown to be NP-complete. It was conjectured by Albertson, Berman, Hutchinson, and Thomassen in 1990 that a {\it every surface triangulation of at least four vertices contains a HIST}\,(confirmed). And it was conjectured by Lovász and Plummer that {\it every 4-connected plane triangulation contains a spanning Halin graph}\,(disproved). Balancing the above two facts, in this paper, we consider generalized Halin graphs, a family of graph structures which are "stronger" than HISTs but "weaker" than Halin graphs in the sense of their construction constraints. To be exact, a generalized Halin graph is formed from a HIST by connecting its leaves into a cycle. Since a generalized Halin graph needs not to be planar, we investigate the minimum degree condition for a graph to contain it as a spanning subgraph. We show that there exists a positive integer $n_0$ such that any 3-connected graph with $n\ge n_0$ vertices and minimum degree at least $(2n+3)/5$ contains a spanning generalized Halin graph. As an application, the result implies that under the same condition, the graph $G$ contains a wheel-minor of order at least $n/2$. The minimum degree condition in the result is best possible.

math.CO↗

arXiv2014

Development of a highly pixelated direct charge sensor, Topmetal-I, for ionizing radiation imaging

Using industrial standard 0.35μm CMOS Integrated Circuit process, we realized a highly pixelated sensor that directly collects charge via metal nodes placed on the top of each pixel and forms two dimensional images of charge cloud distribution. The first version, Topmetal-I, features a 64x64 pixel array of 80μm pitch size. Direct charge calibration reveals an average capacitance of 210fF per pixel. The charge collection noise is near the thermal noise limit. With the readout, individual pixel channels exhibit a most probable equivalent noise charge of 330e-.

physics.ins-det↗

arXiv2013

Unit cell determination of epitaxial thin films based on reciprocal space vectors by high-resolution X-ray diffractometry

A new approach, based on reciprocal space vectors (RSVs), is developed to determine Bravais lattice types and accurate lattice parameters of epitaxial thin films by high-resolution X-ray diffractometry (HR-XRD). The lattice parameters of single crystal substrates are employed as references to correct the systematic experimental errors of RSVs of thin films. The general procedure is summarized, involving correction of RSVs, derivation of raw unit cell, subsequent conversion to the Niggli unit cell and the Bravais unit cell by matrix calculation.Two methods of this procedure are described in 3D reciprocal space and 6D G6-space, respectively. The estimation of standard error in the lattice parameters derived by this new approach is discussed. The whole approach is illustrated by examples of experimental data. The error of the best result is 0.0006 Å for the lattice parameter of ITO (Indium tin oxide) film. This new RSV method provides a practical and concise route to crystal structure study of epitaxial thin films, which could also be applied to the investigation of surface and interface structures.

cond-mat.mtrl-sci↗