arXiv subjects

Ping-Heng Tan

Publications and source records attributed to Ping-Heng Tan.

At least 37 records · Page 2Linked to original sources

arXiv2020

Dynamic fingerprint of fractionalized excitations in single-crystalline Cu$_3$Zn(OH)$_6$FBr

Quantum spin liquid (QSL) represents a new class of condensed matter states characterized by the long-range many-body entanglement of topological orders. The most prominent feature of the elusive QSL state is the existence of fractionalized spin excitations. Subject to the strong quantum fluctuations, the spin-1/2 antiferromagnetic system on a kagome lattice is the promising candidate for hosting a QSL ground state, but the structurally ideal realization is rare. Here, we report Raman scattering on the single crystalline Cu$_3$Zn(OH)$_6$FBr, and confirm that the ideal kagome structure remains down to low temperatures without any lattice distortion by the angle-resolved polarized Raman responses and second-harmonic-generation measurements. Furthermore, at low temperatures the Raman scattering reveals a continuum of the spin excitations in Cu$_3$Zn(OH)$_6$FBr, in contrast to the sharp magnon peak in the ordered kagome antiferromagnet EuCu$_3$(OH)$_6$Cl$_3$. Such magnetic Raman continuum, in particular, the substantial low-energy one-pair spinon excitation serves as strong evidence for fractionalized spin excitations in Cu$_3$Zn(OH)$_6$FBr.

cond-mat.str-el↗

arXiv2020

Observation of nonreciprocal magneto-optical scattering in nonencapsulated few-layered CrI3

Magneto-optical effect refers to a rotation of polarization plane, which has been widely studied in traditional ferromagnetic metal and insulator films and scarcely in two-dimensional layered materials. Here we uncover a new nonreciprocal magneto-inelastic light scattering effect in ferromagnetic few-layer CrI3. We observed a rotation of the polarization plane of inelastic light scattering between -20o and +60o that are tunable by an out-of-plane magnetic field from -2.5 to 2.5 T. It is experimentally observed that the degree of polarization can be magnetically manipulated between -20% and 85%. This work raises a new magneto-optical phenomenon and could create opportunities of applying 2D ferromagnetic materials in Raman lasing, topological photonics, and magneto-optical modulator for information transport and storage.

cond-mat.mtrl-sci↗

arXiv2020

Phonon Renormalization in Reconstructed MoS$_2$ Moiré Superlattices

In moiré crystals formed by stacking van der Waals (vdW) materials, surprisingly diverse correlated electronic phases and optical properties can be realized by a subtle change in the twist angle. Here, we discover that phonon spectra are also renormalized in MoS$_2$ twisted bilayers, adding a new perspective to moiré physics. Over a range of small twist angles, the phonon spectra evolve rapidly due to ultra-strong coupling between different phonon modes and atomic reconstructions of the moiré pattern. We develop a new low-energy continuum model for phonons that overcomes the outstanding challenge of calculating properties of large moiré supercells and successfully captures essential experimental observations. Remarkably, simple optical spectroscopy experiments can provide information on strain and lattice distortions in moiré crystals with nanometer-size supercells. The newly developed theory promotes a comprehensive and unified understanding of structural, optical, and electronic properties of moiré superlattices.

cond-mat.mes-hall↗

arXiv2020

Understanding angle-resolved polarized Raman scattering from black phosphorus at normal and oblique laser incidences

The selection rule for angle-resolved polarized Raman (ARPR) intensity of phonons from standard group-theoretical method in isotropic materials would break down in anisotropic layered materials (ALMs) due to birefringence and linear dichroism effects. The two effects result in depth-dependent polarization and intensity of incident laser and scattered signal inside ALMs and thus make a challenge to predict ARPR intensity at any laser incidence direction. Herein, taking in-plane anisotropic black phosphorus as a prototype, we developed a so-called birefringence-linear-dichroism (BLD) model to quantitatively understand its ARPR intensity at both normal and oblique laser incidences by the same set of real Raman tensors for certain laser excitation. No fitting parameter is needed, once the birefringence and linear dichroism effects are considered with the complex refractive indexes. An approach was proposed to experimentally determine real Raman tensor and complex refractive indexes, respectively, from the relative Raman intensity along its principle axes and incident-angle resolved reflectivity by Fresnel$'$s law. The results suggest that the previously reported ARPR intensity of ultrathin ALM flakes deposited on a multilayered substrate at normal laser incidence can be also understood based on the BLD model by considering the depth-dependent polarization and intensity of incident laser and scattered Raman signal induced by both birefringence and linear dichroism effects within ALM flakes and the interference effects in the multilayered structures, which are dependent on the excitation wavelength, thickness of ALM flakes and dielectric layers of the substrate. This work can be generally applicable to any opaque anisotropic crystals, offering a promising route to predict and manipulate the polarized behaviors of related phonons.

cond-mat.mtrl-sci↗

arXiv2020

Giant-Shell CdSe/CdS Nanocrystals: Exciton Coupling to Shell Phonons Investigated by Resonant Raman Spectroscopy

The interaction between excitons and phonons in semiconductor nanocrystals plays a crucial role in the exciton energy spectrum and dynamics, and thus in their optical properties. We investigate the exciton2 phonon coupling in giant-shell CdSe/CdS core-shell nanocrystals via resonant Raman spectroscopy. The Huang-Rhys parameter is evaluated by the intensity ratio of the longitudinal-optical (LO) phonon of CdS with its first multiscattering (2LO) replica. We used four different excitation wavelengths in the range from the onset of the CdS shell absorption to well above the CdS shell band edge to get insight into resonance effects of the CdS LO phonon with high energy excitonic transitions. The isotropic spherical giant-shell nanocrystals show consistently stronger exciton-phonon coupling as compared to the anisotropic rod-shaped dot-in-rod (DiR) architecture, and the 2LO/LO intensity ratio decreases for excitation wavelengths approaching the CdS band edge. The strong exciton-phonon coupling in the spherical giant-shell nanocrystals can be related to the delocalization of the electronic wave functions. Furthermore, we observe the radial breathing modes of the GS nanocrystals and their overtones by ultralow frequency Raman spectroscopy with nonresonant excitation, using laser energies well below the band gap of the heteronanocrystals, and highlight the differences between higher order

physics.chem-ph↗

arXiv2020

Directional Anisotropy of the Vibrational Modes in 2D Layered Perovskites

The vibrational modes in organic/inorganic layered perovskites are of fundamental importance for their optoelectronic properties. The hierarchical architecture of the Ruddlesden-Popper phase of these materials allows for distinct directionality of the vibrational modes withrespect to the main axes of the pseudocubic lattice in the octahedral plane. Here, we study the directionality of the fundamental phonon modes in single exfoliated Ruddlesden-Popper perovskite flakes with polarized Raman spectroscopy at ultralow-frequencies. A wealth of Raman bands is distinguished in the range from 15-150 cm-1 (2-15 meV), whose features depend on the organic cation species, on temperature, and on the direction of the linear polarization of the incident light. By controlling the angle of the linear polarization of the excitation laser with respect to the in-plane axes of the octahedral layer, we gain detailed information on the symmetry of the vibrational modes. The choice of two different organic moieties, phenethylammonium (PEA) and butylammonium (BA) allows to discern the influence of the linker molecules, evidencing strong anisotropy of the vibrations for the (PEA)2PbBr4 samples. Temperature dependent Raman measurements reveal that the broad phonon bands observed at room temperature consist of a series of sharp modes, and that such mode splitting strongly differs for the different organic moieties and vibrational bands.

physics.chem-ph↗

arXiv2019

Breakdown of Raman Selection Rules By Fröhlich Interaction in Few-Layer WS$_2$

The Raman selection rules arise from the crystal symmetry and then determine the Raman activity and polarization of scattered phonon modes. However, these selection rules can be broken in resonant process due to the strong electron-phonon coupling effect. Here we reported the observation of breakdown of Raman selection rules in few-layer WS$_2$ by using resonant Raman scattering with dark A exciton. In this case, not only the infrared active modes and backscattering forbidden modes are observed, but the intensities of all observed phonon modes become strongest under paralleled-polarization and independent on the Raman tensors of phonons. We attributed this phenomenon to the interaction between dark A exciton and the scatted phonon, the so-called intraband Fröhlich interaction, where the Raman scattering possibility is totally determined by the symmetry of exciton rather than the phonons due to strong electron-phonon coupling. Our results not only can be used to easily detect the optical forbidden excitonic and phononic states but also provide a possible way to manipulate optical transitions between electronic levels.

cond-mat.mtrl-sci↗

arXiv2019

Linear Dichroism Conversion in Quasi One-Dimensional Perovskite Chalcogenide

Anisotropic photonic materials with linear dichroism are crucial components in many sensing, imaging and communication applications. Such materials play an important role as polarizers, filters and wave-plates in photonic devices and circuits. Conventional crystalline materials with optical anisotropy typically show unidirectional linear dichroism over a broad wavelength range. The linear dichroism conversion phenomenon has not been observed in crystalline materials. Here, we report the investigation of the unique linear dichroism conversion phenomenon in quasi-one-dimensional (quasi-1D) hexagonal perovskite chalcogenide BaTiS3. The material shows record level of optical anisotropy within the visible wavelength range. In contrast to conventional anisotropic optical materials, the linear dichroism polarity in BaTiS3 makes an orthogonal change at an optical wavelength corresponding to the photon energy of 1.78 eV. First principle calculations reveal that this anomalous linear dichroism conversion behavior originates from different selection rules of the optical transitions from the parallel bands in the BaTiS3 material. Wavelength dependent polarized Raman spectroscopy further confirms this phenomenon. Such material with linear dichroism conversion property can facilitate new ability to control and sense the energy and polarization of light, and lead to novel photonic devices such as polarization-wavelength selective detectors and lasers for multispectral imaging, sensing and optical communication applications.

cond-mat.mtrl-sci↗

arXiv2018

Extraordinary second harmonic generation in ReS2 atomic crystals

We report the observations of unexpected layer-dependent, strong, and anisotropic second harmonic generations (SHGs) in atomically thin ReS2. Appreciable (negligible) SHGs are obtained from even (odd) numbers of ReS2 layers, which is opposite to the layer-dependence of SHGs in group VI transition metal dichalcogenides, such as MoS2 and WS2. The results are analyzed from ReS2's crystal structure, implying second harmonic polarizations generated from the interlayer coupling. Pumped by a telecomband laser, SHG from the bilayer ReS2 is almost one order of magnitude larger than that from the monolayer WS2. The estimated second-order nonlinear susceptibility of 900 pm/V is remarkably high among those reported in two-dimensional materials. The laser polarization dependence of ReS2's SHG is strongly anisotropic and indicates its distorted lattice structure with more unequal and non-zero second-order susceptibility elements.

physics.optics↗

arXiv2017

Direct evidences of pentagonal silicon chains and magic clusters

Pentagon is one of the most beautiful geometric structures in nature, but it is rarely seen simply because five-fold symmetry is mathematically forbidden in a 2D or 3D periodic lattices. Fortunately, pentagon as a structural element is allowed in 1D or 0D systems, since translational symmetry is not necessary there. However, in these systems pentagons only compose a small portion of the structure. So far, 1D or 0D systems consisting of purely pentagons are still rare. Here, combing high resolution non-contact atomic force microscopy and tip-enhanced Raman spectroscopy, we have directly visualized the pentagon-ring structure in self-assembled Si nanoribbons and magic clusters on Ag(110) substrate. Moreover, chemical fingerprint of Si pentagon was detected in individual Si nanoribbon and clusters by tip-enhanced Raman spectroscopy. This work demonstrates that Si pentagon can be an important element in building silicon nanostructures, which may find potential applications in future nanoelectronics based on silicon.

cond-mat.mes-hall↗

arXiv2017

Observation of forbidden phonons and dark excitons by resonance Raman scattering in few-layer WS$_2$

The optical properties of the two-dimensional (2D) crystals are dominated by tightly bound electron-hole pairs (excitons) and lattice vibration modes (phonons). The exciton-phonon interaction is fundamentally important to understand the optical properties of 2D materials and thus help develop emerging 2D crystal based optoelectronic devices. Here, we presented the excitonic resonant Raman scattering (RRS) spectra of few-layer WS$_2$ excited by 11 lasers lines covered all of A, B and C exciton transition energies at different sample temperatures from 4 to 300 K. As a result, we are not only able to probe the forbidden phonon modes unobserved in ordinary Raman scattering, but also can determine the bright and dark state fine structures of 1s A exciton. In particular, we also observed the quantum interference between low-energy discrete phonon and exciton continuum under resonant excitation. Our works pave a way to understand the exciton-phonon coupling and many-body effects in 2D materials.

cond-mat.mtrl-sci↗

arXiv2016

Raman spectroscopic characterization of stacking configuration and interlayer coupling of twisted multilayer graphene grown by chemical vapor deposition

Multilayer graphene (MLG) grown by chemical vapor deposition (CVD) is a promising material for electronic and optoelectronic devices. Understanding the stacking configuration and interlayer coupling of MLGs is technologically relevant and of importance for the device applications. Here, we reported a kind of twisted MLGs (tMLGs), which are formed by stacking one graphene monolayer on the top of AB-stacked MLG by rotating a certain angle between them. The twist angle of tMLGs are identified by the twist-related modes, R and R'. With increasing the total layer number of N, the observed interlayer shear modes in the tMLG flake always follow those of AB-stacked (N-1)LG, while the observed interlayer breathing modes always follow those of AB-stacked NLG, independent of its twist angle. The layer breathing coupling of the tMLGs is almost identical to that of mechanically-exfoliated tMLGs, which demonstrates the high quality of MLGs grown by CVD. This study provides an applicable approach to probe the stacking configuration and interlayer coupling of MLGs grown by CVD or related methods. This work also demonstrates the possibility to grow MLG flakes with a fixed stacking configuration, $e.g.$, t(1+$n$)LG, by the CVD method.

cond-mat.mtrl-sci↗

arXiv2016

Determining layer number of two dimensional flakes of transition-metal dichalcogenides by the Raman intensity from substrate

Transition-metal dichalcogenide (TMD) semiconductors have been widely studied due to their distinctive electronic and optical properties. The property of TMD flakes is a function of its thickness, or layer number (N). How to determine N of ultrathin TMDs materials is of primary importance for fundamental study and practical applications. Raman mode intensity from substrates has been used to identify N of intrinsic and defective multilayer graphenes up to N=100. However, such analysis is not applicable for ultrathin TMD flakes due to the lack of a unified complex refractive index ($\tilde{n}$) from monolayer to bulk TMDs. Here, we discuss the N identification of TMD flakes on the SiO$_2$/Si substrate by the intensity ratio between the Si peak from 100-nm (or 89-nm) SiO$_2$/Si substrates underneath TMD flakes and that from bare SiO$_2$/Si substrates. We assume the real part of $\tilde{n}$ of TMD flakes as that of monolayer TMD and treat the imaginary part of $\tilde{n}$ as a fitting parameter to fit the experimental intensity ratio. An empirical $\tilde{n}$, namely, $\tilde{n}_{eff}$, of ultrathin MoS$_{2}$, WS$_{2}$ and WSe$_{2}$ flakes from monolayer to multilayer is obtained for typical laser excitations (2.54 eV, 2.34 eV, or 2.09 eV). The fitted $\tilde{n}_{eff}$ of MoS$_{2}$ has been used to identify N of MoS$_{2}$ flakes deposited on 302-nm SiO$_2$/Si substrate, which agrees well with that determined from their shear and layer-breathing modes. This technique by measuring Raman intensity from the substrate can be extended to identify N of ultrathin 2D flakes with N-dependent $\tilde{n}$ . For the application purpose, the intensity ratio excited by specific laser excitations has been provided for MoS$_{2}$, WS$_{2}$ and WSe$_{2}$ flakes and multilayer graphene flakes deposited on Si substrates covered by 80-110 nm or 280-310 nm SiO$_2$ layer.

cond-mat.mtrl-sci↗

arXiv2016

Interface coupling in twisted multilayer graphene by resonant Raman spectroscopy of layer breathing modes

Raman spectroscopy is the prime non-destructive characterization tool for graphene and related layered materials. The shear (C) and layer breathing modes (LBMs) are due to relative motions of the planes, either perpendicular or parallel to their normal. This allows one to directly probe the interlayer interactions in multilayer samples. Graphene and other two-dimensional (2d) crystals can be combined to form various hybrids and heterostructures, creating materials on demand with properties determined by the interlayer interaction. This is the case even for a single material, where multilayer stacks with different relative orientation have different optical and electronic properties. In twisted multilayer graphene samples there is a significant enhancement of the C modes due to resonance with new optically allowed electronic transitions, determined by the relative orientation of the layers. Here we show that this applies also to the LBMs, that can be now directly measured at room temperature. We find that twisting does not affect LBMs, quite different from the case of the C modes. This implies that the periodicity mismatch between two twisted layers mostly affects shear interactions. Our work shows that Raman spectroscopy is an ideal tool to uncover the interface coupling of 2d hybrids and heterostructures.

cond-mat.mtrl-sci↗

arXiv2015

Polytypism and Unexpected Strong Interlayer Coupling of two-Dimensional Layered ReS2

The anisotropic two-dimensional (2D) van der Waals (vdW) layered materials, with both scientific interest and potential application, have one more dimension to tune the properties than the isotropic 2D materials. The interlayer vdW coupling determines the properties of 2D multi-layer materials by varying stacking orders. As an important representative anisotropic 2D materials, multilayer rhenium disulfide (ReS2) was expected to be random stacking and lack of interlayer coupling. Here, we demonstrate two stable stacking orders (aa and a-b) of N layer (NL, N>1) ReS2 from ultralow-frequency and high-frequency Raman spectroscopy, photoluminescence spectroscopy and first-principles density functional theory calculation. Two interlayer shear modes are observed in aa-stacked NL-ReS2 while only one interlayer shear mode appears in a-b-stacked NL-ReS2, suggesting anisotropic-like and isotropic-like stacking orders in aa- and a-b-stacked NL-ReS2, respectively. The frequency of the interlayer shear and breathing modes reveals unexpected strong interlayer coupling in aa- and a-b-NL-ReS2, the force constants of which are 55-90% to those of multilayer MoS2. The observation of strong interlayer coupling and polytypism in multi-layer ReS2 stimulate future studies on the structure, electronic and optical properties of other 2D anisotropic materials.

cond-mat.mtrl-sci↗

arXiv2015

Monolayer Molybdenum Disulfide Nanoribbons with High Optical Anisotropy

Two-dimensional Molybdenum Disulfide (MoS2) has shown promising prospects for the next generation electronics and optoelectronics devices. The monolayer MoS2 can be patterned into quasi-one-dimensional anisotropic MoS2 nanoribbons (MNRs), in which theoretical calculations have predicted novel properties. However, little work has been carried out in the experimental exploration of MNRs with a width of less than 20 nm where the geometrical confinement can lead to interesting phenomenon. Here, we prepared MNRs with width between 5 nm to 15 nm by direct helium ion beam milling. High optical anisotropy of these MNRs is revealed by the systematic study of optical contrast and Raman spectroscopy. The Raman modes in MNRs show strong polarization dependence. Besides that the E' and A'1 peaks are broadened by the phonon-confinement effect, the modes corresponding to singularities of vibrational density of states are activated by edges. The peculiar polarization behavior of Raman modes can be explained by the anisotropy of light absorption in MNRs, which is evidenced by the polarized optical contrast. The study opens the possibility to explore quasione-dimensional materials with high optical anisotropy from isotropic 2D family of transition metal dichalcogenides.

cond-mat.mtrl-sci↗

arXiv2015

Substrate-free layer-number identification of two-dimensional materials: A case of Mo$_{0.5}$W$_{0.5}$S$_2$ alloy

Any of two or more two-dimensional (2D) materials with similar properties can be alloyed into a new layered material, namely, 2D alloy. Individual monolayer in 2D alloys are kept together by Van der Waals interactions. The property of multilayer alloys is a function of their layer number. Here, we studied the shear (C) and layer-breathing (LB) modes of Mo$_{0.5}$W$_{0.5}$S$_2$ alloy flakes and their link to the layer number of alloy flakes. The study reveals that the disorder effect is absent in the C and LB modes of 2D alloys, and the monatomic chain model can be used to estimate the frequencies of the C and LB modes. We demonstrated how to use the C and LB mode frequency to identify the layer number of alloy flakes deposited on different substrates. This technique is independent of the substrate, stoichiometry, monolayer thickness and complex refractive index of 2D materials, offering a robust and substrate-free approach for layer-number identification of 2D materials.

cond-mat.mtrl-sci↗

arXiv2015

Interlayer Interactions in Anisotropic Atomically-thin Rhenium Diselenide

Recently, two-dimensional (2D) materials with strong in-plane anisotropic properties such as black phosphorus have demonstrated great potential for developing new devices that can take advantage of its reduced lattice symmetry with potential applications in electronics, optoelectronics and thermoelectrics. However, the selection of 2D material with strong in-plane anisotropy has so far been very limited and only sporadic studies have been devoted to transition metal dichalcogenides (TMDC) materials with reduced lattice symmetry, which is yet to convey the full picture of their optical and phonon properties, and the anisotropy in their interlayer interactions. Here, we study the anisotropic interlayer interactions in an important TMDC 2D material with reduced in-plane symmetry - atomically thin rhenium diselenide (ReSe2) - by investigating its ultralow frequency interlayer phonon vibration modes, the layer dependent optical bandgap, and the anisotropic photoluminescence (PL) spectra for the first time. The ultralow frequency interlayer Raman spectra combined with the first study of polarization-resolved high frequency Raman spectra in mono- and bi-layer ReSe2 allows deterministic identification of its layer number and crystal orientation. PL measurements show anisotropic optical emission intensity with bandgap increasing from 1.26 eV in the bulk to 1.32 eV in monolayer, consistent with the theoretical results based on first-principle calculations. The study of the layer-number dependence of the Raman modes and the PL spectra reveals the relatively weak van der Waals interaction and 2D quantum confinement in atomically-thin ReSe2.

cond-mat.mes-hall↗