arXiv subjects

Placido Mursia

Publications and source records attributed to Placido Mursia.

18 recordsLinked to original sources

arXiv2025

Realistic Evaluation of Impedance-Based RIS Modeling: Practical Insights and Applications

Reconfigurable Intelligent Surfaces (RISs) have emerged as a promising technology for next-generation wireless communications, offering energy-efficient control of electromagnetic (EM) waves. While conventional RIS models based on phase shifts and amplitude adjustments have been widely studied, they overlook complex EM phenomena such as mutual coupling, which are crucial for advanced wave manipulations. Recent efforts in EM-consistent modelling have provided more accurate representations of RIS behavior, highlighting challenges like structural scattering-an unwanted signal reflection that can lead to interference. In this paper, we analyze the impact of structural scattering in RIS architectures and compare traditional and EM-consistent models through full-wave simulations, thus providing practical insights on the realistic performance of current RIS designs. Our findings reveal the limitations of current modelling approaches in mitigating this issue, underscoring the need for new optimization strategies.

cs.IT↗

arXiv2025

AI-Assisted NLOS Sensing for RIS-Based Indoor Localization in Smart Factories

In the era of Industry 4.0, precise indoor localization is vital for automation and efficiency in smart factories. Reconfigurable Intelligent Surfaces (RIS) are emerging as key enablers in 6G networks for joint sensing and communication. However, RIS faces significant challenges in Non-Line-of-Sight (NLOS) and multipath propagation, particularly in localization scenarios, where detecting NLOS conditions is crucial for ensuring not only reliable results and increased connectivity but also the safety of smart factory personnel. This study introduces an AI-assisted framework employing a Convolutional Neural Network (CNN) customized for accurate Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) classification to enhance RIS-based localization using measured, synthetic, mixed-measured, and mixed-synthetic experimental data, that is, original, augmented, slightly noisy, and highly noisy data, respectively. Validated through such data from three different environments, the proposed customized-CNN (cCNN) model achieves {95.0\%-99.0\%} accuracy, outperforming standard pre-trained models like Visual Geometry Group 16 (VGG-16) with an accuracy of {85.5\%-88.0\%}. By addressing RIS limitations in NLOS scenarios, this framework offers scalable and high-precision localization solutions for 6G-enabled smart factories.

eess.SP↗

arXiv2025

Distributed Intelligent Sensing and Communications for 6G: Architecture and Use Cases

The Distributed Intelligent Sensing and Communication (DISAC) framework redefines Integrated Sensing and Communication (ISAC) for 6G by leveraging distributed architectures to enhance scalability, adaptability, and resource efficiency. This paper presents key architectural enablers, including advanced data representation, seamless target handover, support for heterogeneous devices, and semantic integration. Two use cases illustrate the transformative potential of DISAC: smart factory shop floors and Vulnerable Road User (VRU) protection at smart intersections. These scenarios demonstrate significant improvements in precision, safety, and operational efficiency compared to traditional ISAC systems. The preliminary DISAC architecture incorporates intelligent data processing, distributed coordination, and emerging technologies such as Reconfigurable Intelligent Surfaces (RIS) to meet 6G's stringent requirements. By addressing critical challenges in sensing accuracy, latency, and real-time decision-making, DISAC positions itself as a cornerstone for next-generation wireless networks, advancing innovation in dynamic and complex environments.

eess.SP↗

arXiv2025

Degrees of Freedom of Holographic MIMO -- Fundamental Theory and Analytical Methods

Holographic multiple-input multiple-output (MIMO) is envisioned as one of the most promising technology enablers for future sixth-generation (6G) networks. The use of electrically large holographic surface (HoloS) antennas has the potential to significantly boost the spatial multiplexing gain by increasing the number of degrees of freedom (DoF), even in line-of-sight (LoS) channels. In this context, the research community has shown a growing interest in characterizing the fundamental limits of this technology. In this paper, we compare the two analytical methods commonly utilized in the literature for this purpose: the cut-set integral and the self-adjoint operator. We provide a detailed description of both methods and discuss their advantages and limitations.

cs.IT↗

arXiv2024

Spatial Multiplexing in Near-Field Line-of-Sight MIMO Communications: Paraxial and Non-Paraxial Deployments

Sixth generation (6G) wireless networks are envisioned to include aspects of energy footprint reduction (sustainability), besides those of network capacity and connectivity, at the design stage. This paradigm change requires radically new physical layer technologies. Notably, the integration of large-aperture arrays and the transmission over high frequency bands, such as the sub-terahertz spectrum, are two promising options. In many communication scenarios of practical interest, the use of large antenna arrays in the sub-terahertz frequency range often results in short-range transmission distances that are characterized by line-of-sight channels, in which pairs of transmitters and receivers are located in the (radiating) near field of one another. These features make the traditional designs, based on the far-field approximation, for multiple-input multiple-output (MIMO) systems sub-optimal in terms of spatial multiplexing gains. To overcome these limitations, new designs for MIMO systems are required, which account for the spherical wavefront that characterizes the electromagnetic waves in the near field, in order to ensure the highest spatial multiplexing gain without increasing the power expenditure. In this paper, we introduce an analytical framework for optimizing the deployment of antenna arrays in line-of-sight channels, which can be applied to paraxial and non-paraxial network deployments. In the paraxial setting, we devise a simpler analytical framework, which, compared to those available in the literature, provides explicit information about the impact of key design parameters. In the non-paraxial setting, we introduce a novel analytical framework that allows us to identify a set of sufficient conditions to be fulfilled for achieving the highest spatial multiplexing gain. The proposed designs are validated with numerical simulations.

cs.IT↗

arXiv2024

T3DRIS: Advancing Conformal RIS Design through In-depth Analysis of Mutual Coupling Effects

This paper presents a theoretical and mathematical framework for the design of a conformal reconfigurable intelligent surface (RIS) that adapts to non-planar geometries, which is a critical advancement for the deployment of RIS on non-planar and irregular surfaces as envisioned in smart radio environments. Previous research focused mainly on the optimization of RISs assuming a predetermined shape, while neglecting the intricate interplay between shape optimization, phase optimization, and mutual coupling effects. Our contribution, the T3DRIS framework, addresses this fundamental problem by integrating the configuration and shape optimization of RISs into a unified model and design framework, thus facilitating the application of RIS technology to a wider spectrum of environmental objects. The mathematical core of T3DRIS is rooted in optimizing the 3D deployment of the unit cells and tuning circuits, aiming at maximizing the communication performance. Through rigorous full-wave simulations and a comprehensive set of numerical analyses, we validate the proposed approach and demonstrate its superior performance and applicability over contemporary designs. This study-the first of its kind-paves the way for a new direction in RIS research, emphasizing the importance of a theoretical and mathematical perspective in tackling the challenges of conformal RISs.

cs.IT↗

arXiv2024

Distributed Intelligent Integrated Sensing and Communications: The 6G-DISAC Approach

This paper introduces the concept of Distributed Intelligent integrated Sensing and Communications (DISAC), which expands the capabilities of Integrated Sensing and Communications (ISAC) towards distributed architectures. Additionally, the DISAC framework integrates novel waveform design with new semantic and goal-oriented communication paradigms, enabling ISAC technologies to transition from traditional data fusion to the semantic composition of diverse sensed and shared information. This progress facilitates large-scale, energy-efficient support for high-precision spatial-temporal processing, optimizing ISAC resource utilization, and enabling effective multi-modal sensing performance. Addressing key challenges such as efficient data management and connect-compute resource utilization, 6G- DISAC stands to revolutionize applications in diverse sectors including transportation, healthcare, and industrial automation. Our study encapsulates the project vision, methodologies, and potential impact, marking a significant stride towards a more connected and intelligent world.

eess.SP↗

arXiv2023

Empirical Validation of the Impedance-Based RIS Channel Model in an Indoor Scattering Environment

Ensuring the precision of channel modeling plays a pivotal role in the development of wireless communication systems, and this requirement remains a persistent challenge within the realm of networks supported by Reconfigurable Intelligent Surfaces (RIS). Achieving a comprehensive and reliable understanding of channel behavior in RIS-aided networks is an ongoing and complex issue that demands further exploration. In this paper, we empirically validate a recently-proposed impedance-based RIS channel model that accounts for the mutual coupling at the antenna array and precisely models the presence of scattering objects within the environment as a discrete array of loaded dipoles. To this end, we exploit real-life channel measurements collected in an office environment to demonstrate the validity of such a model and its applicability in a practical scenario. Finally, we provide numerical results demonstrating that designing the RIS configuration based upon such model leads to superior performance as compared to reference schemes.

cs.IT↗

arXiv2023

SARIS: Scattering Aware Reconfigurable Intelligent Surface model and Optimization for Complex Propagation Channels

The reconfigurable intelligent surface (RIS) is an emerging technology that changes how wireless networks are perceived, therefore its potential benefits and applications are currently under intense research and investigation. In this letter, we focus on electromagnetically consistent models for RISs inheriting from a recently proposed model based on mutually coupled loaded wire dipoles. While existing related research focuses on free-space wireless channels thereby ignoring interactions between RIS and scattering objects present in the propagation environment, we introduce an RIS-aided channel model that is applicable to more realistic scenarios, where the scattering objects are modeled as loaded wire dipoles. By adjusting the parameters of the wire dipoles, the properties of general natural and engineered material objects can be modeled. Based on this model, we introduce a provably convergent and efficient iterative algorithm that jointly optimizes the RIS and transmitter configurations to maximize the system sum-rate. Extensive numerical results show the net performance improvement provided by the proposed method compared with existing optimization algorithms.

cs.IT↗

arXiv2023

RIS-Enabled Smart Wireless Environments: Deployment Scenarios, Network Architecture, Bandwidth and Area of Influence

Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enabled smart wireless environments that have been recently designed within the ongoing European Union Horizon 2020 RISE-6G project, as well as a network architecture integrating RISs with existing standardized interfaces. We identify various RIS deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and respective capabilities. Furthermore, we introduce and discuss, with the aid of simulations and reflectarray measurements, two novel metrics that emerge in the context of RIS-empowered wireless systems: the RIS bandwidth and area of influence. Their extensive investigation corroborates the need for careful deployment and planning of the RIS technology in future networks.

cs.IT↗

arXiv2022

Designing, Building, and Characterizing RF Switch-based Reconfigurable Intelligent Surfaces

In this paper, we present our experience designing, prototyping, and empirically characterizing RF Switch-based Reconfigurable Intelligent Surfaces (RIS). Our RIS design comprises arrays of patch antennas, delay lines and programmable radio-frequency (RF) switches that enable passive 3D beamforming, i.e., without active RF components. We implement this design using PCB technology and low-cost electronic components, and thoroughly validate our prototype in a controlled environment with high spatial resolution codebooks. Finally, we make available a large dataset with a complete characterization of our RIS and present the costs associated with reproducing our design.

eess.SY↗

arXiv2022

Taming Aerial Communication with Flight-assisted Smart Surfaces in 6G Era

Aerial communication is gradually taking an assertive role within common societal behaviors by means of unmanned aerial vehicles (UAVs), high-altitude platforms (HAPs), and fixed-wing aircrafts (FWAs). Such devices can assist general operations in a diverse set of heterogeneous applications, such as video-surveillance, remote delivery and connectivity provisioning in crowded events and emergency scenarios. Given their increasingly higher technology penetration rate, telco operators started looking at the sky as a new potential direction to enable a three-dimensional (3D) communication paradigm. However, designing flying mobile stations involves addressing a daunting number of challenges, such as an excessive on-board control overhead, variable battery drain and advanced antenna design. To this end, the newly-born Smart Surfaces technology may come to help: reconfigurable intelligent surfaces (RIS) may be flexibly installed on-board to control the terrestrial propagation environment from an elevated viewpoint by involving low-complex and battery-limited solutions. In this paper, we shed light on novel RIS-based use-cases, corresponding requirements, and potential solutions that might be adopted in future aerial communication infrastructures.

cs.IT↗

arXiv2022

Enforcing Statistical Orthogonality in Massive MIMO Systems via Covariance Shaping

This paper tackles the problem of downlink data transmission in massive multiple-input multiple-output (MIMO) systems where user equipments (UEs) exhibit high spatial correlation and channel estimation is limited by strong pilot contamination. Signal subspace separation among UEs is, in fact, rarely realized in practice and is generally beyond the control of the network designer (as it is dictated by the physical scattering environment). In this context, we propose a novel statistical beamforming technique, referred to as MIMO covariance shaping, that exploits multiple antennas at the UEs and leverages the realistic non-Kronecker structure of massive MIMO channels to target a suitable shaping of the channel statistics performed at the UE-side. To optimize the covariance shaping strategies, we propose a low-complexity block coordinate descent algorithm that is proved to converge to a limit point of the original nonconvex problem. For the two-UE case, this is shown to converge to a stationary point of the original problem. Numerical results illustrate the sum-rate performance gains of the proposed method with respect to spatial multiplexing in scenarios where the spatial selectivity of the base station is not sufficient to separate closely spaced UEs.

cs.IT↗

arXiv2022

A Frequency-Agnostic RIS-based solution to control the Smart Radio Propagation Environment

The disruptive reconfigurable intelligent surface (RIS) technology is steadily gaining relevance as a key element in future 6G networks. However, a one-size-fits-all RIS hardware design is yet to be defined due to many practical considerations. A major roadblock for currently available RISs is their inability to concurrently operate at multiple carrier frequencies, which would lead to redundant installations to support multiple radio access technologies (RATs). In this paper, we introduce FABRIS, a novel and practical multi-frequency RIS design. FABRIS is able to dynamically operate across different radio frequencies (RFs) by means of frequency-tunable antennas as unit cells with virtually no performance degradation when conventional approaches to RIS design and optimization fail. Remarkably, our design preserves a sufficiently narrow beamwidth as to avoid generating signal leakage in unwanted directions and a sufficiently high antenna efficiency in terms of scattering parameters. Indeed, FABRIS selects the RIS configuration that maximizes the signal at the intended target user equipment (UE) while minimizing leakage to non-intended neighboring UEs. Numerical results and full-wave simulations validate our proposed approach against a naive implementation that does not consider signal leakage resulting from multi-frequency antenna arrays.

cs.NI↗

arXiv2022

PAPIR: Practical RIS-aided Localization via Statistical User Information

The integration of advanced localization techniques in the upcoming next generation networks (B5G/6G) is becoming increasingly important for many use cases comprising contact tracing, natural disasters, terrorist attacks, etc. Therefore, emerging lightweight and passive technologies that allow accurately controlling the propagation environment, such as reconfigurable intelligent surfaces (RISs), may help to develop advance positioning solutions relying on channel statistics and beamforming. In this paper, we devise PAPIR, a practical localization system leveraging on RISs by designing a two-stage solution building upon prior statistical information on the target user equipment (UE) position. PAPIR aims at finely estimating the UE position by performing statistical beamforming, direction-of-arrival (DoA) and time-of-arrival (ToA) estimation on a given three-dimensional search space, which is iteratively updated by exploiting the likelihood of the UE position.

cs.NI↗

arXiv2021

RISe of Flight: RIS-Empowered UAV Communications for Robust and Reliable Air-to-Ground Networks

Next generation mobile networks need to expand towards uncharted territories in order to enable the digital transformation of society. In this context, aerial devices such as unmanned aerial vehicles (UAVs) are expected to address this gap in hard-to-reach locations. However, limited battery-life is an obstacle for the successful spread of such solutions. Reconfigurable intelligent surfaces (RISs) represent a promising solution addressing this challenge since on-board passive and lightweight controllable devices can efficiently reflect the signal propagation from the ground BSs towards specific target areas. In this paper, we focus on air-to-ground networks where UAVs equipped with RIS can fly over selected areas to provide connectivity. In particular, we study how to optimally compensate flight effects and propose RiFe as well as its practical implementation Fair-RiFe that automatically configure RIS parameters accounting for undesired UAV oscillations due to adverse atmospheric conditions. Our results show that both algorithms provide robustness and reliability while outperforming state-of-the-art solutions in the multiple conditions studied.

cs.IT↗

arXiv2021

D2D-Aided Multi-Antenna Multicasting under Generalized CSIT

Multicasting, where a base station (BS) wishes to convey the same message to several user equipments (UEs), represents a common yet highly challenging wireless scenario. In fact, guaranteeing decodability by the whole UE population proves to be a major performance bottleneck since the UEs in poor channel conditions ultimately determine the achievable rate. To overcome this issue, two-phase cooperative multicasting schemes, which use conventional multicasting in a first phase and leverage device-to-device (D2D) communications in a second phase to effectively spread the message, have been extensively studied. However, most works are limited either to the simple case of single-antenna BS or to a specific channel state information at the transmitter (CSIT) setup. This paper proposes a general two-phase framework that is applicable to the cases of perfect, statistical, and topological CSIT in the presence of multiple antennas at the BS. The proposed method exploits the precoding capabilities at the BS, which enable targeting specific UEs that can effectively serve as D2D relays towards the remaining UEs, and maximize the multicast rate under some outage constraint. Numerical results show that our schemes bring substantial gains over traditional single-phase multicasting and overcome the worst-UE bottleneck behavior in all the considered CSIT configurations.

cs.IT↗

arXiv2019

D2D-Aided Multi-Antenna Multicasting

Multicast services, whereby a common valuable message needs to reach a whole population of user equipments (UEs), are gaining attention on account of new applications such as vehicular networks. As it proves challenging to guarantee decodability by every UE in a large population, service reliability is indeed the Achilles' heel of multicast transmissions. To circumvent this problem, a two-phase protocol capitalizing on device-to-device (D2D) links between UEs has been proposed, which overcomes the vanishing behavior of the multicast rate. In this paper, we revisit such D2D-aided protocol in the new light of precoding capabilities at the base station (BS). We obtain an enhanced scheme that aims at selecting a subset of UEs who cooperate to spread the common message across the rest of the network via D2D retransmissions. With the objective of maximizing the multicast rate under some outage constraint, we propose an algorithm with provable convergence that jointly identifies the most pertinent relaying UEs and optimizes the precoding strategy at the BS.

eess.SP↗