Searcharxiv⌕ Search

arXiv subjects

Polychronis Patapis

Publications and source records attributed to Polychronis Patapis.

30 records · Page 2Linked to original sources

CROCODILE \\ Incorporating medium-resolution spectroscopy of close-in directly imaged exoplanets into atmospheric retrievals via cross-correlation

The investigation of the atmospheres of closely separated, directly imaged gas giant exoplanets is challenging due to the presence of stellar speckles that pollute their spectrum. To remedy this, the analysis of medium- to high-resolution spectroscopic data via cross-correlation with spectral templates (cross-correlation spectroscopy) is emerging as a leading technique. We aim to define a robust Bayesian framework combining, for the first time, three widespread direct-imaging techniques, namely photometry, low-resolution spectroscopy, and medium-resolution cross-correlation spectroscopy in order to derive the atmospheric properties of close-in directly imaged exoplanets. Our framework CROCODILE (cross-correlation retrievals of directly imaged self-luminous exoplanets) naturally combines the three techniques by adopting adequate likelihood functions. To validate our routine, we simulated observations of gas giants similar to the well-studied $β$~Pictoris~b planet and we explored the parameter space of their atmospheres to search for potential biases. We obtain more accurate measurements of atmospheric properties when combining photometry, low- and medium-resolution spectroscopy into atmospheric retrievals than when using the techniques separately as is usually done in the literature. We find that medium-resolution ($R \approx 4000$) K-band cross-correlation spectroscopy alone is not suitable to constrain the atmospheric properties of our synthetic datasets; however, this problem disappears when simultaneously fitting photometry and low-resolution ($R \approx 60$) spectroscopy between the Y and M bands. Our framework allows the atmospheric characterisation of directly imaged exoplanets using the high-quality spectral data that will be provided by the new generation of instruments such as VLT/ERIS, JWST/MIRI, and ELT/METIS.

astro-ph.EP↗

JWST MIRI flight performance: The Medium-Resolution Spectrometer

The Medium-Resolution Spectrometer (MRS) provides one of the four operating modes of the Mid-Infrared Instrument (MIRI) on board the James Webb Space Telescope (JWST). The MRS is an integral field spectrometer, measuring the spatial and spectral distributions of light across the 5-28 $μm$ wavelength range with a spectral resolving power between 3700-1300. We present the MRS's optical, spectral, and spectro-photometric performance, as achieved in flight, and we report on the effects that limit the instrument's ultimate sensitivity. The MRS flight performance has been quantified using observations of stars, planetary nebulae, and planets in our Solar System. The precision and accuracy of this calibration was checked against celestial calibrators with well-known flux levels and spectral features. We find that the MRS geometric calibration has a distortion solution accuracy relative to the commanded position of 8 mas at 5 $μm$ and 23 mas at 28 $μm$. The wavelength calibration is accurate to within 9 km/sec at 5 $μm$ and 27 km/sec at 28 $μm$. The uncertainty in the absolute spectro-photometric calibration accuracy was estimated at 5.6 +- 0.7 %. The MIRI calibration pipeline is able to suppress the amplitude of spectral fringes to below 1.5 % for both extended and point sources across the entire wavelength range. The MRS point spread function (PSF) is 60 % broader than the diffraction limit along its long axis at 5 $μm$ and is 15 % broader at 28 $μm$. The MRS flight performance is found to be better than prelaunch expectations. The MRS is one of the most subscribed observing modes of JWST and is yielding many high-profile publications. It is currently humanity's most powerful instrument for measuring the mid-infrared spectra of celestial sources and is expected to continue as such for many years to come.

astro-ph.IM↗

A 3D Drizzle Algorithm for JWST and Practical Application to the MIRI Medium Resolution Spectrometer

We describe an algorithm for application of the classic `drizzle' technique to produce 3d spectral cubes using data obtained from the slicer-type integral field unit (IFU) spectrometers on board the James Webb Space Telescope. This algorithm relies upon the computation of overlapping volume elements (composed of two spatial dimensions and one spectral dimension) between the 2d detector pixels and the 3d data cube voxels, and is greatly simplified by treating the spatial and spectral overlaps separately at the cost of just 0.03% in spectrophotometric fidelity. We provide a matrix-based formalism for the computation of spectral radiance, variance, and covariance from arbitrarily dithered data and comment on the performance of this algorithm for the Mid-Infrared Instrument's Medium Resolution IFU Spectrometer (MIRI MRS). We derive a series of simplified scaling relations to account for covariance between cube spaxels in spectra extracted from such cubes, finding multiplicative factors ranging from 1.5 to 3 depending on the wavelength range and kind of data cubes produced. Finally, we discuss how undersampling produces periodic amplitude modulations in the extracted spectra in addition to those naturally produced by fringing within the instrument; reducing such undersampling artifacts below 1% requires a 4-point dithering strategy and spectral extraction radii of 1.5 times the PSF FWHM or greater.

astro-ph.IM↗

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems I: High Contrast Imaging of the Exoplanet HIP 65426 b from 2-16 $μ$m

We present JWST Early Release Science (ERS) coronagraphic observations of the super-Jupiter exoplanet, HIP 65426 b, with the Near-Infrared Camera (NIRCam) from 2-5 $μ$m, and with the Mid-Infrared Instrument (MIRI) from 11-16 $μ$m. At a separation of $\sim$0.82" (86$^{+116}_{-31}$ au), HIP 65426 b is clearly detected in all seven of our observational filters, representing the first images of an exoplanet to be obtained by JWST, and the first ever direct detection of an exoplanet beyond 5 $μ$m. These observations demonstrate that JWST is exceeding its nominal predicted performance by up to a factor of 10, depending on separation and subtraction method, with measured 5$σ$ contrast limits of $\sim$1$\times10^{-5}$ and $\sim$2$\times10^{-4}$ at 1" for NIRCam at 4.4 $μ$m and MIRI at 11.3 $μ$m, respectively. These contrast limits provide sensitivity to sub-Jupiter companions with masses as low as 0.3$M_\mathrm{Jup}$ beyond separations of $\sim$100 au. Together with existing ground-based near-infrared data, the JWST photometry are well fit by a BT-SETTL atmospheric model from 1-16 $μ$m, and span $\sim$97% of HIP 65426 b's luminous range. Independent of the choice of model atmosphere we measure an empirical bolometric luminosity that is tightly constrained between $\mathrm{log}\!\left(L_\mathrm{bol}/L_{\odot}\right)$=-4.31 to $-$4.14, which in turn provides a robust mass constraint of 7.1$\pm$1.2 $M_\mathrm{Jup}$. In totality, these observations confirm that JWST presents a powerful and exciting opportunity to characterise the population of exoplanets amenable to high-contrast imaging in greater detail.

astro-ph.EP↗

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems: Best Practices for Data Collection in Cycle 2 and Beyond

We present a set of recommended best practices for JWST data collection for members of the community focussed on the direct imaging and spectroscopy of exoplanetary systems. These findings and recommendations are based on the early analysis of the JWST Early Release Science Program 1386, "High-Contrast Imaging of Exoplanets and Exoplanetary Systems with JWST." Our goal is for this information to be useful for observers in preparation of JWST proposals for Cycle 2 and beyond. In addition to compiling a set of best practices from our ERS program, in a few cases we also draw on the expertise gained within the instrument commissioning programs, as well as include a handful of data processing best practices. We anticipate that this document will be regularly updated and resubmitted to arXiv.org to ensure that we have distributed our knowledge of best-practices for data collection as widely and efficiently as possible.

astro-ph.IM↗

The JWST Early Release Science Program for the Direct Imaging & Spectroscopy of Exoplanetary Systems

The direct characterization of exoplanetary systems with high contrast imaging is among the highest priorities for the broader exoplanet community. As large space missions will be necessary for detecting and characterizing exo-Earth twins, developing the techniques and technology for direct imaging of exoplanets is a driving focus for the community. For the first time, JWST will directly observe extrasolar planets at mid-infrared wavelengths beyond 5$μ$m, deliver detailed spectroscopy revealing much more precise chemical abundances and atmospheric conditions, and provide sensitivity to analogs of our solar system ice-giant planets at wide orbital separations, an entirely new class of exoplanet. However, in order to maximise the scientific output over the lifetime of the mission, an exquisite understanding of the instrumental performance of JWST is needed as early in the mission as possible. In this paper, we describe our 55-hour Early Release Science Program that will utilize all four JWST instruments to extend the characterisation of planetary mass companions to $\sim$15$μ$m as well as image a circumstellar disk in the mid-infrared with unprecedented sensitivity. Our program will also assess the performance of the observatory in the key modes expected to be commonly used for exoplanet direct imaging and spectroscopy, optimize data calibration and processing, and generate representative datasets that will enable a broad user base to effectively plan for general observing programs in future cycles.

astro-ph.EP↗

SLM-based Active Focal-Plane Coronagraphy: Status and future on-sky prospects

We recently started to investigate how liquid-crystal on silicon (LCOS) spatial light modulator (SLM) would perform as programmable focal-plane phase mask (FPM) coronagraphs. Such "adaptive coronagraphs" could potentially help adapt to observing conditions, but also tackle specific science cases (e.g. binary stars). Active FPMs may play a role in the context of segmented telescope pupils, or to implement synchronous coherent differential imaging (CDI). We present a status update on this work, notably early broadband contrast performance results using our new Swiss Wideband Active Testbed for High-contrast imaging (SWATCHi) facility. Finally, we unveil the upcoming near-infrared PLACID instrument, the Programmable Liquid-crystal Adaptive Coronagraphic Imager for the 4-m DAG observatory in Turkey, with a first light planned for the end of the year 2022.

astro-ph.IM↗

The nature of point source fringes in mid-infrared spectra acquired with the James Webb Space Telescope

The constructive and destructive interference in different layers of the James Webb Space Telescope (JWST) Mid-Infrared Instrument (MIRI) detector arrays modulate the detected signal as a function of wavelength. Additionally, sources of different spatial profiles show different fringe patterns. Dividing by a static fringe flat could hamper the scientific interpretation of sources whose fringes do not match that of the fringe flat. We find point source fringes measured by the MIRI Medium-Resolution Spectrometer (MRS) to be reproducible under similar observing conditions. We want, thus, to identify the variables, if they exist, that would allow for a parametrization of the signal variations induced by point source fringe modulations. We do this by analyzing MRS detector plane images acquired on the ground. We extracted the fringe profile of multiple point source observations and studied the amplitude and phase of the fringes as a function of field position and pixel sampling of the point spread function of the optical chain. A systematic variation in the amplitude and phase of the point source fringes is found over the wavelength range covered by the test sources (4.9-5.8 $μ$m). The variation depends on the fraction of the point spread function seen by the detector pixel. We identify the non-uniform pixel illumination as the root cause of the reported systematic variation. We report an improvement after correction of 50% on the 1$σ$ standard deviation of the spectral continuum. A 50% improvement is also reported in line sensitivity for a benchmark test with a spectral continuum of 100 mJy. The improvement in the shape of weak lines is illustrated using a T Tauri model spectrum. Consequently, we verify that fringes of extended sources and potentially semi-extended sources and crowded fields can be simulated by combining multiple point source fringe transmissions.

astro-ph.IM↗

The Fast Atmospheric Self-Coherent Camera Technique: Laboratory Results and Future Directions

Direct detection and detailed characterization of exoplanets using extreme adaptive optics (ExAO) is a key science goal of future extremely large telescopes (ELTs). However, wavefront errors will limit the sensitivity of this endeavor. Limitations for ground-based telescopes arise from both quasi-static and residual AO-corrected atmospheric wavefront errors, the latter of which generates short-lived aberrations that will average into a halo over a long exposure. We have developed and tested the framework for a solution to both of these problems using the self-coherent camera (SCC), to be applied to ground-based telescopes, called the Fast Atmospheric SCC Technique (FAST). In this paper we present updates of new and ongoing work for FAST, both in numerical simulation and in the laboratory. We first present numerical simulations that illustrate the scientific potential of FAST, including, with current 10-m telescopes, the direct detection of exoplanets reflected light and exo-Jupiters in thermal emission and, with future ELTs, the detection of habitable exoplanets. In the laboratory, we present the first characterizations of our proposed, and now fabricated, coronagraphic masks.

astro-ph.IM↗

A simple optimized amplitude pupil mask for attempting to direct imaging of Proxima b with SPHERE/ZIMPOL at VLT

Proxima b is a terrestrial exoplanet orbiting in the habitable zone of our closest star Proxima Centauri. The separation between the planet and the star is about 40 mas and this is with current instruments only reachable with direct imaging, using a visual extreme AO system like SPHERE/ZIMPOL. Unfortunately, the planet falls under the first airy ring at 2$λ$/D in the I band, which degrades achievable contrast. We present the design, optical simulations and testing of an amplitude pupil mask for ZIMPOL that reshapes the PSF, increasing the contrast at $r = 2λ$/D about an order of magnitude. The simple mask can be inserted directly into the current setup of SPHERE.

astro-ph.IM↗

SLM-based Digital Adaptive Coronagraphy: Current Status and Capabilities

Active coronagraphy is deemed to play a key role for the next generation of high-contrast instruments, notably in order to deal with large segmented mirrors that might exhibit time-dependent pupil merit function, caused by missing or defective segments. To this purpose, we recently introduced a new technological framework called digital adaptive coronagraphy (DAC), making use of liquid-crystal spatial light modulators (SLMs) display panels operating as active focal-plane phase mask coronagraphs. Here, we first review the latest contrast performance, measured in laboratory conditions with monochromatic visible light, and describe a few potential pathways to improve SLM coronagraphic nulling in the future. We then unveil a few unique capabilities of SLM-based DAC that were recently, or are currently in the process of being, demonstrated in our laboratory, including NCPA wavefront sensing, aperture-matched adaptive phase masks, coronagraphic nulling of multiple star systems, and coherent differential imaging (CDI).

astro-ph.IM↗

ERIS: revitalising an adaptive optics instrument for the VLT

ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.

astro-ph.IM↗