arXiv subjects

Pradip Gatkine

Publications and source records attributed to Pradip Gatkine.

At least 19 recordsLinked to original sources

arXiv2026

Simulation and development of astrophotonic H-band nulling beam combiner for the CHARA Array

Nulling interferometry is a promising method for direct detection and characterization of faint stellar companions such as exoplanets and faint binary sources. The dominant constraint on instrument performance is instability noise from vibrations, thermal expansions, and other systematic sources. Photonic instruments have footprints of a few centimeters and enable advanced light control architectures. Astrophotonic implementations can include active phase control via Mach-Zehnder interferometers (MZIs) to actively minimize residual optical path errors at the location of beam combination. The compact size of photonic chips also makes them a promising solution for space-based applications such as the upcoming Habitable Worlds Observatory. The Center for High Angular Resolution Astronomy (CHARA) Array is equipped with the world's longest baseline in the near-infrared at 330 meters long. CHARA therefore has the most sensitive angular resolution in the near-infrared. A nuller at CHARA would have access to a novel parameter space essential for exoplanet discovery and characterization. The first step in preparing a nulling beam combiner for CHARA is to develop compelling, realistic, and well-defined science cases. Simulation suites quantify the technical requirements to reach such science goals in their respective complex systems. The CHARA Array Response Model (CHARM) is the first-ever simulator built specifically for CHARA, opening up new pathways for instrument simulation. CHARM is a flexible simulation tool of an H-band, self-calibrated astrophotonic nulling beam combiner with active phase control for the CHARA Array. In this paper, we present an update on the development of our photonic nulling beam combiner for CHARA. We include early results from CHARM, demonstrating that the photonic nuller has the potential to detect and characterize a wide range of bright stellar companion systems.

astro-ph.IM↗

arXiv2026

The Photonic Lantern Nuller: from concept to laboratory and on-sky demonstrations

This thesis work presents the conceptual design and experimental characterization of the Photonic Lantern Nuller instrument, which uses a multimode-to-single-mode demultiplexing waveguide to cancel out starlight while maintaining planet light, allowing for the direct characterization of planets at a telescope's diffraction limit. The PLN was experimentally characterized in the lab, where it was further enhanced using common-path wavefront sensing and control techniques, and then demonstrated on sky at the Subaru Telescope. Highlights include measured in-lab null-depths of $\sim 10^{-4}$ in three out of four ports simultaneously and on-sky null-depths of approximately $\sim 10^{-1}$ (limited by jitter and atmospheric residuals). We provide an overview of these results and discuss avenues for future work.

astro-ph.IM↗

arXiv2026

Characterization and on-sky testing of photonic, AWG-based astronomical spectrographs

Astrophotonics is a field that intends to meet the needs of next-generation instruments at a small footprint, low cost, and high stability, compared to bulk-optics-based alternatives. Much development effort is driven by the stringent requirements of direct detection and characterization of exoplanets. Our team works in characterizing Arrayed-Waveguide Grating (AWG) chips for photonics-based, high-resolution, near infrared spectro-interferometry. AWG spectrographs allow to test the feasibility of photonic spectro-interferometers for exoplanet characterization, another step towards fully photonic instruments for astronomy. We present the current status of our AWG characterization and a preliminary on-sky qualification campaign at the PAPYRUS AO system. We present the CoLiBRIS-AWG spectrograph prototype built for on-sky testing, and preliminary results using our high-resolution (H band, R~18000) AWG for observations of Arcturus (alpha Boötes) and Betelgeuse (alpha Orionis). This work contributes to assessing the capabilities of photonic spectroscopy for the development of future compact instruments.

astro-ph.IM↗

arXiv2026

Tricouplers for nulling interferometry with photonic integrated circuits

Solar System analog gas giants and habitable-zone terrestrial planets are observationally elusive to conventional exoplanet detection and characterization techniques, i.e. transits, radial velocities, and direct imaging. Long baseline nulling interferometry across multiple apertures suppresses starlight and enables detection of faint planetary signals at higher spatial resolution than traditional coronagraphs on single-aperture telescopes. Leveraging technological advancements from the telecommunications industry, photonic integrated circuits (PICs) offer a promising platform for performing the optical operations necessary for astronomical applications, including phasing and beam combination for nulling interferometry in both long-baseline and cross-aperture configurations. PICs provide compact, scalable architectures with reduced sensitivity to alignment as well as thermal and mechanical perturbations compared to bulk optics. However, their design and manufacturing precision remain insufficient for the stringent requirements of exoplanet instrumentation. Here, we investigate the nulling capabilities of photonic tricouplers, devices composed of three equal-width waveguides that are geometrically predisposed to produce achromatic nulls upon beam combination through their symmetric construction. In the laboratory, we characterize null depths in monochromatic light at 1.55 $\mathrmμ$m with devices on a planar silica-on-silicon platform. In broadband $H$-band light, we explore chromatic effects from components such as thermo-optic phase modulators used for fine-phasing. Our ongoing efforts towards maturation of PICs for direct detection and atmospheric characterization of exoplanets will support scalable testing and deployment of high-contrast technologies for future space-based observatories, such as the Habitable Worlds Observatory.

astro-ph.IM↗

arXiv2026

Demonstrating the integration of a photonic lantern with an all-fiber-based nulling interferometer

High-contrast imaging of Solar System scale exoplanets and protoplanets demands advancements in instrumentation to access deeper starlight suppression at smaller angular separations than today's state-of-the-art. The multi-mode to single-mode conversion capabilities of photonic lanterns (PLs) provide new avenues to implement techniques such as nulling interferometry due to the inherent spatial filtering of single-mode waveguides. In this work, we present laboratory results on an all-fiber-based focal plane nulling interferometer using off-the-shelf components operating at 1550 nm. We demonstrate the implementation of a PL for coupling light into the instrument, and compare it to the case when laser light is directly fed into the interferometer. The integration of a PL with the interferometer evidences their potential for feeding photonic-based science instruments. Additionally, we discuss expanding the concept of the instrument for the detection of accreting protoplanets.

astro-ph.IM↗

arXiv2026

Tri-coupler geometries for achromatic nulling interferometry in the near-infrared

Astrophotonics is central to the next generation of astronomical instrumentation, enabling compact photonic integrated circuits for both ground-based observatories and future space missions. Beam combination for nulling interferometry suppresses starlight, revealing exoplanets and companions. Two-waveguide photonic combiners rely on symmetric evanescent, inherently chromatic, coupling to interfere light. A three-waveguide configuration, or tri-coupler, offers the potential for deeper, broader, and more stable achromatic nulls compared with two-waveguide approaches. This work compares the simulated performance of evanescent tri-couplers and a multimode interference coupler across the 1.5-1.8 micron band, evaluating exoplanet throughput, starlight attenuation, sensing characteristics, and estimations on fabrication tolerance. All three tri-couplers achieved >40dB attenuation over a 270nm bandwidth. Including component loss, the tapered tri-coupler has the highest total throughput, averaging 97%, whereas the standard tri-coupler began with an equivalent exoplanet throughput and fell to 50% at the band edges. The tapered tri-coupler was further redesigned to achieve a non-degenerate sensing state. The MMI, while limited to a starlight attenuation of 40dB by uncoupled light, showed the greatest tolerance to fabrication errors. Future designs aim to combine high exoplanet throughput, deep starlight attenuation, and non-degenerate sensing within a single integrated architecture. This work provides a simulation suite for three tri-couplers.

astro-ph.IM↗

arXiv2025

Implicit Electric Field Conjugation with the Photonic Lantern Nuller

The Photonic Lantern Nuller (PLN) is an instrument concept designed to characterize exoplanets within a single beam-width from its host star. The PLN leverages the spatial symmetry of a mode-selective photonic lantern (MSPL) to create nulled ports, which cancel out on-axis starlight but allow off-axis exoplanet light to couple. The null-depths are limited by wavefront aberrations in the system as well as by imperfections in the lantern. We show that the implicit electric field conjugation algorithm can be used to reduce the stellar coupling through the PLN by orders of magnitude while maintaining the majority of the off-axis light, leading to deeper null depths (~10^{-4}) and thus higher sensitivity to potential planet signals. We discuss a theory for the tradeoff we observed between the different ports, where iEFC improves the nulls of some ports at the expense of others, and show that targeting one port alone can lead to deeper starlight rejection through that port than when targeting all ports at once. We also observe different levels of stability depending on the port and discuss the implications for practically implementing this technique for science observations.

astro-ph.IM↗

arXiv2024

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki (α Leo) and `Aua (α Ori)

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional

astro-ph.IM↗

arXiv2024

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗

arXiv2024

Efficient ultra-broadband low-resolution astrophotonic spectrographs

Broadband low-resolution near-infrared spectrographs in a compact form are crucial for ground- and space-based astronomy and other fields of sensing. Astronomical spectroscopy poses stringent requirements including high efficiency, broad band operation ($>$ 300 nm), and in some cases, polarization insensitivity. We present and compare experimental results from the design, fabrication, and characterization of broadband (1200 - 1650 nm) arrayed waveguide grating (AWG) spectrographs built using the two most promising low-loss platforms - Si$_3$N$_4$ (rectangular waveguides) and doped-SiO$_2$ (square waveguides). These AWGs have a resolving power ($λ/Δλ$) of ~200, a free spectral range of ~ 200-350 nm, and a small footprint of ~ 50-100 mm$^2$. The peak overall (fiber-chip-fiber) efficiency of the doped-SiO$_2$ AWG was ~ 79\% (1 dB), and it exhibited a negligible polarization-dependent shift compared to the channel spacing. For Si$_3$N$_4$ AWGs, the peak overall efficiency in TE mode was ~ 50\% (3 dB), and the main loss component was found to be fiber-to-chip coupling losses. These broadband AWGs are key to enabling compact integrations such as multi-object spectrographs or dispersion back-ends for other astrophotonic devices such as photonic lanterns or nulling interferometers.

astro-ph.IM↗

arXiv2024

Laboratory demonstration of a Photonic Lantern Nuller in monochromatic and broadband light

Photonic lantern nulling (PLN) is a method for enabling the detection and characterization of close-in exoplanets by exploiting the symmetries of the ports of a mode-selective photonic lantern (MSPL) to cancel out starlight. A six-port MSPL provides four ports where on-axis starlight is suppressed, while off-axis planet light is coupled with efficiencies that vary as a function of the planet's spatial position. We characterize the properties of a six-port MSPL in the laboratory and perform the first testbed demonstration of the PLN in monochromatic light (1569 nm) and in broadband light (1450 nm to 1625 nm), each using two orthogonal polarizations. We compare the measured spatial throughput maps with those predicted by simulations using the lantern's modes. We find that the morphologies of the measured throughput maps are reproduced by the simulations, though the real lantern is lossy and has lower throughputs overall. The measured ratios of on-axis stellar leakage to peak off-axis throughput are around 10^(-2), likely limited by testbed wavefront errors. These null-depths are already sufficient for observing young gas giants at the diffraction limit using ground-based observatories. Future work includes using wavefront control to further improve the nulls, as well as testing and validating the PLN on-sky.

astro-ph.IM↗

arXiv2023

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

The path to detecting extraterrestrial life with astrophotonics

Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.

astro-ph.IM↗

arXiv2023

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗

arXiv2022

The Final Season Reimagined: 30 Tidal Disruption Events from the ZTF-I Survey

Tidal disruption events (TDEs) offer a unique way to study dormant black holes. While the number of observed TDEs has grown thanks to the emergence of wide-field surveys in the past few decades, questions regarding the nature of the observed optical, UV, and X-ray emission remain. We present a uniformly selected sample of 30 spectroscopically classified TDEs from the Zwicky Transient Facility Phase I survey operations with follow-up \textit{Swift} UV and X-ray observations. Through our investigation into correlations between light curve properties, we recover a shallow positive correlation between the peak bolometric luminosity and decay timescales. We introduce a new spectroscopic class of TDE, TDE-featureless, which are characterized by featureless optical spectra. The new TDE-featureless class shows larger peak bolometric luminosities, peak blackbody temperatures, and peak blackbody radii. We examine the differences between the X-ray bright and X-ray faint populations of TDEs in this sample, finding that X-ray bright TDEs show higher peak blackbody luminosities than the X-ray faint sub-sample. This sample of optically selected TDEs is the largest sample of TDEs from a single survey yet, and the systematic discovery, classification, and follow-up of this sample allows for robust characterization of TDE properties, an important stepping stone looking forward toward the Rubin era.

astro-ph.HE↗

arXiv2022

Flattening laser frequency comb spectra with a high dynamic range, broadband spectral shaper on-a-chip

Spectral shaping is critical to many fields of science. In astronomy for example, the detection of exoplanets via the Doppler effect hinges on the ability to calibrate a high resolution spectrograph. Laser frequency combs can be used for this, but the wildly varying intensity across the spectrum can make it impossible to optimally utilize the entire comb, leading to a reduced overall precision of calibration. To circumvent this, astronomical applications of laser frequency combs rely on a bulk optic setup which can flatten the output spectrum before sending it to the spectrograph. Such flatteners require complex and expensive optical elements like spatial light modulators and have non-negligible bench top footprints. Here we present an alternative in the form of an all-photonic spectral shaper that can be used to flatten the spectrum of a laser frequency comb. The device consists of a circuit etched into a silicon nitride wafer that supports an arrayed-waveguide grating to disperse the light over hundreds of nanometers in wavelength, followed by Mach-Zehnder interferometers to control the amplitude of each channel, thermo-optic phase modulators to phase the channels and a second arrayed-waveguide grating to recombine the spectrum. The demonstrator device operates from 1400 to 1800 nm (covering the astronomical H band), with twenty 20 nm wide channels. The device allows for nearly 40 dBs of dynamic modulation of the spectrum via the Mach-Zehnders , which is greater than that offered by most spatial light modulators. With a superluminescent diode, we reduced the static spectral variation to ~3 dB, limited by the properties of the components used in the circuit and on a laser frequency comb we managed to reduce the modulation to 5 dBs, sufficient for astronomical applications.

physics.optics↗

arXiv2022

An all-photonic, dynamic device for flattening the spectrum of a laser frequency comb for precise calibration of radial velocity measurements

Laser frequency combs are fast becoming critical to reaching the highest radial velocity precisions. One shortcoming is the highly variable brightness of the comb lines across the spectrum (up to 4-5 orders of magnitude). This can result in some lines saturating while others are at low signal and lost in the noise. Losing lines to either of these effects reduces the precision and hence effectiveness of the comb. In addition, the brightness of the comb lines can vary with time which could drive comb lines with initially reasonable SNR's into the two regimes described above. To mitigate these two effects, laser frequency combs use optical flattener's. Flattener's are typically bulk optic setups that disperse the comb light with a grating, and then use a spatial light modulator to control the amplitude across the spectrum before recombining the light into another single mode fiber and sending it to the spectrograph. These setups can be large (small bench top), expensive (several hundred thousand dollars) and have limited stability. To address these issues, we have developed an all-photonic spectrum flattener on a chip. The device is constructed from optical waveguides on a SiN chip. The light from the laser frequency comb's output optical fiber can be directly connected to the chip, where the light is first dispersed using an arrayed waveguide grating. To control the brightness of each channel, the light is passed through a Mach-Zehnder interferometer before being recombined with a second arrayed waveguide grating. Thermo-optic phase modulators are used in each channel before recombination to path length match the channels as needed. Here we present the results from our first generation prototype. The device operates from 1400-1800 nm (covering the H band), with 20, 20 nm wide channels.

astro-ph.IM↗