arXiv subjects

Prahlad Vadakkepat

Publications and source records attributed to Prahlad Vadakkepat.

8 recordsLinked to original sources

arXiv2026

Safe Bayesian Optimization for Complex Control Systems via Additive Gaussian Processes

Automatic controller tuning is attractive for robotics and mechatronic systems whose dynamics are difficult to model accurately, but direct black-box optimization can be unsafe because each query is executed on the physical plant. Existing safe Bayesian optimization (BO) methods provide high-probability safety guarantees, yet their practical use in multi-loop control is limited by two coupled difficulties: the controller parameter space is often moderately high-dimensional, and hardware evaluations are too expensive to allow hundreds or thousands of exploratory trials. This paper proposes \textsc{SafeCtrlBO}, a safe BO method for simultaneously tuning multiple coupled controllers. The method uses additive Gaussian-process kernels to encode low-order structure across controller gains and reduce the sample complexity associated with dense full-dimensional kernels. It also replaces the expensive potential-expander computation used in \textsc{SafeOpt}-style exploration with a boundary-based expansion rule that preserves the intended safe-set expansion behavior under explicit geometric conditions and is validated empirically. Experiments on synthetic benchmarks and on a permanent magnet synchronous motor (PMSM) speed-control platform show that \textsc{SafeCtrlBO} reaches high-performing controller parameters with fewer hardware evaluations than representative safe BO baselines, while maintaining the prescribed high-probability safety criterion and avoiding violations of the hard signal-safety constraint in the hardware study. The code implementation is publicly available at https://github.com/hxwangnus/SafeCtrlBO.

cs.RO↗

arXiv2026

Adaptive Action Chunking at Inference-time for Vision-Language-Action Models

In Vision-Language-Action (VLA) models, action chunking (i.e., executing a sequence of actions without intermediate replanning) is a key technique to improve robotic manipulation abilities. However, a large chunk size reduces the model's responsiveness to new information, while a small one increases the likelihood of mode-jumping, jerky behavior resulting from discontinuities between chunks. Therefore, selecting the optimal chunk size is an urgent demand to balance the model's reactivity and consistency. Unfortunately, a dominant trend in current VLA models is an empirical fixed chunk length at inference-time, hindering their superiority and scalability across diverse manipulation tasks. To address this issue, we propose a novel Adaptive Action Chunking (AAC) strategy, which exploits action entropy as the cue to adaptively determine the chunk size based on current predictions. Extensive experiments on a wide range of simulated and real-world robotic manipulation tasks have demonstrated that our approach substantially improves performance over the state-of-the-art alternatives. The videos and source code are publicly available at https://lance-lot.github.io/adaptive-chunking.github.io/.

cs.RO↗

arXiv2024

Robotic Control Optimization Through Kernel Selection in Safe Bayesian Optimization

Control system optimization has long been a fundamental challenge in robotics. While recent advancements have led to the development of control algorithms that leverage learning-based approaches, such as SafeOpt, to optimize single feedback controllers, scaling these methods to high-dimensional complex systems with multiple controllers remains an open problem. In this paper, we propose a novel learning-based control optimization method, which enhances the additive Gaussian process-based Safe Bayesian Optimization algorithm to efficiently tackle high-dimensional problems through kernel selection. We use PID controller optimization in drones as a representative example and test the method on Safe Control Gym, a benchmark designed for evaluating safe control techniques. We show that the proposed method provides a more efficient and optimal solution for high-dimensional control optimization problems, demonstrating significant improvements over existing techniques.

cs.RO↗

arXiv2024

Evolving R2 to R2+: Optimal, Delayed Line-of-sight Vector-based Path Planning

A vector-based any-angle path planner, R2, is evolved in to R2+ in this paper. By delaying line-of-sight, R2 and R2+ search times are largely unaffected by the distance between the start and goal points, but are exponential in the worst case with respect to the number of collisions during searches. To improve search times, additional discarding conditions in the overlap rule are introduced in R2+. In addition, R2+ resolves interminable chases in R2 by replacing ad hoc points with limited occupied-sector traces from target nodes, and simplifies R2 by employing new abstract structures and ensuring target progression during a trace. R2+ preserves the speed of R2 when paths are expected to detour around few obstacles, and searches significantly faster than R2 in maps with many disjoint obstacles.

cs.RO↗

arXiv2023

R2: Heuristic Bug-Based Any-angle Path-Planning using Lazy Searches

R2 is a novel online any-angle path planner that uses heuristic bug-based or ray casting approaches to find optimal paths in 2D maps with non-convex, polygonal obstacles. R2 is competitive to traditional free-space planners, finding paths quickly if queries have direct line-of-sight. On large sparse maps with few obstacle contours, which are likely to occur in practice, R2 outperforms free-space planners, and can be much faster than state-of-the-art free-space expansion planner Anya. On maps with many contours, Anya performs faster than R2. R2 is built on RayScan, introducing lazy-searches and a source-pledge counter to find successors optimistically on contiguous contours. The novel approach bypasses most successors on jagged contours to reduce expensive line-of-sight checks, therefore requiring no pre-processing to be a competitive online any-angle planner.

cs.RO↗

arXiv2022

Incremental Few-Shot Learning via Implanting and Compressing

This work focuses on tackling the challenging but realistic visual task of Incremental Few-Shot Learning (IFSL), which requires a model to continually learn novel classes from only a few examples while not forgetting the base classes on which it was pre-trained. Our study reveals that the challenges of IFSL lie in both inter-class separation and novel-class representation. Dur to intra-class variation, a novel class may implicitly leverage the knowledge from multiple base classes to construct its feature representation. Hence, simply reusing the pre-trained embedding space could lead to a scattered feature distribution and result in category confusion. To address such issues, we propose a two-step learning strategy referred to as \textbf{Im}planting and \textbf{Co}mpressing (\textbf{IMCO}), which optimizes both feature space partition and novel class reconstruction in a systematic manner. Specifically, in the \textbf{Implanting} step, we propose to mimic the data distribution of novel classes with the assistance of data-abundant base set, so that a model could learn semantically-rich features that are beneficial for discriminating between the base and other unseen classes. In the \textbf{Compressing} step, we adapt the feature extractor to precisely represent each novel class for enhancing intra-class compactness, together with a regularized parameter updating rule for preventing aggressive model updating. Finally, we demonstrate that IMCO outperforms competing baselines with a significant margin, both in image classification task and more challenging object detection task.

cs.CV↗

arXiv2022

Incremental Few-Shot Object Detection for Robotics

Incremental few-shot learning is highly expected for practical robotics applications. On one hand, robot is desired to learn new tasks quickly and flexibly using only few annotated training samples; on the other hand, such new additional tasks should be learned in a continuous and incremental manner without forgetting the previous learned knowledge dramatically. In this work, we propose a novel Class-Incremental Few-Shot Object Detection (CI-FSOD) framework that enables deep object detection network to perform effective continual learning from just few-shot samples without re-accessing the previous training data. We achieve this by equipping the widely-used Faster-RCNN detector with three elegant components. Firstly, to best preserve performance on the pre-trained base classes, we propose a novel Dual-Embedding-Space (DES) architecture which decouples the representation learning of base and novel categories into different spaces. Secondly, to mitigate the catastrophic forgetting on the accumulated novel classes, we propose a Sequential Model Fusion (SMF) method, which is able to achieve long-term memory without additional storage cost. Thirdly, to promote inter-task class separation in feature space, we propose a novel regularization technique that extends the classification boundary further away from the previous classes to avoid misclassification. Overall, our framework is simple yet effective and outperforms the previous SOTA with a significant margin of 2.4 points in AP performance.

cs.CV↗

arXiv2021

Towards Generalized and Incremental Few-Shot Object Detection

Real-world object detection is highly desired to be equipped with the learning expandability that can enlarge its detection classes incrementally. Moreover, such learning from only few annotated training samples further adds the flexibility for the object detector, which is highly expected in many applications such as autonomous driving, robotics, etc. However, such sequential learning scenario with few-shot training samples generally causes catastrophic forgetting and dramatic overfitting. In this paper, to address the above incremental few-shot learning issues, a novel Incremental Few-Shot Object Detection (iFSOD) method is proposed to enable the effective continual learning from few-shot samples. Specifically, a Double-Branch Framework (DBF) is proposed to decouple the feature representation of base and novel (few-shot) class, which facilitates both the old-knowledge retention and new-class adaption simultaneously. Furthermore, a progressive model updating rule is carried out to preserve the long-term memory on old classes effectively when adapt to sequential new classes. Moreover, an inter-task class separation loss is proposed to extend the decision region of new-coming classes for better feature discrimination. We conduct experiments on both Pascal VOC and MS-COCO, which demonstrate that our method can effectively solve the problem of incremental few-shot detection and significantly improve the detection accuracy on both base and novel classes.

cs.CV↗