SearcharxivSearch

arXiv subjects

Pranav Jha

Publications and source records attributed to Pranav Jha.

18 recordsLinked to original sources

Lost in Interpretation: The Plausibility-Faithfulness Trade-off in Cross-Lingual Explanations

LLMs deployed multilingually are often audited via English explanations for non-English inputs. We evaluate extractive explanations ''where the model identifies input token spans as evidence alongside a generated rationale'' and uncover a systematic trade-off: English-pivot explanations can achieve higher span agreement with human rationales while their evidence becomes less causally grounded in the model's prediction, as measured by both comprehensiveness and sufficiency. Across 3 tasks, 5~languages, and 2~multilingual LLM families, we find that English explanations frequently produce fluent but loosely anchored rationales, with comprehensiveness degrading by up to 5.7x relative to native-language conditions - even as task accuracy remains stable across settings. For socially nuanced classification, English pivots also fail to preserve pragmatic cues, reducing both faithfulness and span agreement. We recommend auditing explanations in the input language, reporting multi-faceted faithfulness metrics beyond lexical overlap, and treating English rationales as communication summaries rather than faithful decision traces.

cs.CL

ITU-T Y.2325: NGN Evolution Towards Future

International Telecommunications Union (ITU) defined Next Generation Network (NGN) underlies most wireline and wireless packet-based telecommunications networks. A key design principle of NGN is decoupling of service-related functions from the underlying transport stratum, making user services independent of transport technologies. Interestingly, the NGN architecture, as defined in ITU standards, did not follow this design principle for internal network services, e.g., mobility, or authentication though adhering for external user services like IPTV or Multimedia services. These internal services are handled by the NGN transport control plane, making them an intrinsic part of the transport stratum, resulting in a tightly coupled service and transport functionality as opposed to the proclaimed design goal. This design choice may force each transport technology to support internal services individually, e.g., separate authentication service for each transport, leading to duplication. Since the NGN architecture is the base underlying architecture for most packet-based telecommunications network including advanced cellular networks like 4th/5th Generation cellular networks, the limitation persists in these cellular networks as well. To remedy the situation, the decoupling of service and transport can be generalized to include internal services like mobility and authentication also. In this context, the recently published ITU Y.2325 recommendation, defines an evolved NGN architecture, wherein all services, including internal network services, are decoupled from the transport stratum. The proposal results in a more scalable and modular evolved NGN architecture that can be used as a template for all future telecom networks including IMT-2030 (6th generation mobile networks). In this article, we review the evolved NGN architecture, as proposed in ITU-T Y.2325.

cs.NI

AI/ML in 3GPP 5G Advanced -- Services and Architecture

The 3rd Generation Partnership Project (3GPP), the standards body for mobile networks, is in the final phase of Release 19 standardization and is beginning Release 20. Artificial Intelligence/ Machine Learning (AI/ML) has brought about a paradigm shift in technology and it is being adopted across industries and verticals. 3GPP has been integrating AI/ML into the 5G advanced system since Release 18. This paper focuses on the AI/ML related technological advancements and features introduced in Release 19 within the Service and System Aspects (SA) Technical specifications group of 3GPP. The advancements relate to two paradigms: (i) enhancements that AI/ML brought to the 5G advanced system (AI for network), e.g. resource optimization, and (ii) enhancements that were made to the 5G system to support AI/ML applications (Network for AI), e.g. image recognition.

cs.ET

Energy-Aware 6G Network Design: A Survey

6th Generation (6G) mobile networks are envisioned to support several new capabilities and data-centric applications for unprecedented number of users, potentially raising significant energy efficiency and sustainability concerns. This brings focus on sustainability as one of the key objectives in the their design. To move towards sustainable solution, research and standardization community is focusing on several key issues like energy information monitoring and exposure, use of renewable energy, and use of Artificial Intelligence/Machine Learning (AI/ML) for improving the energy efficiency in 6G networks. The goal is to build energy-aware solutions that takes into account the energy information resulting in energy efficient networks. Design of energy-aware 6G networks brings in new challenges like increased overheads in gathering and exposing of energy related information, and the associated user consent management. The aim of this paper is to provide a comprehensive survey of methods used for design of energy efficient 6G networks, like energy harvesting, energy models and parameters, classification of energy-aware services, and AI/ML-based solutions. The survey also includes few use cases that demonstrate the benefits of incorporating energy awareness into network decisions. Several ongoing standardization efforts in 3GPP, ITU, and IEEE are included to provide insights into the ongoing work and highlight the opportunities for new contributions. We conclude this survey with open research problems and challenges that can be explored to make energy-aware design feasible and ensure optimality regarding performance and energy goals for 6G networks.

cs.NI

A Flexible Architecture for Broadcast Broadband Convergence in Beyond 5G

There has been an exponential increase in the usage of multimedia services in mobile networks in recent years. To address this accelerating data demand, mobile networks are experiencing a subtle transformation in their architecture. One of the changes in this direction is the support of Multicast/Broadcast Service (MBS) in the Third Generation Partnership Project (3GPP) Fifth Generation (5G) network. The MBS has been introduced to enhance resource utilization and user experience in 3GPP 5G networks. However, there are certain limitations in the 3GPP 5G MBS architecture, such as the selection of the delivery method (unicast or broadcast) by the core network (may result in sub-optimal radio resource utilization) and no provision for converging non-3GPP broadcast technologies (like digital terrestrial television) with cellular (3GPP 5G) broadband. In this context, we propose a new architecture for the convergence of cellular broadband and non-3GPP broadcast networks. A novelty of the architecture is that it treats signalling exchange with User Equipment (UE) as data (service) which results in improved scalability of mobile networks. The architecture supports enhanced flexibility in choosing a delivery method (3GPP 5G unicast, 3GPP 5G broadcast, or non-3GPP broadcast) for user data. We evaluate the performance of the proposed architecture using process algebra-based simulations, demonstrating a significant reduction in the number of signalling messages exchanged between the UE and the network for MBS session establishment as compared to the 3GPP 5G network.

cs.NI

Applying SDN to Mobile Networks: A New Perspective for 6G Architecture

The upcoming Sixth Generation (6G) mobile communications system envisions supporting a variety of use cases with differing characteristics, e.g., very low to extremely high data rates, diverse latency needs, ultra massive connectivity, sustainable communications, ultra-wide coverage etc. To accommodate these diverse use cases, the 6G system architecture needs to be scalable, modular, and flexible; both in its user plane and the control plane. In this paper, we identify some limitations of the existing Fifth Generation System (5GS) architecture, especially that of its control plane. Further, we propose a novel architecture for the 6G System (6GS) employing Software Defined Networking (SDN) technology to address these limitations of the control plane. The control plane in existing 5GS supports two different categories of functionalities handling end user signalling (e.g., user registration, authentication) and control of user plane functions. We propose to move the end-user signalling functionality out of the mobile network control plane and treat it as user service, i.e., as payload or data. This proposal results in an evolved service-driven architecture for mobile networks bringing increased simplicity, modularity, scalability, flexibility and security to its control plane. The proposed architecture can also support service specific signalling support, if needed, making it better suited for diverse 6GS use cases. To demonstrate the advantages of the proposed architecture, we also compare its performance with the 5GS using a process algebra-based simulation tool.

cs.NI

An Architecture for Control Plane Slicing in Beyond 5G Networks

To accommodate various use cases with differing characteristics, the Fifth Generation (5G) mobile communications system intends to utilize network slicing. Network slicing enables the creation of multiple logical networks over a shared physical network infrastructure. While the problems such as resource allocation for multiple slices in mobile networks have been explored in considerable detail in the existing literature, the suitability of the existing mobile network architecture to support network slicing has not been analysed adequately. We think the existing 5G System (5GS) architecture suffers from certain limitations, such as a lack of slice isolation in its control plane. This work focuses on the future evolution of the existing 5GS architecture from a slicing perspective, especially that of its control plane, addressing some of the limitations of the existing 5GS architecture. We propose a new network architecture which enables efficient slicing in beyond 5G networks. The proposed architecture results in enhanced modularity and scalability of the control plane in sliced mobile networks. In addition, it also brings slice isolation to the control plane, which is not feasible in the existing 5G system. We also present a performance evaluation that confirms the improved performance and scalability of the proposed system viz a viz the existing 5G system.

cs.NI

Leveraging Multi-Connectivity for Multicast Video Streaming

Multi-connectivity has emerged as a key enabler for providing seamless connectivity in cellular mobile networks. However, its potential for improving the quality of multicast transmissions has remained unexplored. In this paper, we investigate the use of multi-connectivity in wireless multicast streaming. Multi-connectivity can significantly improve the performance of multicast services. It especially benefits the cell edge users who often suffer from poor channel conditions. In this work, we assess the impact of multi-connectivity on the performance of multicast streaming. We propose procedures for establishing multi-connectivity in a multicast system and address the associated resource allocation problem. We prove that the optimal resource allocation problem is NP-hard. We propose a greedy approximation algorithm for this problem and prove that no other polynomial-time algorithm can provide a better approximation. Since video streaming is the primary use case under consideration here, we use traces from actual videos to generate realistic video traffic patterns in our simulations. Our simulation results clearly establish that multi-connectivity results in considerable performance improvement in multicast streaming.

cs.NI

A Flexible IAB Architecture for Beyond 5G Network

IAB is an innovative wireless backhaul solution to provide cost-efficient deployment of small cells for successful 5G adoption. Besides, IAB can utilize the same spectrum for access and backhaul purposes. The 3GPP standardized IAB in Release 16 and would incorporate a few enhancements in the upcoming releases. The 3GPP IAB architecture, however, suffers from some limitations, such as it does not support mobile relays or dual-connectivity. This article presents a novel IAB architecture that addresses these limitations and is transparent to legacy operations of the 5G system. The architecture also supports multi-RAT coexistence where access and backhaul may belong to different RATs. These factors (and many others) enable operators to capitalize on the architecture for deploying IAB anywhere in a plug-and-play manner. We also show the merits of the architecture by evaluating its capacity and mobility robustness compared to the 3GPP architecture. Simulation results corroborate our design approach. Owing its robust design, the architecture can contend for standardization in B5G system.

cs.NI

5G-Flow: Flexible and Efficient 5G RAN Architecture Using OpenFlow

Convergence of multiple access technologies is one of the key enablers in providing a diverse set of services to the Fifth Generation (5G) users. Though the 3rd Generation Partnership Project (3GPP) 5G standard defines a common core supporting multiple Radio Access Technologies (RATs), Radio Access Network (RAN) level decisions are taken separately across individual RATs as the existing 5G architecture lacks a unified control and management framework for a multi-RAT network. A unified access network is likely to utilize RAN resources more efficiently and provide an improved performance. To bridge these gaps, we present an OpenFlow based RAN architecture comprising multiple RATs. We refer to it as \textit{5G-Flow}. With minimal changes in the 3GPP 5G RAN and none in the core network, we are able to realize a unified and integrated multi-access 5G-Flow RAN. We simplify the existing 3GPP 5G RAN by replacing RAN nodes with OpenFlow switches and a Software-Defined Networking (SDN) controller. Moreover, a UE in the 5G-Flow network can use 5G RAN to connect to any core network (4G or 5G) or directly connect to Internet without going via the core network. We also present a simple method to realize 5G non-standalone architecture using 5G-Flow RAN. We have developed an evaluation platform to compare the performance of our architecture with the standard 3GPP 5G network. Results demonstrate significant gains in the network performance of 5G-Flow RAN architecture over the existing 3GPP 5G network.

cs.NI

Proportional Fairness through Dual Connectivity in Heterogeneous Networks

Proportional Fair (PF) is a scheduling technique to maintain a balance between maximizing throughput and ensuring fairness to users. Dual Connectivity (DC) technique was introduced by the 3rd Generation Partnership Project (3GPP) to improve the mobility robustness and system capacity in heterogeneous networks. In this paper, we demonstrate the utility of DC in improving proportional fairness in the system. We propose a low complexity centralized PF scheduling scheme for DC and show that it outperforms the standard PF scheduling scheme. Since the problem of dual association of users for maximizing proportional fairness in the system is NP-hard, we propose three heuristic user association schemes for DC. We demonstrate that DC, along with the proposed PF scheme, gives remarkable gains on PF utility over single connectivity and performs almost close to the optimal PF scheme in heterogeneous networks.

cs.NI

Open5G: A Software-Defined Networking Protocol for 5G Multi-RAT Wireless Networks

Mobile Networks today comprise of multiple Radio Access Technologies (RATs), e.g., 4G LTE, Wireless Local Area Network (WLAN), and the upcoming 5G-New Radio (5G-NR). The access networks of these RATs are controlled by RAT-specific entities, e.g., the resource management function located inside an individual LTE eNB is used for the eNB control, or access controllers are used for controlling WLAN Access Points. Even in the 3GPP's 5G architecture, which has a common Core supporting multiple RATs, radio access related decisions are taken independently within individual RATs. Due to the fragmented nature of control-plane in multi-RAT Radio Access Network (RAN), a unified global view of network resources is unavailable, hindering optimized allocation of resources. It also brings complexity to the features involving multiple RATs, e.g., dual connectivity. To address these issues, we introduced an SDN-based Multi-RAT RAN architecture (SMRAN) in our earlier work [arXiv:1812.11825], where the RAN control-plane is segregated from the data-plane. As part of the SMRAN architecture, we defined a logically centralized multi-RAT RAN Controller and individual RAT-specific data-plane functions. In the current work, we define a protocol, called Open5G, to be used for control and management of the SMRAN data-plane. Open5G is based on OpenFlow (OF) and OF-Config, which are commonly used protocols in the SDN-based wired networks and data centers.

cs.NI

Realizing the Frugal 5G Network

In order to make effective use of the Internet, broadband connectivity is a pre-requisite. However, in the majority of rural areas in developing countries, high-speed connectivity is unavailable. The Frugal 5G network architecture presented in this paper aims at enabling broadband in rural areas by addressing the challenges associated with it. The work presented in this paper is a development over our previous work, in which we proposed abstract network architecture for Frugal 5G. In this paper, we provide an innovative solution to realize the Frugal 5G network. We identify the key system requirements and show that the proposed solution enables an uncomplicated and flexible realization of the Frugal 5G network. We are currently building a testbed to implement the proposed changes.

cs.NI

Connecting the Unconnected: Towards Frugal 5G Network Architecture and Standardization

This article adopts a holistic approach to address the problem of poor broadband connectivity in rural areas by suggesting a novel wireless network architecture, also called the "Frugal 5G Network". To arrive at the Frugal 5G Network architecture, we take into consideration the rural connectivity needs and the characteristics specific to rural areas. As part of the proposed Frugal 5G Network, we define a heterogeneous Access Network wherein macro cells provide a carpet coverage while Wireless Local Area Networks (WLANs) provide additional capacity to serve the village clusters. WLAN is backhauled via a wireless network also called the wireless middle mile network. We define a Software Defined Networking (SDN) and Network Function Virtualization (NFV) based architecture to make the network flexible and scalable. The concepts of Fog computing have also been employed in the network architecture to bring intelligence to the edge, i.e., to the access network. Through a novel amalgamation of these technologies, we are able to address the connectivity requirements of rural areas. The proposed network architecture can serve as a potential solution towards IEEE P2061, a standardization project that aims to design an architecture to facilitate rural broadband communication.

cs.NI

Control and Management of Multiple RATs in Wireless Networks: An SDN Approach

Telecom operators are using a variety of Radio Access Technologies (RATs) for providing services to mobile subscribers. This development has emphasized the requirement for unified control and management of diverse RATs. Although multiple RATs co-exist within today's cellular networks, each RAT is controlled by a set of different entities. This may lead to suboptimal utilization of the overall network resources. In this article, we review various architectures for multi-RAT control proposed by both industry and academia. We also propose a novel SDN based network architecture for end-to-end control and management of diverse RATs. The architecture is scalable and provides a framework for improved network performance over the present day architecture and proposals in existing literature. Our architecture also provides a framework for deployment of applications in a RAT agnostic fashion. It facilitates network slicing and enables the provision of Quality of Service (QoS) guarantees to the end user. We have also developed an evaluation platform based on ns-3 to evaluate the performance offered by the architecture. Experimental results obtained using the platform demonstrate the benefits provided by our architecture.

eess.SP

Dual Connectivity Support in 5G Networks: An SDN based approach

Dual Connectivity (DC) is one of the key techniques to harness the potential of heterogeneous cellular networks. However, 3rd Generation Partnership Project (3GPP) has introduced disparate mechanisms for DC support in different Radio Access Technologies (RATs), bringing complexity to the network nodes in a Multi-RAT Radio Access Network (RAN). Moreover, DC support requires an exchange of high volume of control information between these network nodes. To address these issues, in this paper an SDN based architecture for Multi-RAT RAN is proposed. The proposed architecture brings simplicity to the network interactions, allows flexibility in the network and helps the network in performing load balancing and mobility management functions effectively. We also demonstrate a reduction in the control signaling and an improvement in system performance compared to legacy architecture.

cs.NI

SDN based Control and Management of WLANs in the 3GPP 5G Network

The exponential growth in mobile broadband usage [1] has catalyzed the need for high data rate communication systems. In this regard, activities for standardizing the next generation mobile broadband system, known as the Fifth Generation(5G) system are underway. The 5G system also enables the integration of Institute of Electrical and Electronic Engineers (IEEE) Wireless Local Area Networks (WLANs) for providing cost-effective broadband connectivity. It is therefore imperative to find solutions for control and management of WLANs, while providing seamless inter-working capabilities with the cellular network. In this paper, we propose a novel Software Defined Networking (SDN) based architecture for efficient control and management of IEEE WLANs while providing a mechanism for smooth integration of WLANs within the 5G system.

cs.NI

A Centralized SDN Architecture for the 5G Cellular Network

In order to meet the increasing demands of high data rate and low latency cellular broadband applications, plans are underway to roll out the Fifth Generation (5G) cellular wireless system by the year 2020. This paper proposes a novel method for adapting the Third Generation Partnership Project (3GPP)'s 5G architecture to the principles of Software Defined Networking (SDN). We propose to have centralized network functions in the 5G network core to control the network, end-to-end. This is achieved by relocating the control functionality present in the 5G Radio Access Network (RAN) to the network core, resulting in the conversion of the base station known as the gNB into a pure data plane node. This brings about a significant reduction in signaling costs between the RAN and the core network. It also results in improved system performance. The merits of our proposal have been illustrated by evaluating the Key Performance Indicators (KPIs) of the 5G network, such as network attach (registration) time and handover time. We have also demonstrated improvements in attach time and system throughput due to the use of centralized algorithms for mobility management with the help of ns-3 simulations.

eess.SP