Searcharxiv⌕ Search

arXiv subjects

Prem Kumar

Publications and source records attributed to Prem Kumar.

At least 37 records · Page 2Linked to original sources
arXiv2024

Quantum teleportation coexisting with classical communications in optical fiber

The ability for quantum and conventional networks to operate in the same optical fibers would aid the deployment of quantum network technology on a large scale. Quantum teleportation is a fundamental operation in quantum networking, but has yet to be demonstrated in fibers populated with high-power conventional optical signals. Here we report to the best of our knowledge the first demonstration of quantum teleportation over fibers carrying conventional telecommunications traffic. Quantum state transfer is achieved over a 30.2-km fiber carrying 400-Gbps C-band classical traffic with a Bell state measurement performed at the fiber's midpoint. To protect quantum fidelity from spontaneous Raman scattering noise, we use optimal O-band quantum channels, narrow spectro-temporal filtering, and multi-photon coincidence detection. Fidelity is shown to be well maintained with an elevated C-band launch power of 18.7 dBm for the single-channel 400-Gbps signal, which we project could support multiple classical channels totaling many terabits/s aggregate data rates. These results show the feasibility of advanced quantum and classical network applications operating within a unified fiber infrastructure.

quant-ph↗
arXiv2024

Sustainable Quantum Computing: Opportunities and Challenges of Benchmarking Carbon in the Quantum Computing Lifecycle

While researchers in both industry and academia are racing to build Quantum Computing (QC) platforms with viable performance and functionality, the environmental impacts of this endeavor, such as its carbon footprint, e-waste generation, mineral use, and water and energy consumption, remain largely unknown. A similar oversight occurred during the semiconductor revolution and continues to have disastrous consequences for the health of our planet. As we build the quantum computing stack from the ground up, it is crucial to comprehensively assess it through an environmental sustainability lens for its entire life-cycle: production, use, and disposal. In this paper, we highlight the need and challenges in establishing a QC sustainability benchmark that enables researchers to make informed architectural design decisions and celebrate the potential quantum environmental advantage. We propose a carbon-aware quantum computing (CQC) framework that provides the foundational methodology and open research questions for calculating the total life-cycle carbon footprint of a QC platform. Our call to action to the research community is the establishment of a new research direction known as, sustainable quantum computing that promotes both quantum computing for sustainability-oriented applications and the sustainability of quantum computing.

quant-ph↗
arXiv2024

Hong-Ou-Mandel Interference with a Coexisting Clock using Transceivers for Synchronization over Deployed Fiber

Interference between independently generated photons is a key step towards distributing entanglement over long distances, but it requires synchronization between the distantly-located photon sources. Synchronizing the clocks of such photon sources using coexisting two-way classical optical communications over the same fiber that transport the quantum photonic signals is a promising approach for achieving photon-photon interference over long distances, enabling entanglement distribution for quantum networking using the deployed fiber infrastructure. Here, we demonstrate photon-photon interference by observing the Hong-Ou-Mandel dip between two distantly-located sources: a weak coherent state source obtained by attenuating the output of a laser and a heralded single-photon source. We achieve a maximum dip visibility of $0.58 \pm 0.04$ when the two sources are connected via $4.3$ km of deployed fiber. Dip visibilities $>0.5$ are nonclassical and a first step towards achieving teleportation over the deployed fiber infrastructure. In our experiment, the classical optical communication is achieved with $-21$ dBm of optical signal launch power, which is used to synchronize the clocks in the two independent, distantly-located photon sources. The impact of spontaneous Raman scattering from the classical optical signals is mitigated by appropriate choice of the quantum and classical channel wavelengths. All equipment used in our experiment (the photon sources and the synchronization setup) is commercially available. Finally, our experiment represents a scalable approach to enabling practical quantum networking with commercial equipment and coexistence with classical communications in optical fiber.

quant-ph↗
arXiv2023

Fiber Loop Quantum Buffer for Photonic Qubits

We report a fiber loop quantum buffer based on a low-loss 2$\times$2 switch and a unit delay made of a fiber delay line. We characterize the device by using a two-photon polarization entangled state in which one photon of the entangled photon pair is stored and retrieved at a repetition rate up to 78$\,\rm{kHz}$. The device, which enables integer multiples of a unit delay, can store the qubit state in a unit of fiber delay line up to 5.4$\,\rm{km}$ and the number of loop round-trips up to 3. Furthermore, we configure the device with other active elements to realize integer multiplies and divider of a unit delay of a qubit. The quantum state tomography is performed on the retrieved photon and its entangled photon. We obtain a state fidelity $>94\%$ with a maximum storage time of 52$\,μ\rm{sec}$. To further characterize the storing and retrieving processes of the device, we perform entanglement-assisted quantum process tomography on the buffered qubit state. The process fidelity of the device is $>$ 0.98. Our result implies that the device preserves the superposition and entanglement of a qubit state from a two-photon polarization-entangled state. This is a significant step towards facilitating applications in optical asynchronous transfer mode (ATM) based quantum networks.

quant-ph↗
arXiv2023

Quantum Wrapper Networking

We introduce a new concept of Quantum Wrapper Networking, which enables control, management, and operation of quantum networks that can co-exist with classical networks while keeping the requirements for quantum networks intact. The quantum wrapper networks (QWNs) enable the transparent and interoperable transportation of quantum wrapper datagrams consisting of quantum payloads and, notably, classical headers to facilitate the datagram switching without measuring or disturbing the qubits of the quantum payload. Furthermore, QWNs can utilize the common network control and management for performance monitoring on the classical header and infer the quantum channel quality.

quant-ph↗
arXiv2023

Designing Noise-Robust Quantum Networks Coexisting in the Classical Fiber Infrastructure

The scalability of quantum networking will benefit from quantum and classical communications coexisting in shared fibers, the main challenge being spontaneous Raman scattering noise. We investigate the coexistence of multi-channel O-band quantum and C-band classical communications. We characterize multiple narrowband entangled photon pair channels across 1282 nm-1318 nm co-propagating over 48 km installed standard fiber with record C-band power (>18 dBm) and demonstrate that some quantum-classical wavelength combinations significantly outperform others. We analyze the Raman noise spectrum, optimal wavelength engineering, multi-photon pair emission in entangled photon-classical coexistence, and evaluate the implications for future quantum applications.

quant-ph↗
arXiv2023

Accelerating Progress Towards Practical Quantum Advantage: The Quantum Technology Demonstration Project Roadmap

Quantum information science and technology (QIST) is a critical and emerging technology with the potential for enormous world impact and is currently invested in by over 40 nations. To bring these large-scale investments to fruition and bridge the lower technology readiness levels (TRLs) of fundamental research at universities to the high TRLs necessary to realize the promise of practical quantum advantage accessible to industry and the public, we present a roadmap for Quantum Technology Demonstration Projects (QTDPs). Such QTDPs, focused on intermediate TRLs, are large-scale public-private partnerships with a high probability of translation from laboratory to practice. They create technology demonstrating a clear 'quantum advantage' for science breakthroughs that are user-motivated and will provide access to a broad and diverse community of scientific users. Successful implementation of a program of QTDPs will have large positive economic impacts.

quant-ph↗
arXiv2022

Design and Implementation of the Illinois Express Quantum Metropolitan Area Network

The Illinois Express Quantum Network (IEQNET) is a program to realize metropolitan scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes generate or measure quantum signals such as entangled photons and communicate the measurement results via standard, classical signals and conventional networking processes. The entangled photons in IEQNET nodes are generated at multiple wavelengths, and are selectively distributed to the desired users via transparent optical switches. Here we describe the network architecture of IEQNET, including the Internet-inspired layered hierarchy that leverages software-defined networking (SDN) technology to perform traditional wavelength routing and assignment between the Q-nodes. Specifically, SDN decouples the control and data planes, with the control plane being entirely implemented in the classical domain. We also discuss the IEQNET processes that address issues associated with synchronization, calibration, network monitoring, and scheduling. An important goal of IEQNET is to demonstrate the extent to which the control plane classical signals can co-propagate with the data plane quantum signals in the same fiber lines (quantum-classical signal "coexistence"). This goal is furthered by the use of tunable narrow-band optical filtering at the receivers and, at least in some cases, a wide wavelength separation between the quantum and classical channels. We envision IEQNET to aid in developing robust and practical quantum networks by demonstrating metro-scale quantum communication tasks such as entanglement distribution and quantum-state teleportation.

quant-ph↗
arXiv2022

Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories

We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.

quant-ph↗
arXiv2022

Quantum computing hardware for HEP algorithms and sensing

Quantum information science harnesses the principles of quantum mechanics to realize computational algorithms with complexities vastly intractable by current computer platforms. Typical applications range from quantum chemistry to optimization problems and also include simulations for high energy physics. The recent maturing of quantum hardware has triggered preliminary explorations by several institutions (including Fermilab) of quantum hardware capable of demonstrating quantum advantage in multiple domains, from quantum computing to communications, to sensing. The Superconducting Quantum Materials and Systems (SQMS) Center, led by Fermilab, is dedicated to providing breakthroughs in quantum computing and sensing, mediating quantum engineering and HEP based material science. The main goal of the Center is to deploy quantum systems with superior performance tailored to the algorithms used in high energy physics. In this Snowmass paper, we discuss the two most promising superconducting quantum architectures for HEP algorithms, i.e. three-level systems (qutrits) supported by transmon devices coupled to planar devices and multi-level systems (qudits with arbitrary N energy levels) supported by superconducting 3D cavities. For each architecture, we demonstrate exemplary HEP algorithms and identify the current challenges, ongoing work and future opportunities. Furthermore, we discuss the prospects and complexities of interconnecting the different architectures and individual computational nodes. Finally, we review several different strategies of error protection and correction and discuss their potential to improve the performance of the two architectures. This whitepaper seeks to reach out to the HEP community and drive progress in both HEP research and QIS hardware.

quant-ph↗
arXiv2021

Illinois Express Quantum Network (IEQNET): Metropolitan-scale experimental quantum networking over deployed optical fiber

The Illinois Express Quantum Network (IEQNET) is a program to realize metro-scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes generate or measure quantum signals such as entangled photons and communicate the results via standard, classical, means. The entangled photons in IEQNET nodes are generated at multiple wavelengths, and are selectively distributed to the desired users via optical switches. Here we describe the network architecture of IEQNET, including the Internet-inspired layered hierarchy that leverages software-defined-networking (SDN) technology to perform traditional wavelength routing and assignment between the Q-nodes. Specifically, SDN decouples the control and data planes, with the control plane being entirely classical. Issues associated with synchronization, calibration, network monitoring, and scheduling will be discussed. An important goal of IEQNET is demonstrating the extent to which the control plane can coexist with the data plane using the same fiber lines. This goal is furthered by the use of tunable narrow-band optical filtering at the receivers and, at least in some cases, a wide wavelength separation between the quantum and classical channels. We envision IEQNET to aid in developing robust and practical quantum networks by demonstrating metro-scale quantum communication tasks such as entanglement distribution and quantum-state teleportation.

quant-ph↗
arXiv2020

Development of Quantum InterConnects for Next-Generation Information Technologies

Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required. This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years.

quant-ph↗
arXiv2019

Quantum Networks For Open Science

The United States Department of Energy convened the Quantum Networks for Open Science (QNOS) Workshop in September 2018. The workshop was primarily focused on quantum networks optimized for scientific applications with the expectation that the resulting quantum networks could be extended to lay the groundwork for a generalized network that will evolve into a quantum internet.

quant-ph↗
arXiv2017

Inverse-Designed Stretchable Metalens with Tunable Focal Distance

In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building polymer blocks with complex shapes, as opposed to conventional monolithic lenses. Proposed metalens provides better performance than a conventional Fresnel lens, using lesser amount of material and enabling larger focal distance tunability. The metalens is fabricated using a commercial 3D-printer and attached to a stretchable platform. Measurements and simulations show that focal distance can be tuned by a factor of 4 with a stretching factor of only 75%, a nearly diffraction-limited focal spot, and with a 70% focusing efficiency. The proposed platform can be extended for design and fabrication of multiple electromagnetic devices working from visible to microwave radiation depending on scaling of the devices.

physics.app-ph↗
arXiv2017

Inverse designed broadband all-dielectric electromagnetic metadevices

We present an all-dielectric metadevice platform realized by combining an inverse electromagnetic design computational method with additive manufacturing. As opposed to conventional flat metasurface based devices that are composed of resonant building blocks resulting in narrow band operation, our design approach creates non-resonant, extremely broadband metadevices. We propose and demonstrate high-efficiency (transmission > 60%), using thin all-dielectric metadevices that are capable of polarization splitting, beam bending, and focusing. Experimental demonstrations are performed at millimeter-wave frequencies using 3D-printed metadevices, however our proposed platform can be readily applied to the design and fabrication of electromagnetic and photonic metadevices spanning microwave to optical frequencies.

physics.app-ph↗
arXiv2017

Programmable optical waveform reshaping on a picosecond timescale

We experimentally demonstrate temporal reshaping of optical waveforms in the telecom wavelength band using the principle of quantum frequency conversion. The reshaped optical pulses do not undergo any wavelength translation. The interaction takes place in a nonlinear $χ^{(2)}$ waveguide using an appropriately designed pump pulse programmed via an optical waveform generator. We show reshaping of a single-peak pulse into a double-peak pulse and vice versa. We also show that exponentially decaying pulses can be reshaped into near Gaussian shape, and vice versa, which is a useful functionality for quantum communications.

quant-ph↗
arXiv2016

Multidimensional mode-separable frequency conversion for high-speed quantum communication

Quantum frequency conversion (QFC) of photonic signals preserves quantum information while simultaneously changing the signal wavelength. A common application of QFC is to translate the wavelength of a signal compatible with the current fiber-optic infrastructure to a shorter wavelength more compatible with high quality single-photon detectors and optical memories. Recent work has investigated the use of QFC to manipulate and measure specific temporal modes (TMs) through tailoring of the pump pulses. Such a scheme holds promise for multidimensional quantum state manipulation that is both low loss and re-programmable on a fast time scale. We demonstrate the first QFC temporal mode sorting system in a four-dimensional Hilbert space, achieving a conversion efficiency and mode separability as high as 92% and 0.84, respectively. A 20-GHz pulse train is projected onto 6 different TMs, including superposition states, and mode separability with weak coherent signals is verified via photon counting. Such ultrafast high-dimensional photonic signals could enable long-distance quantum communication with high rates.

quant-ph↗