arXiv subjects

Pu Xiao

Publications and source records attributed to Pu Xiao.

8 recordsLinked to original sources

arXiv2026

Signatures of nodal superconductivity in stoichiometric FeTe

Superconductivity in stoichiometric FeTe opens access to the FeTe endpoint of the Fe(Se,Te) phase diagram, yet the nature of its superconducting pairing state remains unresolved. In this work, we combine scanning superconducting quantum interference device (SQUID) microscopy, electrical transport, scanning tunneling microscopy and spectroscopy (STM/S), and mean-field calculations to investigate the local superfluid response and pairing state of FeTe thin films with tunable stoichiometry. Even in stoichiometric FeTe, we observe micrometer-scale spatial variations in both superfluid stiffness and superconducting transition temperature $T_c$, while the London penetration depth remains non-saturating down to 0.02$T_c$ and follows a power-law temperature dependence with an exponent of approximately 1-1.5. Together with a V-shaped low-energy density of states and two-gap modeling, these results indicate a superconducting state with gap nodes or deep minima, consistent with either a $d$-wave or nodal $s$-wave superconducting state. Our findings establish stoichiometric FeTe as a distinct superconducting regime that departs from the trend toward more isotropic gaps at intermediate Se/Te compositions, providing a new benchmark for modern microscopic theories of iron-chalcogenide superconductivity. Our work also reveals a crossover from weak to rapid suppression of $T_c$ as superfluid stiffness decreases, connecting FeTe to the broader phenomenology observed in unconventional superconductors.

cond-mat.supr-con↗

arXiv2026

Interface-Confined Superconductivity with Thickness-Independent Superfluid Stiffness in (Pb,Sn)Te/FeTe Bilayers

Interface-induced superconductivity in FeTe-based heterostructures provides a promising route toward topological superconductivity, yet the roles of the neighboring layers topology, symmetry, and electronic structure remain unresolved. In this work, we employ molecular beam epitaxy to grow Pb1-xSnxTe/FeTe bilayers and use angle-resolved photoemission spectroscopy to track the evolution of the Pb1-xSnxTe layer from a trivial insulator to a topological crystalline insulator hosting multiple Dirac surface states. Electrical transport measurements reveal robust superconductivity throughout the entire composition range, with a nearly constant superconducting transition temperature of ~12 K despite substantial changes in the electronic structure and topology of Pb1-xSnxTe. Double-coil mutual-inductance measurements further reveal comparable superfluid stiffness across the topological phase transition and nearly thickness-independent superfluid stiffness despite large variations in the constituent-layer thicknesses, demonstrating that superconductivity is confined near the interface. These results establish that superconductivity in FeTe-based heterostructures is largely insensitive to the topology, crystal symmetry, and detailed electronic structure of the neighboring layer, supporting a primary origin in modifications to the FeTe layer. The coexistence of interface-confined superconductivity and tunable multiple Dirac surface states in Pb1-xSnxTe/FeTe bilayers provides a versatile platform for exploring topological superconductivity and interactions among multiple Majorana zero modes.

cond-mat.supr-con↗

arXiv2026

Imaging Surface Magnetization in Altermagnetic MnTe Films

Altermagnets with pronounced spin-splitting band structure, unconventional magnetic and crystal symmetries, and exotic magneto-transport properties have received immense interest in cutting-edge spintronics, materials science, and condensed matter physics research. Microscopic imaging of spontaneous magnetic domains and phases in altermagnets constitutes an important step for investigating their underlying material properties, mechanisms, and spin behaviors. Taking advantage of scanning-probe quantum microscopy, here we report nanoscale quantum sensing of a prototypical altermagnet candidate $\alpha$-MnTe. We visualize evanescent magnetization and the associated magnetic domains in epitaxial MnTe films, which allows external magnetic fields to control the intrinsic altermagnetic order and configurations. By evaluating a series of MnTe films with different thicknesses down to the atomic scale, we further present evidence for the interfacial origin of the observed weak magnetization and show its correlation with the anomalous Hall effect in MnTe film. Our results advance the current understanding of emergent altermagnetism, providing insights into future material design of altermagnet-integrated spintronic devices.

cond-mat.mtrl-sci↗

arXiv2026

Designing Magnetic Topological Insulator Trilayers for Highly-Efficient Spin-Orbit Torque Switching

Spin-orbit torque (SOT) enables efficient electrical control of magnetization, offering a pathway towards low-power spintronic devices. Magnetic topological insulators (TIs), with spin-momentum-locked surface states and intrinsic ferromagnetism, provide a unique platform for realizing SOT switching of edge current chirality in quantum anomalous Hall (QAH) insulators. In this work, we employ molecular beam epitaxy to synthesize a series of magnetic TI trilayers with controlled layer thicknesses on heat-treated SrTiO3(111) substrates. Electrical transport measurements reveal that SOT-driven magnetization reversal and the associated switching of edge current chirality are governed by the SrTiO3(111) substrate-induced charging effect, which generates an asymmetric chemical-potential alignment between the top and bottom magnetic TI layers. Furthermore, we demonstrate that the switching polarity and efficiency can be tuned through heterostructure design, gate voltage, and in-plane magnetic field, consistent with SOT symmetry. These findings identify chemical potential asymmetry as the origin of the large SOT switching ratio in magnetic TI trilayers and establish a route for electrical control of edge current chirality in QAH insulators. This work advances the understanding of SOT switching mechanism in magnetic topological materials and paves the way for next-generation, energy-efficient QAH-based logic and memory devices.

cond-mat.mes-hall↗

arXiv2026

Stoichiometric FeTe is a Superconductor

Iron-based superconductors are a fascinating family of materials in which multiple electronic bands and strong antiferromagnetic (AFM) correlations are key ingredients for competing ground states, including antiferromagnetism, electronic nematicity, and unconventional superconductivity. FeTe, unlike its superconducting isostructural counterpart FeSe, has long been regarded as an AFM metal sans superconductivity. In this work, we employ molecular beam epitaxy to grow FeTe films and perform post-growth annealing under a Te flux. By performing spin-polarized scanning tunneling microscopy and spectroscopy, we demonstrate that the AFM order in as-grown FeTe films is induced by interstitial Fe atoms that disrupt the ideal 1:1 stoichiometry. Remarkably, the removal of these interstitial Fe atoms through Te annealing yields stoichiometric FeTe films that show no AFM order and instead exhibit robust superconductivity with a critical temperature of ~13.5K. This superconducting state is further confirmed by the observation of Cooper pair tunneling, zero electrical resistance, and the Meissner effect. Therefore, our results demonstrate that stoichiometric FeTe is inherently a superconductor, overturning a long-held view that it is an AFM metal. This work clarifies the origin of superconductivity in FeTe-based heterostructures and demonstrates the importance of stoichiometry control in understanding the competition between AFM and superconductivity in iron-based superconductors.

cond-mat.supr-con↗

arXiv2026

Moire Engineering of Cooper-Pair Density Modulation States

Cooper-pair density modulation (CPDM) states are superconducting phases in which the order parameter varies periodically in real space without breaking translational symmetry. Recently, moire superlattices in layered materials have emerged as powerful platforms for engineering charge density with tunable lattice symmetry, offering a new route to creating and controlling CPDM states. In this work, we demonstrate moire-induced CPDM states in a bilayer heterostructure formed by epitaxially stacking one quintuple layer (1 QL) of topological insulator Sb2Te3 on a six-unit-cell (6 UC) antiferromagnetic FeTe layer. Scanning tunneling microscopy and spectroscopy (STM/S) measurements reveal a moir\'e superlattice formed between the hexagonal Te lattice of Sb2Te3 and the square Te lattice of FeTe, which spatially modulates the two superconducting gaps of the 1 QL Sb2Te3/6 UC FeTe bilayer. Our Josephson STM/S measurements provide direct real-space imaging of the CPDM states with a wavelength corresponding to the periodicity of the moire superlattice. By substituting Sb2Te3 with Bi2Te3, we achieve control over both the periodicity and magnitude of the CPDM states. Our work demonstrates an epitaxial strategy for synthesizing moire superlattices from materials with different crystal symmetries and reveals a new mechanism for engineering CPDM states in designer bilayer heterostructures.

cond-mat.supr-con↗

arXiv2026

Surface-State-Driven Anomalous Hall Effect in Altermagnetic MnTe Films

Altermagnets have recently emerged as a new class of magnetic materials that combine compensated magnetic order with spin-split electronic band structures. In this work, we employ molecular beam epitaxy to grow MnTe thin films with controlled thickness on InP(111)A substrates. By performing angle-resolved photoemission spectroscopy measurements, we observe a large spin splitting of ~230 meV for bulk bands well below the Fermi level and identify surface states that cross the Fermi level. Electrical transport measurements reveal that a robust anomalous Hall (AH) effect persists down to 2 K and an AH sign reversal occurs near 175 K. By systematically tuning film thickness, growth conditions, and interfacial structure, we demonstrate that the AH response in MnTe films originates from the Berry curvature of surface states rather than from bulk bands. Our first-principles calculations reveal that this surface-state-driven AH effect is imprinted by the bulk altermagnetic order and remains unchanged for terminations with opposite Mn magnetic orientations. Our results establish a unique surface transport probe of bulk altermagnetism, demonstrate interface engineering as an effective route to generate and control the AH effect in altermagnets, and provide a unified understanding of the AH response in altermagentic MnTe films.

cond-mat.mtrl-sci↗

arXiv2024

Towards Robust Surgical Automation via Digital Twin Representations from Foundation Models

Large language model-based (LLM) agents are emerging as a powerful enabler of robust embodied intelligence due to their capability of planning complex action sequences. Sound planning ability is necessary for robust automation in many task domains, but especially in surgical automation. These agents rely on a highly detailed natural language representation of the scene. Thus, to leverage the emergent capabilities of LLM agents for surgical task planning, developing similarly powerful and robust perception algorithms is necessary to derive a detailed scene representation of the environment from visual input. Previous research has focused primarily on enabling LLM-based task planning while adopting simple yet severely limited perception solutions to meet the needs for bench-top experiments, but lacks the critical flexibility to scale to less constrained settings. In this work, we propose an alternate perception approach -- a digital twin (DT)-based machine perception approach that capitalizes on the convincing performance and out-of-the-box generalization of recent vision foundation models. Integrating our DT representation and LLM agent for planning with the dVRK platform, we develop an embodied intelligence system and evaluate its robustness in performing peg transfer and gauze retrieval tasks. Our approach shows strong task performance and generalizability to varied environmental settings. Despite a convincing performance, this work is merely a first step towards the integration of DT representations. Future studies are necessary for the realization of a comprehensive DT framework to improve the interpretability and generalizability of embodied intelligence in surgery.

cs.RO↗