arXiv subjects

Pulickel M. Ajayan

Publications and source records attributed to Pulickel M. Ajayan.

At least 37 records · Page 2Linked to original sources

arXiv2023

Structural, optical, and thermal properties of BN thin films grown on diamond via pulsed laser deposition

Heterostructures based on ultrawide-bandgap (UWBG) semiconductors (bandgap >4.0 eV), boron nitride (BN) and diamond are important for next-generation high-power electronics. However, in-situ hetero-epitaxy of BN/diamond or vice-versa remains extremely challenging, due to their non-trivial growth kinetics. Here, we have grown BN thin film on (100) single crystal diamond by pulsed laser deposition and investigated its structural and magnetic properties, optical refractive index, and thermal conductivity. Structural characterizations confirm the mixed (stable hexagonal and metastable cubic) phase growth. Film shows diamagnetic behavior at room temperature. It displays anisotropic refractive index within the visible-to-near-infrared wavelength range. The room temperature cross-plane thermal conductivity of BN is ~1.53 W/(mK), and the thermal conductance of the BN/diamond interface is ~20 MW/(m2K). Our findings are useful for various device related applications based on UWBG BN/diamond heterostructures.

physics.app-ph↗

arXiv2023

VO2 Phase Change Electrodes in Li-ion Batteries

Use of electrode materials that show phase change behavior and hence drastic changes in electrochemical activity during operation, have not been explored for Li-ion batteries. Here we demonstrate the vanadium oxide (VO2) cathode that undergoes metal-insulator transition due to first-order structural phase transition at accessible temperature of 68°C for battery operation. Using a suitable electrolyte operable across the phase transition range and compatible with vanadium oxide cathodes, we studied the effect of electrode structure change on lithium insertion followed by the electrochemical characteristics above and below the phase transition temperature. The high-temperature VO2 phase shows significantly improved capacitance, enhanced current rate capabilities, improved electrical conductivity and lithium-ion diffusivity compared to the insulating low temperature phase. This opens up new avenues for electrode designs, allowing manipulation of electrochemical reactions around phase transition temperatures, and in particular enhancing electrochemical properties at elevated temperatures contrary to existing classes of battery chemistries that lead to performance deterioration at elevated temperatures.

physics.chem-ph↗

arXiv2023

Bottom-up Integration of TMDCs with Pre-Patterned Device Architectures via Transfer-free Chemical Vapor Deposition

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) remain a topic of immense interest. Specifically, given their low operational switching costs, they find many niche applications in new computing architectures with the promise of continued miniaturization. However, challenges lie in Back End of Line (BEOL) integration temperature and time compliance regarding current requirements for crystal growth. Additionally, deleterious and time-consuming transfer processes and multiple steps involved in channel/contact engineering can cripple device performance. This work demonstrates kinetics-governed in-situ growth regimes (surface or edge growth from gold) of WSe2 and provides a mechanistic understanding of these regimes via energetics across various material interfaces. As a proof-of-concept, field effect transistors (FET) with an in-situ grown WSe2 channel across Au contacts are fabricated, demonstrating a 2D semiconductor transistor via a transfer-free method within the 450-600 C 2h-time window requirement BEOL integration. We leverage directional edge growth to fabricate contacts with robust thickness-dependent Schottky-to-Ohmic behavior. By transitioning between Au and SiO2 growth substrates in situ, this work achieves strain-induced subthreshold swing of 140 mV/decade, relatively high mobility of 107 +- 19 cm2V-1s-1, and robust ON/OFF ratios 10^6 in the fabricated FETs.

cond-mat.mtrl-sci↗

arXiv2023

Phase Stability of Hexagonal/cubic Boron Nitride Nanocomposites

Boron nitride (BN) is an exceptional material and among its polymorphs, two-dimensional (2D) hexagonal and three-dimensional (3D) cubic BN (h-BN and c-BN) phases are most common. The phase stability regimes of these BN phases are still under debate and phase transformations of h-BN/c-BN remain a topic of interest. Here, we investigate the phase stability of 2D/3D h-BN/c-BN nanocomposites and show that the co-existence of two phases can lead to strong non-linear optical properties and low thermal conductivity at room temperature. Furthermore, spark-plasma sintering of the nanocomposite shows complete phase transformation to 2D h-BN with improved crystalline quality, where 3D c-BN grain sizes governs the nucleation and growth kinetics. Our demonstration might be insightful in phase engineering of BN polymorphs based nanocomposites with desirable properties for optoelectronics and thermal energy management applications.

cond-mat.mtrl-sci↗

arXiv2023

Unidirectional domain growth of hexagonal boron nitride thin films

Two-dimensional van der Waals (2D-vdW) layered hexagonal boron nitride (h-BN) has gained tremendous research interest over recent years due to its unconventional domain growth morphology, fascinating properties and application potentials as an excellent dielectric layer for 2D-based nano-electronics. However, the unidirectional domain growth of h-BN thin films directly on insulating substrates remains significantly challenging because of high-bonding anisotropicity and complex growth kinetics than the conventional thin films growth, thus resulting in the formation of randomly oriented domains morphology, and hindering its usefulness in integrated nano-devices. Here, ultra-wide bandgap h-BN thin films are grown directly on low-miscut atomically smooth highly insulating c-plane sapphire substrates (without using any metal catalytic layer) by pulsed laser deposition, showing remarkable unidirectional triangular-shape domains morphology. This unidirectional domain growth is attributed to the step-edge guided nucleation caused by reducing the film-substrate interfacial symmetry and energy, thereby breaking the degeneracy of nucleation sites of random domains, as revealed by the density functional theory (DFT) calculations. Through extensive characterizations, we further demonstrate the excellent single crystal-like functional properties of films. Our findings might pave the way for feasible large-area direct growth of electronic-quality h-BN thin films on insulating substrates for high-performance 2D-electronics, and in addition would be beneficial for hetero engineering of 2D-vdW materials with emergent phenomena.

cond-mat.mtrl-sci↗

arXiv2022

Properties and device performance of BN thin films grown on GaN by pulsed laser deposition

Wide and ultrawide-bandgap semiconductors lie at the heart of next-generation high-power, high-frequency electronics. Here, we report the growth of ultrawide-bandgap boron nitride (BN) thin films on wide-bandgap gallium nitride (GaN) by pulsed laser deposition. Comprehensive spectroscopic (core level and valence band XPS, FTIR, Raman) and microscopic (AFM and STEM) characterizations confirm the growth of BN thin films on GaN. Optically, we observed that BN/GaN heterostructure is second-harmonic generation active. Moreover, we fabricated the BN/GaN heterostructure-based Schottky diode that demonstrates rectifying characteristics, lower turn-on voltage, and an improved breakdown capability (234 V) as compared to GaN (168 V), owing to the higher breakdown electrical field of BN. Our approach is an early step towards bridging the gap between wide and ultrawide-bandgap materials for potential optoelectronics as well as next-generation high-power electronics.

physics.app-ph↗

arXiv2021

Scalable synthesis of 2D van der Waals superlattices

Heterostructure materials form the basis of much of modern electronics, from transistors to lasers and light-emitting diodes. Recent years have seen a renewed focus on creating heterostructures through the vertical integration of two-dimensional materials, including graphene, hexagonal boron nitride, and transition metal dichalcogenides (TMDCs). However, fundamental challenges associated with materials processing have limited material quality and impeded scalability. We demonstrate a method to convert sub-nanometer metal films deposited on silicon and sapphire into TMDC heterostructures through vapor-phase processing. The resulting heterostructures and superlattices exhibit novel properties compared with stand-alone TMDCs, including reduced bandgap, enhanced light-matter coupling, and improved catalytic performance. This robust and scalable synthetic method provides new opportunities to generate a wide range of artificially stacked 2D superlattices with controlled morphology and composition.

cond-mat.mtrl-sci↗

arXiv2021

Generation of Intense Phase-Stable Femtosecond Hard X-ray Pulse Pairs

Coherent nonlinear spectroscopies and imaging in the X-ray domain provide direct insight into the coupled motions of electrons and nuclei with resolution on the electronic length and time scale. The experimental realization of such techniques will strongly benefit from access to intense, coherent pairs of femtosecond X-ray pulses. We have observed phase-stable X-ray pulse pairs containing more thank 3 x 10e7 photons at 5.9 keV (2.1 Angstrom) with about 1 fs duration and 2-5 fs separation. The highly directional pulse pairs are manifested by interference fringes in the superfluorescent and seeded stimulated manganese K-alpha emission induced by an X-ray free-electron laser. The fringes constitute the time-frequency X-ray analogue of the Young double-slit interference allowing for frequency-domain X-ray measurements with attosecond time resolution.

physics.atom-ph↗

arXiv2021

Two-dimensional Cobalt Telluride as Piezo-tribogenerator

Two-dimensional (2D) materials have been shown to be efficient in energy harvesting. Here, we report utilization of waste heat to generate electricity via combined piezoelectric and triboelectric property of 2D Cobalt Telluride (CoTe2). The piezo-triboelectric nanogenerator (PTNG) produced an open-circuit voltage of ~5V under 1N force and the effect of temperature in the 305-363 K range shows a four-fold energy conversion efficiency improvement. The 2D piezo-tribogenerator shows excellent characteristics with a maximum voltage of ~10V, fast response time and high responsivity. Density functional theory was used to gain further insights and validation of the experimental results. Our results could lead to energy harvesting approaches using 2D materials from various thermal sources and dissipated waste heat from electronic devices.

physics.app-ph↗

arXiv2021

Magnetic Field Dependent Piezoelectricity in Atomically Thin Co$_2$Te$_3$

Two dimensional (2D) materials have received a surge in research interest due to their exciting range of properties. Here we show that 2D cobalt telluride (Co2Te3), successfully synthesized via liquid-phase exfoliation in an organic solvent, exhibits weak ferromagnetism and semiconducting behavior at room temperature. The magnetic field-dependent piezoelectric properties of 2D Co2Te3 sample show magneto-electric response of the material and a linear relationship between the output voltage and applied magnetic field. First-principles density functional theory (DFT) and ab initio molecular dynamics are used to explain these experimental results. Our work could pave the way for the development of 2D materials with coupled magnetism and piezoelectricity, leading to new applications in electromagnetics.

physics.app-ph↗

arXiv2021

Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets

Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.

cond-mat.mtrl-sci↗

arXiv2021

A Reactive Molecular Dynamics Study of Hydrogenation on Diamond Surfaces

Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond surfaces to study electronic properties, which is far from the experimentally observed hydrogen coverage. In this work, we have carried out a detailed study using fully atomistic reactive molecular dynamics (MD) simulations on low indices diamond surfaces i.e. (001), (013), (110), (113) and (111) to evaluate the quality and hydrogenation thresholds on different diamond surfaces and their possible effects on electronic properties. Our simulation results indicate that the 100% surface hydrogenation in these surfaces is hard to achieve because of the steric repulsion between the terminated hydrogen atoms. Among all the considered surfaces, the (001), (110), and (113) surfaces incorporate a larger number of hydrogen atoms and passivate the surface dangling bonds. Our results on hydrogen stability also suggest that these surfaces with optimum hydrogen coverage are robust under extreme conditions and could provide homogeneous p-type surface conductivity in the diamond surfaces, a key requirement for high-field, high-frequency device applications.

cond-mat.mtrl-sci↗

arXiv2021

Anisotropic Frictional Response of Texture Induced Strained Graphene

Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene topping can tune the friction force signal by inducing local strain. The present work reports capping of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micron (P= 250 nm). The variation in the pitch lengths induces different strains in graphene revealed by scanning probe techniques, Raman spectroscopy and molecular dynamics (MD) simulation. The asymmetric straining of C-C bonds over the groove architecture is exploited through friction force microscopy in different directions of orthogonal and parallel to groove axis. The presence of graphene lubricates the textured surface by a factor of 10 and periodically dissipated friction force, which was found to be stochastic over the bare surface. For the first time, we presented transformation of the lubrication into an ultra-low friction force by a factor of 20 over the crest scanning parallel to the groove axis. Such anisotropy is found to be insignificant at the bare textured system, clearly demonstrating the strain-dependent regulation of friction force. Our results are applicable for graphene, and other 2D materials covered corrugated structures with movable components such as NEMS, nanoscale gears and robotics.

cond-mat.mtrl-sci↗

arXiv2021

Processing Dynamics of 3D-Printed Carbon Nanotubes-Epoxy Composites

Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here, we demonstrate that 3D printing technique like-direct ink writing offers improved processing of CNTs-polymer composites. The shear-induced flow of an engineered nanocomposite ink through the micronozzle offers some benefits including reducing the number of voids within the epoxy, improving CNTs dispersion and adhesion with epoxy, and partially aligns the CNTs. Such microstructural changes result in superior mechanical performance and heat transfer in the composites compared to their mold-casted counterparts. This work demonstrates the advantages of 3D printing over traditional fabrication methods, beyond the ability to rapidly fabricate complex architectures, to achieve improved processing dynamics for fabricating CNT-polymer nanocomposites with better structural and functional properties.

physics.app-ph↗

arXiv2020

Three-dimensional Printing of Complex Graphite Structures

Graphite, with many industrial applications, is one of the widely sought-after allotropes of carbon. The sp2 hybridized and thermodynamically stable form of carbon forms a layered structure with strong in-plane carbon bonds and weak inter-layer van der Waals bonding. Graphite is also a high-temperature ceramic, and shaping them into complex geometries is challenging, given its limited sintering behavior even at high temperatures. Although the geometric design of the graphite structure in many of the applications could dictate its precision performance, conventional synthesis methods for formulating complex geometric graphite shapes are limited due to the intrinsic brittleness and difficulties of high-temperature processing. Here, we report the development of colloidal graphite ink from commercial graphite powders with reproducible rheological behavior that allows the fabrication of any complex architectures with tunable geometry and directionality via 3D printing at room temperature. The method is enabled via using small amounts of clay, another layered material, as an additive, allowing the proper design of the graphene ink and subsequent binding of graphite platelets during printing. Sheared layers of clay are easily able to flow, adapt, and interface with graphite layers forming strong binding between the layers and between particles that make the larger structures. The direct ink printing of complex 3D architectures of graphite without further heat treatments could lead to easy shape engineering and related applications of graphite at various length scales, including complex graphite molds or crucibles. The 3D printed complex graphitic structures exhibit excellent thermal, electrical, and mechanical properties, and the clay additive does not seem to alter these properties due to the excellent inter-layer dispersion and mixing within the graphite material.

cond-mat.mtrl-sci↗

arXiv2020

Corrosion Resistance of Sulfur-Selenium Alloy Coatings

Despite decades of research, metallic corrosion remains a long-standing challenge in many engineering applications. Specifically, designing a material that can resist corrosion both in abiotic as well as biotic environments remains elusive. Here we design a lightweight sulfur-selenium (S-Se) alloy with high stiffness and ductility that can serve as a universal corrosion-resistant coating with protection efficiency of ~99.9% for steel in a wide range of diverse environments. S-Se coated mild steel shows a corrosion rate that is 6-7 orders of magnitude lower than bare metal in abiotic (simulated seawater and sodium sulfate solution) and biotic (sulfate-reducing bacterial medium) environments. The coating is strongly adhesive and mechanically robust. We attribute the high corrosion resistance of the alloy in diverse environments to its semi-crystalline, non-porous, anti-microbial, and viscoelastic nature with superior mechanical performance, enabling it to successfully block a variety of diffusing species.

cond-mat.mtrl-sci↗

arXiv2020

U-carbon: metallic and magnetic

We report the discovery of a pristine crystalline 3D carbon that is magnetic, electrically conductive and stable under ambient conditions. This carbon material, which has remained elusive for decades, is synthesized by using the chemical vapor deposition (CVD) technique with a particular organic molecular precursor 3,3-dimethyl-1-butene (C6H12). An exhaustive computational search of the potential energy surface reveals its unique sp2-sp3 hybrid bonding topology. Synergistic studies involving a large number of experimental techniques and multi-scale first-principles calculations reveal the origin of its novel properties due to the special arrangement of sp2 carbon atoms in lattice. The discovery of this U-carbon, named such because of its unusual structure and properties, can open a new chapter in carbon science.

cond-mat.mtrl-sci↗

arXiv2020

Zeolite-inspired 3d printed structures with enhanced mechanical properties

Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.

physics.app-ph↗