arXiv subjects

Pulkit Nahata

Publications and source records attributed to Pulkit Nahata.

7 recordsLinked to original sources

arXiv2025

On the Flexibility Potential of a Swiss Distribution Grid: Opportunities and Limitations

The growing integration of distributed renewable generation and the electrification of heating and transportation are rapidly increasing the number of flexible devices within modern distribution grids. Leveraging the aggregated flexibility of these small-scale distributed resources is essential to maintaining future grid-wide stability. This work uses the Swiss distribution grid of Walenstadt as a case study to provide insights into the aggregated flexibility potential of distribution grids. It demonstrates that incorporating devices such as heat pumps and photovoltaic systems significantly enhances distribution grid flexibility. It investigates the time-varying nature of aggregated flexibility and highlights how it can vary seasonally. Furthermore, simulations of future scenarios reveal that aggregated flexibility does not increase linearly or monotonically with higher levels of flexible device penetration. This is primarily due to the overloading of individual feeders, which underscores the impact of grid topology and network constraints on the aggregated flexibility potential.

eess.SY↗

arXiv2021

Bayesian Error-in-Variables Models for the Identification of Power Networks

The increasing integration of intermittent renewable generation, especially at the distribution level,necessitates advanced planning and optimisation methodologies contingent on the knowledge of thegrid, specifically the admittance matrix capturing the topology and line parameters of an electricnetwork. However, a reliable estimate of the admittance matrix may either be missing or quicklybecome obsolete for temporally varying grids. In this work, we propose a data-driven identificationmethod utilising voltage and current measurements collected from micro-PMUs. More precisely,we first present a maximum likelihood approach and then move towards a Bayesian framework,leveraging the principles of maximum a posteriori estimation. In contrast with most existing con-tributions, our approach not only factors in measurement noise on both voltage and current data,but is also capable of exploiting available a priori information such as sparsity patterns and knownline parameters. Simulations conducted on benchmark cases demonstrate that, compared to otheralgorithms, our method can achieve significantly greater accuracy.

eess.SY↗

arXiv2021

Identification of AC Networks via Online Learning

The increasing penetration of intermittent distributed energy resources in power networks calls for novel planning and control methodologies which hinge on detailed knowledge of the grid. However, reliable information concerning the system topology and parameters may be missing or outdated for temporally varying electric distribution networks. This paper proposes an online learning procedure to estimate the network admittance matrix capturing topological information and line parameters. We start off by providing a recursive identification algorithm exploiting phasor measurements of voltages and currents. With the goal of accelerating convergence, we subsequently complement our base algorithm with a design-of-experiment procedure which maximizes the information content of data at each step by computing optimal voltage excitations. Our approach improves on existing techniques, and its effectiveness is substantiated by numerical studies on realistic testbeds.

eess.SY↗

arXiv2021

A Unified Passivity-Based Framework for Control of Modular Islanded AC Microgrids

Voltage and frequency control in an islanded AC microgrid (ImGs) amount to stabilizing an a priori unknown ImG equilibrium induced by loads and changes in topology. This paper puts forth a unified control framework which, while guaranteeing such stability, allows for modular ImGs interconnecting multiple subsystems, that is, dynamic RLC lines, nonlinear constant impedance, current, power (ZIP) and exponential (EXP) loads, and inverter-based distributed generation units (DGUs) controlled with different types of primary controllers. The underlying idea of the framework is based one equilibrium-independent passivity (EIP) of the ImG subsystems, which enables stability certificates of ImG equilibria without their explicit knowledge. In order to render DGUs EIP, we propose a decentralized controller synthesis algorithm based on port-Hamiltonian systems (PHSs). We also show that EIP, being the key to stability, provides a general framework which can embrace other solutions available in the literature. Furthermore, we provide a novel argument based on LaSalle's theorem for proving asymptotic voltage and frequency stability. Finally, we analyze the impact of actuator saturation on the stability results by exploiting the inherent EIP properties of the PHS DGU model. Theoretical findings are backed up by realistic simulations based on the CIGRE benchmark for medium voltage networks.

eess.SY↗

arXiv2020

Hierarchical Control in Islanded DC Microgrids with Flexible Structures

Hierarchical architectures stacking primary, secondary, and tertiary layers are widely employed for the operation and control of islanded DC microgrids (DCmGs), composed of Distribution Generation Units (DGUs), loads, and power lines. However, a comprehensive analysis of all the layers put together is often missing. In this work, we remedy this limitation by setting out a top-to-bottom hierarchical control architecture. Decentralized voltage controllers attached to DGUs form our primary layer. Governed by an MPC--based Energy Management System (EMS), our tertiary layer generates optimal power references and decision variables for DGUs. In particular, decision variables can turn DGUs ON/OFF and select their operation modes. An intermediary secondary layer translates EMS power references into appropriate voltage signals required by the primary layer. More specifically, to provide a voltage solution, the secondary layer solves an optimization problem embedding power-flow equations shown to be always solvable. Since load voltages are not directly enforced, their uniqueness is necessary for DGUs to produce reference powers handed down by the EMS. To this aim, we deduce a novel uniqueness condition based only on local load parameters. Our control framework, besides being applicable for generic DCmG topologies, can accommodate topological changes caused by EMS commands. Its functioning is validated via simulations on a modified 16-bus DC system.

eess.SY↗

arXiv2020

Consensus-Based Current Sharing and Voltage Balancing in DC Microgrids with Exponential Loads

In this work, we present a novel consensus-based secondary control scheme for current sharing and voltage balancing in DC microgrids, composed of distributed generation units, dynamic RLC lines, and nonlinear ZIE (constant impedance, constant current, and exponential) loads. Situated atop a primary voltage control layer, our secondary controllers have a distributed structure, and utilize information exchanged over a communication network to compute necessary control actions. Besides showing that the desired objectives are always attained in steady state, we deduce sufficient conditions for the existence and uniqueness of an equilibrium point for constant power loads -- E loads with zero exponent. Our control design hinges only on the local parameters of the generation units, facilitating plug-and-play operations. We provide a voltage stability analysis, and illustrate the performance and robustness of our designs via simulations. All results hold for arbitrary, albeit connected, microgrid and communication network topologies.

eess.SY↗

arXiv2020

On Existence of Equilibria, Voltage Balancing, and Current Sharing in Consensus-Based DC Microgrids

In this work, we present new secondary regulators for current sharing and voltage balancing in DC microgrids, composed of distributed generation units, dynamic RLC lines, and nonlinear ZIP (constant impedance, constant current, and constant power) loads. The proposed controllers sit atop a primary voltage control layer, and exchange information over a communication network to perform secondary control actions. We deduce sufficient conditions for the existence and uniqueness of an equilibrium point, and show that the desired objectives are attained in steady state. Our control design requires only the knowledge of local parameters of the generation units, facilitating plug-and-play operations. We provide a voltage stability analysis, and illustrate the performance and robustness of our designs via simulations. All results hold for arbitrary, albeit connected, microgrid and communication network topologies.

eess.SY↗