Searcharxiv⌕ Search

arXiv subjects

Qi Qian

Publications and source records attributed to Qi Qian.

69 records · Page 4Linked to original sources

Neural Architecture Design for GPU-Efficient Networks

Many mission-critical systems are based on GPU for inference. It requires not only high recognition accuracy but also low latency in responding time. Although many studies are devoted to optimizing the structure of deep models for efficient inference, most of them do not leverage the architecture of \textbf{modern GPU} for fast inference, leading to suboptimal performance. To address this issue, we propose a general principle for designing GPU-efficient networks based on extensive empirical studies. This design principle enables us to search for GPU-efficient network structures effectively by a simple and lightweight method as opposed to most Neural Architecture Search (NAS) methods that are complicated and computationally expensive. Based on the proposed framework, we design a family of GPU-Efficient Networks, or GENets in short. We did extensive evaluations on multiple GPU platforms and inference engines. While achieving $\geq 81.3\%$ top-1 accuracy on ImageNet, GENet is up to $6.4$ times faster than EfficienNet on GPU. It also outperforms most state-of-the-art models that are more efficient than EfficientNet in high precision regimes. Our source code and pre-trained models are available from \url{https://github.com/idstcv/GPU-Efficient-Networks}.

cs.CV↗

SoftTriple Loss: Deep Metric Learning Without Triplet Sampling

Distance metric learning (DML) is to learn the embeddings where examples from the same class are closer than examples from different classes. It can be cast as an optimization problem with triplet constraints. Due to the vast number of triplet constraints, a sampling strategy is essential for DML. With the tremendous success of deep learning in classifications, it has been applied for DML. When learning embeddings with deep neural networks (DNNs), only a mini-batch of data is available at each iteration. The set of triplet constraints has to be sampled within the mini-batch. Since a mini-batch cannot capture the neighbors in the original set well, it makes the learned embeddings sub-optimal. On the contrary, optimizing SoftMax loss, which is a classification loss, with DNN shows a superior performance in certain DML tasks. It inspires us to investigate the formulation of SoftMax. Our analysis shows that SoftMax loss is equivalent to a smoothed triplet loss where each class has a single center. In real-world data, one class can contain several local clusters rather than a single one, e.g., birds of different poses. Therefore, we propose the SoftTriple loss to extend the SoftMax loss with multiple centers for each class. Compared with conventional deep metric learning algorithms, optimizing SoftTriple loss can learn the embeddings without the sampling phase by mildly increasing the size of the last fully connected layer. Experiments on the benchmark fine-grained data sets demonstrate the effectiveness of the proposed loss function. Code is available at https://github.com/idstcv/SoftTriple

cs.CV↗

DR Loss: Improving Object Detection by Distributional Ranking

Most of object detection algorithms can be categorized into two classes: two-stage detectors and one-stage detectors. Recently, many efforts have been devoted to one-stage detectors for the simple yet effective architecture. Different from two-stage detectors, one-stage detectors aim to identify foreground objects from all candidates in a single stage. This architecture is efficient but can suffer from the imbalance issue with respect to two aspects: the inter-class imbalance between the number of candidates from foreground and background classes and the intra-class imbalance in the hardness of background candidates, where only a few candidates are hard to be identified. In this work, we propose a novel distributional ranking (DR) loss to handle the challenge. For each image, we convert the classification problem to a ranking problem, which considers pairs of candidates within the image, to address the inter-class imbalance problem. Then, we push the distributions of confidence scores for foreground and background towards the decision boundary. After that, we optimize the rank of the expectations of derived distributions in lieu of original pairs. Our method not only mitigates the intra-class imbalance issue in background candidates but also improves the efficiency for the ranking algorithm. By merely replacing the focal loss in RetinaNet with the developed DR loss and applying ResNet-101 as the backbone, mAP of the single-scale test on COCO can be improved from 39.1% to 41.7% without bells and whistles, which demonstrates the effectiveness of the proposed loss function. Code is available at \url{https://github.com/idstcv/DR_loss}.

cs.CV↗

Hierarchically Robust Representation Learning

With the tremendous success of deep learning in visual tasks, the representations extracted from intermediate layers of learned models, that is, deep features, attract much attention of researchers. Previous empirical analysis shows that those features can contain appropriate semantic information. Therefore, with a model trained on a large-scale benchmark data set (e.g., ImageNet), the extracted features can work well on other tasks. In this work, we investigate this phenomenon and demonstrate that deep features can be suboptimal due to the fact that they are learned by minimizing the empirical risk. When the data distribution of the target task is different from that of the benchmark data set, the performance of deep features can degrade. Hence, we propose a hierarchically robust optimization method to learn more generic features. Considering the example-level and concept-level robustness simultaneously, we formulate the problem as a distributionally robust optimization problem with Wasserstein ambiguity set constraints, and an efficient algorithm with the conventional training pipeline is proposed. Experiments on benchmark data sets demonstrate the effectiveness of the robust deep representations.

cs.CV↗

Robust Gaussian Process Regression for Real-Time High Precision GPS Signal Enhancement

Satellite-based positioning system such as GPS often suffers from large amount of noise that degrades the positioning accuracy dramatically especially in real-time applications. In this work, we consider a data-mining approach to enhance the GPS signal. We build a large-scale high precision GPS receiver grid system to collect real-time GPS signals for training. The Gaussian Process (GP) regression is chosen to model the vertical Total Electron Content (vTEC) distribution of the ionosphere of the Earth. Our experiments show that the noise in the real-time GPS signals often exceeds the breakdown point of the conventional robust regression methods resulting in sub-optimal system performance. We propose a three-step approach to address this challenge. In the first step we perform a set of signal validity tests to separate the signals into clean and dirty groups. In the second step, we train an initial model on the clean signals and then reweigting the dirty signals based on the residual error. A final model is retrained on both the clean signals and the reweighted dirty signals. In the theoretical analysis, we prove that the proposed three-step approach is able to tolerate much higher noise level than the vanilla robust regression methods if two reweighting rules are followed. We validate the superiority of the proposed method in our real-time high precision positioning system against several popular state-of-the-art robust regression methods. Our method achieves centimeter positioning accuracy in the benchmark region with probability $78.4\%$ , outperforming the second best baseline method by a margin of $8.3\%$. The benchmark takes 6 hours on 20,000 CPU cores or 14 years on a single CPU.

stat.ML↗

Which Factorization Machine Modeling is Better: A Theoretical Answer with Optimal Guarantee

Factorization machine (FM) is a popular machine learning model to capture the second order feature interactions. The optimal learning guarantee of FM and its generalized version is not yet developed. For a rank $k$ generalized FM of $d$ dimensional input, the previous best known sampling complexity is $\mathcal{O}[k^{3}d\cdot\mathrm{polylog}(kd)]$ under Gaussian distribution. This bound is sub-optimal comparing to the information theoretical lower bound $\mathcal{O}(kd)$. In this work, we aim to tighten this bound towards optimal and generalize the analysis to sub-gaussian distribution. We prove that when the input data satisfies the so-called $τ$-Moment Invertible Property, the sampling complexity of generalized FM can be improved to $\mathcal{O}[k^{2}d\cdot\mathrm{polylog}(kd)/τ^{2}]$. When the second order self-interaction terms are excluded in the generalized FM, the bound can be improved to the optimal $\mathcal{O}[kd\cdot\mathrm{polylog}(kd)]$ up to the logarithmic factors. Our analysis also suggests that the positive semi-definite constraint in the conventional FM is redundant as it does not improve the sampling complexity while making the model difficult to optimize. We evaluate our improved FM model in real-time high precision GPS signal calibration task to validate its superiority.

stat.ML↗

Robust Optimization over Multiple Domains

In this work, we study the problem of learning a single model for multiple domains. Unlike the conventional machine learning scenario where each domain can have the corresponding model, multiple domains (i.e., applications/users) may share the same machine learning model due to maintenance loads in cloud computing services. For example, a digit-recognition model should be applicable to hand-written digits, house numbers, car plates, etc. Therefore, an ideal model for cloud computing has to perform well at each applicable domain. To address this new challenge from cloud computing, we develop a framework of robust optimization over multiple domains. In lieu of minimizing the empirical risk, we aim to learn a model optimized to the adversarial distribution over multiple domains. Hence, we propose to learn the model and the adversarial distribution simultaneously with the stochastic algorithm for efficiency. Theoretically, we analyze the convergence rate for convex and non-convex models. To our best knowledge, we first study the convergence rate of learning a robust non-convex model with a practical algorithm. Furthermore, we demonstrate that the robustness of the framework and the convergence rate can be further enhanced by appropriate regularizers over the adversarial distribution. The empirical study on real-world fine-grained visual categorization and digits recognition tasks verifies the effectiveness and efficiency of the proposed framework.

cs.LG↗

Large-scale Distance Metric Learning with Uncertainty

Distance metric learning (DML) has been studied extensively in the past decades for its superior performance with distance-based algorithms. Most of the existing methods propose to learn a distance metric with pairwise or triplet constraints. However, the number of constraints is quadratic or even cubic in the number of the original examples, which makes it challenging for DML to handle the large-scale data set. Besides, the real-world data may contain various uncertainty, especially for the image data. The uncertainty can mislead the learning procedure and cause the performance degradation. By investigating the image data, we find that the original data can be observed from a small set of clean latent examples with different distortions. In this work, we propose the margin preserving metric learning framework to learn the distance metric and latent examples simultaneously. By leveraging the ideal properties of latent examples, the training efficiency can be improved significantly while the learned metric also becomes robust to the uncertainty in the original data. Furthermore, we can show that the metric is learned from latent examples only, but it can preserve the large margin property even for the original data. The empirical study on the benchmark image data sets demonstrates the efficacy and efficiency of the proposed method.

cs.LG↗

Quantum Lifetime in Ultra-High Quality GaAs Quantum Wells: Relationship to $Δ_{5/2}$ and Impact of Density Fluctuations

We consider quantum lifetime derived from low-field Shubnikov-de Haas oscillations as a metric of quality of the two-dimensional electron gas in GaAs quantum wells that expresses large excitation gaps in the fractional quantum Hall states of the N=1 Landau level. Analysis indicates two salient features: 1) small density inhomogeneities dramatically impact the amplitude of Shubnikov-de Haas oscillations such that the canonical method (cf. Coleridge, Phys. Rev. B \textbf{44}, 3793) for determination of quantum lifetime substantially underestimates $τ_q$ unless density inhomogeneity is explicitly considered; 2) $τ_q$ does not correlate well with quality as measured by $Δ_{5/2}$, the excitation gap of the fractional quantum Hall state at 5/2 filling.

cond-mat.mes-hall↗

High temperature resistivity measured at ν = 5/2 as a predictor of 2DEG quality in the N=1 Landau level

We report a high temperature (T = 0.3K) indicator of the excitation gap $Δ_{5/2}$ at the filling factor $ ν=5/2$ fractional quantum Hall state in ultra-high quality AlGaAs/GaAs two-dimensional electron gases. As the lack of correlation between mobility $μ$ and $Δ_{5/2}$ has been well established in previous experiments, we define, analyze and discuss the utility of a different metric $ρ_{5/2}$, the resistivity at $ν=5/2$, as a high temperature predictor of $Δ_{5/2}$. This high-field resistivity reflects the scattering rate of composite fermions. Good correlation between $ρ_{5/2}$ and $Δ_{5/2}$ is observed in both a density tunable device and in a series of identically structured wafers with similar density but vastly different mobility. This correlation can be explained by the fact that both $ρ_{5/2}$ and $Δ_{5/2}$ are sensitive to long-range disorder from remote impurities, while $μ$ is sensitive primarily to disorder localized near the quantum well.

cond-mat.mes-hall↗

Similarity Learning via Adaptive Regression and Its Application to Image Retrieval

We study the problem of similarity learning and its application to image retrieval with large-scale data. The similarity between pairs of images can be measured by the distances between their high dimensional representations, and the problem of learning the appropriate similarity is often addressed by distance metric learning. However, distance metric learning requires the learned metric to be a PSD matrix, which is computational expensive and not necessary for retrieval ranking problem. On the other hand, the bilinear model is shown to be more flexible for large-scale image retrieval task, hence, we adopt it to learn a matrix for estimating pairwise similarities under the regression framework. By adaptively updating the target matrix in regression, we can mimic the hinge loss, which is more appropriate for similarity learning problem. Although the regression problem can have the closed-form solution, the computational cost can be very expensive. The computational challenges come from two aspects: the number of images can be very large and image features have high dimensionality. We address the first challenge by compressing the data by a randomized algorithm with the theoretical guarantee. For the high dimensional issue, we address it by taking low rank assumption and applying alternating method to obtain the partial matrix, which has a global optimal solution. Empirical studies on real world image datasets (i.e., Caltech and ImageNet) demonstrate the effectiveness and efficiency of the proposed method.

cs.LG↗

Towards Making High Dimensional Distance Metric Learning Practical

In this work, we study distance metric learning (DML) for high dimensional data. A typical approach for DML with high dimensional data is to perform the dimensionality reduction first before learning the distance metric. The main shortcoming of this approach is that it may result in a suboptimal solution due to the subspace removed by the dimensionality reduction method. In this work, we present a dual random projection frame for DML with high dimensional data that explicitly addresses the limitation of dimensionality reduction for DML. The key idea is to first project all the data points into a low dimensional space by random projection, and compute the dual variables using the projected vectors. It then reconstructs the distance metric in the original space using the estimated dual variables. The proposed method, on one hand, enjoys the light computation of random projection, and on the other hand, alleviates the limitation of most dimensionality reduction methods. We verify both empirically and theoretically the effectiveness of the proposed algorithm for high dimensional DML.

cs.LG↗

Fine-Grained Visual Categorization via Multi-stage Metric Learning

Fine-grained visual categorization (FGVC) is to categorize objects into subordinate classes instead of basic classes. One major challenge in FGVC is the co-occurrence of two issues: 1) many subordinate classes are highly correlated and are difficult to distinguish, and 2) there exists the large intra-class variation (e.g., due to object pose). This paper proposes to explicitly address the above two issues via distance metric learning (DML). DML addresses the first issue by learning an embedding so that data points from the same class will be pulled together while those from different classes should be pushed apart from each other; and it addresses the second issue by allowing the flexibility that only a portion of the neighbors (not all data points) from the same class need to be pulled together. However, feature representation of an image is often high dimensional, and DML is known to have difficulty in dealing with high dimensional feature vectors since it would require $\mathcal{O}(d^2)$ for storage and $\mathcal{O}(d^3)$ for optimization. To this end, we proposed a multi-stage metric learning framework that divides the large-scale high dimensional learning problem to a series of simple subproblems, achieving $\mathcal{O}(d)$ computational complexity. The empirical study with FVGC benchmark datasets verifies that our method is both effective and efficient compared to the state-of-the-art FGVC approaches.

cs.CV↗

Gate-tunable high mobility remote-doped InSb/In_{1-x}Al_{x}Sb quantum well heterostructures

Gate-tunable high-mobility InSb/In_{1-x}Al_{x}Sb quantum wells (QWs) grown on GaAs substrates are reported. The QW two-dimensional electron gas (2DEG) channel mobility in excess of 200,000 cm^{2}/Vs is measured at T=1.8K. In asymmetrically remote-doped samples with an HfO_{2} gate dielectric formed by atomic layer deposition, parallel conduction is eliminated and complete 2DEG channel depletion is reached with minimal hysteresis in gate bias response of the 2DEG electron density. The integer quantum Hall effect with Landau level filling factor down to 1 is observed. A high-transparency non-alloyed Ohmic contact to the 2DEG with contact resistance below 1Ω \cdot mm is achieved at 1.8K.

cond-mat.mes-hall↗

Efficient Distance Metric Learning by Adaptive Sampling and Mini-Batch Stochastic Gradient Descent (SGD)

Distance metric learning (DML) is an important task that has found applications in many domains. The high computational cost of DML arises from the large number of variables to be determined and the constraint that a distance metric has to be a positive semi-definite (PSD) matrix. Although stochastic gradient descent (SGD) has been successfully applied to improve the efficiency of DML, it can still be computationally expensive because in order to ensure that the solution is a PSD matrix, it has to, at every iteration, project the updated distance metric onto the PSD cone, an expensive operation. We address this challenge by developing two strategies within SGD, i.e. mini-batch and adaptive sampling, to effectively reduce the number of updates (i.e., projections onto the PSD cone) in SGD. We also develop hybrid approaches that combine the strength of adaptive sampling with that of mini-batch online learning techniques to further improve the computational efficiency of SGD for DML. We prove the theoretical guarantees for both adaptive sampling and mini-batch based approaches for DML. We also conduct an extensive empirical study to verify the effectiveness of the proposed algorithms for DML.

cs.LG↗