arXiv subjects

Qiangqiang Huang

Publications and source records attributed to Qiangqiang Huang.

11 recordsLinked to original sources

arXiv2025

Proper Characterization of Heat-to-Electric Conversion Efficiency of Liquid Thermogalvanic Cells

Liquid thermogalvanic cells (LTCs) have emerged as a promising technology for harvesting low-grade heat due to their low cost, compact design, and high thermopower. However, discrepancies exist in quantifying their output power and efficiency. The commonly used figure of merit, ZT = S^2σT/k, is based on electrolyte properties but fails to account for electrochemical reaction kinetics at the electrode interface that significantly impact performance and losses. This work establishes an experimental protocol for accurately characterizing LTC efficiency. We propose a device-level figure of merit, ZT = S^2T/RK , where R and K represent total internal resistance and thermal conductance. This formulation, derived by linearizing the Butler-Volmer relation, incorporates irreversible losses such as mass transfer and activation overpotential. Different methods for assessing LTC output power are examined, including linear sweeping voltammetry (LSV), constant resistance discharging, and constant current step discharging. LSV tends to overestimate power due to transient effects, while the latter two methods provide more accurate steady-state measurements. Additionally, heat conduction across LTCs is carefully analyzed, highlighting the significant impact of natural convection within electrolytes. Through rigorous experimental characterization, we demonstrate that the modified figure of merit is a proper efficiency indicator at the steady-state.

physics.app-ph↗

arXiv2025

Heat Conduction and Thermal Switching Performance of Surface Plasmon Polaritons in Ag2Se Quantum Dot Composite Polymer Film

To stabilize the working temperature of an equipment, a solid-state thermal resistor is usually a requisite, which could adjust its heat conductance continuously according to the temperature. In this work, the thermal conductivity and the thermal switching performances of surface plasmon polaritons in the polymer films filled with Ag2Se quantum dots (QDs) were theoretically analyzed, and a theoretical model was also derived to reveal the dependence of the thermal conductivity on the temperature and the structure of a composite film, which is verified to be effective by numerical calculations. It shows that the thermal conductivity will decrease following ~t-3exp(ζ/Td) rule under the thin film limit, here t, d and T are film thickness, diameter of QDs and temperature, respectively, and ζ is a constant. A high thermal conductivity could be only realized at a device with a size lager than millimeter scale, due to the need of avoiding boundary scatterings of surface plasmon polaritons (SPPs). At the millimeter scale, the thermal conductivity could be reduced by 100 times by increasing temperature from 300 to 400 K, which suggests a very high thermal switching ratio almost in all kinds of solid-state thermal resistor. This study brings new insights in designing thermal resistor and understanding heat conduction in films by adjusting its structures.

cond-mat.mes-hall↗

arXiv2024

Thermodynamics of Ionic Thermoelectrics for Low-Grade Heat Harvesting

More than half of the waste heat rejected into the environment has temperatures lower than 100 $^\circ C$, which accounts for nearly 85 PWh/year worldwide. Efficiently harvesting low-grade heat could be a promising step toward carbon neutrality. Recent developments of ionic thermoelectrics (i-TE) with giant thermopower have provoked intensive interest in using ions as energy and charge carriers for efficient thermal energy harvesting. However, current literature primarily focuses on improving thermopower only, while the ion transport and thermodynamics affecting the efficiencies have been largely neglected. This review article clarifies the fundamentals of electrochemistry and thermodynamics for developing highly efficient i-TE devices. Two major types of i-TE devices, thermo-ionic capacitors (TIC) and thermogalvanic cells (TGC), are discussed in detail. The article analyzes the methods of enhancing ionic thermopower in the literature by taking an entropic point of view. We also derived modified thermoelectric factor Z for both TICs and TGCs that fully incorporate the dynamics of ion transport and electrochemical reactions. Recent developments of hybrid devices showing improved efficiencies, power density, and multifunctionality are reviewed. Finally, we comment on the remaining challenges and provide an outlook on future directions.

physics.chem-ph↗

arXiv2023

GAPSLAM: Blending Gaussian Approximation and Particle Filters for Real-Time Non-Gaussian SLAM

Inferring the posterior distribution in SLAM is critical for evaluating the uncertainty in localization and mapping, as well as supporting subsequent planning tasks aiming to reduce uncertainty for safe navigation. However, real-time full posterior inference techniques, such as Gaussian approximation and particle filters, either lack expressiveness for representing non-Gaussian posteriors or suffer from performance degeneracy when estimating high-dimensional posteriors. Inspired by the complementary strengths of Gaussian approximation and particle filters$\unicode{x2013}$scalability and non-Gaussian estimation, respectively$\unicode{x2013}$we blend these two approaches to infer marginal posteriors in SLAM. Specifically, Gaussian approximation provides robot pose distributions on which particle filters are conditioned to sample landmark marginals. In return, the maximum a posteriori point among these samples can be used to reset linearization points in the nonlinear optimization solver of the Gaussian approximation, facilitating the pursuit of global optima. We demonstrate the scalability, generalizability, and accuracy of our algorithm for real-time full posterior inference on realworld range-only SLAM and object-based bearing-only SLAM datasets.

cs.RO↗

arXiv2023

Optimizing Fiducial Marker Placement for Improved Visual Localization

Adding fiducial markers to a scene is a well-known strategy for making visual localization algorithms more robust. Traditionally, these marker locations are selected by humans who are familiar with visual localization techniques. This paper explores the problem of automatic marker placement within a scene. Specifically, given a predetermined set of markers and a scene model, we compute optimized marker positions within the scene that can improve accuracy in visual localization. Our main contribution is a novel framework for modeling camera localizability that incorporates both natural scene features and artificial fiducial markers added to the scene. We present optimized marker placement (OMP), a greedy algorithm that is based on the camera localizability framework. We have also designed a simulation framework for testing marker placement algorithms on 3D models and images generated from synthetic scenes. We have evaluated OMP within this testbed and demonstrate an improvement in the localization rate by up to 20 percent on four different scenes.

cs.CV↗

arXiv2023

Effect of solvation shell structure on thermopower of liquid redox pairs

Recent advancements in thermogalvanic batteries offer a promising route to efficient harvesting of low-grade heat with temperatures below 100 °C. The thermogalvanic temperature coefficient α, usually referred to as effective thermopower, is the key parameter determining the power density and efficiency of thermogalvanic batteries. However, the current understanding of improving α of redox pairs remains at the phenomenological level without microscopic insights, and the development of electrolytes with high α largely relies on experimental trial and error. This work applies the free energy perturbation method based on molecular dynamics simulations to predict the α of the {Fe^{3+}/Fe^{2+}} redox pair in aqueous and acetone solutions. We showed that α of the {Fe^{3+}/Fe^{2+}} redox pair can be increased from 1.5{\pm}0.3 mV/K to 4.1{\pm}0.4 mV/K with the increased acetone to water fraction. The predicted α of {Fe^{3+}/Fe^{2+}} both in pure water and acetone show excellent agreement with experimental values. By monitoring the fluctuation of dipole orientations in the first solvation shell, we discovered a significant change in the variance of solvent dipole orientation between Fe^{3+} and Fe^{2+}, which can be a microscopic indicator for large magnitudes of α. The effect of acetone weight fraction in the mixed acetone-water solvent on the α of {Fe^{3+}/Fe^{2+}} is also studied. Acetone molecules are found to intercalate into the first solvation shell of the {Fe^{2+}} ion at high acetone fractions, while this phenomenon is not observed in the solvation shell of the Fe^{3+} ion. Such solvation shell structure change of {Fe^{2+}} ions contributes to the enhanced α at high acetone fractions. Our discovery provides atomistic insights into how solvation shell order can be leveraged to develop electrolytes with high thermopower.

physics.chem-ph↗

arXiv2022

Nested Sampling for Non-Gaussian Inference in SLAM Factor Graphs

We present nested sampling for factor graphs (NSFG), a novel nested sampling approach to approximate inference for posterior distributions expressed over factor-graphs. Performing such inference is a key step in simultaneous localization and mapping (SLAM). Although the Gaussian approximation often works well, in other more challenging SLAM situations, the posterior distribution is non-Gaussian and cannot be explicitly represented with standard distributions. Our technique applies to settings where the posterior distribution is substantially non-Gaussian (e.g., multi-modal) and thus needs a more expressive representation. NSFG exploits nested sampling methods to directly sample the posterior to represent the distribution without parametric density models. While nested sampling methods are known for their powerful capability in sampling multi-modal distributions, the application of the methods to SLAM factor graphs is not straightforward. NSFG leverages the structure of factor graphs to construct informative prior distributions which are efficiently sampled and provide notable computational benefits for nested sampling methods. We present simulated experiments which demonstrate that NSFG is more robust and computes solutions over an order of magnitude faster than state-of-the-art sampling techniques. Similarly, we compare NSFG to state-of-the-art Gaussian and non-Gaussian SLAM approaches and demonstrate that NSFG is notably more robust in describing non-Gaussian posteriors.

cs.RO↗

arXiv2022

Incremental Non-Gaussian Inference for SLAM Using Normalizing Flows

This paper presents normalizing flows for incremental smoothing and mapping (NF-iSAM), a novel algorithm for inferring the full posterior distribution in SLAM problems with nonlinear measurement models and non-Gaussian factors. NF-iSAM exploits the expressive power of neural networks, and trains normalizing flows to model and sample the full posterior. By leveraging the Bayes tree, NF-iSAM enables efficient incremental updates similar to iSAM2, albeit in the more challenging non-Gaussian setting. We demonstrate the advantages of NF-iSAM over state-of-the-art point and distribution estimation algorithms using range-only SLAM problems with data association ambiguity. NF-iSAM presents superior accuracy in describing the posterior beliefs of continuous variables (e.g., position) and discrete variables (e.g., data association).

cs.RO↗

arXiv2021

Consensus-Informed Optimization Over Mixtures for Ambiguity-Aware Object SLAM

Building object-level maps can facilitate robot-environment interactions (e.g. planning and manipulation), but objects could often have multiple probable poses when viewed from a single vantage point, due to symmetry, occlusion or perceptual failures. A robust object-level simultaneous localization and mapping (object SLAM) algorithm needs to be aware of this pose ambiguity. We propose to maintain and subsequently disambiguate the multiple pose interpretations to gradually recover a globally consistent world representation. The max-mixtures model is applied to implicitly and efficiently track all pose hypotheses, but the resulting formulation is non-convex, and therefore subject to local optima. To mitigate this problem, temporally consistent hypotheses are extracted, guiding the optimization into the global optimum. This consensus-informed inference method is applied online via landmark variable re-initialization within an incremental SLAM framework, iSAM2, for robust real-time performance. We demonstrate that this approach improves SLAM performance on both simulated and real object SLAM problems with pose ambiguity.

cs.RO↗

arXiv2021

A Multi-Hypothesis Approach to Pose Ambiguity in Object-Based SLAM

In object-based Simultaneous Localization and Mapping (SLAM), 6D object poses offer a compact representation of landmark geometry useful for downstream planning and manipulation tasks. However, measurement ambiguity then arises as objects may possess complete or partial object shape symmetries (e.g., due to occlusion), making it difficult or impossible to generate a single consistent object pose estimate. One idea is to generate multiple pose candidates to counteract measurement ambiguity. In this paper, we develop a novel approach that enables an object-based SLAM system to reason about multiple pose hypotheses for an object, and synthesize this locally ambiguous information into a globally consistent robot and landmark pose estimation formulation. In particular, we (1) present a learned pose estimation network that provides multiple hypotheses about the 6D pose of an object; (2) by treating the output of our network as components of a mixture model, we incorporate pose predictions into a SLAM system, which, over successive observations, recovers a globally consistent set of robot and object (landmark) pose estimates. We evaluate our approach on the popular YCB-Video Dataset and a simulated video featuring YCB objects. Experiments demonstrate that our approach is effective in improving the robustness of object-based SLAM in the face of object pose ambiguity.

cs.RO↗

arXiv2021

NF-iSAM: Incremental Smoothing and Mapping via Normalizing Flows

This paper presents a novel non-Gaussian inference algorithm, Normalizing Flow iSAM (NF-iSAM), for solving SLAM problems with non-Gaussian factors and/or non-linear measurement models. NF-iSAM exploits the expressive power of neural networks, and trains normalizing flows to draw samples from the joint posterior of non-Gaussian factor graphs. By leveraging the Bayes tree, NF-iSAM is able to exploit the sparsity structure of SLAM, thus enabling efficient incremental updates similar to iSAM2, albeit in the more challenging non-Gaussian setting. We demonstrate the performance of NF-iSAM and compare it against the state-of-the-art algorithms such as iSAM2 (Gaussian) and mm-iSAM (non-Gaussian) in synthetic and real range-only SLAM datasets.

cs.RO↗