arXiv subjects

Qihan Xuan

Publications and source records attributed to Qihan Xuan.

6 recordsLinked to original sources

arXiv2025

Simulation of snakes using vertical body bending to traverse terrain with large height variation

Snake moves across various terrains by bending its elongated body. Recent studies discovered that snakes can use vertical bending to traverse terrain of large height variation, such as horizontally oriented cylinders, a wedge (Jurestovsky, Usher, Astley, 2021, J. Exp. Biol.), and uneven terrain (Fu & Li, 2020, Roy. Soc. Open Sci.; Fu, Astley, Li, 2022 Bioinspiration & Biomimetics). Here, to understand how vertical bending generates propulsion, we developed a dynamic simulation of a snake traversing a wedge (height = 0.05 body length, slope = 27 degrees) and a half cylindrical obstacle (height = 0.1 body length). By propagating down the body an internal torque profile with a maximum around the obstacle, the simulated snake moved forward as observed in the animal. Remarkably, even when frictional drag is low (snake-terrain kinetic friction coefficient of 0.20), the body must push against the wedge with a pressure 5 times that from body weight to generate sufficient forward propulsion to move forward. This indicated that snakes are highly capable of bending vertically to push against the environment to generate propulsion. Testing different controllers revealed that contact force feedback further helps generate and maintain propulsion effectively under unknown terrain perturbations.

q-bio.QM↗

arXiv2025

Randomness in appendage coordination facilitates strenuous ground self-righting

Randomness is common in biological and artificial systems, resulting either from stochasticity of the environment or noise in organisms or devices themselves. In locomotor control, randomness is typically considered a nuisance. For example, during dynamic walking, randomness in stochastic terrain leads to metastable dynamics, which must be mitigated to stabilize the system around limit cycles. Here, we studied whether randomness in motion is beneficial for strenuous locomotor tasks. Our study used robotic simulation modeling of strenuous, leg-assisted, winged ground self-righting observed in cockroaches, in which unusually large randomness in wing and leg motions is present. We developed a simplified simulation robot capable of generating similar self-righting behavior and varied the randomness level in wing-leg coordination. During each wing opening attempt, the more randomness added to the time delay between wing opening and leg swinging, the more likely it was for the naive robot (which did not know what coordination is best) to self-right within a finite time. Wing-leg coordination, measured by the phase between wing and leg oscillations, had a crucial impact on self-righting outcome. Without randomness, periodic wing and leg oscillations often limited the system to visit a few bad phases, leading to failure to escape from the metastable state. With randomness, the system explored phases thoroughly and had a better chance of encountering good phases to self-right. Our study complements previous work by demonstrating that randomness helps destabilize locomotor systems from being trapped in undesired metastable states, a situation common in strenuous locomotion.

physics.bio-ph↗

arXiv2025

Locomotor transitions in the potential energy landscape-dominated regime

To traverse complex three-dimensional terrainwith large obstacles, animals and robots must transition across different modes. However, the most mechanistic understanding of terrestrial locomotion concerns how to generate and stabilize near-steady-state, single-mode locomotion (e.g. walk, run). We know little about how to use physical interaction to make robust locomotor transitions. Here, we review our progress towards filling this gap by discovering terradynamic principles of multi-legged locomotor transitions, using simplified model systems representing distinct challenges in complex three-dimensional terrain. Remarkably, general physical principles emerge across diverse model systems, by modelling locomotor-terrain interaction using a potential energy landscape approach. The animal and robots' stereotyped locomotor modes are constrained by physical interaction. Locomotor transitions are stochastic, destabilizing, barrier-crossing transitions on the landscape. They can be induced by feed-forward self-propulsion and are facilitated by feedbackcontrolled active adjustment. General physical principles and strategies from our systematic studies already advanced robot performance in simple model systems. Efforts remain to better understand the intelligence aspect of locomotor transitions and how to compose larger-scale potential energy landscapes of complex three-dimensional terrains from simple landscapes of abstracted challenges. This will elucidate how the neuromechanical control system mediates physical interaction to generate multi-pathway locomotor transitions and lead to advancements in biology, physics, robotics and dynamical systems theory.

physics.bio-ph↗

arXiv2025

Coordinated appendages accumulate more energy to self-right on the ground

Animals and robots must right themselves after flipping over on the ground. The discoid cockroach pushes its wings against the ground in an attempt to dynamically self-right by a somersault. However, because this maneuver is strenuous, the animal often fails to overcome the potential energy barrier and makes continual attempts. In this process, the animal flails its legs, whose lateral perturbation eventually leads it to roll to the side to self-right. Our previous work developed a cockroach-inspired robot capable of leg-assisted, winged self-righting, and a robot simulation study revealed that the outcome of this strategy depends sensitively on wing-leg coordination (measured by the phase between their motions). Here, we further elucidate why this is the case by developing a template to model the complex hybrid dynamics resulting from discontinuous contact and actuation. We used the template to calculate the potential energy barrier that the body must overcome to self-right, mechanical energy contribution by wing pushing and leg flailing, and mechanical energy dissipation due to wing-ground collision. The template revealed that wing-leg coordination (phase) strongly affects self-righting outcome by changing mechanical energy budget. Well-coordinated appendage motions (good phase) accumulate more mechanical energy than poorly-coordinated motions (bad phase), thereby better overcoming the potential energy barrier to self-right more successfully. Finally, we demonstrated practical use of the template for predicting a new control strategy to further increase self-righting performance and informing robot design.

physics.bio-ph↗

arXiv2025

Environmental force sensing helps robots traverse cluttered large obstacles using physical interaction

Many applications require robots to move through complex 3-D terrain with large obstacles, such as self-driving, search and rescue, and extraterrestrial exploration. Although robots are already excellent at avoiding sparse obstacles, they still struggle in traversing cluttered large obstacles. To make progress, we need to better understand how to use and control the physical interaction with obstacles to traverse them. Forest floor-dwelling cockroaches can use physical interaction to transition between different locomotor modes to traverse flexible, grass-like beams of a large range of stiffness. Inspired by this, here we studied whether and how environmental force sensing helps robots make active adjustments to traverse cluttered large obstacles. We developed a physics model and a simulation of a minimalistic robot capable of sensing environmental forces during traversal of beam obstacles. Then, we developed a force-feedback control strategy, which estimated beam stiffness from the sensed contact force using the physics model. Then in simulation we used the estimated stiffness to control the robot to either stay in or transition to the more favorable locomotor modes to traverse. When beams were stiff, force sensing induced the robot to transition from a more costly pitch mode to a less costly roll mode, which helped the robot traverse with a higher success rate and less energy consumed. By contrast, if the robot simply pushed forward or always avoided obstacles, it would consume more energy, become stuck in front of beams, or even flip over. When the beams were flimsy, force sensing guided the robot to simply push across the beams. In addition, we demonstrated the robustness of beam stiffness estimation against body oscillations, randomness in oscillation, and uncertainty in position sensing. We also found that a shorter sensorimotor delay reduced energy cost of traversal.

cs.RO↗

arXiv2022

A minimalistic stochastic dynamics model of cluttered obstacle traversal

Robots are still poor at traversing cluttered large obstacles required for important applications like search and rescue. By contrast, animals are excellent at doing so, often using direct physical interaction with obstacles rather than avoiding them. Here, towards understanding the dynamics of cluttered obstacle traversal, we developed a minimalistic stochastic dynamics simulation inspired by our recent study of insects traversing grass-like beams. The 2-D model system consists of a forward self-propelled circular locomotor translating on a frictionless level plane with a lateral random force and interacting with two adjacent horizontal beams that form a gate. We found that traversal probability increases monotonically with propulsive force, but first increases then decreases with random force magnitude. For asymmetric beams with different stiffness, traversal is more likely towards the side of the less stiff beam. These observations are in accord with those expected from a potential energy landscape approach. Furthermore, we extended the single gate in a lattice configuration to form a large cluttered obstacle field. A Markov chain Monte Carlo method was applied to predict traversal in the large field, using the input-output probability map obtained from single gate simulations. This method achieved high accuracy in predicting the statistical distribution of the final location of the body within the obstacle field, while saving computation time by a factor of 10^5 over our dynamic simulation.

cs.RO↗