arXiv subjects

Qilong Cheng

Publications and source records attributed to Qilong Cheng.

6 recordsLinked to original sources

arXiv2026

IRIS: Learning-Driven Task-Specific Cinema Robot Arm for Visuomotor Motion Control

Robotic camera systems enable dynamic, repeatable motion beyond human capabilities, yet their adoption remains limited by the high cost and operational complexity of industrial-grade platforms. We present the Intelligent Robotic Imaging System (IRIS), a task-specific 6-DOF manipulator designed for autonomous, learning-driven cinematic motion control. IRIS integrates a lightweight, fully 3D-printed hardware design with a goal-conditioned visuomotor imitation learning framework based on Action Chunking with Transformers (ACT). The system learns object-aware and perceptually smooth camera trajectories directly from human demonstrations, eliminating the need for explicit geometric programming. The complete platform costs under $1,000 USD, supports a 1.5 kg payload, and achieves approximately 1 mm repeatability. Real-world experiments demonstrate accurate trajectory tracking, reliable autonomous execution, and generalization across diverse cinematic motions.

cs.RO↗

arXiv2024

VibraForge: A Scalable Prototyping Toolkit For Creating Spatialized Vibrotactile Feedback Systems

Spatialized vibrotactile feedback systems deliver tactile information by placing multiple vibrotactile actuators on the body. As increasing numbers of actuators are required to adequately convey information in complicated applications, haptic designers find it difficult to create such systems due to limited scalability of existing toolkits. We propose VibraForge, an open-source vibrotactile toolkit that supports up to 128 vibrotactile actuators. Each actuator is encapsulated within a self-contained vibration unit and driven by its own microcontroller. By leveraging a chain-connection method, each unit receives independent vibration commands from a control unit, with fine-grained control over intensity and frequency. We also designed a GUI Editor to expedite the authoring of spatial vibrotactile patterns. Technical evaluation showed that vibration units reliably reproduced audio waveforms with low-latency and high-bandwidth data communication. Case studies of a phonemic tactile display, virtual reality fitness training, and drone teleoperation demonstrated the potential usage of VibraForge within different domains. A usability study with non-expert users highlighted the low technical barrier and customizability of the toolkit.

cs.HC↗

arXiv2024

AeroHaptix: A Wearable Vibrotactile Feedback System for Enhancing Collision Avoidance in UAV Teleoperation

Haptic feedback enhances collision avoidance by providing directional obstacle information to operators during unmanned aerial vehicle (UAV) teleoperation. However, such feedback is often rendered via haptic joysticks, which are unfamiliar to UAV operators and limited to single-direction force feedback. Additionally, the direct coupling between the input device and the feedback method diminishes operators' sense of control and induces oscillatory movements. To overcome these limitations, we propose AeroHaptix, a wearable haptic feedback system that uses spatial vibrations to simultaneously communicate multiple obstacle directions to operators, without interfering with their input control. The layout of vibrotactile actuators was optimized via a perceptual study to eliminate perceptual biases and achieve uniform spatial coverage. A novel rendering algorithm, MultiCBF, extended control barrier functions to support multi-directional feedback. Our system evaluation showed that compared to a no-feedback condition, AeroHaptix effectively reduced the number of collisions and input disagreement. Furthermore, operators reported that AeroHaptix was more helpful than force feedback, with improved situational awareness and comparable workload.

cs.RO↗

arXiv2023

Extrinsic Calibration of 2D Millimetre-Wavelength Radar Pairs Using Ego-Velocity Estimates

Correct radar data fusion depends on knowledge of the spatial transform between sensor pairs. Current methods for determining this transform operate by aligning identifiable features in different radar scans, or by relying on measurements from another, more accurate sensor. Feature-based alignment requires the sensors to have overlapping fields of view or necessitates the construction of an environment map. Several existing techniques require bespoke retroreflective radar targets. These requirements limit both where and how calibration can be performed. In this paper, we take a different approach: instead of attempting to track targets or features, we rely on ego-velocity estimates from each radar to perform calibration. Our method enables calibration of a subset of the transform parameters, including the yaw and the axis of translation between the radar pair, without the need for a shared field of view or for specialized targets. In general, the yaw and the axis of translation are the most important parameters for data fusion, the most likely to vary over time, and the most difficult to calibrate manually. We formulate calibration as a batch optimization problem, show that the radar-radar system is identifiable, and specify the platform excitation requirements. Through simulation studies and real-world experiments, we establish that our method is more reliable and accurate than state-of-the-art methods. Finally, we demonstrate that the full rigid body transform can be recovered if relatively coarse information about the platform rotation rate is available.

cs.RO↗

arXiv2022

Spatiotemporal Calibration of 3D Millimetre-Wavelength Radar-Camera Pairs

Autonomous vehicles (AVs) fuse data from multiple sensors and sensing modalities to impart a measure of robustness when operating in adverse conditions. Radars and cameras are popular choices for use in sensor fusion; although radar measurements are sparse in comparison to camera images, radar scans penetrate fog, rain, and snow. However, accurate sensor fusion depends upon knowledge of the spatial transform between the sensors and any temporal misalignment that exists in their measurement times. During the life cycle of an AV, these calibration parameters may change, so the ability to perform in-situ spatiotemporal calibration is essential to ensure reliable long-term operation. State-of-the-art 3D radar-camera spatiotemporal calibration algorithms require bespoke calibration targets that are not readily available in the field. In this paper, we describe an algorithm for targetless spatiotemporal calibration that does not require specialized infrastructure. Our approach leverages the ability of the radar unit to measure its own ego-velocity relative to a fixed, external reference frame. We analyze the identifiability of the spatiotemporal calibration problem and determine the motions necessary for calibration. Through a series of simulation studies, we characterize the sensitivity of our algorithm to measurement noise. Finally, we demonstrate accurate calibration for three real-world systems, including a handheld sensor rig and a vehicle-mounted sensor array. Our results show that we are able to match the performance of an existing, target-based method, while calibrating in arbitrary, infrastructure-free environments.

cs.RO↗

arXiv2020

Precise nanoscale temperature mapping in operational microelectronic devices by use of a phase change material

The microelectronics industry is pushing the fundamental limit on the physical size of individual elements to produce faster and more powerful integrated chips. These chips have nanoscale features that dissipate power resulting in nanoscale hotspots leading to device failures. To understand the reliability impact of the hotspots, the device needs to be tested under the actual operating conditions. Therefore, the development of high-resolution thermometry techniques is required to understand the heat dissipation processes during the device operation. Recently, several thermometry techniques have been proposed,such as radiation thermometry, thermocouple based contact thermometry, scanning thermal microscopy (SThM), scanning transmission electron microscopy (STEM) and transition based threshold thermometers. However, most of these techniques have limitations including the need for extensive calibration, perturbation of the actual device temperature, low throughput, and the use of ultra-high vacuum. Here, we present a facile technique, which uses a thin film contact thermometer based on the phase change material Ge2Sb2Te5, to precisely map thermal contours from the nanoscale to the microscale. Ge2Sb2Te5 undergoes a crystalline transition at Tg with large changes in its electric conductivity, optical reflectivity and density. Using this approach, we map the surface temperature of a nanowire and an embedded micro-heater on the same chip where the scales of the temperature contours differ by three orders of magnitude. The spatial resolution can be as high as 20 nanometers thanks to the continuous nature of the thin film.

physics.app-ph↗