arXiv subjects

Qing Gu

Publications and source records attributed to Qing Gu.

65 records · Page 4Linked to original sources

arXiv2020

Active Perovskite Hyperbolic Metasurface

A special class of anisotropic media, hyperbolic metamaterials and metasurfaces (HMMs), has attracted much attention in recent years due to its unique abilities to manipulate and engineer electromagnetic waves on the subwavelength scale. Because all HMM designs require metal dielectric composites, the unavoidable metal loss at optical frequencies inspired the development of active HMMs, where gain materials is incorporated to compensate the metal loss. Here, we experimentally demonstrate an active type II HMM that operates at vacuum wavelength near 750 nm on a silicon platform. Different from previous active HMMs operating below 1 μm, the dielectric constituent in our HMM is solely composed of gain medium, by utilizing solution processed and widely tunable metal halide perovskite gain. Thanks to the facile fabrication, tunability and silicon compatibility of our active HMM, this work paves the way towards HMM's integration into on chip components, and eventually, into photonic integrated circuits.

physics.optics↗

arXiv2020

Local Group Analogs in $Λ$CDM cosmological simulations

We use semi-analytic galaxy catalogs based on two high-resolution cosmological $N$-body simulations, Millennium-WMAP7 and Millennium-II, to investigate the formation of the Local Group (LG) analogs. Unlike previous studies, we use the observed stellar masses to select the LG member (Milky Way (MW) and M31) analogs, and then impose constrains using the observed separation, isolation, and kinematics of the two main member galaxies. By comparing radial and low-ellipticity orbits between the MW and M31, we find higher tangential velocity results in higher total mass, which are 4.4$^{+2.4}_{-1.5}\times$10$^{12}\rm M_{\odot}$ and 6.6$^{+2.7}_{-1.5}\times$10$^{12}\rm M_{\odot}$ for radial and low-ellipticity orbits. The orbits also influence the individual mass distribution of MW and M31 analogs. For radial orbits, the typical host halo masses of the MW and M31 are 1.5$^{+1.4}_{-0.7}\times$10$^{12}\rm M_{\odot}$ and 2.5$^{+1.3}_{-1.1}\times$10$^{12}\rm M_{\odot}$; for low-ellipticity orbits, the masses are 2.5$^{+2.2}_{-1.4}\times$10$^{12}\rm M_{\odot}$ and 3.8$^{+2.8}_{-1.8}\times$10$^{12} \rm M_{\odot}$. The LG is located primarily in filaments with tails extending toward higher densities up to $δ\sim4.5$. The dark matter velocity anisotropy parameters $β$ of both the MW and M31 analogs are close to zero in the center, increasing to 0.2--0.3 at 50--80 kpc and decreasing slowly outward. The slope is much flatter than computed from the MW satellites, and the amplitude is smaller than traced by halo stars. Values of $β$ from different tracers agree at $\sim$120 kpc where $β\sim$ 0.2. We also find that model predictions agree broadly with observations in the radial distribution and luminosity function of satellites around the MW and M31.

astro-ph.GA↗

arXiv2020

Enhanced Operational Stability of Perovskite Light-Emitting Electrochemical Cells Leveraging Ionic Additives

Hybrid perovskites are emerging as highly efficient materials for optoelectronic applications, however, the operational lifetime has remained a limiting factor for the continued progress of perovskite light emitting devices such as light emitting diodes (LEDs) and perovskite light emitting electrochemical cells (PeLECs). In this work, PeLECs utilizing an optimized fraction of LiPF6 salt additive exhibit enhanced stability. At 0.5 wt% LiPF6, devices exhibit 100 h operation at high brightness in excess of 800 cd/m2 under constant current driving, achieving a maximum luminance of 3260 cd/m2 and power efficiency of 9.1 Lm/W. This performance extrapolates to a 6700 h luminance half-life from 100 cd/m2, a 5.6-fold improvement over devices with no lithium salt additive. Analysis under constant voltage driving reveals three current regimes, with lithium addition strongly enhancing current in the second and third regimes. The third regime correlates degradation of luminance with decreased current. These losses are mitigated by LiPF6 addition, an effect postulated to arise from preservation of perovskite structure. To further understand lithium salt addition, electrochemical impedance spectroscopy with equivalent circuit modeling is performed. Electrical double layer widths from ionic redistribution are minimized at 0.5wt% LiPF6 and inversely correlate with efficient performance.

cond-mat.mtrl-sci↗

arXiv2019

Environmentally Stable Room Temperature Continuous Wave Lasing in Defect-passivated Perovskite

Metal halide perovskites have emerged as promising gain materials for on-chip lasers in photonic integrated circuits (PICs). However, stable continuous wave (CW) lasing behavior under optical pumping at room temperature - a prerequisite for electrically pumped lasing - has not yet been demonstrated. To achieve stable CW operation, we introduce a multiplex of strategies that include morphological, structural and interfacial engineering of CH3NH3PbBr3 (MAPbBr3) thin films to improve perovskite's intrinsic stability, as well as high quality cavity design to reduce the operational power. We demonstrate for the first time, over 90-minute-long green CW lasing with 9.4W/cm2 threshold from a polycarbonate (PC)-defect-passivated, directly patterned MAPbBr3 two-dimensional photonic crystal (PhC) cavity without any substrate cooling. We also show our approach's effectiveness on the performance of MAPbBr3 under electrical excitation: we observe a seven-fold current efficiency enhancement by applying our strategies to a MAPbBr3 LED. This work paves the way to the realization of electrically pumped lasing in perovskites.

physics.optics↗

arXiv2019

Bright and Efficient Perovskite Light Emitting Electrochemical Cells Leveraging Ionic Additives

Perovskite light-emitting diodes (PeLEDs) have drawn considerable attention for their favorable optoelectronic properties. Perovskite light-emitting electrochemical cells (PeLECs) _ devices that utilize mobile ions _ have recently been reported but have yet to reach the performance of the best PeLEDs. We leveraged a poly(ethylene oxide) electrolyte and lithium dopant in CsPbBr3 thin films to produce PeLECs of improved brightness and efficiency. In particular, we found that a single layer PeLEC from CsPbBr3:PEO:LiPF6 with 0.5% wt. LiPF6 produced highly efficient (22 cd/A) and bright (~15000 cd/m2) electroluminescence. To understand this improved performance among PeLECs, we characterized these perovskite thin films with photoluminescence (PL) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). These studies revealed that this optimal LiPF6 concentration improves electrical double layer formation, reduces the occurrence of voids, charge traps, and pinholes, and increases grain size and packing density.

physics.app-ph↗

arXiv2019

Non-Hermitian Photonics based on Charge-Parity Symmetry

Parity-time ($\mathcal{PT}$) symmetry, originally conceived for non-Hermitian open quantum systems, has opened an excitingly new avenue for the coherent control of light. By tailoring optical gain and loss in integrated photonic structures, $\mathcal{PT}$ symmetric non-Hermitian photonics has found applications in many fields ranging from single mode lasing to novel topological matters. Here we propose a new paradigm towards non-Hermitian photonics based on the charge-parity ($\mathcal{CP}$) symmetry that has the potential to control the flow of light in an unprecedented way. In particular, we consider continuous dielectric chiral materials, where the charge conjugation and parity symmetries are broken individually, but preserved jointly. Surprisingly, the phase transition between real and imaginary spectra across the exceptional point is accompanied by a dramatic change of the photonic band topology from dielectric to hyperbolic. We showcase broad applications of $\mathcal{CP}$ symmetric photonics such as all-angle polarization-dependent negative refraction materials, enhanced spontaneous emission for laser engineering, and non-Hermitian topological photonics. The $\mathcal{CP}$ symmetry opens an unexplored pathway for studying non-Hermitian photonics without optical gain/loss by connecting two previously distinct material properties: chirality and hyperbolicity, therefore providing a powerful tool for engineering many promising applications in photonics and other related fields.

physics.optics↗

arXiv2018

Room-temperature continuous-wave operation of organometal halide perovskite lasers

Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers, and have come to rival inorganic III-V group semiconductors as the material candidate for chip-scale lasers. Although electrically pumped lasing at room temperature is the ultimate goal, optically pumped continuous-wave lasing at room temperature,a prerequisite for a laser diode,has not been achieved so far. Here, we report lasing action in a surface emitting distributed feedback methylammonium lead iodide (MAPbI3) perovskite laser on silicon substrate, at room temperature under continuous-wave optical pumping, in ambient air environment. This outstanding performance is achieved by the ultra-low lasing threshold of 13 W/cm2, which is enabled by the thermal nanoimprint lithography that directly patterns perovskite into a high Q cavity with large mode confinement, while at the same time improves perovskite emission characteristics. Our results represent a major step toward the realization of perovskite laser diodes, which is essential in the future insertion of perovskite lasers into photonic integrated circuits, for applications in optical computing, sensing and on-chip quantum information.

physics.optics↗

arXiv2017

CAMREP- Concordia Action and Motion Repository

Action recognition, motion classification, gait analysis and synthesis are fundamental problems in a number of fields such as computer graphics, bio-mechanics and human computer interaction that generate a large body of research. This type of data is complex because it is inherently multidimensional and has multiple modalities such as video, motion capture data, accelerometer data, etc. While some of this data, such as monocular video are easy to acquire, others are much more difficult and expensive such as motion capture data or multi-view video. This creates a large barrier of entry in the research community for data driven research. We have embarked on creating a new large repository of motion and action data (CAMREP) consisting of several motion and action databases. What makes this database unique is that we use a variety of modalities, enabling multi-modal analysis. Presently, the size of datasets varies with some having a large number of subjects while others having smaller numbers. We have also acquired long capture sequences in a number of cases, making some datasets rather large.

cs.CV↗

arXiv2016

3DUNDERWORLD-SLS: An Open-Source Structured-Light Scanning System for Rapid Geometry Acquisition

Recently, there has been an increase in the demand of virtual 3D objects representing real-life objects. A plethora of methods and systems have already been proposed for the acquisition of the geometry of real-life objects ranging from those which employ active sensor technology, passive sensor technology or a combination of various techniques. In this paper we present the development of a 3D scanning system which is based on the principle of structured-light, without having particular requirements for specialized equipment. We discuss the intrinsic details and inherent difficulties of structured-light scanning techniques and present our solutions. Finally, we introduce our open-source scanning software system "3DUNDERWORLD-SLS" which implements the proposed techniques both in CPU and GPU. We have performed extensive testing with a wide range of models and report the results. Furthermore, we present a comprehensive evaluation of the system and a comparison with a high-end commercial 3D scanner.

cs.CV↗

arXiv2016

Dynamic Hysteresis Probes High-β Nanolaser Emission Regimes

The quest for an integrated light source that promises high energy efficiency and fast modulation for high-performance photonic circuits has led to the development of room-temperature telecom-wavelength nanoscale laser with high spontaneous emission factors, β. The coherence characterization of this type of lasers is inherently difficult with the conventional measurement of output light intensity versus input pump intensity due to the diminishing kink in the measurement curve. We demonstrate the transition from chaotic to coherent emission of a high-β pulse-pump metallo-dielectric nanolaser can be determined by examining the width of a second order intensity correlation peak, which shrinks below and broadens above threshold. Photon fluctuation study, first one ever reported for this type of nanolaser, confirms the validity of this measurement technique. Additionally, we show that the width variation above threshold results from the delayed threshold phenomenon, providing the first indirect observation of dynamical hysteresis in a nanolaser.

physics.optics↗

arXiv2015

Resonantly Trapped Bound State in the Continuum Laser

Cavities play a fundamental role in wave phenomena from quantum mechanics to electromagnetism and dictate the spatiotemporal physics of lasers. In general, they are constructed by closing all "doors" through which waves can escape. We report, at room temperature, a bound state in the continuum laser that harnesses optical modes residing in the radiation continuum but nonetheless may possess arbitrarily high quality factors. These counterintuitive cavities are based on resonantly trapped symmetry-compatible modes that destructively interfere. Our experimental demonstration opens exciting avenues towards coherent sources with intriguing topological properties for optical trapping, biological imaging, and quantum communication.

physics.optics↗