Searcharxiv⌕ Search

arXiv subjects

Qing He

Publications and source records attributed to Qing He.

106 records · Page 6Linked to original sources

Free-rider Episode Screening via Dual Partition Model

One of the drawbacks of frequent episode mining is that overwhelmingly many of the discovered patterns are redundant. Free-rider episode, as a typical example, consists of a real pattern doped with some additional noise events. Because of the possible high support of the inside noise events, such free-rider episodes may have abnormally high support that they cannot be filtered by frequency based framework. An effective technique for filtering free-rider episodes is using a partition model to divide an episode into two consecutive subepisodes and comparing the observed support of such episode with its expected support under the assumption that these two subepisodes occur independently. In this paper, we take more complex subepisodes into consideration and develop a novel partition model named EDP for free-rider episode filtering from a given set of episodes. It combines (1) a dual partition strategy which divides an episode to an underlying real pattern and potential noises; (2) a novel definition of the expected support of a free-rider episode based on the proposed partition strategy. We can deem the episode interesting if the observed support is substantially higher than the expected support estimated by our model. The experiments on synthetic and real-world datasets demonstrate EDP can effectively filter free-rider episodes compared with existing state-of-the-arts.

cs.DB↗

A distribution function correction-based immersed boundary- lattice Boltzmann method with truly second-order accuracy for fluid-solid flows

The immersed boundary lattice Boltzmann method (IB-LBM) has been widely used in the simulation of fluid-solid interaction and particulate flow problems, since proposed in 2004. However, it is usually a non-trivial task to retain the flexibility and the accuracy simultaneously in the implementation of this approach. Based on the intrinsic nature of the LBM, we propose a simple and second-order accurate IB-LBM in this paper, where the no-slip boundary condition on the fluid-solid interface is directly imposed by iteratively correcting the distribution function near the boundary, markedly similar to the treatment of boundary condition in the original LBM. Therefore, there are no additional efforts needed to construct an interfacial force model (such as the spring, feedback and direct force models) and absorb this force into the framework of LBM. It is worth mentioning that we retain the discrete delta function for the connection between the Lagrangian and Eulerian meshes, thus preserving the flexibility of the conventional IB-LBM. Second-order accuracy of the present IB-LBM is reasonably confirmed in the simulation of cylindrical Couette flow, while the conventional approach is generally a first-order scheme. The present method is first validated in the flow past a fixed cylinder. No streamline penetration is found, indicating the exactly enforcement of the no-slip boundary condition. Furthermore, in the simulations of one and two particles settling under gravity, good agreements can be observed comparing with the data available in the literature.

physics.comp-ph↗

Cross-domain novelty seeking trait mining for sequential recommendation

Transfer learning has attracted a large amount of interest and research in last decades, and some efforts have been made to build more precise recommendation systems. Most previous transfer recommendation systems assume that the target domain shares the same/similar rating patterns with the auxiliary source domain, which is used to improve the recommendation performance. However, to the best of our knowledge, almost these works do not consider the characteristics of sequential data. In this paper, we study the new cross-domain recommendation scenario for mining novelty-seeking trait. Recent studies in psychology suggest that novelty-seeking trait is highly related to consumer behavior, which has a profound business impact on online recommendation. Previous work performing on only one single target domain may not fully characterize users' novelty-seeking trait well due to the data scarcity and sparsity, leading to the poor recommendation performance. Along this line, we proposed a new cross-domain novelty-seeking trait mining model (CDNST for short) to improve the sequential recommendation performance by transferring the knowledge from auxiliary source domain. We conduct systematic experiments on three domain data sets crawled from Douban (www.douban.com) to demonstrate the effectiveness of the proposed model. Moreover, we analyze how the temporal property of sequential data affects the performance of CDNST, and conduct simulation experiments to validate our analysis.

cs.IR↗

An Efficient Density-based Clustering Algorithm for Higher-Dimensional Data

DBSCAN is a typically used clustering algorithm due to its clustering ability for arbitrarily-shaped clusters and its robustness to outliers. Generally, the complexity of DBSCAN is O(n^2) in the worst case, and it practically becomes more severe in higher dimension. Grid-based DBSCAN is one of the recent improved algorithms aiming at facilitating efficiency. However, the performance of grid-based DBSCAN still suffers from two problems: neighbour explosion and redundancies in merging, which make the algorithms infeasible in high-dimensional space. In this paper, we propose a novel algorithm named GDPAM attempting to extend Grid-based DBSCAN to higher data dimension. In GDPAM, a bitmap indexing is utilized to manage non-empty grids so that the neighbour grid queries can be performed efficiently. Furthermore, we adopt an efficient union-find algorithm to maintain the clustering information in order to reduce redundancies in the merging. The experimental results on both real-world and synthetic datasets demonstrate that the proposed algorithm outperforms the state-of-the-art exact/approximate DBSCAN and suggests a good scalability.

cs.DB↗

Tree-Structured Neural Machine for Linguistics-Aware Sentence Generation

Different from other sequential data, sentences in natural language are structured by linguistic grammars. Previous generative conversational models with chain-structured decoder ignore this structure in human language and might generate plausible responses with less satisfactory relevance and fluency. In this study, we aim to incorporate the results from linguistic analysis into the process of sentence generation for high-quality conversation generation. Specifically, we use a dependency parser to transform each response sentence into a dependency tree and construct a training corpus of sentence-tree pairs. A tree-structured decoder is developed to learn the mapping from a sentence to its tree, where different types of hidden states are used to depict the local dependencies from an internal tree node to its children. For training acceleration, we propose a tree canonicalization method, which transforms trees into equivalent ternary trees. Then, with a proposed tree-structured search method, the model is able to generate the most probable responses in the form of dependency trees, which are finally flattened into sequences as the system output. Experimental results demonstrate that the proposed X2Tree framework outperforms baseline methods over 11.15% increase of acceptance ratio.

cs.AI↗

Out-of-plane Piezoelectricity and Ferroelectricity in Layered $α$-In2Se3 Nano-flakes

Piezoelectric and ferroelectric properties in the two dimensional (2D) limit are highly desired for nanoelectronic, electromechanical, and optoelectronic applications. Here we report the first experimental evidence of out-of-plane piezoelectricity and ferroelectricity in van der Waals layered $α$-In2Se3 nano-flakes. The non-centrosymmetric R3m symmetry of the $α$-In2Se3 samples is confirmed by scanning transmission electron microscopy, second-harmonic generation, and Raman spectroscopy measurements. Domains with opposite polarizations are visualized by piezo-response force microscopy. Single-point poling experiments suggest that the polarization is potentially switchable for $α$-In2Se3 nano-flakes with thicknesses down to ~ 10 nm. The piezotronic effect is demonstrated in two-terminal devices, where the Schottky barrier can be modulated by the strain-induced piezopotential. Our work on polar $α$-In2Se3, one of the model 2D piezoelectrics and ferroelectrics with simple crystal structures, shows its great potential in electronic and photonic applications.

cond-mat.mtrl-sci↗

Observation of a Three-Dimensional Quasi-Long-Range Electronic Supermodulation in YBa2Cu3O7-x/La0.7Ca0.3MnO3 Heterostructures

Recent developments in high-temperature superconductivity highlight a generic tendency of the cuprates to develop competing electronic (charge) supermodulations. While coupled to the lattice and showing different characteristics in different materials, these supermodulations themselves are generally conceived to be quasi-two-dimensional, residing mainly in individual CuO2 planes, and poorly correlated along the c-axis. Here we observed with resonant elastic x-ray scattering a distinct type of electronic supermodulation in YBa2Cu3O7-x (YBCO) thin films grown epitaxially on La0.7Ca0.3MnO3 (LCMO). This supermodulation has a periodicity nearly commensurate with four lattice constants in-plane, eight out-of-plane, with long correlation lengths in three dimensions. It sets in far above the superconducting transition temperature and competes with superconductivity below this temperature for electronic states predominantly in the CuO2 plane. Our finding sheds new light on the nature of charge ordering in cuprates as well as a reported long-range proximity effect between superconductivity and ferromagnetism in YBCO/LCMO heterostructures.

cond-mat.str-el↗

Coexistence of spin glass and ferroelectricity in highly ordered Bi2FeMnO6 epitaxial thin film

Highly ordered Bi2FeMnO6 epitaxial thin films have been successfully grown on SrTiO3 substrate. Both synchrotron X-ray reciprocal space mapping and high resolution transmission electron microscopy confirmed the alternative alignment of Fe and Mn along [111] direction of Bi2FeMnO6 films. Magnetic and ferroelectric properties of Bi2FeMnO6 films are characterized and analyzed. The room-temperature ferroelectricity is well kept in Bi2FeMnO6 film as expected. However, it is very interesting that Bi2FeMnO6 film exhibits a typical spin-glass behavior and very weak magnetism rather than a ferri/ferromagnetism as generally believed. Our first-principles calculations suggest a spin frustration model for Bi2FeMnO6, which can well explain the intriguing magnetic property of Bi2FeMnO6 film.

cond-mat.mtrl-sci↗

Phase- and frequency-controlled interference nonlinear optics in superconducting circuits

We present a new type of phase- and frequency-sensitive amplification and attenuation in a cyclically driven three-level superconducting Josephson system. Different from the previous linear theory of pure phase-sensitive amplification, a new physical mechanism$-$combined action of nonlinear wave mixing and wave interference$-$is developed and leads to not only amplification but also attenuation. This is referred to as interference nonlinear optics. Our results show the sudden output signal transition from large gain to deep suppression by tuning the relative phase and in this case the system can act as a phase-controlled amplitude modulator. We also show the continuous change from output enhancement to attenuation by adjusting the driving-field frequency and in this situation the system behaves as a frequency-controlled amplitude modulator. Our study opens up a new perspective for its widespread applications in quantum information science.

quant-ph↗

The Improvement of Joule Balance NIM-1 and the Design of New Joule Balance NIM-2

The development of the joule balance method to measure the Planck constant, in support of the redefinition of the kilogram, has been going on at the National Institute of Metrology of China (NIM) since 2007. The first prototype has been built to check the feasibility of the principle. In 2011, the relative uncertainty of the Planck constant measurement at NIM is $7.7\times10^{-5}$. Self-heating of the coils, swing of the coil, are the main uncertainty contributions. Since 2012, some improvements have been made to reduce these uncertainties. The relative uncertainty of the joule balance is reduced to $7.2\times10^{-6}$ at present. The Planck constant measured with the joule balance is $h=6.6261041(470)\times10^{-34}$Js. The relative difference between the determined h and the CODATA2010 recommendation value is $5\times10^{-6}$. Further improvements are still being carried out on the NIM-1 apparatus. At the same time, the design and construction of a brand new and compact joule balance NIM-2 are also in progress and presented here.

physics.ins-det↗

The NIM Inertial Mass Measurement Project

An inertial mass measurement project, which is expected to precisely measure the Planck constant, $h$, for possible comparisons with known gravitational mass measurement projects, e.g., the watt balance and the Avogadro project, is being carried out at the National Institute of Metrology, China. The principle, apparatus, and experimental investigations of the inertial mass measurement are presented. The prototype of the experiment and the Planck constant with relative uncertainty of several parts in $10^{4}$ have been achieved for principle testing.

physics.ins-det↗

Polynomial Complexity Minimum-Time Scheduling in a Class of Wireless Networks

We consider a wireless network with a set of transmitter-receiver pairs, or links, that share a common channel, and address the problem of emptying finite traffic volume from the transmitters in minimum time. This, so called, minimum-time scheduling problem has been proved to be NP-hard in general. In this paper, we study a class of minimum-time scheduling problems in which the link rates have a particular structure consistent with the assumed environment and topology. We show that global optimality can be reached in polynomial time and derive optimality conditions. Then we consider a more general case in which we apply the same approach and thus obtain approximation as well as lower and upper bounds to the optimal solution. Simulation results confirm and validate our approach.

cs.NI↗

Periodic elastic nanodomains in ultrathin tetrogonal-like BiFeO3 films

We present a synchrotron grazing incidence x-ray diffraction analysis of the domain structure and polar symmetry of highly strained BiFeO3 thin films grown on LaAlO3 substrate. We revealed the existence of periodic elastic nanodomains in the pure tetragonal-like BFO ultrathin films down to a thickness of 6 nm. A unique shear strain accommodation mechanism is disclosed. We further demonstrated that the periodicity of the nanodomains increases with film thickness but deviates from the classical Kittel's square root law in ultrathin thickness regime (6 - 30 nm). Temperature-dependent experiments also reveal the disappearance of periodic modulation above 90C due to a MC-MA structural phase transition.

cond-mat.mtrl-sci↗

Local Conduction at the BiFeO3-CoFe2O4 Tubular Oxide Interface

In strongly correlated oxides, heterointerfaces, manipulating the interaction, frustration, and discontinuity of lattice, charge, orbital, and spin degrees of freedom, generate new possibilities for next generation devices. In this study, we went back to examine the existing oxide heterostructures and found the local conduction at the BiFeO3-CoFe2O4 vertical interface. In such hetero-nanostructure, the tubular interface, surrounding BiFeO3-CoFe2O4 vertical interface, can not only be the medium to the coupling between phases, but also be a new state of the matter. Our study demonstrates a novel concept on oxide interface design and opens a pathway alternative for the explorations of diverse functionalities in complex oxide interfaces.

cond-mat.mtrl-sci↗

Minimum-Length Scheduling with Finite Queues: Solution Characterization and Algorithmic Framework

We consider a set of transmitter-receiver pairs, or links, that share a common channel and address the problem of emptying backlogged queues at the transmitters in minimum time. The problem amounts to determining activation subsets of links and their time durations to form a minimum-length schedule. The problem of scheduling has been studied under various formulations before. In this paper, we present fundamental insights and solution characterizations that include: (i) showing that the complexity of the problem remains high for any continuous and increasing rate function, (ii) formulating and proving sufficient and necessary optimality conditions of two base scheduling strategies that correspond to emptying the queues using "one-at-a-time" or "all-at-once" strategies, (iii) presenting and proving the tractability of the special case in which the transmission rates are functions only of the cardinality of the link activation sets. These results are independent of physical-layer system specifications and are valid for any form of rate function. We then develop an algorithmic framework. The framework encompasses exact as well as sub-optimal, but fast, scheduling algorithms, all under a unified principle design. Through computational experiments we finally investigate the performance of several specific algorithms.

cs.IT↗

Impact on $γϕ_3$ from CLEO-c Using CP-tagged $D\toK_{S,L}ππ$ Decays

Precision determination of the CKM angle $γ/ϕ_3$ depends upon constraints on charm mixing amplitudes, measurements of doubly-Cabibbo suppressed amplitudes and relative phases, and studies of charm Dalitz plots tagged by flavor or CP eigenstates. In this note we describe the technique used at CLEO-c to constrain the $K_{S,L}ππ$ model uncertainty, and its impact on $γ/ϕ_3$ measurements at B-factories presented at the Charm 2007 Workshop.

hep-ex↗