Searcharxiv⌕ Search

arXiv subjects

Qinghua Zhao

Publications and source records attributed to Qinghua Zhao.

34 records · Page 2Linked to original sources

TraceNet: Tracing and Locating the Key Elements in Sentiment Analysis

In this paper, we study sentiment analysis task where the outcomes are mainly contributed by a few key elements of the inputs. Motivated by the two-streams hypothesis, we propose a neural architecture, named TraceNet, to address this type of task. It not only learns discriminative representations for the target task via its encoders, but also traces key elements at the same time via its locators. In TraceNet, both encoders and locators are organized in a layer-wise manner, and a smoothness regularization is employed between adjacent encoder-locator combinations. Moreover, a sparsity constraints are enforced on locators for tracing purposes and items are proactively masked according to the item weights output by locators.A major advantage of TraceNet is that the outcomes are easier to understand, since the most responsible parts of inputs are identified. Also, under the guidance of locators, it is more robust to attacks due to its focus on key elements and the proactive masking training strategy. Experimental results show its effectiveness for sentiment classification. Moreover, we provide several case studies to demonstrate its robustness and interpretability.

cs.CL↗

Entity Concept-enhanced Few-shot Relation Extraction

Few-shot relation extraction (FSRE) is of great importance in long-tail distribution problem, especially in special domain with low-resource data. Most existing FSRE algorithms fail to accurately classify the relations merely based on the information of the sentences together with the recognized entity pairs, due to limited samples and lack of knowledge. To address this problem, in this paper, we proposed a novel entity CONCEPT-enhanced FEw-shot Relation Extraction scheme (ConceptFERE), which introduces the inherent concepts of entities to provide clues for relation prediction and boost the relations classification performance. Firstly, a concept-sentence attention module is developed to select the most appropriate concept from multiple concepts of each entity by calculating the semantic similarity between sentences and concepts. Secondly, a self-attention based fusion module is presented to bridge the gap of concept embedding and sentence embedding from different semantic spaces. Extensive experiments on the FSRE benchmark dataset FewRel have demonstrated the effectiveness and the superiority of the proposed ConceptFERE scheme as compared to the state-of-the-art baselines. Code is available at https://github.com/LittleGuoKe/ConceptFERE.

cs.CL↗

Integrating van der Waals materials on paper substrates for electrical and optical applications

Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate.

cond-mat.mtrl-sci↗

Optical microscopy-based thickness estimation in thin GaSe flakes

We have implemented three different optical methods to quantitatively assess the thickness of thin GaSe flakes transferred on both transparent substrates, like Gel-Film, or SiO2/Si substrates. We show how their apparent color can be an efficient way to make a quick rough estimation of the thickness of the flakes. This method is more effective for SiO2/Si substrates as the thickness dependent color change is more pronounced on these substrates than on transparent substrates. On the other hand, for transparent substrates, the transmittance of the flakes in the blue region of the visible spectrum can be used to estimate the thickness. We find that the transmittance of flakes in the blue part of the spectrum decreases at a rate of 1.2%/nm. On SiO2/Si, the thickness of the flakes can be accurately determined by fitting optical contrast spectra to a Fresnel law-based model. Finally, we also show how the quantitative analysis of transmission mode optical microscopy images can be a powerful method to quickly probe the environmental degradation of GaSe flakes exposed to aging conditions.

physics.optics↗

Thickness identification of thin InSe by optical microscopy methods

Indium selenide (InSe), as a novel van der Waals layered semiconductor, has attracted a large research interest thanks to its excellent optical and electrical properties in the ultra-thin limit. Here, we discuss four different optical methods to quantitatively identify the thickness of thin InSe flakes on various substrates, such as SiO2/Si or transparent polymeric substrates. In the case of thin InSe deposited on a transparent substrate, the transmittance of the flake in the blue region of the visible spectrum can be used to estimate the thickness. For InSe supported by SiO2/Si, the thickness of the flakes can be estimated either by assessing their apparent colors or accurately analyzed using a Fresnel-law based fitting model of the optical contrast spectra. Finally, we also studied the thickness dependency of the InSe photoluminescence emission energy, which provides an additional tool to estimate the InSe thickness and it works both for InSe deposited on SiO2/Si and on a transparent polymeric substrate.

cond-mat.mtrl-sci↗

Giant piezoresistive effect and strong band gap tunability in ultrathin InSe upon biaxial strain

The ultrathin nature and dangling bonds free surface of two-dimensional (2D) semiconductors allow for significant modifications of their band gap through strain engineering. Here, thin InSe photodetector devices are biaxially stretched, finding, a strong band gap tunability upon strain. The applied biaxial strain is controlled through the substrate expansion upon temperature increase and the effective strain transfer from the substrate to the thin InSe is confirmed by Raman spectroscopy. The band gap change upon biaxial strain is determined through photoluminescence measurements, finding a gauge factor of up to ~200 meV/%. We further characterize the effect of biaxial strain on the electrical properties of the InSe devices. In the dark state, a large increase of the current is observed upon applied strain which gives a piezoresistive gauge factor value of ~450-1000, ~5-12 times larger than that of other 2D materials and of state-of-the-art silicon strain gauges. Moreover, the biaxial strain tuning of the InSe band gap also translates in a strain-induced redshift of the spectral response of our InSe photodetectors with ΔEcut-off ~173 meV at a rate of ~360 meV/% of strain, indicating a strong strain tunability of the spectral bandwidth of the photodetectors.

cond-mat.mtrl-sci↗

InSe Schottky diodes based on van der Waals contacts

Two-dimensional semiconductors are excellent candidates for next-generation electronics and optoelec-tronics thanks to their electrical properties and strong light-matter interaction. To fabricate devices with optimal electrical properties, it is crucial to have both high-quality semiconducting crystals and ideal con-tacts at metal-semiconductor interfaces. Thanks to the mechanical exfoliation of van der Waals crystals, atomically-thin high-quality single-crystals can easily be obtained in a laboratory. However, conventional metal deposition techniques can introduce chemical disorder and metal-induced mid-gap states that induce Fermi level pinning and can degrade the metal-semiconductor interfaces, resulting in poorly performing devices. In this article, we explore the electrical contact characteristics of Au-InSe and graphite-InSe van der Waals contacts, obtained by stacking mechanically exfoliated InSe flakes onto pre-patterned Au or graphite electrodes without the need of lithography or metal deposition. The high quality of the metal-semiconductor interfaces obtained by van der Waals contact allows to fabricate high-quality Schottky di-odes based on the Au-InSe Schottky barrier. Our experimental observation indicates that the contact barrier at the graphite-InSe interface is negligible due to the similar electron affinity of InSe and graphite, while the Au-InSe interfaces are dominated by a large Schottky barrier.

cond-mat.mes-hall↗

The role of traps in the photocurrent generation mechanism in thin In-Se photodetectors

Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find that the photoresponsivity, the response time and the photocurrent power dependency are strongly correlated in this material. This observation indicates that the photogating effect plays an imporant role for thin InSe flakes, and it is the dominant mechanism in the ultra-high photoresponsivity of pristine InSe devices. In addition, when exposing the pristine InSe photodetectors to the ambient environment we observe a fast and irreversible change in the photoresponse, with a decrease in the photoresponsivity accompanied by an increase of the operating speed. We attribute this photodetector performance change (upon atmospheric exposure) to the decrease in the density of the traps present in InSe, due to the passivation of selenium vacancies by atmospheric oxygen species. This passivation is accompanied by a downward shift of the InSe Fermi level and by a decrease of the Fermi level pinning, which leads to an increase of the Schottky barrier between Au and InSe. Our study reveals the important role of traps induced by defects in tailoring the properties of devices based on 2D materials and offers a controllable route to design and functionalize thin InSe photodetectors to realize devices with either ultrahigh photoresposivity or fast operation speed.

cond-mat.mes-hall↗

A system to test 2D optoelectronic devices in high vacuum

The exploration of electronic and optoelectronic properties of two-dimensional (2D) materials has become one of the most attractive line of research since the isolation of graphene. Such 'all-surface materials' present a strong sensitivity to environmental conditions and thus characterization of the devices based on these materials usually requires measurement systems operating in high-vacuum. However, conventional optoelectronic probe-station testing systems are are not compatible with high vacuum operation and vacuum-compatible versions are rather expensive. Here, we present a high-vacuum system specifically designed to test electronic and optoelectronic devices based on 2D materials. This system can be implemented with low budget and it is mostly based on the assembly of commercially available standard vacuum and optic components. Despite the simplicity of this system we demonstrate full capabilities to characterize optoelectronic devices in a broad range of wavelengths with fast pumping/venting speed and possibility of modulating the device temperature (room temperature to ~150deg).

physics.app-ph↗

InSe: a two-dimensional semiconductor with superior flexibility

Two-dimensional Indium Selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (~1-2 layers to ~40 layers) flakes experimentally by using buckling-based methodology. We find that the Young's modulus has a value of 23.1 +- 5.2 GPa, one of the lowest values reported up to date for crystalline two-dimensional materials. This superior flexibility can be very attractive for different applications, such as strain engineering and flexible electronics.

physics.app-ph↗

A system for the deterministic transfer of 2D materials under inert environmental conditions

The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes that require the use of very thick gloves to operate within the chamber or the implementation of several motorized micro-manipulators. Here, we set up a deterministic transfer system for 2D materials within a gloveless anaerobic chamber. Unlike other setups based on over-pressurized gloveboxes, in our system the operator can manipulate the 2D materials within the chamber with bare hands. This experimental setup allows us to exfoliate 2D materials and to deterministically place them at a desired location with accuracy in a controlled O2-free and very low humidity (<2% RH) atmosphere. We illustrate the potential of this system to work with air-sensitive 2D materials by comparing the stability of black phosphorus and perovskite flakes inside and outside the anaerobic chamber.

physics.ins-det↗

An inexpensive system for the deterministic transfer of 2D materials

The development of systems for the deterministic transfer of two-dimensional (2D) materials have undoubtedly contributed to a great advance in the 2D materials research. In fact, they have made it possible to fabricate van der Waals heterostructures and 2D materials-based devices with complex architectures. Nonetheless, as far as we know, the amount of papers in the literature providing enough details to reproduce these systems by other research groups is very scarce in the literature. Moreover, these systems typically require the use of expensive optical and mechanical components hampering their applicability in research groups with low budget. Here we demonstrate how a deterministic placement system for 2D materials set up with full capabilities can be implemented under 900 Eur which can be easily implemented in low budget labs and educational labs.

physics.ed-ph↗

Tailoring Hot Exciton Dynamics in 2D Hybrid Perovskites through Cation Modification

We report a family of two-dimensional hybrid perovskites (2DHPs) based on phenethylammonium lead iodide ((PEA)$_2$PbI$_4$) that show complex structure in their low-temperature excitonic absorption and photoluminescence (PL) spectra as well as hot exciton PL. We replace the 2-position (ortho) H on the phenyl group of the PEA cation with F, Cl, or Br to systematically increase the cation's cross-sectional area and mass and study changes in the excitonic structure. These single atom substitutions substantially change the observable number of and spacing between discrete resonances in the excitonic absorption and PL spectra and drastically increase the amount of hot exciton PL that violates Kasha's rule by over an order of magnitude. To fit the progressively larger cations, the inorganic framework distorts and is strained, reducing the Pb-I-Pb bond angles and increasing the 2DHP band gap. Correlation between the 2DHP structure and steady-state and time-resolved spectra suggests the complex structure of resonances arises from one or two manifolds of states, depending on the 2DHP Pb-I-Pb bond angle (as)symmetry, and the resonances within a manifold are regularly spaced with an energy separation that decreases as the mass of the cation increases. The uniform separation between resonances and the dynamics that show excitons can only relax to the next-lowest state are consistent with a vibronic progression caused by a vibrational mode on the cation. These results demonstrate that simple changes to the structure of the cation can be used to tailor the properties and dynamics of the confined excitons without directly modifying the inorganic framework.

physics.app-ph↗

Towards Air Stability of Ultra-Thin GaSe Devices: Avoiding Environmental and Laser-Induced Degradation by Encapsulation

Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Nonetheless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectroscopy and optoelectronic measurements in photodetectors based on thin GaSe to study its long-term stability. We found that the GaSe flakes exposed to air tend to decompose forming firstly amorphous selenium and Ga2Se3 and subsequently Ga2O3. While the first stage is accompanied by an increase in photocurrent, in the second stage we observe a decrease in photocurrent which leads to the final failure of GaSe photodetectors. Additionally, we found that the encapsulation of the GaSe photodetectors with hexagonal boron nitride (h-BN) can protect the GaSe from degradation and can help to achieve long-term stability of the devices.

cond-mat.mtrl-sci↗

Multiple optical frequency-conversions in few-layer GaSe assisted by a photonic crystal cavity

While two-dimensional (2D) materials have intriguing second-order nonlinearities with ultrahigh coefficient and electrical tunability, their atomic layer thicknesses hinder explorations of other optical frequency-conversions (OFCs) than second harmonic generation (SHG) due to inefficient light-coupling and unachievable phase-matching. We report, by resonantly pumping a photonic crystal cavity integrated with a few-layer GaSe, it is possible to realize multiple second-order nonlinear processes in GaSe even with microwatts continuous wave pumps, including SHGs, sum-frequency generations (SFGs), cascaded SFGs and their induced third harmonic generations. These OFCs arise from the significant cavity-enhancements. The enhancement factor of a SHG process is estimated exceeding 1,300. The cascaded SFGs have comparably strong intensities with those of SHGs. To the best of our knowledge, this is the first observation of cascaded second-order nonlinear processes in 2D materials. The cavity-assisted OFCs could provide a view to study deterministic OFCs in 2D materials with low pump power and expand their optoelectronic applications to nonlinear regime.

physics.optics↗

Microwatts continuous-wave pumped second harmonic generation in few- and mono-layer GaSe

We demonstrate the first achievement of continuous-wave (CW) pumped second harmonic generation (SHG) in few- and mono-layer gallium selenide (GaSe) flakes, which are coated on silicon photonic crystal (PC) cavities. Because of ultrahigh second order nonlinearity of the two-dimensional (2D) GaSe and localized resonant mode in the PC cavity, SHG's pump power is greatly reduced to microwatts. In a nine-layer GaSe coated PC cavity, while the optical power inside the GaSe flake is only 1.5 percent of that in the silicon PC slab, the SHG in GaSe is more than 650 times stronger than the third harmonic generation in silicon slab, indicating 2D GaSe's great potentials to strengthen nonlinear processes in silicon photonics. Our study opens up a new view to expand 2D materials' optoelectronic applications in nonlinear regime and chip-integrated active devices.

physics.optics↗