Searcharxiv⌕ Search

arXiv subjects

Qingqing Wu

Publications and source records attributed to Qingqing Wu.

At least 37 records · Page 2Linked to original sources

Suppressing Beam Squint Effect For Near-Field Wideband Communication Through Movable Antennas

In this correspondence, we study deploying movable antenna (MA) array in a wideband multiple-input-single-output (MISO) communication system, where near-field (NF) channel model is considered. To alleviate beam squint effect, we propose to maximize the minimum analog beamforming gain across the entire wideband spectrum by appropriately adjusting MAs' positions, which is a highly challenging task. By introducing a slack variable and adopting the cutting-the-edge smoothed-gradient-descent-ascent (SGDA) method, we develop algorithms to resolve the aforementioned challenge. Numerical results verify the effectiveness of our proposed algorithms and demonstrate the benefit of utilizing MA array to mitigate beam squint effect in NF wideband system.

cs.IT↗

Intelligent Reflecting Surfaces for THz Communications: Fundamentals, Key Solutions, and System Prototyping

Intelligent reflecting surfaces (IRSs) have emerged as a cost-effective technology for terahertz (THz) communications by enabling programmable control of the wireless environment. This paper provides a comprehensive overview of IRSs-aided THz communications, covering hardware designs, advanced signal processing techniques, and practical deployment strategies. It first examines key THz reconfigurable metasurface architectures, including electronic, optical, phase-change material, and micro-electromechanical systems (MEMS)-based implementations, highlighting their reconfiguration mechanisms and challenges. Then, fundamental effects including near field and beam squint in wideband THz systems are analyzed, along with their impacts on system performance. The paper further explores conventional and beam-squint-assisted channel estimation methods, innovative beam management strategies, and deployment considerations across large- and small-scale scenarios. Practical experiments at 220 gigahertz (GHz) validate the effectiveness of IRS in improving signal strength and communication reliability for both single-user and multi-user setups.

eess.SP↗

A Flexible Design for Beam Squint Effect Suppression in IRS-Aided THz Communications

In this paper, we study employing movable components on both base station (BS) and intelligent reflecting surface (IRS) in a wideband terahertz (THz) multiple-input-single-output (MISO) system, where the BS is equipped with a movable antenna (MA) array and the IRS consists of movable subarrays. To alleviate double beam squint effect caused by the coupling of beam squint at the BS and IRS, we propose to maximize the minimal received power across a wide THz spectrum by delicately configuring the positions of MAs and IRS subarrays, which is highly challenging. By adopting majorization-minimization (MM) methodology, we develop an algorithm to tackle the aforementioned optimization. Numerical results demonstrate the effectiveness of our proposed algorithm and the benefit of utilizing movable components on the BS and IRS to mitigate double beam squint effect in wideband THz communications.

cs.IT↗

Joint Beamforming and Position Optimization for IRS-Aided SWIPT with Movable Antennas

Simultaneous wireless information and power transfer (SWIPT) has been envisioned as a promising technology to support ubiquitous connectivity and reliable sustainability in Internet-of-Things (IoT) networks, which, however, generally suffers from severe attenuation caused by long distance propagation, leading to inefficient wireless power transfer (WPT) for energy harvesting receivers (EHRs). This paper proposes to introduce emerging intelligent reflecting surface (IRS) and movable antenna (MA) technologies into SWIPT systems aiming at enhancing information transmission for information decoding receivers (IDRs) and improving receive power of EHRs. We consider to maximize the weighted sum-rate of IDRs via jointly optimizing the active and passive beamforming at the base station (BS) and IRS, respectively, as well as the positions of MAs, while guaranteeing the requirements of all EHRs. To tackle this challenging task due to the non-convexity of associated optimization, we develop an efficient algorithm combining weighted minimal mean square error (WMMSE), block coordinate descent (BCD), majorization-minimization (MM), and penalty duality decomposition (PDD) frameworks. Besides, we present a feasibility characterization method to examine the achievability of EHRs' requirements. Simulation results demonstrate the significant benefits of our proposed solutions. Particularly, the optimized IRS configuration may exhibit higher performance gain than MA counterpart under our considered scenario.

cs.IT↗

Wireless Communication with Cross-Linked Rotatable Antenna Array: Architecture Design and Rotation Optimization

Rotatable antenna (RA) technology can harness additional spatial degrees of freedom by enabling the dynamic three-dimensional orientation control of each antenna. Unfortunately, the hardware cost and control complexity of traditional RA systems is proportional to the number of RAs. To address the issue, we consider a cross-linked (CL) RA structure, which enables the coordinated rotation of multiple antennas, thereby offering a cost-effective solution. To evaluate the performance of the CL-RA array, we investigate a CL-RA-aided uplink system. Specifically, we first establish system models for both antenna element-level and antenna panel-level rotation. Then, we formulate a sum rate maximization problem by jointly optimizing the receive beamforming at the base station and the rotation angles. For the antenna element-level rotation, we derive the optimal solution of the CL-RA array under the single-user case. Subsequently, for two rotation schemes, we propose an alternating optimization algorithm to solve the formulated problem in the multi-user case, where the receive beamforming and the antenna rotation angles are obtained by applying the minimum mean square error method and feasible direction method, respectively. In addition, considering the hardware limitations, we apply the genetic algorithm to address the discrete rotation angles selection problem. Simulation results show that by carefully designing the row-column partition scheme, the performance of the CL-RA architecture is quite close to that of the flexible antenna orientation scheme. Moreover, the CL antenna element-level scheme surpasses the CL antenna panel-level scheme by 25% and delivers a 128% performance improvement over conventional fixed-direction antennas.

cs.IT↗

Joint Transmit and Receive Antenna Orientation Design for Secure MIMO Communications

Physical layer security (PLS) is a promising paradigm for safeguarding 6G wireless networks by exploiting the inherent characteristics of wireless channels. However, the efficiency of conventional PLS is often limited by fixed orientation antennas. This paper investigates a rotatable antenna (RA)-aided secure multiple-input multiple-output (MIMO) communication system, where both the transmitter and the receiver are equipped with RAs in the presence of an eavesdropper. By dynamically optimizing the orientations of RAs, we can proactively reshape the effective MIMO channels to enhance legitimate transmission while simultaneously suppressing information leakage to the eavesdropper. We formulate a secrecy rate maximization problem by jointly optimizing the transmit beamforming, artificial noise (AN) covariance matrix, and the transmit/receive RA orientations, subject to the transmit power budget and antenna orientation constraints. To tackle the resulting highly coupled and non-convex problem, we first study a simplified single-input single-output (SISO) case to reveal the structure of the optimal RA orientation. For the general MIMO case, we develop an alternating optimization algorithm by reformulating the original problem through the minimum mean-square error framework. In particular, the transmit beamforming and AN covariance matrix are derived in semi-closed forms, while the RA orientations are updated via the Riemannian Frank-Wolfe method. The proposed design is further extended to the multi-receiver secure transmission scenario. Simulation results show that the proposed scheme converges rapidly and achieves significant secrecy rate gains over the conventional fixed-orientation scheme.

cs.IT↗

Active Sensing-assisted UAV Communications with Jittering: Framework and Performance Analysis

Providing reliable communication for unmanned aerial vehicles (UAVs) via existing cellular networks is crucial for enabling the rapid growth of the low-altitude economy. However, UAV jittering significantly degrades communication quality due to induced beam misalignment. Inspired by recent advances in integrated sensing and communication, we propose a novel two-stage active sensing-assisted communication framework tailored for ground-to-UAV links with jittering. Specifically, two schemes are conceived to leverage sensing for enhancing communication performance, namely the communication-oriented scheme and the sensing-oriented scheme. For the sensing-oriented scheme, deterministic signals are employed in the first stage to facilitate angle-of-arrival (AoA) acquisition at the UAV side, followed by pure communication service in the second stage by using the estimated AoA. In contrast, the communication-oriented scheme employs Gaussian information-bearing signals throughout both stages, with AoA estimation relying on Gaussian random signals. For both schemes, we provide maximum likelihood estimators for AoA, along with analytical results characterizing the Cramér-Rao bound. To capture the performance limit, closed-form expressions for the achievable rates of the two schemes are derived, unveiling a fundamental tradeoff between sensing and communication quality across the two stages by tuning the time allocated to the first stage. The optimal time allocation that maximizes the overall rate is obtained in semi-closed-form. Based on these results, we unveil a sufficient condition under which the communication-oriented scheme outperforms the sensing-oriented scheme, which admits an interesting threshold-based structure. Asymptotic analysis demonstrates that the performance loss of the proposed schemes relative to the jitter-free upper bound approaches zero in the high transmit power regime.

cs.IT↗

Convergence-Latency-Aware Adaptive Modulation and Resource Allocation in RIS-Assisted Wireless Federated Learning

Federated learning (FL) over wireless networks suffers from significant training latency and degraded convergence due to unreliable wireless transmission, especially under blocked propagation environments. Although reconfigurable intelligent surfaces (RISs) can improve communication reliability, existing wireless FL studies rarely characterize the trade-off between learning convergence and communication delay under modulation-dependent transmission errors. In this paper, we consider a wireless FL system operating under RIS-assisted blocked-link propagation scenarios, and focus on adaptive modulation and sub-channel allocation for convergence-latency aware communication design. By characterizing the effect of symbol errors on uploaded local gradients, we derive a convergence-related upper bound that reveals the impact of symbol error rate (SER) on FL loss decay. Based on this result, we formulate a joint convergence-latency optimization problem, which is cast as a mixed-integer nonlinear programming (MINLP) problem, and solve it using a low-complexity hybrid alternating optimization framework. Extensive experiments on MNIST, CIFAR-10, and Speech Commands show that the proposed scheme consistently achieves faster convergence and higher test accuracy than existing adaptive communication schemes, especially in complex tasks and challenging wireless scenarios.

cs.LG↗

A Covariance-Surrogate Framework for Movable-Antenna Enabled Anti-Jamming with Unknown Jammers

In this paper, we investigate a movable antenna (MA) enabled anti-jamming optimization problem, where a legitimate uplink system is exposed to multiple jammers with unknown jamming channels. To enhance the anti-jamming capability of the considered system, an MA array is deployed at the receiver, and the antenna positions and the minimum-variance distortionless-response (MVDR) receive beamformer are jointly optimized to maximize the output signal-to-interference-plus-noise ratio (SINR). The main challenge arises from the fact that the interference covariance matrix is unknown and nonlinearly dependent on the antenna positions. To overcome these issues, we propose a surrogate objective by replacing the unknown covariance with the sample covariance evaluated at the current antenna position anchor. Under a two-timescale framework, the surrogate objective is updated once per block (contains multiple snapshots) at the current anchor position, while the MVDR beamformer is adapted on a per-snapshot basis. We establish a local bound on the discrepancy between the surrogate and the true objective by leveraging matrix concentration inequalities, and further prove that a natural historical-averaging surrogate suffers from a non-vanishing geometric bias. Building on these insights, we develop a low-complexity projected trust-region (TR) surrogate optimization (PTRSO) algorithm that maintains the locality of each iteration via TR constraints and enforces feasibility through projection, which is guaranteed to converge to a stationary point near the anchor. Numerical results verify the effectiveness and robustness of the proposed PTRSO algorithm, which consistently achieves higher output SINR than existing baselines.

eess.SP↗

Beyond Beamforming: Phase-and-Gain Channel Shaping via Rotatable Antenna Arrays

This paper investigates geometry-reconfigurable transmission for multiuser communication systems enabled by a rotatable antenna array. In contrast to conventional fixed arrays, the proposed architecture jointly exploits array pose adjustment and element-level boresight steering, thereby reshaping both the array-induced phase responses and the direction-dependent channel gains. We formulate a weighted sum-rate maximization problem that jointly optimizes the transmit beamformers, array pose, and element boresights under practical visibility and steering constraints. To reveal the underlying design principles, we first provide a geometric interpretation via zero-forcing analysis, showing that the resulting rates stem from both channel-strength enhancement and spatial-separability improvement. Specifically, array-pose rotation improves inter-user channel orthogonality even with isotropic elements, whereas directional elements introduce a tradeoff between phase-based spatial separation and boresight-dependent gain alignment. Motivated by these insights, we develop an efficient optimization framework that jointly coordinates transmit beamforming, array-pose adaptation, and element-boresight steering to exploit the geometry-induced phase-and-gain channel-shaping capability. Simulation results demonstrate that the proposed joint design outperforms fixed-array, pose-only, and boresight-only benchmarks, with larger gains achieved under more directive element patterns and tighter boresight-steering constraints.

eess.SP↗

Ultra-Low-Cost Hybrid Beamforming: A New Static-Connection Architecture with Sparse Phase-Shifter Sharing

Hybrid beamforming is a promising solution for high-frequency multi-antenna wireless systems, but its implementation is constrained by the cost and complexity of analog phase-shifter (PS) networks. Although sub-connected architectures simplify the analog network, their conventional realization still requires a dedicated PS for each antenna, causing considerable layout area, wiring, calibration, and control overheads. To address this issue, this paper proposes a novel static-connection architecture with sparse PSs for ultra-low-cost sub-connected hybrid beamforming, where antennas within each sub-array share a PS through an optimized fixed PS-to-antenna connection matrix. The proposed architecture preserves static connections while enabling dynamic beam control via adaptive PS phase-shift adjustments and digital precoding. For the single-radio-frequency (RF)-chain scenario, the sparse-PS connection design is transformed into an antenna-grouping problem, with analytically characterized structural properties and an efficient algorithm. For the multi-RF-chain scenario, we develop a quality-of-service (QoS)-majorization-minimization (MM) algorithm to handle the mixed discrete-continuous optimization problem. Numerical results demonstrate that the proposed architecture reduces the PS count while preserving most beamforming capability of the traditional full-PS sub-connected architecture. In particular, the proposed design achieves PS-count reductions of 37.5% and 62.5% in single-RF-chain and multi-RF-chain systems, respectively, while avoiding deep-null and grating-lobe degradations associated with deterministic connection schemes. These results provide engineering insights into static sparse-PS sharing: the key to hardware-efficient hybrid beamforming is not merely reducing the PS count, but also preserving essential analog-domain degrees of freedom through optimized PS connection topologies.

cs.IT↗

Low-Altitude UAV Tracking via Sensing-Assisted Predictive Beamforming

Sensing-assisted predictive beamforming shows significant promise for enhancing various future unmanned aerial vehicle (UAV) applications in integrated sensing and communication (ISAC) systems. However, the impact of such beamforming technique on the communication reliability was largely unexplored and challenging to characterize. To fill this research gap and tackle this issue, this paper proposes a cellular-connected UAV tracking scheme leveraging extended Kalman filtering (EKF), where the predicted UAV trajectory, sensing duration ratio, and target constant received signal-to-noise ratio (SNR) are jointly optimized to maximize the outage capacity at each time slot. To address the implicit nature of the objective function, analytical outage probability (OP) approximations are proposed based on second-order Taylor expansions, providing an efficient and full characterization of outage capacity. Subsequently, an efficient algorithm is proposed based on a combination of bisection search and successive convex approximation (SCA) to address the non-convex optimization problem with guaranteed convergence. To further reduce computational complexity, a second efficient algorithm is developed based on alternating optimization (AO). Simulation results validate the accuracy of the derived OP approximations, the effectiveness of the proposed algorithms, and the significant outage capacity enhancement over various benchmarks. Furthermore, we show that the optimized predicted UAV trajectory tends to be parallel to the base station's uniform linear array antennas with a nonzero minimum distance, indicating a trade-off between decreasing path loss and enjoying wide beam coverage for outage capacity maximization.

eess.SP↗

Sensing for Reliable UAV Communication: Robust Trajectory and Resource Optimization in Low-Altitude Networks

In low-altitude wireless networks, sensing-aided communication has emerged as a promising integrated sensing and communication (ISAC) paradigm for unmanned aerial vehicle (UAV) tracking and communication. This paper investigates reliable sensing-aided communication for multiple cellular-connected UAVs under mobility uncertainties. Specifically, we maximize the minimum outage capacity among UAVs by jointly optimizing their real-time predicted positions, as well as the base station (BS) transmit power and bandwidth allocations. To address the non-convex and intractable maximum tolerable outage probability (OP) constraints, two robust optimization schemes are proposed based on a continuous confidence ellipse (CE) and discretized inverse-whitened sectors (IWSs), respectively. For the CE-based scheme, an efficient algorithm is proposed to optimize the predicted UAV positions individually via block successive convex approximation, followed by convex resource allocation. For the IWS-based scheme, an IWS-based OP approximation is proposed to facilitate the robust optimization, based on which a low-complexity IWS selection method is proposed to decouple the optimization variables. Then, a similar sequential optimization algorithm is proposed based on the projected gradient descent approach. The two algorithms are further unified into a common trajectory-resource optimization framework, revealing a low-complexity structure for robust UAV trajectory and resource management. Simulation results validate the effectiveness of our proposed OP approximation, demonstrate the significant outage capacity improvement of the proposed robust optimization schemes over benchmark schemes, and illustrate the superiority of the IWS-based scheme over the CE-based scheme.

eess.SP↗

Fundamentals of NOMA in Low-Earth Orbit Coordinated Multi-Satellite Networks

Coordinated multi-satellite (CoMS) transmission and non-orthogonal multiple access (NOMA) are envisioned to jointly enhance coverage, capacity, and spectrum efficiency for satellite networks. Their integration into a unified CoMS-NOMA framework will allow more efficient, reliable, and energy-efficient multi-user access. This paper investigates the downlink performance of CoMS-NOMA networks from a system-level perspective, in which multiple satellites cooperatively serve multiple users via NOMA. Leveraging tools from stochastic geometry, related angles and distances in CoMS-NOMA are first derived as intermediate results. Then, we obtain the combined signal power distributions and analyze coverage and spectrum performance under both inter- and intra-satellite interference, accounting for potential imperfect successive interference cancellation (SIC). The analytical model is validated across a range of system parameters, including the number of satellites, service region angle, error-propagation factor, and power allocation coefficients. Numerical results indicate that increasing the number of cooperative satellites does not always improve coverage and spectrum efficiency. Additionally, while a higher main-lobe gain improves coverage, a near-perfect SIC provides only slightly greater benefits than a reasonably good SIC. With properly selected power allocation coefficients, CoMS-NOMA achieves up to a 270% improvement in coverage and a 56% gain in sum spectral efficiency, compared with conventional orthogonal and single-satellite schemes, indicating potential for green, energy-efficient satellite networking.

eess.SP↗

Rotatable Antenna-Enabled Mobile Edge Computing

In the evolving landscape of mobile edge computing (MEC), enhancing communication reliability and computation efficiency to support increasingly stringent low-latency services remains a fundamental challenge. Rotatable antenna (RA) is a promising technology that introduces new spatial degrees of freedom (DoFs) to tackle this challenge. In this letter, we investigate an RA-enabled MEC system where antenna boresight directions can be independently adjusted to proactively improve wireless channel conditions for latency-critical users. We aim to minimize the maximum computation latency by jointly optimizing the MEC server computing resource allocation, receive beamforming, and the deflection angles of all RAs. To address the resulting non-convex problem, we develop an efficient alternating optimization (AO) framework. Specifically, the optimal edge computing resource allocation is derived based on the Karush-Kuhn-Tucker (KKT) conditions. Given the computing resources, the receive beamforming is optimized using semidefinite relaxation (SDR) combined with a bisection search. Furthermore, the RA deflection angles are optimized via fractional programming (FP) and successive convex approximation (SCA). Simulation results verify that the proposed RA-enabled MEC scheme significantly reduces the maximum computation latency compared with conventional benchmark methods.

cs.IT↗

Advancing Fluid Antenna-Assisted Non-Terrestrial Networks in 6G and Beyond: Fundamentals, State of the Art, and Future Directions

With the surging demand for ultra-reliable, low-latency, and ubiquitous connectivity in Sixth-Generation (6G) networks, Non-Terrestrial Networks (NTNs) emerge as a key complement to terrestrial networks by offering flexible access and global coverage. Despite the significant potential, NTNs still face critical challenges, including dynamic propagation environments, energy constraints, and dense interference. As a key 6G technology, Fluid Antennas (FAs) can reshape wireless channels by reconfiguring radiating elements within a limited space, such as their positions and rotations, to provide higher channel diversity and multiplexing gains. Compared to fixed-position antennas, FAs can present a promising integration path for NTNs to mitigate dynamic channel fading and optimize resource allocation. This paper provides a comprehensive review of FA-assisted NTNs. We begin with a brief overview of the classical structure and limitations of existing NTNs, the fundamentals and advantages of FAs, and the basic principles of FA-assisted NTNs. We then investigate the joint optimization solutions, detailing the adjustments of FA configurations, NTN platform motion modes, and resource allocations. We also discuss the combination with other emerging technologies and explore FA-assisted NTNs as a novel network architecture for intelligent function integrations. Furthermore, we delve into the physical layer security and covert communication in FA-assisted NTNs. Finally, we highlight the potential future directions to empower broader applications of FA-assisted NTNs.

cs.NI↗

Engineering Favorable Propagation: Near-Field IRS Deployment for Spatial Multiplexing

In intelligent reflecting surface IRS assisted multiple input multiple output MIMO systems, a strong line of sight LoS link is required to compensate for the severe cascaded path loss. However, such a link renders the effective channel highly rank deficient and fundamentally limits spatial multiplexing. To overcome this limitation, this paper leverages the large aperture of sparse arrays to harness near field spherical wavefronts, and establishes a deterministic deployment criterion that strategically positions the IRS in the near field of a base station BS. This placement exploits the spherical wavefronts of the BS IRS link to engineer decorrelated channels, thereby fundamentally overcoming the rank deficiency issue in far field cascaded channels. Based on a physical channel model for the sparse BS array and the IRS, we characterize the rank properties and inter user correlation of the cascaded BS IRS user channel. We further derive a closed form favorable propagation metric that reveals how the sparse array geometry and the IRS position can be tuned to reduce inter user channel correlation. The resulting geometry driven deployment rule provides a simple guideline for creating a favorable propagation environment with enhanced effective degrees of freedom. The favorable channel statistics induced by our deployment criterion enable a low complexity maximum ratio transmission MRT precoding scheme. This serves as the foundation for an efficient algorithm that jointly optimizes the IRS phase shifts and power allocation based solely on long term statistical channel state information CSI. Simulation results validate the effectiveness of our deployment criterion and demonstrate that our optimization framework achieves significant performance gains over benchmark schemes.

cs.IT↗

Multi-User MIMO with Rotatable Antennas and IRS: Joint Antenna Boresight and IRS Orientation Design

In this paper, we investigate an intelligent reflecting surface (IRS)-assisted multi-user system, where the base station (BS) employs rotatable antennas (RAs) and the IRS can adjust the panel orientation.To alleviate the severe multiplicative path loss of the cascaded channel, the IRS is deployed near the BS, while the user-BS and user-IRS links remain in the far field. We formulate a sum-rate maximization problem by jointly optimizing the receive beamforming, IRS phase shifts, BS antenna boresights, and IRS panel orientation. To tackle the resulting highly coupled and non-convex problem, we first study a single-user case to reveal the structure of the dual-rotation gain, which is shown to be multiplicatively separable in the far field but coupled in the near field. For the general multi-user case, we develop an alternating optimization algorithm, where the receive beamforming is updated in closed form, the IRS phase shifts are optimized by an FP-assisted Riemannian conjugate gradient method, and the BS antenna boresights and IRS panel orientation are updated via projected gradient methods. Simulation results demonstrate the significant sum-rate gains achieved by the proposed coordinated rotation design over fixed-orientation and single-rotation benchmark schemes, and provide useful insights into near-field dual-rotation design.

cs.IT↗