arXiv subjects

Qingwei Jiang

Publications and source records attributed to Qingwei Jiang.

11 recordsLinked to original sources

arXiv2025

Design and Analysis of Phase Conjugation-Based Self-Alignment Beamforming for RIS-Assisted Terahertz SWIPT

Terahertz (THz) simultaneous wireless information and power transfer (SWIPT) is a promising technology for enabling ultra-high-rate and low-latency communications in massive battery-free Internet of Things (IoT) deployments for 6G networks. However, conventional THz systems rely on narrow directional beams that necessitate precise alignment, typically achieved through high-overhead beam scanning procedures, which fundamentally at odds with the energy constraints of battery-free IoT devices. In this paper, we propose a novel self-alignment architecture for THz SWIPT leveraging a reconfigurable intelligent surface (RIS) to eliminate complex beam scanning. By integrating phase conjugate circuits at both the base station and user equipment, the RIS facilitates a resonance-based bidirectional retro-reflection mechanism, enabling the system to autonomously converge to an aligned state without manual intervention. We develop an analytical channel transfer model and a power cycle model to characterize the resonance-assisted beam alignment process and power transfer efficiency. Simulation results demonstrate that the RIS-enabled system achieves effective spatial power concentration with significant sidelobe suppression, leading to a communication capacity of 127.84 Gbit/s and a received power of 13.62 mW over a 2.2-meter link.

eess.SP↗

arXiv2025

FDMA-Based Passive Multiple Users SWIPT Utilizing Resonant Beams

The rapid development of IoT technology has led to a shortage of spectrum resources and energy, giving rise to simultaneous wireless information and power transfer (SWIPT) technology. However, traditional multiple input multiple output (MIMO)-based SWIPT faces challenges in target detection. We have designed a passive multi-user resonant beam system (MU-RBS) that can achieve efficient power transfer and communication through adaptive beam alignment. The frequency division multiple access (FDMA) is employed in the downlink (DL) channel, while frequency conversion is utilized in the uplink (UL) channel to avoid echo interference and co-channel interference, and the system architecture design and corresponding mathematical model are presented. The simulation results show that MU-RBS can achieve adaptive beam-forming without the target transmitting pilot signals, has high directivity, and as the number of iterations increases, the power transmission efficiency, signal-to-noise ratio and spectral efficiency of the UL and DL are continuously optimized until the system reaches the optimal state.

eess.SP↗

arXiv2025

Integrated Sensing and Communication System Based on Radio Frequency Resonance Beam

To address the complex beam control in traditional multiple-input multiple-output (MIMO) systems, researchers have proposed adaptive beam alignment using retro-directive antenna (RDA) arrays. This approach creates echo resonance between the base station (BS) and user equipment (UE), significantly reducing computational load. However, conventional resonant beam systems (RBS) suffer from echo interference due to the shared uplink and downlink frequency. Therefore, this paper proposes an innovative resonance beam-based integrated sensing and communication (RB-ISAC) system designed for efficient passive sensing and bidirectional communication. In this system, the UE operates passively, with both the BS and UE utilizing a phase conjugation and frequency conversion structure to decouple uplink and downlink carrier frequencies, ensuring continuous electromagnetic wave oscillation between the two ends. Effective compensation for signal propagation loss enables resonance after multiple oscillations. At this point, the beam's field forms a low-diffraction-loss, highly focused pattern, automatically aligning the transmitter and receiver. This enables high-precision passive positioning alongside robust uplink and downlink communication. Simulation results demonstrate the proposed system achieves resonance within multiple iterations, supporting uplink and downlink communication up to 5 m, and enabling passive direction of arrival (DOA) estimation with an error under 2$^\circ$ .

eess.SP↗

arXiv2024

Resonant Beam Enabled Passive 3D Positioning

With the rapid development of the internet of things (IoT), location-based services are becoming increasingly prominent in various aspects of social life, and accurate location information is crucial. However, RF-based indoor positioning solutions are severely limited in positioning accuracy due to signal transmission losses and directional difficulties, and optical indoor positioning methods require high propagation conditions. To achieve higher accuracy in indoor positioning, we utilize the principle of resonance to design a triangulation-based resonant beam positioning system (TRBPS) in the RF band. The proposed system employs phase-conjugation antenna arrays and resonance mechanism to achieve energy concentration and beam self-alignment, without requiring active signals from the target for positioning and complex beam control algorithms. Numerical evaluations indicate that TRBPS can achieve millimeter-level accuracy within a range of 3.6 m without the need for additional embedded systems.

eess.SP↗

arXiv2024

Resonant Beam Multi-Target DOA Estimation

With the increasing demand for internet of things (IoT) applications, especially for location-based services, how to locate passive mobile targets (MTs) with minimal beam control has become a challenge. Resonant beam systems are considered promising IoT technologies with advantages such as beam self-alignment and energy concentration. To establish a resonant system in the radio frequency (RF) band and achieve multi-target localization, this paper designs a multi-target resonant system architecture, allowing a single base station (BS) to independently connect with multiple MTs. By employing a retro-directive array, a multi-channel cyclic model is established to realize one-to-many electromagnetic wave propagation and MT direction-of-arrival (DOA) estimation through echo resonance. Simulation results show that the proposed system supports resonant establishment between the BS and multiple MTs. This helps the BS to still have high DOA estimation accuracy in the face of multiple passive MTs, and can ensure that the DOA error is less than 1 degree within a range of 6 meters at a 50degree field of view, with higher accuracy than active beamforming localization systems.

eess.SP↗

arXiv2024

FoV and Efficiency Optimization for Resonant Beam SLIPT with Telescope Integration

Meeting the large bandwidth demands of wireless communication for mobile Internet of Things (IoT) devices while enhancing their endurance is a significant challenge. Simultaneous lightwave information and power transfer (SLIPT) technology offers the potential to realize wireless charging and signal transfer, making it suitable for supporting autonomous vehicles and drones. The resonant beam system (RBS) leverages the self-aligning property of a spatially distributed laser resonator (SSLR), allowing energy transmission from the transmitter to the receiver without mechanical alignment. However, the existing resonant beam SLIPT system exhibits a limited field of view (FoV) and transmission efficiency, facing challenges in practical applications. In this paper, we propose a resonant beam SLIPT system enhanced by incorporating an internal telescope and optimizing the communication, energy transfer, and FoV performance by solving the Pareto front set of the system's achievable performance region. The results indicate that the optimized FoV is increased by $17\%$, reaching $\pm26.8^\circ$, while its average end-to-end efficiency is improved by $145\%$, achieving $5.4\%$.

physics.optics↗

arXiv2024

Single-Frequency Self-Alignment RF Resonant Beam for Information and Power Transfer

Due to power attenuation, improving transmission efficiency in the radio-frequency (RF) band remains a significant challenge, which hinders advancements in various fields of the Internet of Things (IoT), such as wireless power transfer (WPT) and wireless communication. Array design and retro-directive beamforming (RD-BF) techniques offer simple and effective ways to enhance transmission efficiency. However, when the target is an array or in the near field, the RD-BF system (RD-BFS) cannot radiate more energy to the target due to phase irregularities in the target region, resulting in challenges in achieving higher efficiency. To address this issue, we propose the RF-based resonant beam system (RF-RBS), which adaptively optimizes phase and power distribution between transmitting and receiving arrays by leveraging the resonance mechanism to achieve higher transmission efficiency. We analyze the system structure and develop an analytical model to evaluate power flow and resonance establishment. Numerical analysis demonstrates that the proposed RF-RBS achieves self-alignment without beam control and provides higher transmission efficiency compared to RD-BFS, with improvements of up to 16%. This self-alignment capability allows the system to effectively transfer power and information across varying distances and offsets. The numerical results indicate the capability to transmit watt-level power and achieve 21 bps/Hz of downlink spectral efficiency in indoor settings, highlighting the advantages of RF-RBS in information and power transfer for mobile applications.

math.NA↗

arXiv2024

Resonant Beam Enabled DoA Estimation in Passive Positioning System

The rapid advancement of the next generation of communications and internet of things (IoT) technologies has made the provision of location-based services for diverse devices an increasingly pressing necessity. Localizing devices with/without intelligent computing abilities, including both active and passive devices is essential, especially in indoor scenarios. For traditional RF positioning systems, aligning transmission signals and dealing with signal interference in complex environments are inevitable challenges. Therefore, this paper proposed a new passive positioning system, the RF-band resonant beam positioning system (RF-RBPS), which achieves energy concentration and beam alignment by amplifying echoes between the base station (BS) and the passive target (PT), without the need for complex channel estimation and time-consuming beamforming and provides high-precision direction of arrival (DoA) estimation for battery-free targets using the resonant mechanism. The direction information of the PT is estimated using the multiple signal classification (MUSIC) algorithm at the end of BS. The feasibility of the proposed system is validated through theoretical analysis and simulations. Results indicate that the proposed RF-RBPS surpasses RF-band active positioning system (RF-APS) in precision, achieving millimeter-level precision at 2m within an elevation angle of 35$^\circ$, and an error of less than 3cm at 2.5m within an elevation angle of 35$^\circ$.

eess.SP↗

arXiv2022

Binocular Localization Using Resonant Beam

Locating mobile devices precisely in indoor scenarios is a challenging task because of the signal diffraction and reflection in complicated environments. One vital cause deteriorating the localization performance is the inevitable power dissipation along the propagation path of localization signals. In this paper, we propose a high-accuracy localization scheme based on the resonant beam system (RBS) and the binocular vision, i.e., binocular based resonant beam localization (BRBL). The BRBL system utilizes the energy-concentrated and self-aligned transmission of RBS to realize high-efficiency signal propagation and self-positioning for the target. The binocular method is combined with RBS to obtain the three-dimensional (3-D) coordinates of the target for the first time. To exhibit the localization mechanism, we first elaborate on the binocular localization model, including the resonant beam transmission analysis and the geometric derivation of the binocular method with RBS. Then, we establish the power model of RBS, and the signal and noise models of beam spot imaging, respectively, to analyse the performance of the BRBL system. Finally, the numerical results show an outstanding performance of centimeter level accuracy (i.e., $<5\mathrm{cm}$ in $0.4\mathrm{m}$ width and $0.4\mathrm{m}$ length effective range at $1\mathrm{m}$ vertical distance, $<13\mathrm{cm}$ in $0.6\mathrm{m}$ width and $0.6\mathrm{m}$ length effective range at $2\mathrm{m}$ vertical distance), which applies to indoor scenarios.

eess.SP↗

arXiv2022

Charging A Smartphone Over the Air: The Resonant Beam Charging Method

Wireless charging for mobile Internet of Things (IoT) devices such as smartphones is extremely difficult. To reduce energy dissipation during wireless transmission in mobile scenarios, laser or narrow radio beams with sophisticated tracking control are typically required. However, reaching the necessary tracking accuracy and reliability is really difficult. In this paper, inspired by the features of optical resonators and retroreflectors, we develop an experiment on a self-aligned resonant beam charging system for long-distance mobile power transfer. It exploits light resonances inside a double-retroreflector-based spatially separated laser resonator (SSLR), which eliminates the requirement for any kind of tracking control. Focal telecentric cat's eye retroreflectors are employed here. The SSLR was investigated by both theoretical calculation and experiment. We also well assembled the transmitter and the receiver and demonstrated its application in mobile smartphone charging. The results show that above 5-W optical power (also obtained more than 0.6-W electrical power) transferring with negligible diffraction loss to a few-centimeter-size receiver is realized while the receiver moves arbitrarily within 2-m vertical distance and 6° field of view from the transmitter. The maximum horizontal moving range is up to 18cm. This wireless charging system empowers a smartphone in mobile operation with unlimited battery life without the need for a cable.

eess.SP↗

arXiv2021

Retro-Reflective Beam Communications with Spatially Separated Laser Resonator

Optical wireless communications (OWC) utilizing infrared or visible light as the carrier attracts great attention in 6G research. Resonant beam communications (RBCom) is an OWC technology which simultaneously satisfies the needs of non-mechanical mobility and high signal-to-noise ratio~(SNR). It has the self-alignment feature and therefore avoids positioning and pointing operations. However, RBCom undergoes echo interference. Here we propose an echo-interference-free RBCom system design based on second harmonic generation. The transmitter and the receiver constitute a spatially separated laser resonator, in which the retro-reflective resonant beam is formed and tracks the receiver automatically. This structure provides the channel with adaptive capability in beamforming and alignment, which is similar to the concept of intelligent reflecting surface (IRS) enhanced communications, but without hardware and software controllers. Besides, we establish an analytical model to evaluate the beam radius, the beam power, and the channel capacity. The results show that our system achieves longer distance and smaller beam diameter for the transmission beyond 10 Gbit/s, compared with the existing OWC technologies.

eess.SY↗