arXiv subjects

Qiuhao Hu

Publications and source records attributed to Qiuhao Hu.

7 recordsLinked to original sources

arXiv2024

Integrated Power and Thermal Management for Enhancing Energy Efficiency and Battery Life in Connected and Automated Electric Vehicles

Effective power and thermal management are essential for ensuring battery efficiency, safety, and longevity in Connected and Automated Electric Vehicles (CAEVs). However, real-time implementation is challenging due to the multi-timescale dynamics and complex trade-offs between energy consumption, battery degradation, traffic efficiency, and thermal regulation. This paper proposes a novel integrated power and thermal management strategy based on the Multi-Horizon Model Predictive Control (MH-MPC) framework to enhance energy efficiency, optimize battery temperature, ensure traffic safety and efficiency, and reduce battery degradation for CAEVs. The proposed strategy is formulated with a focus on the aging term, allowing it to more effectively manage the trade-offs between energy consumption, battery degradation, and temperature regulation. Moreover, the proposed strategy leverages multi-horizon optimization to achieve substantial improvements, reducing computation time by 7.18%, cooling energy by 14.22%, traction energy by 8.26%, battery degradation loss by over 22%, and battery degradation inconsistency by 36.57% compared to the benchmark strategy. Furthermore, sensitivity analyses of key parameters, including weighting factors, sampling time, and prediction horizons, demonstrate the robustness of the strategy and underscore its potential for practical applications in extending battery lifespan while ensuring safety and efficiency.

eess.SY↗

arXiv2024

Bias-Compensated State of Charge and State of Health Joint Estimation for Lithium Iron Phosphate Batteries

Accurate estimation of the state of charge (SOC) and state of health (SOH) is crucial for the safe and reliable operation of batteries. Voltage measurement bias highly affects state estimation accuracy, especially in Lithium Iron Phosphate (LFP) batteries, which are susceptible due to their flat open-circuit voltage (OCV) curves. This work introduces a bias-compensated algorithm to reliably estimate the SOC and SOH of LFP batteries under the influence of voltage measurement bias. Specifically, SOC and SOH are estimated using the Dual Extended Kalman Filter (DEKF) in the high-slope SOC range, where voltage measurement bias effects are weak. Besides, the voltage measurement biases estimated in the low-slope SOC regions are compensated in the following joint estimation of SOC and SOH to enhance the state estimation accuracy further. Experimental results indicate that the proposed algorithm significantly outperforms the traditional method, which does not consider biases under different temperatures and aging conditions. Additionally, the bias-compensated algorithm can achieve low estimation errors of below 1.5% for SOC and 2% for SOH, even with a 30mV voltage measurement bias. Finally, even if the voltage measurement biases change in operation, the proposed algorithm can remain robust and keep the estimated errors of states around 2%.

eess.SY↗

arXiv2023

Robust Model Predictive Control for Enhanced Fast Charging on Electric Vehicles through Integrated Power and Thermal Management

This paper explores the synergies between integrated power and thermal management (iPTM) and battery charging in an electric vehicle (EV). A multi-objective model predictive control (MPC) framework is developed to optimize the fast charging performance while enforcing the constraints in the power and thermal loops. The approach takes into account the coupling of the battery and cabin thermal management. The case study of a commercial EV demonstrates that the proposed method can effectively meet the requirements of fast charging and thermal management when accurate preview information is available. However, failure to predict the charging event can result in performance degradation with longer charging time. A time-varying weighting strategy is proposed to enhance charging performance in the presence of uncertainty. This strategy leverages the battery state-of-charge (SOC) and adjusts the priority of the multi-objective MPC at different phases during charging. Simulated results using a commercial EV use case show improved robustness in charging time using the proposed strategy.

eess.SY↗

arXiv2021

Experimental Validation of Eco-Driving and Eco-Heating Strategies for Connected and Automated HEVs

This paper presents experimental results that validate eco-driving and eco-heating strategies developed for connected and automated vehicles (CAVs). By exploiting vehicle-to-infrastructure (V2I) communications, traffic signal timing, and queue length estimations, optimized and smoothed speed profiles for the ego-vehicle are generated to reduce energy consumption. Next, the planned eco-trajectories are incorporated into a real-time predictive optimization framework that coordinates the cabin thermal load (in cold weather) with the speed preview, i.e., eco-heating. To enable eco-heating, the engine coolant (as the only heat source for cabin heating) and the cabin air are leveraged as two thermal energy storages. Our eco-heating strategy stores thermal energy in the engine coolant and cabin air while the vehicle is driving at high speeds, and releases the stored energy slowly during the vehicle stops for cabin heating without forcing the engine to idle to provide the heating source. To test and validate these solutions, a power-split hybrid electric vehicle (HEV) has been instrumented for cabin thermal management, allowing to regulate heating, ventilation, and air conditioning (HVAC) system inputs (cabin temperature setpoint and blower flow rate) in real-time. Experiments were conducted to demonstrate the energy-saving benefits of eco-driving and eco-heating strategies over real-world city driving cycles at different cold ambient temperatures. The data confirmed average fuel savings of 14.5% and 4.7% achieved by eco-driving and eco-heating, respectively, offering a combined energy saving of more than 19% when comparing to the baseline vehicle driven by a human driver with a constant-heating strategy.

eess.SY↗

arXiv2020

Engine and Aftertreatment Co-Optimization of Connected HEVs via Multi-Range Vehicle Speed Planning and Prediction

Connected vehicles (CVs) have situational awareness that can be exploited for control and optimization of the powertrain system. While extensive studies have been carried out for energy efficiency improvement of CVs via eco-driving and planning, the implication of such technologies on the thermal responses of CVs has not been fully investigated. One of the key challenges in leveraging connectivity for optimization-based thermal management of CVs is the relatively slow thermal dynamics, which necessitate the use of a long prediction horizon to achieve the best performance. Long-term prediction of the CV speed, unlike the V2V/V2I-based short-range prediction, is difficult and error-prone. The multiple timescales inherent to power and thermal systems call for a variable timescale optimization framework with access to short- and long-term vehicle speed preview. To this end, a model predictive controller (MPC) with a multi-range speed preview for integrated power and thermal management (iPTM) of connected hybrid electric vehicles (HEVs) is presented in this paper. The MPC is formulated to manage the power-split between the engine and the battery while enforcing the power and thermal (engine coolant and catalytic converter temperatures) constraints. The MPC exploits prediction and optimization over a shorter receding horizon and longer shrinking horizon. Over the longer shrinking horizon, the vehicle speed estimation is based on the data collected from the connected vehicles traveling on the same route as the ego-vehicle. Simulation results of applying the MPC over real-world urban driving cycles in Ann Arbor, MI are presented to demonstrate the effectiveness and fuel-saving potentials of the proposed iPTM strategy under the uncertainty associated with long-term predictions of the CV's speed.

eess.SY↗

arXiv2020

Integrated Power and Thermal Management of Connected HEVs via Multi-Horizon MPC

In this paper, a multi-horizon model predictive controller (MH-MPC) is developed for integrated power and thermal management (iPTM) of a power-split hybrid electric vehicle (HEV). The proposed MH-MPC leverages an accurate short-horizon vehicle speed preview and an approximate forecast over a longer shrinking horizon till the end of the driving cycle. This multiple-horizon scheme is developed to cope with fast and slow dynamics associated with power and thermal responses. The main objective of the proposed MH-MPC is to minimize fuel consumption and enforce the power and thermal constraints on the battery state-of-charge and engine coolant temperature, while meeting the driving (traction) and cabin air conditioning (heating) demands. The proposed MH-MPC allows for exploiting the engine coolant as thermal energy storage, providing more flexibility for the HEV energy flow optimization. The simulation results show that the proposed MH-MPC provides near-optimal results in reference to the Dynamic Programming (DP) solution with an affordable computational cost. Moreover, compared with a more conventional MPC strategy, the MH-MPC can leverage the speed previews with different resolutions effectively to achieve the desired performance with satisfactory robustness.

eess.SY↗

arXiv2017

Performance of two-dimensional tidal turbine arrays in free surface flow

Encouraged by recent studies on the performance of tidal turbine arrays, we extend the classical momentum actuator disc theory to include the free surface effects and allow the vertical arrangement of turbines. Most existing literatures concern one dimensional arrays with single turbine in the vertical direction, while the arrays in this work are two dimensional (with turbines in both the vertical and lateral directions) and also partially block the channel which width is far larger than height. The vertical mixing of array scale flow is assumed to take place much faster than lateral one. This assumption has been verified by numerical simulations. Fixing the total turbine area and utilized width, the comparison between two-dimensional and traditional one-dimensional arrays is investigated. The results suggest that the two dimensional arrangements of smaller turbines are preferred to one dimensional arrays from both the power coefficient and efficiency perspectives. When channel dynamics are considered, the power increase would be partly offset according to the parameters of the channel but the optimal arrangement is unchangeable. Furthermore, we consider how to arrange finite number of turbines in a channel. It is shown that an optimal distribution of turbines in two directions is found. Finally, the scenario of arranging turbines in infinite flow, which is the limiting condition of small blockages, is analysed. A new maximum power coefficient 0.869 occurs when $Fr=0.2$, greatly increasing the peak power compared with existing results.

physics.flu-dyn↗