SearcharxivSearch

arXiv subjects

Qixin Chen

Publications and source records attributed to Qixin Chen.

At least 19 recordsLinked to original sources

Real-Time Operation Strategy of Virtual Power Plants With Optimal Power Disaggregation Among Heterogeneous Resources

The virtual power plant (VPP) can aggregate flexible resources on the demand side to provide frequency regulation for the grid, helping address the supply-demand balance challenges. When deploying regulation, the VPP disaggregates the requested power adjustment in real time among its internal heterogeneous resources. Achieving optimal power disaggregation in this process is challenging due to the temporal coupling characteristics of the resources, the uncertain regulation signals, and the requirement for fast response. Therefore, existing research relies on heuristic methods, such as proportional disaggregation, and fails to leverage the heterogeneity of multiple resources. Here, we propose an optimal operation strategy for VPPs to provide regulation, exploiting the complementary characteristics of heterogeneous resources by prioritizing the use of low-cost resources while considering temporal coupling. To reduce the computational overhead of online deployment, we further propose a fast disaggregation algorithm to eliminate the reliance on optimisation solvers. We conducted case studies on the operation of a VPP composed of resources including thermostatically controlled loads and industrial production processes. The results verified the reduced operation cost and increased profit of the VPP under the proposed strategy, with only milliseconds of online computation time. We believe that our work can help better exploit demand-side flexibility.

eess.SY

Production Scheduling Identification: An Inverse Optimization Approach for Industrial Load Modeling Using Smart Meter Data

To cost-effectively manage the supply-demand balance of the power system, the flexibility of industrial users could be harnessed through demand-side response. To minimize the negative impact on the production of industrial users during demand-side response, general-purpose models such as the state-task network (STN) are widely used to model the energy-consuming constraints of industrial production processes. However, the required model parameters cannot be set because the required data are privately owned by industrial users and are not directly available, hindering the accurate modeling of industrial loads. In this paper, we propose production scheduling identification (PSI), an inverse-optimization-based approach for industrial load modeling under incomplete information. In PSI, industrial users' smart meter data are used to identify production scheduling parameters, thus addressing the problem of accurate load modeling when private data are unavailable. We implemented PSI with a modified STN and proposed a practical algorithm to obtain an effective solution. Numerical tests showed that PSI can identify the model parameters of a steel powder plant and a cement plant with acceptable accuracy, using only 21 days of hourly smart meter data. Compared with accurate models established with direct access to private data, the modeling error does not exceed 8.5% and 5.2%, respectively.

eess.SY

Efficient Scheduling of Discrete Industrial Processes Through Continuous Modeling

The resource-task network (RTN) model has been widely applied to represent the technical constraints of complex industrial processes (IPs) such as steel-making, providing the basis for industrial demand response. However, the legacy RTN model contains numerous binary variables and applies different formulations for non-flexible and flexible processes, restricting its computational efficiency and applicability. To systematically improve the computational performance of IP models, we propose continuous RTN model (cRTN), a novel modeling approach that uses continuous variables to represent production tasks and progresses, which are then integrated into unified as well as computationally favorable formulations for the technical constraints in discrete IPs, including resource balance, task execution, waiting time limits, and production targets. Compared to the legacy models, cRTN features fewer binary variables, shorter solving time, and better scalability while maintaining the same accuracy. Numerical tests based on a steel plant demonstrate that cRTN is in typical cases 10 times faster than legacy models and remains tractable with increasing batch sizes, which in legacy models leads to larger problem scales and infeasible solving time. cRTN also achieves a reduction in energy costs by resolving the issue of rounding errors reported in legacy models.

eess.SY

LSTN: A Linear Model of Industrial Production Process for Demand Response

Industrial production modeling provides operational constraints for industrial users participating in demand response (DR) programs. Conventional modeling of the production process introduces binary variables to model the discrete operating points of industrial equipment, which can be computationally infeasible in large-scale DR applications. To reasonably model industrial users' operational constraints while balancing computational complexity and modeling accuracy, we developed a linear model of the industrial production process for evaluating DR applications. Numerical results verify the accuracy of the proposed model and its great improvement in computational efficiency over competing approaches.

eess.SY

Approximating Energy-Regulation Feasible Region of Virtual Power Plants: A Data-driven Inverse Optimization Approach

System operators will probably allow virtual power plants (VPPs) to submit their feasible region (FR) for market clearing and dispatch. A VPP needs to determine its FR to submit as a whole based on the individual operation model of its internal distributed energy resources (DERs), which is an FR aggregation problem. Existing FR aggregation approaches rely on analytical methods, which have issues with generality and adaptability. In this paper, we propose a data-driven approach to approximate the energy-regulation FR of VPPs. It adopts the virtual battery model to approximate the aggregate FR of a VPP and determines the model parameters through inverse optimization based on generated multi-scenario operation data using the original operation model. Numerical tests verified the accuracy of the proposed method. We believe that our work helps to better leverage the flexibility of DERs.

math.OC

Electric Vehicle Charging Right Trading: Concept, Mechanism, and Methodology

With the increasing penetration of electric vehicles (EVs), uncoordinated EV charging and the resulting chaos, disorder, and long waiting times at EV charging stations (EVCSs) will no longer be tolerable. An EV charging right (CR) is the right to reserve a predefined charging service. By purchasing CRs, EVs can reduce their charging waiting time, and the price of CRs can guide EVs toward optimized charging behaviors. In this article, we define CR, propose the CR trading mechanism (CRM), and analyze the effect of CRM on reducing waiting times and mitigating congestion in EV charging. In the proposed CRM, EVs can purchase CRs in advance, and the CRs are used to estimate the waiting time and update the price of charging. Queue theory is utilized in the waiting time estimation, in which the impact of disclosing queue states at EVCSs is considered for the first time. The simulation results verify the accuracy of the waiting time estimation and the effect of the proposed mechanism.

eess.SY

Co-optimizing Bidding and Power Allocation of an EV Aggregator Providing Real-time Frequency Regulation Service

The rapidly expanding scale of electric vehicle (EV) fleets and continuously decreasing battery costs are making vehicle-to-grid services a reality. In this paper, we study the interaction between the problems of an EV aggregator's bidding in the regulation market and power allocation (i.e., determining the (dis)charging powers of the EVs in regulation deployment). Although the two problems are coupled, they are often regarded as decoupled and optimized separately for complexity issues. However, failing to consider the coupling of bidding and power allocation can lead to a decline in the profit of the EV aggregator (EVA). In this paper, we propose a framework for co-optimizing EVA bidding and power allocation in the regulation market. The bidding model is formulated as a stochastic programming problem with embedded power allocation in discretized regulation signal scenarios. To meet the solution time requirement for regulation deployment, we further propose a power allocation model that can be solved online. It utilizes the Lagrange multipliers from the bidding problem to ensure that the allocation results correspond to the optimal solution of the bidding problem. The effect of the proposed framework on improving EVA profits and reducing degradation costs is verified in the case study.

eess.SY

SpineBench: A Clinically Salient, Level-Aware Benchmark Powered by the SpineMed-450k Corpus

Spine disorders affect 619 million people globally and are a leading cause of disability, yet AI-assisted diagnosis remains limited by the lack of level-aware, multimodal datasets. Clinical decision-making for spine disorders requires sophisticated reasoning across X-ray, CT, and MRI at specific vertebral levels. However, progress has been constrained by the absence of traceable, clinically-grounded instruction data and standardized, spine-specific benchmarks. To address this, we introduce SpineMed, an ecosystem co-designed with practicing spine surgeons. It features SpineMed-450k, the first large-scale dataset explicitly designed for vertebral-level reasoning across imaging modalities with over 450,000 instruction instances, and SpineBench, a clinically-grounded evaluation framework. SpineMed-450k is curated from diverse sources, including textbooks, guidelines, open datasets, and ~1,000 de-identified hospital cases, using a clinician-in-the-loop pipeline with a two-stage LLM generation method (draft and revision) to ensure high-quality, traceable data for question-answering, multi-turn consultations, and report generation. SpineBench evaluates models on clinically salient axes, including level identification, pathology assessment, and surgical planning. Our comprehensive evaluation of several recently advanced large vision-language models (LVLMs) on SpineBench reveals systematic weaknesses in fine-grained, level-specific reasoning. In contrast, our model fine-tuned on SpineMed-450k demonstrates consistent and significant improvements across all tasks. Clinician assessments confirm the diagnostic clarity and practical utility of our model's outputs.

cs.CV

Computation-power Coupled Modeling for IDCs and Collaborative Optimization in ADNs

The batch and online workload of Internet data centers (IDCs) offer temporal and spatial scheduling flexibility. Given that power generation costs vary over time and location, harnessing the flexibility of IDCs' energy consumption through workload regulation can optimize the power flow within the system. This paper focuses on multi-geographically distributed IDCs managed by an Internet service company (ISC), which are aggregated as a controllable load. The load flexibility resulting from spatial load regulation of online workload is taken into account. A two-step workload scheduling mechanism is adopted, and a computation-power coupling model of ISC is established to facilitate collaborative optimization in active distribution networks (ADNs). To address the model-solving problem based on the assumption of scheduling homogeneity, a model reconstruction method is proposed. An efficient iterative algorithm is designed to solve the reconstructed model. Furthermore, the Nash bargaining solution is employed to coordinate the different optimization objectives of ISC and power system operators, thereby avoiding subjective arbitrariness. Experimental cases based on a 33-node distribution system are designed to verify the effectiveness of the model and algorithm in optimizing ISC's energy consumption and power flow within the system.

eess.SY

A Data-Driven Pool Strategy for Price-Makers Under Imperfect Information

This paper studies the pool strategy for price-makers under imperfect information. In this occasion, market participants cannot obtain essential transmission parameters of the power system. Thus, price-makers should estimate the market results with respect to their offer curves using available historical information. The linear programming model of economic dispatch is analyzed with the theory of rim multi-parametric linear programming (rim-MPLP). The characteristics of system patterns (combinations of status flags for generating units and transmission lines) are revealed. A multi-class classification model based on support vector machine (SVM) is trained to map the offer curves to system patterns, which is then integrated into the decision framework of the price-maker. The performance of the proposed method is validated on the IEEE 30-bus system, Illinois synthetic 200-bus system, and South Carolina synthetic 500-bus system.

eess.SY

Optimal Energy Dispatch of Grid-Connected Electric Vehicle Considering Lithium Battery Electrochemical Model

The grid-connected electric vehicles (EVs) serve as a promising regulating resource in the distribution grid with Vehicle-to-Grid (V2G) facilities. In the day-ahead stage, electric vehicle batteries (EVBs) need to be precisely dispatched and controlled to ensure high efficiency and prevent degradation. This article focuses on considering a refined battery model, i.e. the electrochemical model (EM), in the optimal dispatch of the local energy system with high penetration of EVs which replenish energy through V2G-equipped charge station and battery swapping station (BSS). In this paper, to utilize the EM efficiently, recursive EVB constraints and a corresponding matrix-based state update method are proposed based on EM power characterization. The charging EV state distribution is profiled and a multi-layer BSS model along with binary aggregation is proposed, in order to overcome the computation complexity of combining the refined battery constraints with the mixed integer optimization. Finally, a local energy system scenario is investigated for evaluation. The efficiency and effectiveness of EM consideration are assessed from the perspective of both the system and battery.

eess.SY

Unsupervised Congestion Status Identification Using LMP Data

Having a better understanding of how locational marginal prices (LMPs) change helps in price forecasting and market strategy making. This paper investigates the fundamental distribution of the congestion part of LMPs in high-dimensional Euclidean space using an unsupervised approach. LMP models based on the lossless and lossy DC optimal power flow (DC-OPF) are analyzed to show the overlapping subspace property of the LMP data. The congestion part of LMPs is spanned by certain row vectors of the power transfer distribution factor (PTDF) matrix, and the subspace attributes of an LMP vector uniquely are found to reflect the instantaneous congestion status of all the transmission lines. The proposed method searches for the basis vectors that span the subspaces of congestion LMP data in hierarchical ways. In the bottom-up search, the data belonging to 1-dimensional subspaces are detected, and other data are projected on the orthogonal subspaces. This procedure is repeated until all the basis vectors are found or the basis gap appears. Top-down searching is used to address the basis gap by hyperplane detection with outliers. Once all the basis vectors are detected, the congestion status can be identified. Numerical experiments based on the IEEE 30-bus system, IEEE 118-bus system, Illinois 200-bus system, and Southwest Power Pool are conducted to show the performance of the proposed method.

eess.SY

A Novel Combined Data-Driven Approach for Electricity Theft Detection

The two-way flow of information and energy is an important feature of the Energy Internet. Data analytics is a powerful tool in the information flow that aims to solve practical problems using data mining techniques. As the problem of electricity thefts via tampering with smart meters continues to increase, the abnormal behaviors of thefts become more diversified and more difficult to detect. Thus, a data analytics method for detecting various types of electricity thefts is required. However, the existing methods either require a labeled dataset or additional system information which is difficult to obtain in reality or have poor detection accuracy. In this paper, we combine two novel data mining techniques to solve the problem. One technique is the Maximum Information Coefficient (MIC), which can find the correlations between the non-technical loss (NTL) and a certain electricity behavior of the consumer. MIC can be used to precisely detect thefts that appear normal in shapes. The other technique is the clustering technique by fast search and find of density peaks (CFSFDP). CFSFDP finds the abnormal users among thousands of load profiles, making it quite suitable for detecting electricity thefts with arbitrary shapes. Next, a framework for combining the advantages of the two techniques is proposed. Numerical experiments on the Irish smart meter dataset are conducted to show the good performance of the combined method.

eess.SY

Coherent Hierarchical Probabilistic Forecasting of Electric Vehicle Charging Demand

The growing penetration of electric vehicles (EVs) significantly changes typical load curves in smart grids. With the development of fast charging technology, the volatility of EV charging demand is increasing, which requires additional flexibility for real-time power balance. The forecasting of EV charging demand involves probabilistic modeling of high dimensional time series dynamics across diverse electric vehicle charging stations (EVCSs). This paper studies the forecasting problem of multiple EVCS in a hierarchical probabilistic manner. For each charging station, a deep learning model based on a partial input convex neural network (PICNN) is trained to predict the day-ahead charging demand's conditional distribution, preventing the common quantile crossing problem in traditional quantile regression models. Then, differentiable convex optimization layers (DCLs) are used to reconcile the scenarios sampled from the distributions to yield coherent scenarios that satisfy the hierarchical constraint. It learns a better weight matrix for adjusting the forecasting results of different targets in a machine-learning approach compared to traditional optimization-based hierarchical reconciling methods. Numerical experiments based on real-world EV charging data are conducted to demonstrate the efficacy of the proposed method.

eess.SY

Connection-Aware P2P Trading: Simultaneous Trading and Peer Selection

Peer-to-peer (P2P) trading is seen as a viable solution to handle the growing number of distributed energy resources in distribution networks. However, when dealing with large-scale consumers, there are several challenges that must be addressed. One of these challenges is limited communication capabilities. Additionally, prosumers may have specific preferences when it comes to trading. Both can result in serious asynchrony in peer-to-peer trading, potentially impacting the effectiveness of negotiations and hindering convergence before the market closes. This paper introduces a connection-aware P2P trading algorithm designed for extensive prosumer trading. The algorithm facilitates asynchronous trading while respecting prosumer's autonomy in trading peer selection, an often overlooked aspect in traditional models. In addition, to optimize the use of limited connection opportunities, a smart trading peer connection selection strategy is developed to guide consumers to communicate strategically to accelerate convergence. A theoretical convergence guarantee is provided for the connection-aware P2P trading algorithm, which further details how smart selection strategies enhance convergence efficiency. Numerical studies are carried out to validate the effectiveness of the connection-aware algorithm and the performance of smart selection strategies in reducing the overall convergence time.

eess.SY

Reinforcement Learning Based Bidding Framework with High-dimensional Bids in Power Markets

Over the past decade, bidding in power markets has attracted widespread attention. Reinforcement Learning (RL) has been widely used for power market bidding as a powerful AI tool to make decisions under real-world uncertainties. However, current RL methods mostly employ low dimensional bids, which significantly diverge from the N price-power pairs commonly used in the current power markets. The N-pair bidding format is denoted as High Dimensional Bids (HDBs), which has not been fully integrated into the existing RL-based bidding methods. The loss of flexibility in current RL bidding methods could greatly limit the bidding profits and make it difficult to tackle the rising uncertainties brought by renewable energy generations. In this paper, we intend to propose a framework to fully utilize HDBs for RL-based bidding methods. First, we employ a special type of neural network called Neural Network Supply Functions (NNSFs) to generate HDBs in the form of N price-power pairs. Second, we embed the NNSF into a Markov Decision Process (MDP) to make it compatible with most existing RL methods. Finally, experiments on Energy Storage Systems (ESSs) in the PJM Real-Time (RT) power market show that the proposed bidding method with HDBs can significantly improve bidding flexibility, thereby improving the profit of the state-of-the-art RL bidding methods.

cs.LG

Goal-Oriented Wireless Communication Resource Allocation for Cyber-Physical Systems

The proliferation of novel industrial applications at the wireless edge, such as smart grids and vehicle networks, demands the advancement of cyber-physical systems. The performance of CPSs is closely linked to the last-mile wireless communication networks, which often become bottlenecks due to their inherent limited resources. Current CPS operations often treat wireless communication networks as unpredictable and uncontrollable variables, ignoring the potential adaptability of wireless networks, which results in inefficient and overly conservative CPS operations. Meanwhile, current wireless communications often focus more on throughput and other transmission-related metrics instead of CPS goals. In this study, we introduce the framework of goal-oriented wireless communication resource allocations, accounting for the semantics and significance of data for CPS operation goals. This guarantees optimal CPS performance from a cybernetic standpoint. We formulate a bandwidth allocation problem aimed at maximizing the information utility gain of transmitted data brought to CPS operation goals. Since the goal-oriented bandwidth allocation problem is a large-scale combinational problem, we propose a divide-and-conquer and greedy solution algorithm. The information utility gain is first approximately decomposed into marginal utility information gains and computed in a parallel manner. Subsequently, the bandwidth allocation problem is reformulated as a knapsack problem, which can be further solved greedily with a guaranteed sub-optimality gap. We further demonstrate how our proposed goal-oriented bandwidth allocation algorithm can be applied in four potential CPS applications, including data-driven decision-making, edge learning, federated learning, and distributed optimization.

eess.SP

High-dimensional Bid Learning for Energy Storage Bidding in Energy Markets

With the growing penetration of renewable energy resource, electricity market prices have exhibited greater volatility. Therefore, it is important for Energy Storage Systems(ESSs) to leverage the multidimensional nature of energy market bids to maximize profitability. However, current learning methods cannot fully utilize the high-dimensional price-quantity bids in the energy markets. To address this challenge, we modify the common reinforcement learning(RL) process by proposing a new bid representation method called Neural Network Embedded Bids (NNEBs). NNEBs refer to market bids that are represented by monotonic neural networks with discrete outputs. To achieve effective learning of NNEBs, we first learn a neural network as a strategic mapping from the market price to ESS power output with RL. Then, we re-train the network with two training modifications to make the network output monotonic and discrete. Finally, the neural network is equivalently converted into a high-dimensional bid for bidding. We conducted experiments over real-world market datasets. Our studies show that the proposed method achieves 18% higher profit than the baseline and up to 78% profit of the optimal market bidder.

eess.SY