arXiv subjects

Qiyuan Fu

Publications and source records attributed to Qiyuan Fu.

11 recordsLinked to original sources

arXiv2026

Importance and methods to control, vary, and characterize mud strength for studying locomotion

Animals and robots encounter mud at the water-land interface. Like sand, mud can stay solid or flow like a fluid. Unlike sand, the yield strength of mud at which solid-fluid transitions occur depends on not only the amount of solid relative to fluid (water in mud, air in dry sand), but also how much coarse grains and fine clay are within the solid. Despite understanding of locomotion on/within dry sand dominated by coarse grains with repulsive normal forces and friction, little is known for mud dominated by fine clay with strong cohesion. Here, we developed methods to prepare uniform mud of controlled, variable yield strength and characterize and track its drift from water evaporation. Compared to other flowable substrates, mud strength measured by upward force during penetration is weaker and can vary more, and mud sticks more during extraction to pull downward, making it more challenging for locomotion.

physics.bio-ph↗

arXiv2026

Polymander II: an amphibious salamander-inspired robot with contact and flow sensors

Robots benefit from sensory information to coordinate body movement, gain robustness against perturbations, and transition between different modes to adapt to various terrains. However, few amphibious robots can sense interactions with both terrestrial and aquatic environments. In this paper, we present a solution that uses Hall-effect sensors to sense foot contact forces and lateral hydrodynamic forces on a salamander-inspired amphibious robot. With two bus lines, the robot can simultaneously acquire this exteroceptive information at more than 500 Hz and proprioceptive information, such as joint positions and loads, at 100 Hz. The Hall-effect sensors used are compact, making them suitable for embedding in multiple positions within a robot, and exhibit high sensitivity to small forces. Moreover, because the sensor can be positioned separately from the measured object, waterproofing can be implemented with relative ease. Our tests demonstrate the robot's capabilities in traversing amphibious environments and its potential in using feedback control for more complex locomotion tasks.

cs.RO↗

arXiv2026

Learning Whole-Body Control for a Salamander Robot

Amphibious legged robots inspired by salamanders are promising in applications in complex amphibious environments. However, despite the significant success of training controllers that achieve diverse locomotion behaviors in conventional quadrupedal robots, most salamander robots relied on central-pattern-generator (CPG)-based and model-based coordination strategies for locomotion control. Learning unified joint-level whole-body control that reliably transfers from simulation to highly articulated physical salamander robots remains relatively underexplored. In addition, few legged robots have tried learning-based controllers in amphibious environments. In this work, we employ Reinforcement Learning to map proprioceptive observations and commanded velocities to joint-level actions, allowing coordinated locomotor behaviors to emerge. To deploy these policies on hardware, we adopt a system-level real-to-sim matching and sim-to-real transfer strategy. The learned controller achieves stable and coordinated walking on both flat and uneven terrains in the real world. Beyond terrestrial locomotion, the framework enables transitions between walking and swimming in simulation, highlighting a phenomenon of interest for understanding locomotion across distinct physical modes.

cs.RO↗

arXiv2023

Snake and Snake Robot Locomotion in Complex, 3-D Terrain

Snakes can traverse almost all types of environments by bending their elongate bodies in 3-D to interact with the terrain. Similarly, a snake robot is a promising platform to perform critical tasks in various environments. Understanding how 3-D body bending effectively interacts with the terrain for propulsion and stability can not only inform how snakes traverse natural environments, but also allow snake robots to achieve similar performance. How snakes and snake robots move on flat surfaces has been understood well. However, such ideal terrain is rare in natural environments and little was understood about how to generate propulsion and maintain stability in 3-D terrain, except for some studies on arboreal snake locomotion and on robots using geometric planning. To bridge the knowledge gap, we integrated animal experiments and robotic studies in three representative environments: a large smooth step, an uneven arena of blocks of large height variation, and large bumps. We discovered that vertical body bending induces stability challenges but can generate large propulsion. When traversing a large smooth step, a snake robot is challenged by roll instability that increases with the amplitude of vertical bending. The instability can be reduced by body compliance that statistically improves body-terrain contact. Despite this, vertical body bending can potentially allow snakes to push against terrain for propulsion, as demonstrated by corn snakes traversing an uneven arena. A snake robot can generate large propulsion like this if contact is well maintained. Contact feedback control can help accommodate perturbations such as novel terrain geometry or excessive external forces by improving contact. Our findings provide insights into how snakes and snake robots can use vertical body bending for efficient and versatile traversal of the 3-D world stably.

physics.bio-ph↗

arXiv2022

Simulation of snakes using vertical body bending to traverse terrain with large height variation

Snake moves across various terrains by bending its elongated body. Recent studies discovered that snakes can use vertical bending to traverse terrain of large height variation, such as horizontally oriented cylinders, a wedge (Jurestovsky, Usher, Astley, 2021, J. Exp. Biol.), and uneven terrain (Fu & Li, 2020, Roy. Soc. Open Sci.; Fu, Astley, Li, 2022 Bioinspiration & Biomimetics). Here, to understand how vertical bending generates propulsion, we developed a dynamic simulation of a snake traversing a wedge (height = 0.05 body length, slope = 27 degrees) and a half cylindrical obstacle (height = 0.1 body length). By propagating down the body an internal torque profile with a maximum around the obstacle, the simulated snake moved forward as observed in the animal. Remarkably, even when frictional drag is low (snake-terrain kinetic friction coefficient of 0.20), the body must push against the wedge with a pressure 5 times that from body weight to generate sufficient forward propulsion to move forward. This indicated that snakes are highly capable of bending vertically to push against the environment to generate propulsion. Testing different controllers revealed that contact force feedback further helps generate and maintain propulsion effectively under unknown terrain perturbations.

q-bio.QM↗

arXiv2021

Snakes combine vertical and lateral bending to traverse uneven terrain

Terrestrial locomotion requires generating appropriate ground reaction forces which depend on substrate geometry and physical properties. The richness of positions and orientations of terrain features in the 3-D world gives limbless animals like snakes that can bend their body versatility to generate forces from different contact areas for propulsion. Despite many previous studies of how snakes use lateral body bending for propulsion on relatively flat surfaces with lateral contact points, little is known about whether and how much snakes use vertical body bending in combination with lateral bending in 3-D terrain. This lack had contributed to snake robots being inferior to animals in stability, efficiency, and versatility when traversing complex 3-D environments. Here, to begin to elucidate this, we studied how the generalist corn snake traversed an uneven arena of blocks of random height variation 5 times its body height. The animal traversed the uneven terrain with perfect stability by propagating 3-D bending down its body with little transverse motion (11{\deg} slip angle). Although the animal preferred moving through valleys with higher neighboring blocks, it did not prefer lateral bending. Among body-terrain contact regions that potentially provide propulsion, 52% were formed by vertical body bending and 48% by lateral bending. The combination of vertical and lateral bending may dramatically expand the sources of propulsive forces available to limbless locomotors by utilizing various asperities available in 3-D terrain. Direct measurements of contact forces are necessary to further understand how snakes coordinate 3-D bending along the entire body via sensory feedback to propel through 3-D terrain. These studies will open a path to new propulsive mechanisms for snake robots, potentially increasing the performance and versatility in 3-D terrain.

physics.bio-ph↗

arXiv2021

Contact feedback helps snake robots propel against uneven terrain using vertical bending

Snakes can bend their elongate bodies in various forms to traverse various environments. We understand how snakes use lateral bending to push against asperities on flat ground for propulsion, and snake robots can do so effectively. However, snakes can also use vertical bending to push against terrain of large height variation for propulsion, and they can adjust it to adapt to novel terrain presumably using mechano-sensing feedback control. Although some snake robots can traverse uneven terrain, few have used vertical bending for propulsion, and how to control it in novel environments is poorly understood. Here we systematically studied a snake robot with force sensors pushing against large bumps using vertical bending to understand the role of sensory feedback control. We compared a feedforward controller and four feedback controllers that use different senses and generate distinct bending patterns and body-terrain interaction. We challenged the robot with increasing backward load and novel terrain geometry that break its contact with the terrain. We further varied how much the feedback control modulated bending to conform to or push against the terrain to test their effects. Feedforward propagation of vertical bending generated large propulsion when the shape matched terrain geometry. However, when perturbations caused loss of contact, the robot easily lost propulsion or had motor overload. Contact feedback control resolved these by improving contact. Yet excessive conformation interrupted propagation and excessive pushing stalled motors. Unlike that using lateral bending, for propulsion generation using vertical bending, body weight can help maintain contact with the environment but may also overload motors. Our results will help snake robots better traverse terrain with large height variation and can inform how snakes use sensory feedback to control vertical bending for propulsion.

physics.bio-ph↗

arXiv2021

SenSnake: A snake robot with contact force sensing for studying locomotion in complex 3-D terrain

Despite advances in a diversity of environments, snake robots are still far behind snakes in traversing complex 3-D terrain with large obstacles. This is due to a lack of understanding of how to control 3-D body bending to push against terrain features to generate and control propulsion. Biological studies suggested that generalist snakes use contact force sensing to adjust body bending in real time to do so. However, studying this sensory-modulated force control in snakes is challenging, due to a lack of basic knowledge of how their force sensing organs work. Here, we take a robophysics approach to make progress, starting by developing a snake robot capable of 3-D body bending with contact force sensing to enable systematic locomotion experiments and force measurements. Through two development and testing iterations, we created a 12-segment robot with 36 piezo-resistive sheet sensors distributed on all segments with compliant shells with a sampling frequency of 30 Hz. The robot measured contact forces while traversing a large obstacle using vertical bending with high repeatability, achieving the goal of providing a platform for systematic experiments. Finally, we explored model-based calibration considering the viscoelastic behavior of the piezo-resistive sensor, which will for useful for future studies.

cs.RO↗

arXiv2021

Continuous body 3-D reconstruction of limbless animals

Limbless animals such as snakes, limbless lizards, worms, eels, and lampreys move their slender, long bodies in three dimensions to traverse diverse environments. Accurately quantifying their continuous body's 3-D shape and motion is important for understanding body-environment interactions in complex terrain, but this is difficult to achieve (especially for local orientation and rotation). Here, we describe an interpolation method to quantify continuous body 3-D position and orientation. We simplify the body as an elastic rod and apply a backbone optimization method to interpolate continuous body shape between end constraints imposed by tracked markers. Despite over-simplifying the biomechanics, our method achieves a higher interpolation accuracy (~50% error) in both 3-D position and orientation compared with the widely-used cubic B-spline interpolation method. Beyond snakes traversing large obstacles as demonstrated, our method applies to other long, slender, limbless animals and continuum robots. We provide codes and demo files for easy application of our method.

physics.bio-ph↗

arXiv2020

Lateral oscillation and body compliance help snakes and snake robots stably traverse large, smooth obstacles

Snakes can move through almost any terrain. Similarly, snake robots hold the promise as a versatile platform to traverse complex environments like earthquake rubble. Unlike snake locomotion on flat surfaces which is inherently stable, when snakes traverse complex terrain by deforming their body out of plane, it becomes challenging to maintain stability. Here, we review our recent progress in understanding how snakes and snake robots traverse large, smooth obstacles that lack anchor points for gripping or bracing. First, we discovered that the generalist variable kingsnake combines lateral oscillation and cantilevering. Regardless of step height and surface friction, the overall gait is preserved. Next, to quantify static stability of the snake, we developed a method to interpolate continuous body in three dimensions (both position and orientation) between discrete tracked markers. By analyzing the base of support using the interpolated continuous body 3-D kinematics, we discovered that the snake maintained perfect stability during traversal, even on the most challenging low friction, high step. Finally, we applied this gait to a snake robot and systematically tested its performance traversing large steps with variable heights to further understand stability principles. The robot rapidly and stably traversed steps nearly as high as a third of its body length. As step height increased, the robot rolled more frequently to the extent of flipping over, reducing traversal probability. The absence of such failure in the snake with a compliant body inspired us to add body compliance to the robot. With better surface contact, the compliant body robot suffered less roll instability and traversed high steps at higher probability, without sacrificing traversal speed. Our robot traversed large step-like obstacles more rapidly than most previous snake robots, approaching that of the animal.

physics.bio-ph↗

arXiv2020

Robotic modeling of snake traversing large, smooth obstacles reveals stability benefits of body compliance

Snakes can move through almost any terrain. Although their locomotion on flat surfaces using planar gaits is inherently stable, when snakes deform their body out of plane to traverse complex terrain, maintaining stability becomes a challenge. On trees and desert dunes, snakes grip branches or brace against depressed sand for stability. However, how they stably surmount obstacles like boulders too large and smooth to gain such anchor points is less understood. Similarly, snake robots are challenged to stably traverse large, smooth obstacles for search and rescue and building inspection. Our recent study discovered that snakes combine body lateral undulation and cantilevering to stably traverse large steps. Here, we developed a snake robot with this gait and snake-like anisotropic friction and used it as a physical model to understand stability principles. The robot traversed steps as high as a third of its body length rapidly and stably. However, on higher steps, it was more likely to fail due to more frequent rolling and flipping over, which was absent in the snake with a compliant body. Adding body compliance reduced the robot roll instability by statistically improving surface contact, without reducing speed. Besides advancing understanding of snake locomotion, our robot achieved high traversal speed surpassing most previous snake robots and approaching snakes, while maintaining high traversal probability.

physics.bio-ph↗