arXiv subjects

Quentin Le Lidec

Publications and source records attributed to Quentin Le Lidec.

18 recordsLinked to original sources

arXiv2026

LeVJEPA: Efficient & Scalable Video Pretraining without the Heuristics

Video carries the temporal structure of the physical world, yet learning representations from it has remained computationally expensive: prevailing self-supervised methods either prevent representation collapse through architectural asymmetries, coupling an exponential-moving-average target encoder, a stop-gradient, and a capacity-limited predictor, or circumvent it by reconstructing masked content in pixel space. We introduce LeVJEPA, the first video encoder trained under LeJEPA's collapse-free objective, which dispenses with both. A single encoder is trained with an invariance loss over global and local views of a clip, regularized by SIGReg, which excludes collapse with a provable guarantee. The architecture reduces to an encoder and a projector, and the objective to a single hyperparameter. This formulation admits two properties. First, the cost of pretraining is governed by the number of tokens the encoder observes; uniform random token dropping renders this number small while simultaneously improving downstream accuracy. At matched epochs on identical data, LeVJEPA matches or surpasses V-JEPA 2 across ViT-S/B/L at 5.6 to 20.8x less pretraining compute, and at matched total FLOPs it exceeds the strongest video baseline by 7.6 points on ImageNet-1K while remaining competitive on motion-centric benchmarks. Second, since no asymmetry between branches is required, the encoder can be trained with block-causal attention at no measurable accuracy cost: temporal ordering becomes a property of the encoder itself. Against a compute-matched DINOv2 trained on frames of the same videos, LeVJEPA approaches the image-pretrained encoder on appearance-centric evaluation while nearly doubling its motion-centric accuracy. These results indicate that, once its computational overhead is removed, video becomes a viable and in several respects preferable substrate for general-purpose visual pretraining.

cs.CV↗

arXiv2026

LpWM: A Case for Sparse Representations in World Models

Joint-embedding predictive architectures (JEPAs) learn latent dynamics for planning and avoid representation collapse by matching features to maximum-entropy distributions such as isotropic Gaussians, yielding dense representations. However, it is unclear whether dense representations are the most favorable geometry for modeling dynamics. In this work, we ask whether a different geometry, sparse representations, can make action-conditioned latent dynamics easier to model, and what dynamical structure emerges from such representations. We first show that nonlinear Lipschitz dynamics can be approximated arbitrarily well by action-conditioned linear dynamics in a sufficiently high-dimensional one-hot latent space, with rollout error vanishing as the dimension grows. This motivates distributed sparse representations as a practical relaxation of one-hot sparsity. We introduce LpWorldModel (LpWM), a JEPA model regularized with Rectified Distribution Matching Regularization (RDMReg) to match encoder features to a Rectified Generalized Gaussian distribution, yielding non-negative sparse codes. Empirically, sparsity lowers the predictor complexity required for successful planning: on PushT, sparse LpWM outperforms dense LeWM by up to 57% in planning success at intermediate predictor capacities. This advantage also extends beyond Gaussian distribution matching, with LpWM outperforming dense VICReg representations across multiple predictor families. We further find that the learned sparse representations are mode-factored, with support encoding discrete dynamical regimes and feature magnitudes capturing continuous within-regime state. Together, these results suggest that sparse representations can reduce the predictor complexity required for control while revealing interpretable structure.

cs.LG↗

arXiv2026

stable-worldmodel: A Platform for Reproducible World Modeling Research and Evaluation

World models are central to building agents that can reason, plan, and generalize beyond their training data. However, research on world models is currently fragmented, with disparate codebases, data pipelines, and evaluation protocols hindering reproducibility and fair comparison. Current practice is further limited by three key bottlenecks: fragile one-off codebases, slow video data loading, and the lack of standardized generalization benchmarks. We present stable-worldmodel (swm), an open-source platform for standardized and reproducible world modeling research and evaluation. It delivers (1) a high-performance Lance-based data layer with native support and conversion tools for MP4, HDF5, and LeRobot datasets, (2) clean, well-tested implementations of modern world model baselines and planning solvers, and (3) a broad suite of environments and tasks extended with controllable visual, geometric, and physical factors of variation for systematic in-silico evaluation of dynamics understanding, control performance, representation quality, and out-of-distribution generalization. By unifying the full pipeline under a single, scalable framework, \texttt{swm} dramatically reduces research overhead and accelerates trustworthy progress toward reliable world models.

cs.LG↗

arXiv2026

Accelerating trajectory optimization with Sobolev-trained diffusion policies

Trajectory Optimization (TO) solvers exploit known system dynamics to compute locally optimal trajectories through iterative improvements. A downside is that each new problem instance is solved independently; therefore, convergence speed and quality of the solution found depend on the initial trajectory proposed. To improve efficiency, a natural approach is to warm-start TO with initial guesses produced by a learned policy trained on trajectories previously generated by the solver. Diffusion-based policies have recently emerged as expressive imitation learning models, making them promising candidates for this role. Yet, a counterintuitive challenge comes from the local optimality of TO demonstrations: when a policy is rolled out, small non-optimal deviations may push it into situations not represented in the training data, triggering compounding errors over long horizons. In this work, we focus on learning-based warm-starting for gradient-based TO solvers that also provide feedback gains. Exploiting this specificity, we derive a first-order loss for Sobolev learning of diffusion-based policies using both trajectories and feedback gains. Through comprehensive experiments, we demonstrate that the resulting policy avoids compounding errors, and so can learn from very few trajectories to provide initial guesses reducing solving time by $2\times$ to $20 \times$. Incorporating first-order information enables predictions with fewer diffusion steps, reducing inference latency.

cs.LG↗

arXiv2026

LeWorldModel: Stable End-to-End Joint-Embedding Predictive Architecture from Pixels

Joint Embedding Predictive Architectures (JEPAs) offer a compelling framework for learning world models in compact latent spaces, yet existing methods remain fragile, relying on complex multi-term losses, exponential moving averages, pre-trained encoders, or auxiliary supervision to avoid representation collapse. In this work, we introduce LeWorldModel (LeWM), the first JEPA that trains stably end-to-end from raw pixels using only two loss terms: a next-embedding prediction loss and a regularizer enforcing Gaussian-distributed latent embeddings. This reduces tunable loss hyperparameters from six to one compared to the only existing end-to-end alternative. With ~15M parameters trainable on a single GPU in a few hours, LeWM plans up to 48x faster than foundation-model-based world models while remaining competitive across diverse 2D and 3D control tasks. Beyond control, we show that LeWM's latent space encodes meaningful physical structure through probing of physical quantities. Surprise evaluation confirms that the model reliably detects physically implausible events.

cs.LG↗

arXiv2026

Causal-JEPA: Learning World Models through Object-Level Latent Masking

World models require robust relational understanding to support prediction, reasoning, and control. While object-centric representations provide a useful abstraction, they are not sufficient to capture interaction-dependent dynamics. We therefore propose C-JEPA, a simple and flexible object-centric world model that extends masked joint embedding prediction from image patches to object-centric representations. By masking object-level latents and requiring each masked object state to be inferred from the surrounding context, C-JEPA imposes structured partial observability during training, creating counterfactual-like prediction queries that discourage shortcut solutions and make interaction-dependent prediction necessary under the learning objective. Empirically, C-JEPA leads to consistent gains in visual question answering, with an absolute improvement of about 20% in counterfactual reasoning over the same architecture without object-level masking. On agent control tasks, C-JEPA enables substantially more efficient planning by using only 1% of the total latent input features required by patch-based world models, while achieving comparable performance. Finally, we provide a formal analysis demonstrating that object-level masking induces useful inductive bias by controlling observability. Our code is available at https://github.com/galilai-group/cjepa.

cs.AI↗

arXiv2026

stable-worldmodel-v1: Reproducible World Modeling Research and Evaluation

World Models have emerged as a powerful paradigm for learning compact, predictive representations of environment dynamics, enabling agents to reason, plan, and generalize beyond direct experience. Despite recent interest in World Models, most available implementations remain publication-specific, severely limiting their reusability, increasing the risk of bugs, and reducing evaluation standardization. To mitigate these issues, we introduce stable-worldmodel (SWM), a modular, tested, and documented world-model research ecosystem that provides efficient data-collection tools, standardized environments, planning algorithms, and baseline implementations. In addition, each environment in SWM enables controllable factors of variation, including visual and physical properties, to support robustness and continual learning research. Finally, we demonstrate the utility of SWM by using it to study zero-shot robustness in DINO-WM.

cs.AI↗

arXiv2025

Value-guided action planning with JEPA world models

Building deep learning models that can reason about their environment requires capturing its underlying dynamics. Joint-Embedded Predictive Architectures (JEPA) provide a promising framework to model such dynamics by learning representations and predictors through a self-supervised prediction objective. However, their ability to support effective action planning remains limited. We propose an approach to enhance planning with JEPA world models by shaping their representation space so that the negative goal-conditioned value function for a reaching cost in a given environment is approximated by a distance (or quasi-distance) between state embeddings. We introduce a practical method to enforce this constraint during training and show that it leads to significantly improved planning performance compared to standard JEPA models on simple control tasks.

cs.LG↗

arXiv2025

Differentiable Simulation of Soft Robots with Frictional Contacts

In recent years, soft robotics simulators have evolved to offer various functionalities, including the simulation of different material types (e.g., elastic, hyper-elastic) and actuation methods (e.g., pneumatic, cable-driven, servomotor). These simulators also provide tools for various tasks, such as calibration, design, and control. However, efficiently and accurately computing derivatives within these simulators remains a challenge, particularly in the presence of physical contact interactions. Incorporating these derivatives can, for instance, significantly improve the convergence speed of control methods like reinforcement learning and trajectory optimization, enable gradient-based techniques for design, or facilitate end-to-end machine-learning approaches for model reduction. This paper addresses these challenges by introducing a unified method for computing the derivatives of mechanical equations within the finite element method framework, including contact interactions modeled as a nonlinear complementarity problem. The proposed approach handles both collision and friction phases, accounts for their nonsmooth dynamics, and leverages the sparsity introduced by mesh-based models. Its effectiveness is demonstrated through several examples of controlling and calibrating soft systems.

cs.RO↗

arXiv2024

End-to-End and Highly-Efficient Differentiable Simulation for Robotics

Over the past few years, robotics simulators have largely improved in efficiency and scalability, enabling them to generate years of simulated data in a few hours. Yet, efficiently and accurately computing the simulation derivatives remains an open challenge, with potentially high gains on the convergence speed of reinforcement learning and trajectory optimization algorithms, especially for problems involving physical contact interactions. This paper contributes to this objective by introducing a unified and efficient algorithmic solution for computing the analytical derivatives of robotic simulators. The approach considers both the collision and frictional stages, accounting for their intrinsic nonsmoothness and also exploiting the sparsity induced by the underlying multibody systems. These derivatives have been implemented in C++, and the code will be open-sourced in the Simple simulator. They depict state-of-the-art timings ranging from 5 microseconds for a 7-dof manipulator up to 95 microseconds for 36-dof humanoid, outperforming alternative solutions by a factor of at least 100.

cs.RO↗

arXiv2024

Contact Models in Robotics: a Comparative Analysis

Physics simulation is ubiquitous in robotics. Whether in model-based approaches (e.g., trajectory optimization), or model-free algorithms (e.g., reinforcement learning), physics simulators are a central component of modern control pipelines in robotics. Over the past decades, several robotic simulators have been developed, each with dedicated contact modeling assumptions and algorithmic solutions. In this article, we survey the main contact models and the associated numerical methods commonly used in robotics for simulating advanced robot motions involving contact interactions. In particular, we recall the physical laws underlying contacts and friction (i.e., Signorini condition, Coulomb's law, and the maximum dissipation principle), and how they are transcribed in current simulators. For each physics engine, we expose their inherent physical relaxations along with their limitations due to the numerical techniques employed. Based on our study, we propose theoretically grounded quantitative criteria on which we build benchmarks assessing both the physical and computational aspects of simulation. We support our work with an open-source and efficient C++ implementation of the existing algorithmic variations. Our results demonstrate that some approximations or algorithms commonly used in robotics can severely widen the reality gap and impact target applications. We hope this work will help motivate the development of new contact models, contact solvers, and robotic simulators in general, at the root of recent progress in motion generation in robotics.

cs.RO↗

arXiv2024

From Compliant to Rigid Contact Simulation: a Unified and Efficient Approach

Whether rigid or compliant, contact interactions are inherent to robot motions, enabling them to move or manipulate things. Contact interactions result from complex physical phenomena, that can be mathematically cast as Nonlinear Complementarity Problems (NCPs) in the context of rigid or compliant point contact interactions. Such a class of complementarity problems is, in general, difficult to solve both from an optimization and numerical perspective. Over the past decades, dedicated and specialized contact solvers, implemented in modern robotics simulators (e.g., Bullet, Drake, MuJoCo, DART, Raisim) have emerged. Yet, most of these solvers tend either to solve a relaxed formulation of the original contact problems (at the price of physical inconsistencies) or to scale poorly with the problem dimension or its numerical conditioning (e.g., a robotic hand manipulating a paper sheet). In this paper, we introduce a unified and efficient approach to solving NCPs in the context of contact simulation. It relies on a sound combination of the Alternating Direction Method of Multipliers (ADMM) and proximal algorithms to account for both compliant and rigid contact interfaces in a unified way. To handle ill-conditioned problems and accelerate the convergence rate, we also propose an efficient update strategy to adapt the ADMM hyperparameters automatically. By leveraging proximal methods, we also propose new algorithmic solutions to efficiently evaluate the inverse dynamics involving rigid and compliant contact interactions, extending the approach developed in MuJoCo. We validate the efficiency and robustness of our contact solver against several alternative contact methods of the literature and benchmark them on various robotics and granular mechanics scenarios. Our code is made open-source at https://github.com/Simple-Robotics/Simple.

cs.RO↗

arXiv2024

Leveraging Randomized Smoothing for Optimal Control of Nonsmooth Dynamical Systems

Optimal control (OC) algorithms such as Differential Dynamic Programming (DDP) take advantage of the derivatives of the dynamics to efficiently control physical systems. Yet, in the presence of nonsmooth dynamical systems, such class of algorithms are likely to fail due, for instance, to the presence of discontinuities in the dynamics derivatives or because of non-informative gradient. On the contrary, reinforcement learning (RL) algorithms have shown better empirical results in scenarios exhibiting non-smooth effects (contacts, frictions, etc). Our approach leverages recent works on randomized smoothing (RS) to tackle non-smoothness issues commonly encountered in optimal control, and provides key insights on the interplay between RL and OC through the prism of RS methods. This naturally leads us to introduce the randomized Differential Dynamic Programming (R-DDP) algorithm accounting for deterministic but non-smooth dynamics in a very sample-efficient way. The experiments demonstrate that our method is able to solve classic robotic problems with dry friction and frictional contacts, where classical OC algorithms are likely to fail and RL algorithms require in practice a prohibitive number of samples to find an optimal solution.

cs.RO↗

arXiv2023

Enforcing the consensus between Trajectory Optimization and Policy Learning for precise robot control

Reinforcement learning (RL) and trajectory optimization (TO) present strong complementary advantages. On one hand, RL approaches are able to learn global control policies directly from data, but generally require large sample sizes to properly converge towards feasible policies. On the other hand, TO methods are able to exploit gradient-based information extracted from simulators to quickly converge towards a locally optimal control trajectory which is only valid within the vicinity of the solution. Over the past decade, several approaches have aimed to adequately combine the two classes of methods in order to obtain the best of both worlds. Following on from this line of research, we propose several improvements on top of these approaches to learn global control policies quicker, notably by leveraging sensitivity information stemming from TO methods via Sobolev learning, and augmented Lagrangian techniques to enforce the consensus between TO and policy learning. We evaluate the benefits of these improvements on various classical tasks in robotics through comparison with existing approaches in the literature.

cs.RO↗

arXiv2022

Differentiable Collision Detection: a Randomized Smoothing Approach

Collision detection appears as a canonical operation in a large range of robotics applications from robot control to simulation, including motion planning and estimation. While the seminal works on the topic date back to the 80s, it is only recently that the question of properly differentiating collision detection has emerged as a central issue, thanks notably to the ongoing and various efforts made by the scientific community around the topic of differentiable physics. Yet, very few solutions have been suggested so far, and only with a strong assumption on the nature of the shapes involved. In this work, we introduce a generic and efficient approach to compute the derivatives of collision detection for any pair of convex shapes, by notably leveraging randomized smoothing techniques which have shown to be particularly adapted to capture the derivatives of non-smooth problems. This approach is implemented in the HPP-FCL and Pinocchio ecosystems, and evaluated on classic datasets and problems of the robotics literature, demonstrating few micro-second timings to compute informative derivatives directly exploitable by many real robotic applications including differentiable simulation.

cs.RO↗

arXiv2022

Augmenting differentiable physics with randomized smoothing

In the past few years, following the differentiable programming paradigm, there has been a growing interest in computing the gradient information of physical processes (e.g., physical simulation, image rendering). However, such processes may be non-differentiable or yield uninformative gradients (i.d., null almost everywhere). When faced with the former pitfalls, gradients estimated via analytical expression or numerical techniques such as automatic differentiation and finite differences, make classical optimization schemes converge towards poor quality solutions. Thus, relying only on the local information provided by these gradients is often not sufficient to solve advanced optimization problems involving such physical processes, notably when they are subject to non-smoothness and non-convexity issues.In this work, inspired by the field of zero-th order optimization, we leverage randomized smoothing to augment differentiable physics by estimating gradients in a neighborhood. Our experiments suggest that integrating this approach inside optimization algorithms may be fruitful for tasks as varied as mesh reconstruction from images or optimal control of robotic systems subject to contact and friction issues.

cs.RO↗

arXiv2022

Collision Detection Accelerated: An Optimization Perspective

Collision detection between two convex shapes is an essential feature of any physics engine or robot motion planner. It has often been tackled as a computational geometry problem, with the Gilbert, Johnson and Keerthi (GJK) algorithm being the most common approach today. In this work we leverage the fact that collision detection is fundamentally a convex optimization problem. In particular, we establish that the GJK algorithm is a specific sub-case of the well-established Frank-Wolfe (FW) algorithm in convex optimization. We introduce a new collision detection algorithm by adapting recent works linking Nesterov acceleration and Frank-Wolfe methods. We benchmark the proposed accelerated collision detection method on two datasets composed of strictly convex and non-strictly convex shapes. Our results show that our approach significantly reduces the number of iterations to solve collision detection problems compared to the state-of-the-art GJK algorithm, leading to up to two times faster computation times.

cs.RO↗

arXiv2021

Differentiable Rendering with Perturbed Optimizers

Reasoning about 3D scenes from their 2D image projections is one of the core problems in computer vision. Solutions to this inverse and ill-posed problem typically involve a search for models that best explain observed image data. Notably, images depend both on the properties of observed scenes and on the process of image formation. Hence, if optimization techniques should be used to explain images, it is crucial to design differentiable functions for the projection of 3D scenes into images, also known as differentiable rendering. Previous approaches to differentiable rendering typically replace non-differentiable operations by smooth approximations, impacting the subsequent 3D estimation. In this paper, we take a more general approach and study differentiable renderers through the prism of randomized optimization and the related notion of perturbed optimizers. In particular, our work highlights the link between some well-known differentiable renderer formulations and randomly smoothed optimizers, and introduces differentiable perturbed renderers. We also propose a variance reduction mechanism to alleviate the computational burden inherent to perturbed optimizers and introduce an adaptive scheme to automatically adjust the smoothing parameters of the rendering process. We apply our method to 3D scene reconstruction and demonstrate its advantages on the tasks of 6D pose estimation and 3D mesh reconstruction. By providing informative gradients that can be used as a strong supervisory signal, we demonstrate the benefits of perturbed renderers to obtain more accurate solutions when compared to the state-of-the-art alternatives using smooth gradient approximations.

cs.CV↗