arXiv subjects

Quentin M. Ramasse

Publications and source records attributed to Quentin M. Ramasse.

17 recordsLinked to original sources

arXiv2026

The molecular chemistry of nanoscale organic matter in asteroid Ryugu

The analysis of biorelevant molecules in returned mission samples such as from the carbonaceous asteroid (162173) Ryugu is key to unravelling the role of extraterrestrial organics in the evolution of life. Coordinated analyses using chemically non-destructive techniques at the finest length-scales on pristine samples are particularly important. Here, we identify the chemical signature of uncommon globular and nitrogen-containing diffuse composite organic matter in asteroid Ryugu and map the distribution of biorelevant molecules therein with unprecedented detail. Using a novel electron-microscopy-based combination of vibrational and core-level spectroscopy, we disentangle the chemistry and nanoscale petrography of these organics. We show that some of these organics contain soluble and highly aliphatic components as well as NHx functional groups, that have formed in outer solar nebula environments before parent body incorporation or were synthesized by subtle fluid reactions on the final Ryugu asteroid. These novel coordinated analyses will open up new avenues of research on these types of precious and rare asteroidal dust samples.

astro-ph.EP↗

arXiv2026

Probing Plasmonic Oscillations in 2D Moiré Nanocrystal Superlattices by Low-Loss EELS

Electron energy loss spectroscopy (EELS) has been established as a powerful analytical technique for investigating the oxidation state, band structure, and dielectric properties of materials with exceptional spatial resolution. Inspired by twisted 2D materials, we utilize low-loss EELS to examine the plasmonic excitations in 2D moiré Au nanocrystal superlattices (NCSLs) formed by liquid-air interface self-assembly using a double-dipping method. This approach produces stacked hexagonal layers that can be twisted, forming moiré patterns in NCSLs whose twist angles are precisely measured via scanning transmission electron microscopy (STEM). Low-loss EELS effectively mitigates challenges arising from fabrication-induced non-uniformity and reveals a blue shift in plasmonic excitation when comparing single-layer, double-layer, and twisted configurations. This sharply contrasts with the optical spectroscopy measurements, which show an overall red shift relative to the EELS data. The high spatial resolution of STEM-EELS further demonstrates that twist-induced symmetry breaking strongly influences plasmonic behavior. Coupled dipole modeling explains the observed discrepancies: the electron beam excites out-of-plane polarization modes unavailable to optical probes, while optical measurements average over ensembles. Our findings highlight that EELS provides complementary information to optical spectroscopy for understanding how structural arrangements at the nanoscale influence collective electronic properties, advancing the design of plasmonic metamaterials.

cond-mat.mtrl-sci↗

arXiv2025

Magnon spectroscopy in the electron microscope

The miniaturisation of transistors is approaching its limits due to challenges in heat management and information transfer speed. To overcome these obstacles, emerging technologies such as spintronics are being developed, which leverage the electron's spin in addition to its charge. Local phenomena at interfaces or structural defects will greatly influence the efficiency of spin-based devices, making the ability to study and control spin wave propagation at the nano- and atomic scales a key challenge. The development of high-spatial-resolution tools to probe spin waves, also called magnons, at relevant lengthscales is thus essential to understand how their properties are affected by such local features. Here, we show the first experimental detection of bulk magnons at the nanoscale using scanning transmission electron microscopy. By employing high-resolution electron energy loss spectroscopy with hybrid-pixel direct electron detectors optimized for low acceleration voltages, we successfully overcome the challenges posed by weak signals and identify magnon excitations in a thin NiO nanocrystal. Advanced inelastic electron scattering simulations corroborate our findings. These results open new avenues for detecting magnons, exploring their dispersions and their modifications arising from nanoscale structural or chemical defects. This marks an important milestone in magnonics and presents exciting opportunities for the future development of spintronic devices.

cond-mat.mtrl-sci↗

arXiv2025

Fabrication and characterization of boron-terminated tetravacancies in monolayer hBN using STEM, EELS and electron ptychography

Tetravacancies in monolayer hexagonal boron nitride (hBN) with consistent edge termination (boron or nitrogen) form triangular nanopores with electrostatic potentials that can be leveraged for applications such as selective ion transport and neuromorphic computing. In order to quantitatively predict the properties of these structures, an atomic-level understanding of their local electronic and chemical environments is required. Moreover, robust methods for their precision manufacture are needed. Here were use electron irradiation in a scanning transmission electron microscope (STEM) at high dose rate to drive the formation of boron-terminated tetravacancies in monolayer hBN. Characterization of the defects is achieved using aberration-corrected STEM, monochromated electron energy-loss spectroscopy (EELS), and electron ptychography. Z-contrast in STEM and chemical fingerprinting by core-loss EELS enable identification of the edge terminations, while electron ptychography gives insight into structural relaxation of the tetravacancies and provides evidence of enhanced electron density around the defect perimeters indicative of bonding effects.

cond-mat.mtrl-sci↗

arXiv2024

Theory of momentum-resolved magnon electron energy loss spectra: The case of Yttrium Iron Garnet

We explore the inelastic spectra of electrons impinging in a magnetic system. The methodology here presented is intended to highlight the charge-dependent interaction of the electron beam in a STEM-EELS experiment, and the local vector potential generated by the magnetic lattice. This interaction shows an intensity $10^{-2}$ smaller than the purely spin interaction, which is taken to be functionally the same as in the inelastic neutron experiment. On the other hand, it shows a strong scattering vector dependence ($κ^{-4}$) and a dependence with the relative orientation between the probe wavevector and the local magnetic moments of the solid. We present YIG as a case study due to its high interest by the community.

cond-mat.mtrl-sci↗

arXiv2023

Confined magnon dispersion in ferromagnetic and antiferromagnetic thin films in a second quantization approach: the case of Fe and NiO

We present a methodology based on the calculation of the inelastic scattering from magnons via the spin scattering function in confined geometries such as thin films using a second quantization formalism, for both ferromagnetic and antiferromagnetic materials. The case studies are chosen with an aim to demonstrate the effects of film thickness and crystal orientation on magnon modes, using bcc Fe(100) and NiO with (100) and (111) crystallographic orientations as prototypical systems. Due to the quantization of the quasi-momentum we observe a granularity in the inelastic spectra in the reciprocal space path reflecting the orientation of the thin film. This approach also allows to capture softer modes that appear due to the partial interaction of magnetic moments close to the surface in a thin film geometry, in addition to bulk modes. The softer modes are also affected by crystallographic orientations as illustrated by the different surface-related peaks of NiO magnon density of states at approximately ~ 65 meV for (100) and ~ 42 meV for (111). Additionally, we explore the role of anisotropy on magnon modes, revealing that introducing anisotropy to both Fe and NiO films increases the overall hardness of the magnon modes. The introduction of a surface anisotropy produces a shift of the surface-related magnon DOS peak to higher energies with increased surface anisotropy, and in some cases leading to surface confined mode.

cond-mat.mtrl-sci↗

arXiv2023

Unveiling the impact of temperature on magnon diffuse scattering detection in the transmission electron microscope

Magnon diffuse scattering (MDS) signals could be studied with high spatial resolution in scanning transmission electron microscopy (STEM), thanks to recent technological progress in electron energy loss spectroscopy. However, detecting MDS signals in STEM is challenging due to their overlap with stronger thermal diffuse scattering (TDS) signals. In bcc Fe at 300 K, MDS signals greater than or comparable to TDS signals occur under the central Bragg disk, into a currently inaccesible energy-loss region. Therefore, to detect MDS in STEM, it is necessary to find conditions in which TDS and MDS signals can be separated. Temperature may be a key factor due to the distinct thermal signatures of magnon and phonon signals. In this work, we present a study on the effects of temperature on MDS and TDS in bcc Fe -- considering a detector outside the central Bragg disk and a fixed convergent electron probe -- using the frozen phonon and frozen magnon multislice methods. Our study reveals that neglecting the effects of atomic vibrations causes the MDS signal to grow approximately linearly up to the Curie temperature of Fe, after which it exhibits less variation. The MDS signal displays an alternating behavior due to dynamical diffraction, instead of increasing monotonically as a function of thickness. Including the effects of atomic vibrations through a complex atomic electrostatic potential causes the linear growth of the MDS signal to change to a non-linear behavior that exhibits a predominant peak for a sample of thickness 16.072 nm at 1100 K. In contrast, the TDS signal grows more linearly than the MDS signal but still exhibits appreciable dynamical diffraction effects. An analysis of the signal-to-noise ratio (SNR) shows that the MDS signal can be a statistically significant contribution to the total scattering intensity under realizable measurement conditions and acquisition times.

cond-mat.mtrl-sci↗

arXiv2023

Observation of Antiferroelectric Domain Walls in a Uniaxial Hyperferroelectric

Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies showed that the configuration of ferroelectric walls can go well beyond the conventional Ising-type structure. Néel-, Bloch-, and vortex-like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, we report the discovery of antiferroelectric domain walls in the uniaxial ferroelectric Pb$_{5}$Ge$_{3}$O$_{11}$. We resolve highly mobile domain walls with an alternating displacement of Pb atoms, resulting in a cyclic 180$^{\circ}$ flip of dipole direction within the wall. Density functional theory calculations reveal that Pb$_{5}$Ge$_{3}$O$_{11}$ is hyperferroelectric, allowing the system to overcome the depolarization fields that usually suppress antiparallel ordering of dipoles along the longitudinal direction. Interestingly, the antiferroelectric walls observed under the electron beam are energetically more costly than basic head-to-head or tail-to-tail walls. The results suggest a new type of excited domain-wall state, expanding previous studies on ferroelectric domain walls into the realm of antiferroic phenomena.

cond-mat.mtrl-sci↗

arXiv2021

Magnon diffuse scattering in scanning transmission electron microscopy

We present a theory and a simulation of thermal diffuse scattering due to the excitation of magnons in scanning transmission electron microscopy. The calculations indicate that magnons can present atomic contrast when detected by electron energy-loss spectroscopy using atomic-size electron beams. The results presented here indicate that the intensity of the magnon diffuse scattering in bcc iron at 300~K is 4 orders of magnitude weaker than the intensity of thermal diffuse scattering arising from atomic vibrations. In an energy range where the phonon and magnon dispersions do not overlap, a monochromated scanning transmission electron microscope equipped with direct electron detectors for spectroscopy is expected to resolve the magnon spectral signatures.

cond-mat.mtrl-sci↗

arXiv2021

Electronic band structure of narrow-bandgap p-n nanojunctions in heterostructured nanowires measured by electron energy loss spectroscopy

The electronic band structure of complex nanostructured semiconductors has a considerable effect on the final electronic and optical properties of the material and, ultimately, on the functionality of the devices incorporating them. Valence electron energy-loss spectroscopy (VEELS) in the transmission electron microscope (TEM) provides the possibility of measuring this property of semiconductors with high spatial resolution. However, it still represents a challenge for narrow-bandgap semiconductors, since an electron beam with low energy spread is required. Here we demonstrate that by means of monochromated VEELS we can study the electronic band structure of narrow-gap materials GaSb and InAs in the form of heterostructured nanowires, with bandgap values down to 0.5 eV, especially important for newly developed structures with unknown bandgaps. Using complex heterostructured InAs-GaSb nanowires, we determine a bandgap value of 0.54 eV for wurtzite InAs. Moreover, we directly compare the bandgaps of wurtzite and zinc-blende polytypes of GaSb in a single nanostructure, measured here as 0.84 and 0.75 eV, respectively. This allows us to solve an existing controversy in the band alignment between these structures arising from theoretical predictions. The findings demonstrate the potential of monochromated VEELS to provide a better understanding of the band alignment at the heterointerfaces of narrow-bandgap complex nanostructured materials with high spatial resolution. This is especially important for semiconductor device applications where even the slightest variations of the electronic band structure at the nanoscale can play a crucial role in their functionality.

cond-mat.mtrl-sci↗

arXiv2020

Heterotwin Zn3P2 superlattice nanowires: the role of indium insertion in the superlattice formation mechanism and their optical properties

Zinc phosphide, Zn3P2, nanowires constitute prospective building blocks for next generation solar cells due to the combination of suitable optoelectronic properties and an abundance of the constituting elements in the Earths crust. The generation of periodic superstructures along the nanowire axis could provide an additional mechanism to tune their functional properties. Here we present the vapour-liquid-solid growth of zinc phosphide superlattices driven by periodic heterotwins. This uncommon planar defect involves the exchange of Zn by In at the twinning boundary. We find that the zigzag superlattice formation is driven by reduction of the total surface energy of the liquid droplet. The chemical variation across the heterotwin does not affect the homogeneity of the optical proerties, as measured by cathodoluminescence. The basic understanding provided here brings new perspectives on the use of II-V semiconductors in nanowire technology.

cond-mat.mtrl-sci↗

arXiv2017

Towards atomically precise manipulation of 2D nanostructures in the electron microscope

Despite decades of research, the ultimate goal of nanotechnology--top-down manipulation of individual atoms--has been directly achieved with only one technique: scanning probe microscopy. In this Review, we demonstrate that scanning transmission electron microscopy (STEM) is emerging as an alternative method for the direct assembly of nanostructures, with possible applications in plasmonics, quantum technologies, and materials science. Atomically precise manipulation with STEM relies on recent advances in instrumentation that have enabled non-destructive atomic-resolution imaging at lower electron energies. While momentum transfer from highly energetic electrons often leads to atom ejection, interesting dynamics can be induced when the transferable kinetic energies are comparable to bond strengths in the material. Operating in this regime, very recent experiments have revealed the potential for single-atom manipulation using the Angstrom-sized electron beam. To truly enable control, however, it is vital to understand the relevant atomic-scale phenomena through accurate dynamical simulations. Although excellent agreement between experiment and theory for the specific case of atomic displacements from graphene has been recently achieved using density functional theory molecular dynamics, in many other cases quantitative accuracy remains a challenge. We provide a comprehensive reanalysis of available experimental data on beam-driven dynamics in light of the state-of-the-art in simulations, and identify important targets for improvement. Overall, the modern electron microscope has great potential to become an atom-scale fabrication platform, especially for covalently bonded 2D nanostructures. We review the developments that have made this possible, argue that graphene is an ideal starting material, and assess the main challenges moving forward.

cond-mat.mtrl-sci↗

arXiv2017

Single-Atom Scale Structural Selectivity in Te Nanowires Encapsulated inside Ultra-Narrow, Single-Walled Carbon Nanotubes

Extreme nanowires (ENs) represent the ultimate class of crystals: They are the smallest possible periodic materials. With atom-wide motifs repeated in one dimension (1D), they offer a privileged perspective into the Physics and Chemistry of low-dimensional systems. Single-walled carbon nanotubes (SWCNTs) provide ideal environments for the creation of such materials. Here we present a comprehensive study of Te ENs encapsulated inside ultra- narrow SWCNTs with diameters between 0.7 nm and 1.1 nm. We combine state-of-the-art imaging techniques and 1D-adapted ab initio structure prediction to treat both confinement and periodicity effects. The studied Te ENs adopt a variety of structures, exhibiting a true 1D realisation of a Peierls structural distortion and transition from metallic to insulating behaviour as a function of encapsulating diameter. We analyse the mechanical stability of the encapsulated ENs and show that nanoconfinement is not only a useful means to produce ENs, but may actually be necessary, in some cases, to prevent them from disintegrating. The ability to control functional properties of these ENs with confinement has numerous applications in future device technologies, and we anticipate that our study will set the basic paradigm to be adopted in the characterisation and understanding of such systems.

cond-mat.mtrl-sci↗

arXiv2016

Interface-induced Polarization in SrTiO$_3$-LaCrO$_3$ Superlattices

Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is induced throughout the STO layers of the superlattice. Using x-ray absorption near-edge spectroscopy and aberration-corrected scanning transmission electron microscopy displacements of the Ti cations off-center within TiO6 octahedra along the superlattice growth direction are measured. This distortion gives rise to built-in potential gradients within the STO and LCO layers, as measured by in situ x-ray photoelectron spectroscopy. Density functional theory models explain the mechanisms underlying this behavior, revealing the existence of both an intrinsic polar distortion and a built-in electric field, which are due to alternately positively and negatively charged interfaces in the superlattice. This study paves the way for controllable polarization for carrier separation in multilayer materials and highlights the crucial role that interface structure plays in governing such behavior.

cond-mat.mtrl-sci↗

arXiv2015

Liquid exfoliation of solvent-stabilised black phosphorus: applications beyond electronics

Few layer black phosphorus is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of stability severely limits our ability to synthesise and process this material. Here we demonstrate that high-quality, few-layer black phosphorus nanosheets can be produced in large quantities by liquid phase exfoliation in the solvent N-cyclohexyl-2-pyrrolidone (CHP). We can control nanosheet dimensions and have developed metrics to estimate both nanosheet size and thickness spectroscopically. When exfoliated in CHP, the nanosheets are remarkably stable unless water is intentionally introduced. Computational studies show the degradation to occur by reaction with water molecules only at the nanosheet edge, leading to the removal of phosphorus atoms and the formation of phosphine and phosphorous acid. We demonstrate that liquid exfoliated black phosphorus nanosheets are potentially useful in a range of applications from optical switches to gas sensors to fillers for composite reinforcement.

cond-mat.mes-hall↗

arXiv2012

Graphene re-knits its holes

Nano-holes, etched under an electron beam at room temperature in singlelayer graphene sheets as a result of their interaction with metalimpurities, are shown to heal spontaneously by filling up with either non-hexagon, graphene-like, or perfect hexagon 2D structures. Scanning transmission electron microscopy was employed to capture the healing process and study atom-by-atom the re-grown structure. A combination of these nano-scale etching and re-knitting processes could lead to new graphene tailoring approaches.

cond-mat.mes-hall↗

arXiv2012

Direct Experimental Evidence of Metal-Mediated Etching of Suspended Graphene

Atomic resolution high angle annular dark field imaging of suspended, single-layer graphene, onto which the metals Cr, Ti, Pd, Ni, Al and Au atoms had been deposited was carried out in an aberration corrected scanning transmission electron microscope. In combination with electron energy loss spectroscopy, employed to identify individual impurity atoms, it was shown that nano-scale holes were etched into graphene, initiated at sites where single atoms of all the metal species except for gold come into close contact with the graphene. The e-beam scanning process is instrumental in promoting metal atoms from clusters formed during the original metal deposition process onto the clean graphene surface, where they initiate the hole-forming process. Our observations are discussed in the light of calculations in the literature, predicting a much lowered vacancy formation in graphene when metal ad-atoms are present. The requirement and importance of oxygen atoms in this process, although not predicted by such previous calculations, is also discussed, following our observations of hole formation in pristine graphene in the presence of Si-impurity atoms, supported by new calculations which predict a dramatic decrease of the vacancy formation energy, when SiOx molecules are present.

cond-mat.mes-hall↗