arXiv subjects

Quoc Vo

Publications and source records attributed to Quoc Vo.

6 recordsLinked to original sources

arXiv2023

Droplet jumping by modulated electrowetting

We investigate jumping of sessile droplets from a solid surface in ambient oil using modulated electrowetting actuation. We focus on the case in which the electrowetting effect is activated to cause droplet spreading and then deactivated exactly at the moment the droplet reaches its maximum deformation. By systematically varying the control parameters such as the droplet radius, liquid viscosity, and applied voltage, we provide detailed characterisation of the resulting behaviours including a comprehensive phase diagram separating detachment from non-detachment behaviours, as well as how the detach velocity and detach time, i.e, duration leading to detachment, depend on the control parameters. We then construct a theoretical model predicting the detachment condition using energy conservation principles. We finally validate our theoretical analysis by experimental data obtained in the explored ranges of the control parameters.

physics.flu-dyn↗

arXiv2022

Unsteady wetting of soft solids

From hydrogels and plastics to liquid crystals, soft solids cover a wide array of synthetic and biological materials that play key enabling roles in advanced technologies such as 3D printing, soft robotics, wearable electronics, self-assembly, and bioartificial tissues. Their elasticity and stimuli-induced changes in mechanical, optical, or electrical properties offer a unique advantage in designing and creating new dynamically functional components for sensing, micro-actuation, colour changes, information, and mass transport. To harness the vast potential of soft solids, a thorough understanding of their reactions when exposed to liquids is needed. Attempts to study the interactions between soft solids and liquids have largely focused on the wetting of soft solids and its resulting deformation at equilibrium or in a quasi-static state. Here, we consider the frequently encountered case of unsteady wetting of a liquid on a soft solid and show that transient deformation of the solid is necessary to understand unsteady wetting behaviours. We find that the initial spreading of the liquid occurs uninterrupted in the absence of solid deformation. This is followed by intermittent spreading, in which transient deformation of the solid at the three-phase contact line (CL) causes the CL motion to alternate alternation between CL sticking and slipping. We identify the spreading rate of liquids and the viscoelastic reacting rate of soft solids as the two competing factors in dictating intermittent spreading. We formulate and validate experimentally the conditions required for the contact line to transition from sticking to slipping. By considering the growing deformation of soft solids as dynamic surface heterogeneities, our proposed conditions for stick-slip transition in unsteady wetting on soft solids broaden the classical theory on wetting hysteresis on rigid solids.

cond-mat.soft↗

arXiv2022

Viscous droplet impingement on soft substrates

Viscous droplets impinging on soft substrates may exhibit several distinct behaviours including repeated bouncing, wetting, and hovering, i.e., spreading and retracting after impact without bouncing back or wetting. We experimentally study the conditions enabling these characteristic behaviours by systematically varying the substrate elasticity, impact velocity and the liquid viscosity. For each substrate elasticity, the transition to wetting is determined as the dependence of the Weber number We, which measures the droplet's kinetic energy against its surface energy, on the Ohnesorge number Oh, which compares viscosity to inertia and capillarity. We find that while We at the wetting transition monotonically decreases with Oh for relatively rigid substrates, it exhibits a counter-intuitive behaviour in which it first increases then gradually decreases for softer substrates. We experimentally determine the dependence of the maximum Weber number allowing non-wetting impacts on the substrate elasticity and show that it provides an excellent quantitative measure of liquid repellency for a wide range of surfaces, from liquid to soft surfaces and non-deformable surfaces.

cond-mat.soft↗

arXiv2021

Bouncing-to-wetting transition for impact of water droplets on soft solids

Soft surfaces impacted by liquid droplets trap more air underneath than their rigid counterpart. The extended lifetime of the air film not only facilitates bouncing behaviours of the impacting droplets but also increases the possibility of an interaction between the air film itself and the air cavity formed inside the droplets by capillary waves. Such interaction may cause rupture of the trapped air film by a so-called dimple inversion phenomenon and suppress bouncing. In this work, we systematically investigate the relation between air cavity collapse and air film rupture for water droplets impacting on soft, hydrophobic surfaces. By constructing a bouncing-to-wetting phase diagram based on the rupturing dynamics of the trapped air film, we observe that the regime in which air film rupture is induced by dimple inversion consistently separates the bouncing regime and the one in which wetting is caused by random rupture. We also find that air film rupture by dimple inversion, in-turn, affects both the collapsing dynamics of the air cavity and the resulting high-speed jet. We then provide a detailed characterisation of the collapsing dynamics of the air cavity and subsequent jetting.

physics.flu-dyn↗

arXiv2021

Droplet ejection by electrowetting actuation

Fast contact-line motion of a droplet spreading on a solid substrate under the electrowetting effect generates strong capillary waves on the droplet's surface. The capillary waves may be strong enough to induce ejection of a satellite droplet from the primary one. In this study, we show that the size of the satellite droplet and the ejection time are not only dependent on the contact-line velocity, which directly relates to the applied voltage enabling the electrowetting effect, but also affected by the ejection dynamics. We derive a theoretical model of the criteria for droplet ejection and experimentally verify the proposed criteria for wide ranges of viscosity, droplet size and the applied voltage.

physics.flu-dyn↗

arXiv2021

Dynamics of droplets under electrowetting effect with voltages exceeding the contact angle saturation threshold

Electrowetting-on-dielectric (EWOD) is a powerful tool in many droplet-manipulation applications with a notorious weakness caused by contact-angle saturation (CAS), a phenomenon limiting the equilibrium contact angle of an EWOD-actuated droplet at high applied voltage. In this paper, we study the spreading behaviours of droplets on EWOD substrates with the range of applied voltage exceeding the saturation limit. We experimentally find that at the initial stage of spreading, the driving force at the contact line still follows the Young-Lippmann law even if the applied voltage is higher than the CAS voltage. We then theoretically establish the relation between the initial contact-line velocity and the applied voltage using the force balance at the contact line. We also find that the amplitude of capillary waves on the droplet surface generated by the contact-line's initial motion increases with the applied voltage. We provide a working framework utilising EWOD with voltages beyond CAS by characterising the capillary waves formed on the droplet surface and their self-similar behaviours. We finally propose a theoretical model of the wave profiles taking into account the viscous effects and verify this model experimentally. Our results provide avenues to utilise the EWOD effect with voltages beyond CAS threshold and have strong bearing on emerging applications such as digital microfluidic and ink-jet printing.

physics.flu-dyn↗