arXiv subjects

Réouven Assouly

Publications and source records attributed to Réouven Assouly.

14 recordsLinked to original sources

arXiv2026

Bosonic Error Correction with Fluxonium

Bosonic quantum error correction (QEC) offers a hardware-efficient route to fault-tolerant quantum computing. To date, however, superconducting circuit implementations of bosonic codes have utilized centimeter-scale 3D microwave cavities controlled by fixed-frequency transmon qubits, with logical lifetimes limited by transmon bit-flip errors. Here, we realize bosonic QEC in a fully planar architecture by pairing a heavy fluxonium, whose $451 \pm 70~μ\mathrm{s}$ bit-flip lifetime exceeds that of any control qubit in previous demonstrations, with an on-chip Archimedean spiral resonator several orders of magnitude smaller in mode volume than prior 3D cavities. We prepare finite-energy Gottesman-Kitaev-Preskill (GKP) states and stabilize them using measurement-free error correction with rapid fluxonium reset, extending the logical lifetime by a factor of $1.59 \pm 0.05$. These results provide the first demonstration of resonator control using a weakly coupled fluxonium and, with it, the first realization of standalone bosonic QEC in a fully planar superconducting circuit architecture.

quant-ph↗

arXiv2026

An All-van-der-Waals Qubit

Advances in solid-state physics, materials science, and device engineering have accelerated the development of superconducting qubits. Among emerging platforms, van der Waals (vdW) materials and their heterostructures are potentially attractive building blocks for quantum devices, yet their realization in qubit architectures remains largely underexplored. Here we report an all-vdW superconducting qubit based on a NbSe$_2$-hBN-NbSe$_2$ junction, in which a thin hBN layer simultaneously provides Josephson coupling and capacitive shunting between two NbSe$_2$ islands, forming a "merged-element" transmon. Temporal characterization using circuit quantum electrodynamics (cQED) techniques yields an average energy-relaxation time $T_{1,\mathrm{avg}} = 55 ~μs$, Hahn-echo coherence time $T_{2\mathrm{E},\mathrm{avg}} = 21 ~μs$, and Ramsey coherence time $T_{2\mathrm{R},\mathrm{avg}} = 1.9~μs$. The relatively low Ramsey time is primarily attributable to an enhanced sensitivity to charge noise consistent with the realized device parameters and not a fundamental limitation. These results show that lumped-element superconducting qubits based on vdW heterostructures can achieve coherence times comparable to those of conventional Al-AlO$_\mathrm{x}$-Al qubits, while offering a reduced device footprint and suppressed stray capacitive coupling.

quant-ph↗

arXiv2026

Enhanced Sensitivity near a Quantum Exceptional Point in the Absence of Engineered Dissipation

Non-Hermitian systems exhibit phenomena absent from Hermitian systems, including exceptional points (EPs), at which two or more eigenvectors coalesce. Conventional implementations rely on gain and loss, which strongly limit quantum coherence. Here, following a proposal by Wang and Clerk (PRA 2019), we realize a closed four-mode quantum system that emulates the dynamics of a PT dimer - two coupled resonators with balanced gain and loss - without engineered dissipation. The four modes are implemented as harmonics of a superconducting coplanar-waveguide resonator, with parametric couplings engineered using a current-pumped SNAIL. We use this device as a sensor for small variations in the PT dimer coupling strength. From signal-to-noise-ratio measurements, we observe enhanced sensitivity near the EP in a non-quantum-limited regime.

quant-ph↗

arXiv2026

Absence of Charge Offset Drift in a Transmon Qubit

Superconducting quantum circuits are sensitive to their electrostatic environment: uncontrolled charges accumulating on the electrodes of a Josephson junction shift the energy levels of a qubit, perturbing its operation and restricting their design. This effect is captured by a single parameter - the charge offset - whose slow, unpredictable drift has proven difficult to eliminate in practice. Here, we report a tantalum-based transmon qubit in which the charge offset remains pinned at zero over nearly three months of measurements, including two thermal cycles, with no observable compromise to the qubit lifetime. This exceptional stability disappears in later cooldowns, indicating a fragile mechanism at play. We attribute it to the inductance of a thin superconducting layer inadvertently formed in parallel with the Josephson junction during fabrication. X-ray surface spectroscopy suggests this layer arises from an incomplete wet-etch of tantalum on sapphire. Deliberately engineering such a layer offers a route to eliminating charge-offset drift in superconducting circuits more broadly.

quant-ph↗

arXiv2026

Amplifying microwave pulses with a single qubit engine fueled by quantum measurements

Recent progress in manipulating individual quantum systems enables the exploration of engines exploiting non-classical resources. One of the most appealing is the energy provided by the inherent backaction of quantum measurements. While a handful of experiments have investigated the inner dynamics of engines fueled by measurement backaction, powering a task by such an engine is missing. Here we demonstrate the amplification of microwave signals by an engine fueled by repeated quantum measurements of a superconducting transmon qubit. Using feedback, the engine acts as a quantum Maxwell demon operating without a hot thermal source. Measuring the gain of this amplification constitutes a direct probing of the work output of the engine, in contrast with inferring the work by measuring the qubit state along its evolution. Observing a good agreement between both work estimation methods, our experiment validates the accuracy of the indirect method. We characterize the long-term stability of the engine as well as its robustness to transmon decoherence, loss and drifts. Our experiment exemplifies the use of energy brought by quantum measurement backaction.

quant-ph↗

arXiv2026

Kinetic Inductance of Few-Layer NbSe$_2$ in the Two-Dimensional Limit

Van der Waals (vdW) superconductors remain superconducting down to the monolayer limit, enabling the exploration of emergent physical phenomena and functionality driven by reduced dimensionality. Here, we report the characterization of the kinetic inductance of atomically thin NbSe$_2$, a two-dimensional van der Waals superconductor, using superconducting coplanar waveguides and microwave measurement techniques familiar to circuit quantum electrodynamics (cQED). The kinetic inductance scales inversely with the number of NbSe$_2$ layers, reaching 1.2 nH/$\Box$ in the monolayer limit. Furthermore, the measured kinetic inductance exhibits a thickness-dependent crossover from clean- to dirty-limit behavior, with enhanced dirty-limit contributions emerging in the ultra-thin regime. These effects are likely driven by increased surface scattering, multi-band superconductivity, and geometric confinement. Additionally, the self-Kerr nonlinearity of the NbSe$_2$ films ranges from $K/2π$ = -0.008 to -14.7 Hz/photon, indicating its strong potential in applications requiring compact, nearly linear, high-inductance superconducting quantum devices and detectors. The fabrication and characterization techniques demonstrated here are extensible to the investigation of other two-dimensional superconductors.

cond-mat.supr-con↗

arXiv2025

Frequency- and Amplitude-Modulated Gates for Universal Quantum Control

Achieving high-fidelity single- and two-qubit gates is essential for executing arbitrary digital quantum algorithms and for building error-corrected quantum computers. We propose a theoretical framework for implementing quantum gates using frequency- and amplitude-modulated microwave control, which extends conventional amplitude modulation by introducing frequency modulation as an additional degree of control. Our approach operates on fixed-frequency qubits, converting the need for qubit frequency tunability into drive frequency modulation. Using Floquet theory, we analyze and design these drives for optimal fidelity within specified criteria. Our framework spans adiabatic to nonadiabatic gates within the Floquet framework, ensuring broad applicability across gate types and control schemes. Using typical transmon qubit parameters in numerical simulations, we demonstrate a universal gate set-including the X, Hadamard, phase, and CZ gates-with control error well below 0.1% and gate times of 25-40 ns for single-qubit operations and 125-135 ns for two-qubit operations. Furthermore, we show an always-on CZ gate tailored for driven qubits, which has gate times of 80-90 ns.

quant-ph↗

arXiv2025

Efficient Qubit Calibration by Binary-Search Hamiltonian Tracking

We present and experimentally implement a real-time protocol for calibrating the frequency of a resonantly driven qubit, achieving exponential scaling in calibration precision with the number of measurements, up to the limit imposed by decoherence. The real-time processing capabilities of a classical controller dynamically generate adaptive probing sequences for qubit-frequency estimation. Each probing evolution time and drive frequency are calculated to divide the prior probability distribution into two branches, following a locally optimal strategy that mimics a conventional binary search. The scheme does not require repeated measurements at the same setting, as it accounts for state preparation and measurement errors. Its use of a parametrized probability distribution favors numerical accuracy and computational speed. We show the efficacy of the algorithm by stabilizing a flux-tunable transmon qubit, leading to improved coherence and gate fidelity. As benchmarked by gate-set tomography, the field-programmable gate array (FPGA) powered control electronics partially mitigates non-Markovian noise, which is detrimental to quantum error correction. The mitigation is achieved by dynamically updating and feeding forward the qubit frequency. Our protocol highlights the importance of feedback in improving the calibration and stability of qubits subject to drift and can be readily applied to other qubit platforms.

quant-ph↗

arXiv2025

Temperature and Magnetic-Field Dependence of Energy Relaxation in a Fluxonium Qubit

Noise from material defects at device interfaces is known to limit the coherence of superconducting circuits, yet our understanding of the defect origins and noise mechanisms remains incomplete. Here we investigate the temperature and in-plane magnetic-field dependence of energy relaxation in a low-frequency fluxonium qubit, where the sensitivity to flux noise and charge noise arising from dielectric loss can be tuned by applied flux. We observe an approximately linear scaling of flux noise with temperature $T$ and a power-law dependence of dielectric loss $T^3$ up to 100 mK. Additionally, we find that the dielectric-loss-limited $T_1$ decreases with weak in-plane magnetic fields, suggesting a potential magnetic-field response of the underlying charge-coupled defects. We implement a multi-level decoherence model in our analysis, motivated by the widely tunable matrix elements and transition energies approaching the thermal energy scale in our system. These findings offer insight for fluxonium coherence modeling and should inform microscopic theories of intrinsic noise in superconducting circuits.

quant-ph↗

arXiv2025

Monitoring the energy of a cavity by observing the emission of a repeatedly excited qubit

The number of excitations in a large quantum system (harmonic oscillator or qudit) can be measured in a quantum nondemolition manner using a dispersively coupled qubit. It typically requires a series of qubit pulses that encode various binary questions about the photon number. Recently, a method based on the fluorescence measurement of a qubit driven by a train of identical pulses was introduced to track the photon number in a cavity, hence simplifying its monitoring and raising interesting questions about the measurement backaction of this scheme. A first realization with superconducting circuits demonstrated how the average number of photons could be measured in this way. Here we present an experiment that reaches single-shot photocounting and number tracking owing to a cavity decay rate 4 orders of magnitude smaller than both the dispersive coupling rate and the qubit emission rate. An innovative notch filter and pogo-pin-based galvanic contact makes possible these seemingly incompatible features. The qubit dynamics under the pulse train is characterized. We observe quantum jumps by monitoring the photon number via the qubit fluorescence as photons leave the cavity one at a time. Additionally, we extract the measurement rate and induced dephasing rate and compare them to theoretical models. Our method could be applied to quantum error correction protocols on bosonic codes or qudits.

quant-ph↗

arXiv2024

Qubit-State Purity Oscillations from Anisotropic Transverse Noise

We explore the dynamics of qubit-state purity in the presence of transverse noise that is anisotropically distributed in the Bloch-sphere XY plane. We perform Ramsey experiments with noise injected along a fixed laboratory-frame axis and observe oscillations in the purity at twice the qubit frequency arising from the intrinsic qubit Larmor precession. We probe the oscillation dependence on the noise anisotropy, orientation, and power spectral density, using a low-frequency fluxonium qubit. Our results elucidate the impact of transverse noise anisotropy on qubit decoherence and may be useful to disentangle charge and flux noise in superconducting quantum circuits.

quant-ph↗

arXiv2023

Demonstration of Quantum Advantage in Microwave Quantum Radar

While quantum entanglement can enhance the performance of several technologies such as computing, sensing and cryptography, its widespread use is hindered by its sensitivity to noise and losses. Interestingly, even when entanglement has been destroyed, some tasks still exhibit a quantum advantage $Q$, defined by a $Q$-time speedup, over any classical strategies. A prominent example is the quantum radar, which enhances the detection of the presence of a target in noisy surroundings. To beat all classical strategies, Lloyd proposed to use a probe initially entangled with an idler that can be recombined and measured with the reflected probe. Observing any quantum advantage requires exploiting the quantum correlations between the probe and the idler. It involves their joint measurement or at least adapting the idler detection to the outcome of the probe measurement. In addition to successful demonstrations of such quantum illumination protocols at optical frequencies, the proposal of a microwave radar, closer to conventional radars, gathered a lot of interest. However, previous microwave implementations have not demonstrated any quantum advantage as probe and idler were always measured independently. In this work, we implement a joint measurement using a superconducting circuit and demonstrate a quantum advantage $Q>1$ for microwave radar. Storing the idler mitigates the detrimental impact of microwave loss on the quantum advantage, and the purity of the initial entangled state emerges as the next limit. While the experiment is a proof-of-principle performed inside a dilution refrigerator, it exhibits some of the inherent difficulties in implementing quantum radars such as the limited range of parameters where a quantum advantage can be observed or the requirement for very low probe and idler temperatures.

quant-ph↗

arXiv2022

Energetics of a Single Qubit Gate

Qubits are physical, a quantum gate thus not only acts on the information carried by the qubit but also on its energy. What is then the corresponding flow of energy between the qubit and the controller that implements the gate? Here we exploit a superconducting platform to answer this question in the case of a quantum gate realized by a resonant drive field. During the gate, the superconducting qubit becomes entangled with the microwave drive pulse so that there is a quantum superposition between energy flows. We measure the energy change in the drive field conditioned on the outcome of a projective qubit measurement. We demonstrate that the drive's energy change associated with the measurement backaction can exceed by far the energy that can be extracted by the qubit. This can be understood by considering the qubit as a weak measurement apparatus of the driving field.

quant-ph↗

arXiv2020

Number-resolved photocounter for propagating microwave mode

Detectors of propagating microwave photons have recently been realized using superconducting circuits. However a number-resolved photocounter is still missing. In this letter, we demonstrate a single-shot counter for propagating microwave photons that can resolve up to $3$ photons. It is based on a pumped Josephson Ring Modulator that can catch an arbitrary propagating mode by frequency conversion and store its quantum state in a stationary memory mode. A transmon qubit then counts the number of photons in the memory mode using a series of binary questions. Using measurement based feedback, the number of questions is minimal and scales logarithmically with the maximal number of photons. The detector features a detection efficiency of $0.96 \pm 0.04$, and a dark count probability of $0.030 \pm 0.002$ for an average dead time of $4.5~\mathrm{μs}$. To maximize its performance, the device is first used as an \emph{in situ} waveform detector from which an optimal pump is computed and applied. Depending on the number of incoming photons, the detector succeeds with a probability that ranges from $(54 \pm 2)\%$ to $99\%$.

quant-ph↗