arXiv subjects

R. A. Howard

Publications and source records attributed to R. A. Howard.

17 recordsLinked to original sources

arXiv2023

A WISPR of the Venus Surface: Analysis of the Venus Nightside Thermal Emission at Optical Wavelengths

Parker Solar Probe (PSP) conducted several flybys of Venus while using Venus' gravity for orbital adjustments to enable its daring passes of the Sun. During these flybys, PSP turned to image the nightside of Venus using the Wide-field Imager for Solar PRobe (WISPR) optical telescopes, which unexpectedly observed Venus' surface through its thick and cloudy atmosphere in a theorized, but until-then unobserved near-visible spectral window below 0.8 $μ$m. We use observations taken during PSP's fourth Venus gravity assist flyby to examine the origin of the Venus nightside flux and confirm the presence of this new atmospheric window through which to observe the surface geology of Venus. The WISPR images are well explained by emission from the hot Venus surface escaping through a new atmospheric window in the optical with an overlying emission component from the atmosphere at the limb that is consistent with O$_2$ nightglow. The surface thermal emission correlates strongly with surface elevation (via temperature) and emission angle. Tessera and plains units have distinct WISPR brightness values. Controlling for elevation, Ovda Regio tessera is brighter than Thetis Regio; likewise, the volcanic plains of Sogolon Planitia are brighter than the surrounding regional plains units. WISPR brightness at 0.8 $μ$m is predicted to be positively correlated to FeO content in minerals; thus, the brighter units may have a different starting composition, be less weathered, or have larger particle sizes.

astro-ph.EP↗

arXiv2023

Parker Solar Probe: Four Years of Discoveries at Solar Cycle Minimum

Launched on 12 Aug. 2018, NASA's Parker Solar Probe had completed 13 of its scheduled 24 orbits around the Sun by Nov. 2022. The mission's primary science goal is to determine the structure and dynamics of the Sun's coronal magnetic field, understand how the solar corona and wind are heated and accelerated, and determine what processes accelerate energetic particles. Parker Solar Probe returned a treasure trove of science data that far exceeded quality, significance, and quantity expectations, leading to a significant number of discoveries reported in nearly 700 peer-reviewed publications. The first four years of the 7-year primary mission duration have been mostly during solar minimum conditions with few major solar events. Starting with orbit 8 (i.e., 28 Apr. 2021), Parker flew through the magnetically dominated corona, i.e., sub-Alfvénic solar wind, which is one of the mission's primary objectives. In this paper, we present an overview of the scientific advances made mainly during the first four years of the Parker Solar Probe mission, which go well beyond the three science objectives that are: (1) Trace the flow of energy that heats and accelerates the solar corona and solar wind; (2) Determine the structure and dynamics of the plasma and magnetic fields at the sources of the solar wind; and (3) Explore mechanisms that accelerate and transport energetic particles.

astro-ph.SR↗

arXiv2020

The Solar Orbiter Science Activity Plan: translating solar and heliospheric physics questions into action

Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime.

astro-ph.SR↗

arXiv2020

Trajectory Determination for Coronal Ejecta Observed by WISPR/Parker Solar Probe

The {\it Wide-field Imager for Solar Probe} (WISPR) on {\it Parker Solar Probe} (PSP), observing in white light, has a fixed angular field of view, extending from 13.5$^{\circ}$ to 108$^{\circ}$ from the Sun and approximately 50$^{\circ}$ in the transverse directions. Because of the highly elliptical orbit of PSP, the physical extent of the imaged coronal region varies directly as the distance from the Sun, requiring new techniques for analysis of the motions of observed density features. Here, we present a technique for determining the 3D trajectory of CMEs and other coronal ejecta moving radially at a constant velocity by first tracking the motion in a sequence of images and then applying a curve-fitting procedure to determine the trajectory parameters (distance vs. time, velocity, longitude and latitude). To validate the technique, we have determined the trajectory of two CMEs observed by WISPR that were also observed by another white-light imager, either LASCO/C3 or STEREO-A/HI1. The second viewpoint was used to verify the trajectory results from this new technique and help determine its uncertainty.

astro-ph.SR↗

arXiv2020

The Solar Orbiter mission -- Science overview

Solar Orbiter, the first mission of ESA's Cosmic Vision 2015-2025 programme and a mission of international collaboration between ESA and NASA, will explore the Sun and heliosphere from close up and out of the ecliptic plane. It was launched on 10 February 2020 04:03 UTC from Cape Canaveral and aims to address key questions of solar and heliospheric physics pertaining to how the Sun creates and controls the Heliosphere, and why solar activity changes with time. To answer these, the mission carries six remote-sensing instruments to observe the Sun and the solar corona, and four in-situ instruments to measure the solar wind, energetic particles, and electromagnetic fields. In this paper, we describe the science objectives of the mission, and how these will be addressed by the joint observations of the instruments onboard. The paper first summarises the mission-level science objectives, followed by an overview of the spacecraft and payload. We report the observables and performance figures of each instrument, as well as the trajectory design. This is followed by a summary of the science operations concept. The paper concludes with a more detailed description of the science objectives. Solar Orbiter will combine in-situ measurements in the heliosphere with high-resolution remote-sensing observations of the Sun to address fundamental questions of solar and heliospheric physics. The performance of the Solar Orbiter payload meets the requirements derived from the mission's science objectives. Its science return will be augmented further by coordinated observations with other space missions and ground-based observatories.

astro-ph.SR↗

arXiv2019

Comparing extrapolations of the coronal magnetic field structure at 2.5 solar radii with multi-viewpoint coronagraphic observations

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

astro-ph.SR↗

arXiv2012

A Coronal Hole's Effects on CME Shock Morphology in the Inner Heliosphere

We use STEREO imagery to study the morphology of a shock driven by a fast coronal mass ejection (CME) launched from the Sun on 2011 March 7. The source region of the CME is located just to the east of a coronal hole. The CME ejecta is deflected away from the hole, in contrast with the shock, which readily expands into the fast outflow from the coronal hole. The result is a CME with ejecta not well centered within the shock surrounding it. The shock shape inferred from the imaging is compared with in situ data at 1 AU, where the shock is observed near Earth by the Wind spacecraft, and at STEREO-A. Shock normals computed from the in situ data are consistent with the shock morphology inferred from imaging.

astro-ph.SR↗

arXiv2010

Interplanetary shocks lacking type II radio bursts

We report on the radio-emission characteristics of 222 interplanetary (IP) shocks. A surprisingly large fraction of the IP shocks (~34%) is radio quiet (i.e., the shocks lacked type II radio bursts). The CMEs associated with the RQ shocks are generally slow (average speed ~535 km/s) and only ~40% of the CMEs were halos. The corresponding numbers for CMEs associated with radio loud (RL) shocks are 1237 km/s and 72%, respectively. The RQ shocks are also accompanied by lower peak soft X-ray flux. CMEs associated with RQ (RL) shocks are generally accelerating (decelerating). The kinematics of CMEs associated with the km type II bursts is similar to those of RQ shocks, except that the former are slightly more energetic. Comparison of the shock The RQ shocks seem to be mostly subcritical and quasi-perpendicular. The radio-quietness is predominant in the rise phase and decreases through the maximum and declining phases of solar cycle 23. The solar sources of the shock-driving CMEs follow the sunspot butterfly diagram, consistent with the higher-energy requirement for driving shocks.

astro-ph.SR↗

arXiv2009

Stereoscopic Polar Plume Reconstructions from Stereo/Secchi Images

We present stereoscopic reconstructions of the location and inclination of polar plumes of two data sets based on the two simultaneously recorded images taken by the EUVI telescopes in the SECCHI instrument package onboard the \emph{STEREO (Solar TErrestrial RElations Observatory)} spacecraft. The ten plumes investigated show a superradial expansion in the coronal hole in 3D which is consistent with the 2D results. Their deviations from the local meridian planes are rather small with an average of $6.47^{\circ}$. By comparing the reconstructed plumes with a dipole field with its axis along the solar rotation axis, it is found that plumes are inclined more horizontally than the dipole field. The lower the latitude is, the larger is the deviation from the dipole field. The relationship between plumes and bright points has been investigated and they are not always associated. For the first data set, based on the 3D height of plumes and the electron density derived from SUMER/\emph{SOHO} Si {\sc viii} line pair, we found that electron densities along the plumes decrease with height above the solar surface. The temperature obtained from the density scale height is 1.6 to 1.8 times larger than the temperature obtained from Mg {\sc ix} line ratios. We attribute this discrepancy to a deviation of the electron and the ion temperatures. Finally, we have found that the outflow speeds studied in the O {\sc vi} line in the plumes corrected by the angle between the line of sight and the plume orientation are quite small with a maximum of 10 $\mathrm{km s^{-1}}$. It is unlikely that plumes are a dominant contributor to the fast solar wind.

astro-ph.SR↗

arXiv2009

Stereoscopic Analysis of the 19 May 2007 Erupting Filament

A filament eruption, accompanied by a B9.5 flare, coronal dimming and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5 degrees, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 A stereoscopic data from about 12 hours before to about 2 hours after the eruption, allowing us to determine the 3D trajectory of the erupting filament. From the 3D reconstructions of the filament and the chromospheric ribbons in the early stage of the eruption, simultaneous heating of both the rising filamentary material and the chromosphere directly below is observed, consistent with an eruption resulting from magnetic reconnection below the filament. Comparisons of the filament during eruption in 304 A and Halpha show that when it becomes emissive in He II, it tends to disappear in Halpha, indicating that the disappearance probably results from heating or motion, not loss, of filamentary material.

astro-ph.SR↗

arXiv2008

Comprehensive Observations of a Solar Minimum CME with STEREO

We perform the first kinematic analysis of a CME observed by both imaging and in situ instruments on board STEREO, namely the SECCHI, PLASTIC, and IMPACT experiments. Launched on 2008 February 4, the CME is tracked continuously from initiation to 1 AU using the SECCHI imagers on both STEREO spacecraft, and is then detected by the PLASTIC and IMPACT particle and field detectors on board STEREO-B. The CME is also detected in situ by ACE and SOHO/CELIAS at Earth's L1 Lagrangian point. The CME hits STEREO-B, ACE, and SOHO on 2008 February 7, but misses STEREO-A entirely. This event provides a good example of just how different the same event can look when viewed from different perspectives. We also demonstrate many ways in which the comprehensive and continuous coverage of this CME by STEREO improves confidence in our assessment of its kinematic behavior, with potential ramifications for space weather forecasting. The observations provide several lines of evidence in favor of the observable part of the CME being narrow in angular extent, a determination crucial for deciding how best to convert observed CME elongation angles from Sun-center to actual Sun-center distances.

astro-ph↗

arXiv2008

First Stereoscopic Coronal Loop Reconstructions from Stereo Secchi Images

We present the first reconstruction of the three-dimensional shape of magnetic loops in an active region from two different vantage points based on simultaneously recorded images. The images were taken by the two EUVI telescopes of the SECCHI instrument onboard the recently launched STEREO spacecraft when the heliocentric separation of the two space probes was 12 degrees. We demostrate that these data allow to obtain a reliable three-dimensional reconstruction of sufficiently bright loops. The result is compared with field lines derived from a coronal magnetic field model extrapolated from a photospheric magnetogram recorded nearly simultaneously by SOHO/MDI. We attribute discrepancies between reconstructed loops and extrapolated field lines to the inadequacy of the linear force-free field model used for the extrapolation.

astro-ph↗

arXiv2007

Spatial Relationship between Solar Flares and Coronal Mass Ejections

We report on the spatial relationship between solar flares and coronal mass ejections (CMEs) observed during 1996-2005 inclusive. We identified 496 flare-CME pairs considering limb flares (distance from central meridian > 45 deg) with soft X-ray flare size > C3 level. The CMEs were detected by the Large Angle and Spectrometric Coronagraph (LASCO) on board the Solar and Heliospheric Observatory (SOHO). We investigated the flare positions with respect to the CME span for the events with X-class, M-class, and C-class flares separately. It is found that the most frequent flare site is at the center of the CME span for all the three classes, but that frequency is different for the different classes. Many X-class flares often lie at the center of the associated CME, while C-class flares widely spread to the outside of the CME span. The former is different from previous studies, which concluded that no preferred flare site exists. We compared our result with the previous studies and conclude that the long-term LASCO observation enabled us to obtain the detailed spatial relation between flares and CMEs. Our finding calls for a closer flare-CME relationship and supports eruption models typified by the CSHKP magnetic reconnection model.

astro-ph↗

arXiv2006

Different Power-law Indices in the Frequency Distributions of Flares with and without Coronal Mass Ejections

We investigated the frequency distributions of flares with and without coronal mass ejections (CMEs) as a function of flare parameters (peak flux, fluence, and duration of soft X-ray flares). We used CMEs observed by the Large Angle and Spectrometric Coronagraph (LASCO) on board the Solar and Heliospheric Observatory (SOHO) mission and soft X-ray flares (C3.2 and above) observed by the GOES satellites during 1996 to 2005. We found that the distributions obey a power-law of the form: dN/dX~X^-alpha, where X is a flare parameter and dN is the number of events recorded within the interval [X, X+dX]. For the flares with (without) CMEs, we obtained the power-law index alpha=1.98+-0.05 (alpha=2.52+-0.03) for the peak flux, alpha=1.79+-0.05 (alpha=2.47+-0.11) for the fluence, and alpha=2.49+-0.11 (alpha=3.22+-0.15) for the duration. The power-law indices for flares without CMEs are steeper than those for flares with CMEs. The larger power-law index for flares without CMEs supports the possibility that nanoflares contribute to coronal heating.

astro-ph↗

arXiv2003

Direct Detection of a CME-Associated Shock in LASCO White Light Images

The LASCO C2 and C3 coronagraphs recorded a unique coronal mass ejection on April 2, 1999. The event did not have the typical three-part CME structure and involved a small filament eruption without any visibile overlying streamer ejecta. The event exhibited an unusually clear signature of a wave propagating at the CME flanks. The speed and density of the CME front and flanks were consistent with the existence of a shock. To better establish the nature of the white light wave signature, we employed a simple MHD simulation using the LASCO measurements as constraints. Both the measurements and the simulation strongly suggest that the white light feature is the density enhancement from a fast-mode MHD shock. In addition, the LASCO images clearly show streamers being deflected when the shock impinges on them. It is the first direct imaging of this interaction.

astro-ph↗

arXiv1999

LASCO Measurements of the Energetics of Coronal Mass Ejections

We examine the energetics of Coronal Mass Ejections (CMEs) with data from the LASCO coronagraphs on SOHO. The LASCO observations provide fairly direct measurements of the mass, velocity and dimensions of CMEs. Using these basic measurements, we determine the potential and kinetic energies and their evolution for several CMEs that exhibit a flux-rope morphology. Assuming flux conservation, we use observations of the magnetic flux in a variety of magnetic clouds near the Earth to determine the magnetic flux and magnetic energy in CMEs near the Sun. We find that the potential and kinetic energies increase at the expense of the magnetic energy as the CME moves out, keeping the total energy roughly constant. This demonstrates that flux rope CMEs are magnetically driven. Furthermore, since their total energy is constant, the flux rope parts of the CMEs can be considered to be a closed system above $\sim$ 2 $R_{\sun}$.

astro-ph↗

arXiv1999

The Relationship of Coronal Mass Ejections to Streamers

We have examined images from the Large Angle Spectroscopic Coronagraph (LASCO) to study the relationship of Coronal Mass Ejections (CMEs) to coronal streamers. We wish to test the suggestion (Low 1996) that CMEs arise from flux ropes embedded in a streamer erupting, thus disrupting the streamer. The data span a period of two years near sunspot minimum through a period of increased activity as sunspot numbers increased. We have used LASCO data from the C2 coronagraph which records Thomson scattered white light from coronal electrons at heights between 1.5 and 6R_sun. Maps of the coronal streamers have been constructed from LASCO C2 observations at a height of 2.5R_sun at the east and west limbs. We have superposed the corresponding positions of CMEs observed with the C2 coronagraph onto the synoptic maps. We identified the different kinds of signatures CMEs leave on the streamer structure at this height (2.5R_sun). We find four types of CMEs with respect to their effect on streamers: 1. CMEs that disrupt the streamer 2. CMEs that have no effect on the streamer, even though they are related to it. 3. CMEs that create streamer-like structures 4. CMEs that are latitudinally displaced from the streamer. This is the most extensive observational study of the relation between CMEs and streamers to date. Previous studies using SMM data have made the general statement that CMEs are mostly associated with streamers, and that they frequently disrupt it. However, we find that approximately 35% of the observed CMEs bear no relation to the pre-existing streamer, while 46% have no effect on the observed streamer, even though they appear to be related to it. Our conclusions thus differ considerably from those of previous studies.

astro-ph↗