Searcharxiv⌕ Search

arXiv subjects

R. Appleby

Publications and source records attributed to R. Appleby.

18 recordsLinked to original sources
arXiv2024

Interim report for the International Muon Collider Collaboration (IMCC)

The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.

physics.acc-ph↗
arXiv2017

Machine Layout and Performance

Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.

physics.acc-ph↗
arXiv2014

An ultracold electron facility in Manchester

An ultra-cold atom based electron source (CAES) facility has been built in the Photon Science Institute (PSI), University of Manchester. In this paper, the key components and working principles of this source are introduced. Pre-commissioning status of this facility and preliminary simulation results are presented.

physics.acc-ph↗
arXiv2013

Accelerator system for the PRISM based muon to electron conversion experiment

The next generation of lepton flavor violation experiments need high intensity and high quality muon beams. Production of such beams requires sending a short, high intensity proton pulse to the pion production target, capturing pions and collecting the resulting muons in the large acceptance transport system. The substantial increase of beam quality can be obtained by applying the RF phase rotation on the muon beam in the dedicated FFAG ring, which was proposed for the PRISM project.This allows to reduce the momentum spread of the beam and to purify from the unwanted components like pions or secondary protons. A PRISM Task Force is addressing the accelerator and detector issues that need to be solved in order to realize the PRISM experiment. The parameters of the required proton beam, the principles of the PRISM experiment and the baseline FFAG design are introduced. The spectrum of alternative designs for the PRISM FFAG ring are shown. Progress on ring main systems like injection and RF are presented. The current status of the study and its future directions are discussed.

physics.acc-ph↗
arXiv2010

Measurement of sigma(pp -> b anti-b X) at \sqrt(s)=7 TeV in the forward region

Decays of b hadrons into final states containing a D0 meson and a muon are used to measure the b anti-b production cross-section in proton-proton collisions at a centre-of-mass energy of 7 TeV at the LHC. In the pseudorapidity interval 2 < eta < 6 and integrated over all transverse momenta we find that the average cross-section to produce b-flavoured or anti-b-flavoured hadrons is (75.3 +/- 5.4 +/- 13.0) microbarns.

hep-ex↗
arXiv2010

Prompt K_short production in pp collisions at sqrt(s)=0.9 TeV

The production of K_short mesons in pp collisions at a centre-of-mass energy of 0.9 TeV is studied with the LHCb detector at the Large Hadron Collider. The luminosity of the analysed sample is determined using a novel technique, involving measurements of the beam currents, sizes and positions, and is found to be 6.8 +/- 1.0 microbarn^-1. The differential prompt K_short production cross-section is measured as a function of the K_short transverse momentum and rapidity in the region 0 < pT < 1.6 GeV/c and 2.5 < y < 4.0. The data are found to be in reasonable agreement with previous measurements and generator expectations.

hep-ex↗
arXiv2008

Photon production at the interaction point of the ILC

The intense beam-beam effect at the interaction point of the International Linear Collider (ILC) causes large disruption of the beams and the production of photons. These photons, arising dominantly through beamstrahlung emission, are problematic for the machine design as they need to be transported and dumped in a controlled way. In this work, we perform simulations of the beam-beam interaction to predict photon production rates and distributions for the different beam parameters considered at ILC. The results are expressed in terms of a set of cones of excluded power, allowing to define the beam-stay-clear requirements relevant for different cases and contexts. A comparison is also made with theoretical expectations. The suggested photon cone half-opening angles are 0.75 and 0.85 mrad in the horizontal and vertical planes, respectively. These cones cover all machine energies and parameter sets, and include the low power Compton photons.

physics.acc-ph↗
arXiv2006

New final doublets and power densities for the ILC small crossing angle layout

In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the International Linear Collider and reduce the power losses. The result is a set of three new final doublet layouts with improved beam transport properties. The effect of localised power deposition is considered, and its reduction using Tungsten liners.

physics.acc-ph↗
arXiv2006

Design of an interaction region with head-on collisions for the ILC

An interaction region (IR) with head-on collisions is considered as an alternative to the baseline configuration of the International Linear Collider (ILC) which includes two IRs with finite crossing-angles (2 and 20 mrad). Although more challenging for the beam extraction, the head-on scheme is favoured by the experiments because it allows a more convenient detector configuration, particularly in the forward region. The optics of the head-on extraction is revisited by separating the e+ and e- beams horizontally, first by electrostatic separators operated at their LEP nominal field and then using a defocusing quadrupole of the final focus beam line. In this way the septum magnet is protected from the beamstrahlung power. Newly optimized final focus and extraction optics are presented, including a first look at post-collision diagnostics. The influence of parasitic collisions is shown to lead to a region of stable collision parameters. Disrupted beam and beamstrahlung photon losses are calculated along the extraction elements.

physics.acc-ph↗
arXiv2006

Optimization of the e-e- option for the ILC

The e-e- running mode is one of the interesting physics options at the International Linear Collider (ILC). The luminosity for e-e- collisions is reduced by the beam-beam effects. The resulting beamstrahlung energy loss and beam-beam deflection angles as function of the vertical transverse offset are different compared to the e+e- collisions. In this paper, the dependence of these observables with the offset for different beam sizes has been analyzed to optimize performances for the e-e- mode, taking into account the requirements of the beam-beam deflection based intra-train feedback system. A first study of the implications for the final focus and extraction line optics is also presented for the cases of the 20 mrad and 2 mrad ILC base line crossing angle geometries.

physics.acc-ph↗
arXiv2006

The charged beam dumps for the international linear collider

The baseline configuration of the International Linear Collider requires 2 beam dumps per interaction region, each rated to 18MW of beam power, together with additional beam dumps for tuning purposes and machine protection. The baseline design uses high pressure moving water dumps, first developed for the SLC and used in the TESLA design, although a gas based dump is also being considered. In this paper we discuss the progress made by the international community on both physics and engineering studies for the beam dumps.

physics.acc-ph↗
arXiv2006

Improved final doublet designs for the ILC baseline small crossing angle scheme

The ILC baseline consists of two interaction regions, one with a 20mrad crossing angle and the other with a 2mrad crossing angle. It is known that the outgoing beam losses in the final doublet and subsequent extraction line are larger in the 2mrad than in the 20mrad layout. In this work, we exploit NbTi and Nb$_3$Sn superconducting magnet technologies to redesign and optimise the final doublet, with the aim of providing satisfactory outgoing disrupted beam power losses in this region. We present three new final doublet layouts, specifically optimised for the 500 GeV and the 1 TeV machines.

physics.acc-ph↗
arXiv2006

Particle tracking in the ILC extraction lines with DIMAD and BDSIM

The study of beam transport is of central importance to the design and performance assessment of modern particle accelerators. In this paper, we benchmark two contemporary codes, DIMAD and BDSIM, the latter being a relatively new tracking code built within the framework of GEANT4. We consider both the 20 mrad and 2 mrad extraction lines of the 500 GeV International Linear Collider (ILC) and we perform particle tracking studies of heavily disrupted post-collision electron beams. We find that the two codes give an almost equivalent description of the beam transport.

physics.acc-ph↗
arXiv2006

Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines

The study of beam transport is of central importance to the design and performance assessment of modern particle accelerators. In this work, we benchmark two contemporary codes - DIMAD and BDSIM, the latter being a relatively new tracking code built within the framework of GEANT4. We consider both the 20 mrad and 2 mrad extraction lines of the International Linear Collider (ILC) and we perform tracking studies of heavily disrupted post-collision electron beams. We find that the two codes mostly give an equivalent description of the beam transport.

physics.acc-ph↗
arXiv2006

The 2 mrad crossing-angle ILC interaction region and extraction line

A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on developing and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this paper, the most recent status of the 2mrad layout and the corresponding performance are presented.

physics.acc-ph↗
arXiv2006

The International Linear Collider beam dumps

The ILC beam dumps are a key part of the accelerator design. At Snowmass 2005, the current status of the beam dump designs were reviewed, and the options for the overall dump layout considered. This paper describes the available dump options for the baseline and the alternatives and considers issues for the dumps that require resolution.

physics.acc-ph↗
arXiv2005

The 2mrad horizontal crossing angle IR layout for a TeV ILC

The current status of the 2mrad crossing angle layout for the ILC is reviewed. The scheme developed in the UK and France is described and the performance discussed for a TeV machine. Secondly, the scheme developed at SLAC and BNL is then studied and modified for a TeV machine. We find that both schemes can handle the higher energy beam with modifications, and share many common features.

physics.acc-ph↗