arXiv subjects

R. B. Fiorito

Publications and source records attributed to R. B. Fiorito.

6 recordsLinked to original sources

arXiv2012

Beam Halo Imaging with a Digital Optical Mask

Beam halo is an important factor in any high intensity accelerator. It can cause difficulties in the control of the beam, emittance growth, particle loss and even damage to the accelerator. It is therefore essential to understand the mechanisms of halo formation and its dynamics in order to control and minimize its effects. Experimental measurement of the halo distribution is an important tool for such studies. In this paper, we present a new adaptive masking method that we have developed to image beam halo, which uses a digital micro-mirror-array device (DMD). This method has been thoroughly investigated in the laboratory using laser and white light sources, and with real beams produced by the University of Maryland Electron Ring (UMER). A high dynamic range ~10(5) has been demonstrated with this new method and recent studies indicate that this number can be exceeded for more intense beams by at least an order of magnitude. The method is flexible, easy to setup and can be used at any accelerator or light source. We present the results of our measurements of the performance of the method and images of beam halos produced under various experimental conditions.

physics.acc-ph↗

arXiv2008

Multi-component measurements of the Jefferson Lab energy recovery linac electron beam using optical transition and diffraction radiation

High brightness electron accelerators, such as energy recovery linacs (ERL), often have complex particle distributions that can create difficulties in beam transport as well as matching to devices such as wigglers used to generate radiation from the beam. Optical transition radiation (OTR), OTR interferometry (OTRI) and optical diffraction-transition radiation interferometry (ODTRI) have proven to be effective tools for diagnosing both the spatial and angular distributions of charged particle beams. OTRI and ODTRI have been used to measure rms divergences and optical transverse phase space mapping has been demonstrated using OTRI. In this work we present the results of diagnostic experiments using OTR and ODR conducted at the Jefferson Laboratory 115 MeV ERL which show the presence of two separate components within the spatial and angular distributions of the beam. By assuming a correlation between the spatial and angular features we estimate an rms emittance value for each of the two components.

physics.acc-ph↗

arXiv2007

Vector electromagnetic theory of transition and diffraction radiation with application to the measurement of longitudinal bunch size

We have developed a novel method based on vector electromagnetic theory and Schellkunoff's principles to calculate the spectral and angular distributions of transtion radiation (TR) and diffraction radiation (DR) produced by a charged particle interacting with an arbitrary target. The vector method predicts the polarization and spectral angular distributions of the radiation at an arbitrary distance form the source, i.e. in both the near and far fields, and in any direction of observation. The radiation fields of TR and DR calculated with the commonly used scalar Huygens model are shown to be limiting forms of those predicted by the vector theory and the regime of validity of the scalar theory is explicitly shown. Calculations of TR and DR done using the vector model are compared to results available in the literature for various limiting cases and for cases of more general interest. Our theory has important applications in the design of TR and DR diagnostics particularly those that utilize coherent TR or DR to infer the longitudinal bunch size and shape. A new technique to determine the bunch length using the angular distribution of coherent TR or DR is proposed.

physics.acc-ph↗

arXiv2006

Interference of diffraction and transition radiation and its application as a beam divergence diagnostic

We have observed the interference of optical diffraction radiation (ODR) and optical transition radiation (OTR) produced by the interaction of a relativistic electron beam with a micromesh foil and a mirror. The production of forward directed ODR from electrons passing through the holes and wires of the mesh and their separate interactions with backward OTR from the mirror are analyzed with the help of a simulation code. By careful choice of the micromesh properties, mesh-mirror spacing, observation wavelength and filter band pass, the interference of the ODR produced from the unperturbed electrons passing through the open spaces of the mesh and OTR from the mirror are observable above a broad incoherent background from interaction of the heavily scattered electrons passing through the mesh wires. These interferences (ODTRI) are sensitive to the beam divergence and can be used to directly diagnose this parameter. We compare experimental divergence values obtained using ODTRI, conventional OTRI, for the case when front foil scattering is negligible, and computed values obtained from transport code calculations and multiple screen beam size measurements. We obtain good agreement in all cases.

physics.acc-ph↗

arXiv2001

Optical Diffraction-Transition Radiation Interferometry and its Application to the Measurement of Beam Divergence

Optical transition radiation interferometry (OTRI) has been shown to be a very useful technique to measure the divergence of electron beams with energies in the range of 15-100 MeV. However, application of this method to low energy or very high quality beams is limited by scattering in the front foil of the interferometer. To overcome this limitation we propose to use a perforated front foil. For the beam energy and hole sizes we are considering, the unscattered beam electrons passing through the holes will produce diffraction radiation (ODR). The total radiation produced from the first and second foils then will be a spatially coherent sum of ODR and OTR from unscattered and scattered electrons. By controlling the number and size of the perforations, the inter-foil spacing, the thickness of the first foil and the wavelength and band pass of the observed radiation, the coherent interferences due to the unscattered portion of the beam can be isolated and observed. The visibility of these interferences can then be used to determine the rms beam divergence. We have developed a general computer code which can be used to calculate diffraction radiation from any type of perforation and another code to compute the ODR-OTR interference pattern for a given set of beam and optical parameters. These codes are employed in the design of an interferometer to measure the divergence of the ATF accelerator operating at 30 MeV. This beam will be used in an initial proof of principle experiment for the ODR-OTR interferometer. We present the results of our code calculations which show that the expected divergence, 200 micro radians, can be easily measured.

physics.acc-ph↗

arXiv2000

Diffraction Radiation Diagnostics for Moderate to High Energy Charged Particle Beams

Diffraction radiation (DR) is produced when a charged particle passes through an aperture or near a discontinuity in the media in which it is traveling. DR is closely related to transition radiation (TR), which is produced when a charged particle traverses the boundary between media with different dielectric constants. In contrast to TR, which is now extensively used for beam diagnostic purposes, the potential of DR as a non-interceptive, multi-parameter beam diagnostic remains largely undeveloped. For diagnostic measurements it is useful to observe backward reflected DR from an circular aperture or slit inclined with respect to the beam velocity. However, up to now, well founded equations for the spectral-angular intensities of backward DR from such apertures have not been available. We present a new derivation of the spectral angular intensity of backward DR produced from an inclined slit for two orientations of the slit axis, i.e. perpendicular and parallel to the plane of incidence. Our mathematical approach is generally applicable to any geometry and simpler than the Wiener Hofp method previously used to calculate DR from single knife edges. Our results for the slit are applied to the measurement of orthogonal beam size and divergence components. We discuss the problem of separating the simultaneous effects of these beam parameters on the angular distribution of DR and provide solutions to this difficulty. These incude using the horizontal and vertical polarization components of the radiation from a single slit and interferences from two inclined slits. Examples of DR diagnostics for a 500 MeV beam are presented and the current limitations to the technique are discussed.

physics.acc-ph↗