arXiv subjects

R. B. Metcalf

Publications and source records attributed to R. B. Metcalf.

At least 19 recordsLinked to original sources

arXiv2026

Euclid Quick Data Release (Q1). AstroVink: A vision transformer approach to find strong gravitational lens systems

We present AstroVink, a vision transformer classifier designed for automated identification of strong lens candidates in Euclid imaging. We build upon the DINOv2 encoder, fine tuned to distinguish between lens and non-lens galaxies. Our base model, trained on simulated strong lens systems and labelled non lenses, recovers 88 of the 110 lens candidates within the top 500 ranked candidates, corresponding to an inspection efficiency of one lens per 5.7 inspected objects in our test set. After the Q1 data release, which yielded about 500 lens candidates, we retrained the model using high confidence lens candidates and new negatives, initially flagged as potential lenses by other classifiers but rejected during visual inspection. The retrained network further improves performance, achieving recovery of all 110 systems within the same ranking and reducing the inspection effort to one lens per 4.5 inspected objects, demonstrating that incorporating real examples significantly enhances model generalisation. An analysis of training subsets revealed that the inclusion of realistic negative examples played a key role in this improvement. Finally, we applied the retrained model to the Q1 original selection of 1.08M targets, followed by a new round of Space Warps citizen science inspection and expert vetting, where we identified a total of eight Grade A and 26 Grade B new lens candidates. These results demonstrate that transformer based architectures can recover strong lens candidates with high efficiency in real Euclid data, while substantially reducing the number of candidates requiring visual inspection.

astro-ph.IM↗

arXiv2026

Euclid Quick Data Release (Q1). AgileLens: A scalable CNN-based pipeline for strong gravitational lens identification

We present an end-to-end, iterative pipeline for efficient identification of strong galaxy--galaxy lensing systems, applied to the Euclid Q1 imaging data. Starting from VIS catalogues, we reject point sources, apply a magnitude cut (I$_E$ $\leq$ 24) on deflectors, and run a pixel-level artefact/noise filter to build 96 $\times$ 96 pix cutouts; VIS+NISP colour composites are constructed with a VIS-anchored luminance scheme that preserves VIS morphology and NISP colour contrast. A VIS-only seed classifier supplies clear positives and typical impostors, from which we curate a morphology-balanced negative set and augment scarce positives. Among the six CNNs studied initially, a modified VGG16 (GlobalAveragePooling + 256/128 dense layers with the last nine layers trainable) performs best; the training set grows from 27 seed lenses (augmented to 1809) plus 2000 negatives to a colour dataset of 30,686 images. After three rounds of iterative fine-tuning, human grading of the top 4000 candidates ranked by the final model yields 441 Grade A/B candidate lensing systems, including 311 overlapping with the existing Q1 strong-lens catalogue, and 130 additional A/B candidates (9 As and 121 Bs) not previously reported. Independently, the model recovers 740 out of 905 (81.8%) candidate Q1 lenses within its top 20,000 predictions, considering off-centred samples. Candidates span I$_E$ $\simeq$ 17--24 AB mag (median 21.3 AB mag) and are redder in Y$_E$--H$_E$ than the parent population, consistent with massive early-type deflectors. Each training iteration required a week for a small team, and the approach easily scales to future Euclid releases; future work will calibrate the selection function via lens injection, extend recall through uncertainty-aware active learning, explore multi-scale or attention-based neural networks with fast post-hoc vetters that incorporate lens models into the classification.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine F -- Bright and low-redshift strong lenses

We present 72 additional galaxy-galaxy strong lenses that complement the sample discovered in the Euclid Quick Release 1 data (63.1 deg^2) of the Strong Lens Discovery Engine (SLDE) papers A-E. It is shown that previous pre-selection of potential lenses, which excluded objects from the Gaia catalogue, led to missing several bright and low-redshift strong lenses, adding more than 10% new strong lens candidates compared to the previous search. In total, the catalogue includes 38 "grade A" (confident) and 34 "grade B" (probable) candidates. These lenses are identified through a combination of two independent searches for bright nearby objects: one based on machine-learning models followed by expert visual inspection, and the other based solely on expert visual inspection, targeting objects not included in the initial machine-learning selection (a limitation identified only after extensive visual inspection). With these additional strong lens candidates, we augment the expected number of high-confidence candidates in the Euclid Wide Survey from previous forecasts to 120000. Detailed semi-automated lens modelling confirms at least 41 systems out of 72, a fraction consistent with that found in SLDE A (315 out of 488). These include: multiple edge-on disc lenses; sources with arcs near the lens centre; "red sources"; and an edge-on disk galaxy lensing a galaxy merger, producing two sets of lensed features, an Einstein ring and a doubly imaged component. The median redshift of these systems is $Δ$ z ~ 0.3 lower than that of the SLDE A sample.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, Sérsic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1). From simulations to sky: Advancing machine-learning lens detection with real Euclid data

In the era of large-scale surveys like Euclid, machine learning has become an essential tool for identifying rare yet scientifically valuable objects, such as strong gravitational lenses. However, supervised machine-learning approaches require large quantities of labelled examples to train on, and the limited number of known strong lenses has lead to a reliance on simulations for training. A well-known challenge is that machine-learning models trained on one data domain often underperform when applied to a different domain: in the context of lens finding, this means that strong performance on simulated lenses does not necessarily translate into equally good performance on real observations. In Euclid's Quick Data Release 1 (Q1), covering 63 deg2, 500 strong lens candidates were discovered through a synergy of machine learning, citizen science, and expert visual inspection. These discoveries now allow us to quantify this performance gap and investigate the impact of training on real data. We find that a network trained only on simulations recovers up to 92% of simulated lenses with 100% purity, but only achieves 50% completeness with 24% purity on real Euclid data. By augmenting training data with real Euclid lenses and non-lenses, completeness improves by 25-30% in terms of the expected yield of discoverable lenses in Euclid DR1 and the full Euclid Wide Survey. Roughly 20% of this improvement comes from the inclusion of real lenses in the training data, while 5-10% comes from exposure to a more diverse set of non-lenses and false-positives from Q1. We show that the most effective lens-finding strategy for real-world performance combines the diversity of simulations with the fidelity of real lenses. This hybrid approach establishes a clear methodology for maximising lens discoveries in future data releases from Euclid, and will likely also be applicable to other surveys such as LSST.

astro-ph.IM↗

arXiv2025

Euclid: A machine-learning search for dual and lensed AGN at sub-arcsec separations

Cosmological models of hierarchical structure formation predict the existence of a widespread population of dual accreting supermassive black holes (SMBHs) on kpc-scale separations, corresponding to projected distances < 0".8 at redshifts higher than 0.5. However, close companions to known active galactic nuclei (AGN) or quasars (QSOs) can also be multiple images of the object itself, strongly lensed by a foreground galaxy, as well as foreground stars in a chance superposition. Thanks to its large sky coverage, sensitivity, and high spatial resolution, Euclid offers a unique opportunity to obtain a large, homogeneous sample of dual/lensed AGN candidates with sub-arcsec projected separations. Here we present a machine learning approach, in particular a Convolutional Neural Network (CNN), to identify close companions to known QSOs down to separations of $\sim\,$0".15 comparable to the Euclid VIS point spread function (PSF). We studied the effectiveness of the CNN in identifying dual AGN and demonstrated that it outperforms traditional techniques. Applying our CNN to a sample of $\sim\,$6000 QSOs from the Q1 Euclid data release, we find a fraction of about 0.25% dual AGN candidates with separation $\sim\,$0".4 (corresponding to $\sim$3 kpc at z=1). Estimating the foreground contamination from stellar objects, we find that most of the pair candidates with separation higher than 0".5 are likely contaminants, while below this limit, contamination is expected to be less than 20%. For objects at higher separation (>0".5, i.e. 4 kpc at z=1), we performed PSF subtraction and used colour-colour diagrams to constrain their nature. We present a first set of dual/lensed AGN candidates detected in the Q1 Euclid data, providing a starting point for the analysis of future data releases.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine C: Finding lenses with machine learning

Strong gravitational lensing has the potential to provide a powerful probe of astrophysics and cosmology, but fewer than 1000 strong lenses have been confirmed so far. With a 0.16'' resolution covering a third of the sky, the Euclid telescope will revolutionise the identification of strong lenses, with 170 000 lenses forecasted to be discovered amongst the 1.5 billion galaxies it will observe. We present an analysis of the performance of five machine-learning models at finding strong gravitational lenses in the quick release of Euclid data (Q1) covering 63 deg2. The models have been validated by citizen scientists and expert visual inspection. We focus on the best-performing network: a fine-tuned version of the Zoobot pretrained model originally trained to classify galaxy morphologies in heterogeneous astronomical imaging surveys. Of the one million Q1 objects that Zoobot was tasked to find strong lenses within, the top 1000 ranked objects contain 122 grade A lenses (almost-certain lenses) and 41 grade B lenses (probable lenses). A deeper search with the five networks combined with visual inspection yielded 250 (247) grade A (B) lenses, of which 224 (182) are ranked in the top 20 000 by Zoobot. When extrapolated to the full Euclid survey, the highest ranked one million images will contain 75 000 grade A or B strong gravitational lenses.

astro-ph.GA↗

arXiv2025

Euclid: The Early Release Observations Lens Search Experiment

We investigated the ability of the Euclid telescope to detect galaxy-scale gravitational lenses. To do so, we performed a systematic visual inspection of the $0.7\,\rm{deg}^2$ Euclid Early Release Observations data towards the Perseus cluster using both the high-resolution $I_{\scriptscriptstyle\rm E}$ band and the lower-resolution $Y_{\scriptscriptstyle\rm E}$, $J_{\scriptscriptstyle\rm E}$, $H_{\scriptscriptstyle\rm E}$ bands. Each extended source brighter than magnitude 23 in $I_{\scriptscriptstyle\rm E}$ was inspected by 41 expert human classifiers. This amounts to $12\,086$ stamps of $10^{\prime\prime}\,\times\,10^{\prime\prime}$. We found $3$ grade A and $13$ grade B candidates. We assessed the validity of these $16$ candidates by modelling them and checking that they are consistent with a single source lensed by a plausible mass distribution. Five of the candidates pass this check, five others are rejected by the modelling, and six are inconclusive. Extrapolating from the five successfully modelled candidates, we infer that the full $14\,000\,{\rm deg}^2$ of the Euclid Wide Survey should contain $100\,000^{+70\,000}_{-30\,000}$ galaxy-galaxy lenses that are both discoverable through visual inspection and have valid lens models. This is consistent with theoretical forecasts of $170\,000$ discoverable galaxy-galaxy lenses in Euclid. Our five modelled lenses have Einstein radii in the range $0.\!\!^{\prime\prime}68\,<\,θ_\mathrm{E}\,<1.\!\!^{\prime\prime}24$, but their Einstein radius distribution is on the higher side when compared to theoretical forecasts. This suggests that our methodology is likely missing small-Einstein-radius systems. Whilst it is implausible to visually inspect the full Euclid dataset, our results corroborate the promise that Euclid will ultimately deliver a sample of around $10^5$ galaxy-scale lenses.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): The Strong Lensing Discovery Engine A -- System overview and lens catalogue

We present a catalogue of 497 galaxy-galaxy strong lenses in the Euclid Quick Release 1 data (63 deg$^2$). In the initial 0.45\% of Euclid's surveys, we double the total number of known lens candidates with space-based imaging. Our catalogue includes 250 grade A candidates, the vast majority of which (243) were previously unpublished. Euclid's resolution reveals rare lens configurations of scientific value including double-source-plane lenses, edge-on lenses, complete Einstein rings, and quadruply-imaged lenses. We resolve lenses with small Einstein radii ($θ_{\rm E} < 1''$) in large numbers for the first time. These lenses are found through an initial sweep by deep learning models, followed by Space Warps citizen scientist inspection, expert vetting, and system-by-system modelling. Our search approach scales straightforwardly to Euclid Data Release 1 and, without changes, would yield approximately 7000 high-confidence (grade A or B) lens candidates by late 2026. Further extrapolating to the complete Euclid Wide Survey implies a likely yield of over 100000 high-confidence candidates, transforming strong lensing science.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1) The Strong Lensing Discovery Engine B -- Early strong lens candidates from visual inspection of high velocity dispersion galaxies

We present a search for strong gravitational lenses in Euclid imaging with high stellar velocity dispersion ($σ_ν> 180$ km/s) reported by SDSS and DESI. We performed expert visual inspection and classification of $11\,660$ \Euclid images. We discovered 38 grade A and 40 grade B candidate lenses, consistent with an expected sample of $\sim$32. Palomar spectroscopy confirmed 5 lens systems, while DESI spectra confirmed one, provided ambiguous results for another, and help to discard one. The \Euclid automated lens modeler modelled 53 candidates, confirming 38 as lenses, failing to model 9, and ruling out 6 grade B candidates. For the remaining 25 candidates we could not gather additional information. More importantly, our expert-classified non-lenses provide an excellent training set for machine learning lens classifiers. We create high-fidelity simulations of \Euclid lenses by painting realistic lensed sources behind the expert tagged (non-lens) luminous red galaxies. This training set is the foundation stone for the \Euclid galaxy-galaxy strong lensing discovery engine.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine D -- Double-source-plane lens candidates

Strong gravitational lensing systems with multiple source planes are powerful tools for probing the density profiles and dark matter substructure of the galaxies. The ratio of Einstein radii is related to the dark energy equation of state through the cosmological scaling factor $β$. However, galaxy-scale double-source-plane lenses (DSPLs) are extremely rare. In this paper, we report the discovery of four new galaxy-scale double-source-plane lens candidates in the Euclid Quick Release 1 (Q1) data. These systems were initially identified through a combination of machine learning lens-finding models and subsequent visual inspection from citizens and experts. We apply the widely-used {\tt LensPop} lens forecasting model to predict that the full \Euclid survey will discover 1700 DSPLs, which scales to $6 \pm 3$ DSPLs in 63 deg$^2$, the area of Q1. The number of discoveries in this work is broadly consistent with this forecast. We present lens models for each DSPL and infer their $β$ values. Our initial Q1 sample demonstrates the promise of \Euclid to discover such rare objects.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine E -- Ensemble classification of strong gravitational lenses: lessons for Data Release 1

The Euclid Wide Survey (EWS) is expected to identify of order $100\,000$ galaxy-galaxy strong lenses across $14\,000$deg$^2$. The Euclid Quick Data Release (Q1) of $63.1$deg$^2$ Euclid images provides an excellent opportunity to test our lens-finding ability, and to verify the anticipated lens frequency in the EWS. Following the Q1 data release, eight machine learning networks from five teams were applied to approximately one million images. This was followed by a citizen science inspection of a subset of around $100\,000$ images, of which $65\%$ received high network scores, with the remainder randomly selected. The top scoring outputs were inspected by experts to establish confident (grade A), likely (grade B), possible (grade C), and unlikely lenses. In this paper we combine the citizen science and machine learning classifiers into an ensemble, demonstrating that a combined approach can produce a purer and more complete sample than the original individual classifiers. Using the expert-graded subset as ground truth, we find that this ensemble can provide a purity of $52\pm2\%$ (grade A/B lenses) with $50\%$ completeness (for context, due to the rarity of lenses a random classifier would have a purity of $0.05\%$). We discuss future lessons for the first major Euclid data release (DR1), where the big-data challenges will become more significant and will require analysing more than $\sim300$ million galaxies, and thus time investment of both experts and citizens must be carefully managed.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The first catalogue of strong-lensing galaxy clusters

We present the first catalogue of strong lensing galaxy clusters identified in the Euclid Quick Release 1 observations (covering $63.1\,\mathrm{deg^2}$). This catalogue is the result of the visual inspection of 1260 cluster fields. Each galaxy cluster was ranked with a probability, $\mathcal{P}_{\mathrm{lens}}$, based on the number and plausibility of the identified strong lensing features. Specifically, we identified 83 gravitational lenses with $\mathcal{P}_{\mathrm{lens}}>0.5$, of which 14 have $\mathcal{P}_{\mathrm{lens}}=1$, and clearly exhibiting secure strong lensing features, such as giant tangential and radial arcs, and multiple images. Considering the measured number density of lensing galaxy clusters, approximately $0.3\,\mathrm{deg}^{-2}$ for $\mathcal{P}_{\mathrm{lens}}>0.9$, we predict that \Euclid\ will likely see more than 4500 strong lensing clusters over the course of the mission. Notably, only three of the identified cluster-scale lenses had been previously observed from space. Thus, \Euclid has provided the first high-resolution imaging for the remaining $80$ galaxy cluster lenses, including those with the highest probability. The identified strong lensing features will be used for training deep-learning models for identifying gravitational arcs and multiple images automatically in \Euclid observations. This study confirms the huge potential of \Euclid for finding new strong lensing clusters, enabling exciting new discoveries on the nature of dark matter and dark energy and the study of the high-redshift Universe.

astro-ph.CO↗

arXiv2025

Euclid: Finding strong gravitational lenses in the Early Release Observations using convolutional neural networks

The Early Release Observations (ERO) from Euclid have detected several new galaxy-galaxy strong gravitational lenses, with the all-sky survey expected to find 170,000 new systems, greatly enhancing studies of dark matter, dark energy, and constraints on the cosmological parameters. As a first step, visual inspection of all galaxies in one of the ERO fields (Perseus) was carried out to identify candidate strong lensing systems and compared to the predictions from Convolutional Neural Networks (CNNs). However, the entire ERO data set is too large for expert visual inspection. In this paper, we therefore extend the CNN analysis to the whole ERO data set, using different CNN architectures and methodologies. Using five CNN architectures, we identified 8,469 strong gravitational lens candidates from IE-band cutouts of 13 Euclid ERO fields, narrowing them to 97 through visual inspection, including 14 grade A and 31 grade B candidates. We present the spectroscopic confirmation of a strong gravitational lensing candidate, EUCLJ081705.61+702348.8. The foreground lensing galaxy, an early-type system at redshift z = 0.335, and the background source, a star-forming galaxy at redshift z = 1.475 with [O II] emission, are both identified. Lens modeling using the Euclid strong lens modeling pipeline reveals two distinct arcs in a lensing configuration, with an Einstein radius of 1.18 \pm 0.03 arcseconds, confirming the lensing nature of the system. These findings highlight the importance of a broad CNN search to efficiently reduce candidates, followed by visual inspection to eliminate false positives and achieve a high-purity sample of strong lenses in Euclid.

astro-ph.GA↗

arXiv2025

Euclid: A complete Einstein ring in NGC 6505

We report the discovery of a complete Einstein ring around the elliptical galaxy NGC 6505, at $z=0.042$. This is the first strong gravitational lens discovered in Euclid and the first in an NGC object from any survey. The combination of the low redshift of the lens galaxy, the brightness of the source galaxy ($I_\mathrm{E}=18.1$ lensed, $I_\mathrm{E}=21.3$ unlensed), and the completeness of the ring make this an exceptionally rare strong lens, unidentified until its observation by Euclid. We present deep imaging data of the lens from the Euclid Visible Camera (VIS) and Near-Infrared Spectrometer and Photometer (NISP) instruments, as well as resolved spectroscopy from the Keck Cosmic Web Imager (KCWI). The Euclid imaging in particular presents one of the highest signal-to-noise ratio optical/near-infrared observations of a strong gravitational lens to date. From the KCWI data we measure a source redshift of $z=0.406$. Using data from the Dark Energy Spectroscopic Instrument (DESI) we measure a velocity dispersion for the lens galaxy of $σ_\star=303\pm15\,\mathrm{kms}^{-1}$. We model the lens galaxy light in detail, revealing angular structure that varies inside the Einstein ring. After subtracting this light model from the VIS observation, we model the strongly lensed images, finding an Einstein radius of 2.5 arcsec, corresponding to $2.1\,\mathrm{kpc}$ at the redshift of the lens. This is small compared to the effective radius of the galaxy, $R_\mathrm{eff}\sim 12.3\,\mathrm{arcsec}$. Combining the strong lensing measurements with analysis of the spectroscopic data we estimate a dark matter fraction inside the Einstein radius of $f_\mathrm{DM} = (11.1_{-3.5}^{+5.4})\%$ and a stellar initial mass-function (IMF) mismatch parameter of $α_\mathrm{IMF} = 1.26_{-0.08}^{+0.05}$, indicating a heavier-than-Chabrier IMF in the centre of the galaxy.

astro-ph.GA↗

arXiv2024

Euclid: Searches for strong gravitational lenses using convolutional neural nets in Early Release Observations of the Perseus field

The Euclid Wide Survey (EWS) is predicted to find approximately 170 000 galaxy-galaxy strong lenses from its lifetime observation of 14 000 deg^2 of the sky. Detecting this many lenses by visual inspection with professional astronomers and citizen scientists alone is infeasible. Machine learning algorithms, particularly convolutional neural networks (CNNs), have been used as an automated method of detecting strong lenses, and have proven fruitful in finding galaxy-galaxy strong lens candidates. We identify the major challenge to be the automatic detection of galaxy-galaxy strong lenses while simultaneously maintaining a low false positive rate. One aim of this research is to have a quantified starting point on the achieved purity and completeness with our current version of CNN-based detection pipelines for the VIS images of EWS. We select all sources with VIS IE < 23 mag from the Euclid Early Release Observation imaging of the Perseus field. We apply a range of CNN architectures to detect strong lenses in these cutouts. All our networks perform extremely well on simulated data sets and their respective validation sets. However, when applied to real Euclid imaging, the highest lens purity is just 11%. Among all our networks, the false positives are typically identifiable by human volunteers as, for example, spiral galaxies, multiple sources, and artefacts, implying that improvements are still possible, perhaps via a second, more interpretable lens selection filtering stage. There is currently no alternative to human classification of CNN-selected lens candidates. Given the expected 10^5 lensing systems in Euclid, this implies 10^6 objects for human classification, which while very large is not in principle intractable and not without precedent.

astro-ph.IM↗

arXiv2024

Euclid Preparation XXXIII. Characterization of convolutional neural networks for the identification of galaxy-galaxy strong lensing events

Forthcoming imaging surveys will potentially increase the number of known galaxy-scale strong lenses by several orders of magnitude. For this to happen, images of tens of millions of galaxies will have to be inspected to identify potential candidates. In this context, deep learning techniques are particularly suitable for the finding patterns in large data sets, and convolutional neural networks (CNNs) in particular can efficiently process large volumes of images. We assess and compare the performance of three network architectures in the classification of strong lensing systems on the basis of their morphological characteristics. We train and test our models on different subsamples of a data set of forty thousand mock images, having characteristics similar to those expected in the wide survey planned with the ESA mission \Euclid, gradually including larger fractions of faint lenses. We also evaluate the importance of adding information about the colour difference between the lens and source galaxies by repeating the same training on single-band and multi-band images. Our models find samples of clear lenses with $\gtrsim 90\%$ precision and completeness, without significant differences in the performance of the three architectures. Nevertheless, when including lenses with fainter arcs in the training set, the three models' performance deteriorates with accuracy values of $\sim 0.87$ to $\sim 0.75$ depending on the model. Our analysis confirms the potential of the application of CNNs to the identification of galaxy-scale strong lenses. We suggest that specific training with separate classes of lenses might be needed for detecting the faint lenses since the addition of the colour information does not yield a significant improvement in the current analysis, with the accuracy ranging from $\sim 0.89$ to $\sim 0.78$ for the different models.

astro-ph.GA↗

arXiv2020

Systematic errors in strong gravitational lensing reconstructions, a numerical simulation perspective

We present the analysis of a sample of twenty-four SLACS-like galaxy-galaxy strong gravitational lens systems with a background source and deflectors from the Illustris-1 simulation. We study the degeneracy between the complex mass distribution of the lenses, substructures, the surface brightness distribution of the sources, and the time delays. Using a novel inference framework based on Approximate Bayesian Computation, we find that for all the considered lens systems, an elliptical and cored power-law mass density distribution provides a good fit to the data. However, the presence of cores in the simulated lenses affects most reconstructions in the form of a Source Position Transformation. The latter leads to a systematic underestimation of the source sizes by 50 per cent on average, and a fractional error in $H_{0}$ of around $25_{-19}^{+37}$ per cent. The analysis of a control sample of twenty-four lens systems, for which we have perfect knowledge about the shape of the lensing potential, leads to a fractional error on $H_{0}$ of $12_{-3}^{+6}$ per cent. We find no degeneracy between complexity in the lensing potential and the inferred amount of substructures. We recover an average total projected mass fraction in substructures of $f_{\rm sub}<1.7-2.0\times10^{-3}$ at the 68 per cent confidence level in agreement with zero and the fact that all substructures had been removed from the simulation. Our work highlights the need for higher-resolution simulations to quantify the lensing effect of more realistic galactic potentials better, and that additional observational constraint may be required to break existing degeneracies.

astro-ph.GA↗