arXiv subjects

R. Bakker

Publications and source records attributed to R. Bakker.

5 recordsLinked to original sources

arXiv2024

The BlackGEM telescope array I: Overview

The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes. Each unit uses an f/5.5 modified Dall-Kirkham (Harmer-Wynne) design with a triplet corrector lens, and a 65cm primary mirror, coupled with a 110Mpix CCD detector, that provides an instantaneous field-of-view of 2.7~square degrees, sampled at 0.564\arcsec/pixel. The total field-of-view for the array is 8.2 square degrees. Each telescope is equipped with a six-slot filter wheel containing an optimised Sloan set (BG-u, BG-g, BG-r, BG-i, BG-z) and a wider-band 440-720 nm (BG-q) filter. Each unit telescope is independent from the others. Cloud-based data processing is done in real time, and includes a transient-detection routine as well as a full-source optimal-photometry module. BlackGEM has been installed at the ESO La Silla observatory as of October 2019. After a prolonged COVID-19 hiatus, science operations started on April 1, 2023 and will run for five years. Aside from its core scientific program, BlackGEM will give rise to a multitude of additional science cases in multi-colour time-domain astronomy, to the benefit of a variety of topics in astrophysics, such as infant supernovae, luminous red novae, asteroseismology of post-main-sequence objects, (ultracompact) binary stars, and the relation between gravitational wave counterparts and other classes of transients

astro-ph.IM↗

arXiv2020

Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling

KM3NeT is a research infrastructure being installed in the deep Mediterranean Sea. It will house a neutrino telescope comprising hundreds of networked moorings - detection units or strings equipped with optical instrumentation to detect the Cherenkov radiation generated by charged particles from neutrino-induced collisions in its vicinity. In comparison to moorings typically used for oceanography, several key features of the KM3NeT string are different: the instrumentation is contained in transparent and thus unprotected glass spheres; two thin Dyneema ropes are used as strength members; and a thin delicate backbone tube with fibre-optics and copper wires for data and power transmission, respectively, runs along the full length of the mooring. Also, compared to other neutrino telescopes such as ANTARES in the Mediterranean Sea and GVD in Lake Baikal, the KM3NeT strings are more slender to minimise the amount of material used for support of the optical sensors. Moreover, the rate of deploying a large number of strings in a period of a few years is unprecedented. For all these reasons, for the installation of the KM3NeT strings, a custom-made, fast deployment method was designed. Despite the length of several hundreds of metres, the slim design of the string allows it to be compacted into a small, re-usable spherical launching vehicle instead of deploying the mooring weight down from a surface vessel. After being lowered to the seafloor, the string unfurls to its full length with the buoyant launching vehicle rolling along the two ropes.The design of the vehicle, the loading with a string, and its underwater self-unrolling are detailed in this paper.

astro-ph.IM↗

arXiv2011

An Axi-Symmetric Segmented Composite SKA Dish Design: Performance and Production Analysis

A concept of an axi-symmetric dish as antenna reflector for the next generation radio telescope - the Square Kilometre Array (SKA) - is presented. The reflector is based on the use of novel thermoplastic composite material (reinforced with carbon fibre) in the context of the telescope design with wide band single pixel feeds. The baseline of this design represents an array of 100's to 1000's reflector antennas of 15-m diameter and covers frequencies from <1 to 10 GHz. The purpose of our study is the analysis of the production cost of the dish and its performance in combination with a realistic wideband feed (such as the 'Eleven Antenna' feed) over a wide frequency band and a range of elevation angles. The presented initial simulation results inidicate the potential of the proposed dish concept for low-cost and mass production and demonstrate sensitivity comparable to that of the presently considered off-set Gregorian reflector antenna with the same projected aperture area. We expect this observation to be independent of the choice of the feed, as several other single-pixel wideband feeds (that have been reported in the literature) have similar beamwidth and phase center location, both being rather constant with frequency.

astro-ph.IM↗

arXiv2002

A Cost-Efficient PC Based Frame Grabber as Beam Diagnostic Tool in an EPICS Environment

Analysis of video images is a common way to determine the properties of an electron or synchrotron radiation beam. At BESSY a cost-efficient frame grabber hardware controlled by a Windows PC allows one to perform such an analysis in real-time. Live video images on the PC monitor give operators a direct view of the beam, optionally enhanced by artificial coloring and graphical overlays. The application software has been integrated into the EPICS environment by including a Channel Access (CA) server. Thus the numerical results and the application's control commands are accessible over a network through CA Process Variables. A newly developed C++ class library is used to provide the variables with the usual attributes required by advanced CA clients such as graphical display managers.

physics.ins-det↗

arXiv2001

Signal Archiving and Retrieval: Essential Long Term Performance Tuning Tool

The first two years of user service of the third generation light source BESSY II emphasized the importance of a reliable, comprehensive and dense logging of a few thousand setpoints, readbacks, status and alarm values. Today data from sources with various characteristics residing in different protected networks are centrally collected and retrievable via an uncomplex CGI program to any desktop system on the site. Data post-processing tools cover Windows applications, IDL, SDDS and custom programs matching users skills and preferences. In this paper illustrative sample data explorations are described that underline the importance of the logging system for operations as well as for the understanding of singular events or long term drifts. Serious shortcomings of the present installation and focus of further development are described.

physics.acc-ph↗