Searcharxiv⌕ Search

arXiv subjects

R. Casas

Publications and source records attributed to R. Casas.

At least 37 records · Page 2Linked to original sources

The PAU Survey: Photometric redshift estimation in deep wide fields

We present photometric redshifts (photo-$z$) for the deep wide fields of the Physics of the Accelerating Universe Survey (PAUS), covering an area of $\sim$50 deg$^{2}$, for $\sim$1.8 million objects up to $i_{\textrm{AB}}<23$. The PAUS deep wide fields overlap with the W1 and W3 fields from CFHTLenS and the G09 field from KiDS/GAMA. Photo-$z$ are estimated using the 40 narrow bands (NB) of PAUS and the broad bands (BB) of CFHTLenS and KiDS. We compute the redshifts with the SED template-fitting code BCNZ, with a modification in the calibration technique of the zero-point between the observed and the modelled fluxes, that removes any dependence on spectroscopic redshift samples. We enhance the redshift accuracy by introducing an additional photo-$z$ estimate ($z_{\textrm{b}}$), obtained through the combination of the BCNZ and the BB-only photo-$z$. Comparing with spectroscopic redshifts estimates ($z_{\textrm{s}}$), we obtain a $σ_{68} \simeq 0.019$ for all galaxies with $i_{\textrm{AB}}<23$ and a typical bias $|z_{\textrm{b}}-z_{\textrm{s}}|$ smaller than 0.01. For $z_{\textrm{b}} \sim (0.10-0.75)$ we find $σ_{68} \simeq (0.003-0.02)$, this is a factor of $10-2$ higher accuracy than the corresponding BB-only results. We obtain similar performance when we split the samples into red (passive) and blue (active) galaxies. We validate the redshift probability $p(z)$ obtained by BCNZ and compare its performance with that of $z_{\textrm{b}}$. These photo-$z$ catalogues will facilitate important science cases, such as the study of galaxy clustering and intrinsic alignment at high redshifts ($z \lesssim 1$) and faint magnitudes.

astro-ph.CO↗

The stellar occultation by (319) Leona on 13 September 2023 in preparation for the occultation of Betelgeuse

On 12 December 2023, the star $α$ Orionis (Betelgeuse) will be occulted by the asteroid (319) Leona. This represents an extraordinary and unique opportunity to analyze the diameter and brightness distribution of Betelgeuse's photosphere with extreme angular resolution by studying the light curve as the asteroid occults the star from different points on Earth and at different wavelengths. Here we present observations of another occultation by Leona on 13 September 2023 to determine its projected shape and size in preparation for the December 12th event. The occultation observation campaign was highly successful. The effective diameter in projected area derived from the positive detections at 17 sites turned out to be 66 km $\pm$ 2 km using an elliptical fit to the instantaneous limb. The body is highly elongated, with dimensions of 79.6 $\pm$ 2.2 km x 54.8 $\pm$ 1.3 km in its long and short axis, respectively, at the occultation time. Also, an accurate position coming from the occultation, to improve the orbit determination of Leona for December 12 is provided.

astro-ph.EP↗

The PAU Survey: Narrow-band image photometry

PAUCam is an innovative optical narrow-band imager mounted at the William Herschel Telescope built for the Physics of the Accelerating Universe Survey (PAUS). Its set of 40 filters results in images that are complex to calibrate, with specific instrumental signatures that cannot be processed with traditional data reduction techniques. In this paper we present two pipelines developed by the PAUS data management team with the objective of producing science-ready catalogues from the uncalibrated raw images. The Nightly pipeline takes care of all image processing, with bespoke algorithms for photometric calibration and scatter-light correction. The Multi-Epoch and Multi-Band Analysis (MEMBA) pipeline performs forced photometry over a reference catalogue to optimize the photometric redshift performance. We verify against spectroscopic observations that the current approach delivers an inter-band photometric calibration of 0.8% across the 40 narrow-band set. The large volume of data produced every night and the rapid survey strategy feedback constraints require operating both pipelines in the Port d'Informació Cientifica data centre with intense parallelization. While alternative algorithms for further improvements in photo-z performance are under investigation, the image calibration and photometry presented in this work already enable state-of-the-art photometric redshifts down to iAB=23.0.

astro-ph.IM↗

The PAU Survey: Close galaxy pairs identification and analysis

Galaxy pairs constitute the initial building blocks of galaxy evolution, which is driven through merger events and interactions. Thus, the analysis of these systems can be valuable in understanding galaxy evolution and studying structure formation. In this work, we present a new publicly available catalogue of close galaxy pairs identified using photometric redshifts provided by the Physics of the Accelerating Universe Survey (PAUS). To efficiently detect them we take advantage of the high-precision photo$-z$ ($σ_{68} < 0.02$) and apply an identification algorithm previously tested using simulated data. This algorithm considers the projected distance between the galaxies ($r_p < 50$ kpc), the projected velocity difference ($ΔV < 3500$ km/s) and an isolation criterion to obtain the pair sample. We applied this technique to the total sample of galaxies provided by PAUS and to a subset with high-quality redshift estimates. Finally, the most relevant result we achieved was determining the mean mass for several subsets of galaxy pairs selected according to their total luminosity, colour and redshift, using galaxy-galaxy lensing estimates. For pairs selected from the total sample of PAUS with a mean $r-$band luminosity $10^{10.6} h^{-2} L_\odot$, we obtain a mean mass of $M_{200} = 10^{12.2} h^{-1} M_\odot$, compatible with the mass-luminosity ratio derived for elliptical galaxies. We also study the mass-to-light ratio $M/L$ as a function of the luminosity $L$ and find a lower $M/L$ (or steeper slope with $L$) for pairs than the one extrapolated from the measurements in groups and galaxy clusters.

astro-ph.GA↗

The PAU Survey & Euclid: Improving broad-band photometric redshifts with multi-task learning

Current and future imaging surveys require photometric redshifts (photo-zs) to be estimated for millions of galaxies. Improving the photo-z quality is a major challenge but is needed to advance our understanding of cosmology. In this paper we explore how the synergies between narrow-band photometric data and large imaging surveys can be exploited to improve broadband photometric redshifts. We used a multi-task learning (MTL) network to improve broadband photo-z estimates by simultaneously predicting the broadband photo-z and the narrow-band photometry from the broadband photometry. The narrow-band photometry is only required in the training field, which also enables better photo-z predictions for the galaxies without narrow-band photometry in the wide field. This technique was tested with data from the Physics of the Accelerating Universe Survey (PAUS) in the COSMOS field. We find that the method predicts photo-zs that are 13% more precise down to magnitude i_{AB} < 23; the outlier rate is also 40% lower when compared to the baseline network. Furthermore, MTL reduces the photo-z bias for high-redshift galaxies, improving the redshift distributions for tomographic bins with z>1. Applying this technique to deeper samples is crucial for future surveys such as \Euclid or LSST. For simulated data, training on a sample with i_{AB} <23, the method reduces the photo-z scatter by 16% for all galaxies with i_{AB}<25. We also studied the effects of extending the training sample with photometric galaxies using PAUS high-precision photo-zs, which reduces the photo-z scatter by 20% in the COSMOS field.

astro-ph.IM↗

Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary

The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data. This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.

astro-ph.IM↗

Overview of the Instrumentation for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) has embarked on an ambitious five-year survey to explore the nature of dark energy with spectroscopy of 40 million galaxies and quasars. DESI will determine precise redshifts and employ the Baryon Acoustic Oscillation method to measure distances from the nearby universe to z > 3.5, as well as measure the growth of structure and probe potential modifications to general relativity. In this paper we describe the significant instrumentation we developed for the DESI survey. The new instrumentation includes a wide-field, 3.2-deg diameter prime-focus corrector that focuses the light onto 5020 robotic fiber positioners on the 0.812 m diameter, aspheric focal surface. The positioners and their fibers are divided among ten wedge-shaped petals. Each petal is connected to one of ten spectrographs via a contiguous, high-efficiency, nearly 50 m fiber cable bundle. The ten spectrographs each use a pair of dichroics to split the light into three channels that together record the light from 360 - 980 nm with a resolution of 2000 to 5000. We describe the science requirements, technical requirements on the instrumentation, and management of the project. DESI was installed at the 4-m Mayall telescope at Kitt Peak, and we also describe the facility upgrades to prepare for DESI and the installation and functional verification process. DESI has achieved all of its performance goals, and the DESI survey began in May 2021. Some performance highlights include RMS positioner accuracy better than 0.1", SNR per \sqrtÅ > 0.5 for a z > 2 quasar with flux 0.28e-17 erg/s/cm^2/A at 380 nm in 4000s, and median SNR = 7 of the [OII] doublet at 8e-17 erg/s/cm^2 in a 1000s exposure for emission line galaxies at z = 1.4 - 1.6. We conclude with highlights from the on-sky validation and commissioning of the instrument, key successes, and lessons learned. (abridged)

astro-ph.IM↗

Euclid preparation. XVIII. The NISP photometric system

Euclid will be the first space mission to survey most of the extragalactic sky in the 0.95-2.02 $μ$m range, to a 5$σ$ point-source median depth of 24.4 AB mag. This unique photometric data set will find wide use beyond Euclid's core science. In this paper, we present accurate computations of the Euclid Y_E, J_E and H_E passbands used by the Near-Infrared Spectrometer and Photometer (NISP), and the associated photometric system. We pay particular attention to passband variations in the field of view, accounting among others for spatially variable filter transmission, and variations of the angle of incidence on the filter substrate using optical ray tracing. The response curves' cut-on and cut-off wavelengths - and their variation in the field of view - are determined with 0.8 nm accuracy, essential for the photometric redshift accuracy required by Euclid. After computing the photometric zeropoints in the AB mag system, we present linear transformations from and to common ground-based near-infrared photometric systems, for normal stars, red and brown dwarfs, and galaxies separately. A Python tool to compute accurate magnitudes for arbitrary passbands and spectral energy distributions is provided. We discuss various factors from space weathering to material outgassing that may slowly alter Euclid's spectral response. At the absolute flux scale, the Euclid in-flight calibration program connects the NISP photometric system to Hubble Space Telescope spectrophotometric white dwarf standards; at the relative flux scale, the chromatic evolution of the response is tracked at the milli-mag level. In this way, we establish an accurate photometric system that is fully controlled throughout Euclid's lifetime.

astro-ph.IM↗

Euclid Preparation: XIV. The Complete Calibration of the Color-Redshift Relation (C3R2) Survey: Data Release 3

The Complete Calibration of the Color-Redshift Relation (C3R2) survey is obtaining spectroscopic redshifts in order to map the relation between galaxy color and redshift to a depth of i ~ 24.5 (AB). The primary goal is to enable sufficiently accurate photometric redshifts for Stage IV dark energy projects, particularly Euclid and the Roman Space Telescope, which are designed to constrain cosmological parameters through weak lensing. We present 676 new high-confidence spectroscopic redshifts obtained by the C3R2 survey in the 2017B-2019B semesters using the DEIMOS, LRIS, and MOSFIRE multi-object spectrographs on the Keck telescopes. Combined with the 4454 redshifts previously published by this project, the C3R2 survey has now obtained and published 5130 high-quality galaxy spectra and redshifts. If we restrict consideration to only the 0.2 < z(phot) < 2.6 range of interest for the Euclid cosmological goals, then with the current data release C3R2 has increased the spectroscopic redshift coverage of the Euclid color space from 51% (as reported by Masters et al. 2015) to the current 91%. Once completed and combined with extensive data collected by other spectroscopic surveys, C3R2 should provide the spectroscopic calibration set needed to enable photometric redshifts to meet the cosmology requirements for Euclid, and make significant headway toward solving the problem for Roman.

astro-ph.CO↗

Euclid preparation: I. The Euclid Wide Survey

Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5σ$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_α$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$.

astro-ph.CO↗

Euclid: Estimation of the impact of correlated readout noise for flux measurements with the Euclid NISP instrument

The Euclid satellite, to be launched by ESA in 2022, will be a major instrument for cosmology for the next decades. \Euclid\ is composed of two instruments: the Visible (VIS) instrument and the Near Infrared Spectromete and Photometer (NISP). In this work we estimate the implications of correlated readout noise in the NISP detectors for the final in-flight flux measurements. Considering the multiple accumulated (MACC) readout mode, for which the UTR (Up The Ramp) exposure frames are averaged in groups, we derive an analytical expression for the noise covariance matrix between groups in the presence of correlated noise. We also characterize the correlated readout noise properties in the NISP engineering grade detectors using long dark integrations. For this purpose, we assume a $(1/f)^{\, α}$-like noise model and fit the model parameters to the data, obtaining typical values of $σ= 19.7^{+1.1}_{-0.8}$ e$^{-} \rm{Hz}^{-0.5}$, $f_{\rm{knee}} = (5.2^{+1.8}_{-1.3}) \times 10^{-3} \, \rm{Hz}$ and $α= 1.24 ^{+0.26}_{-0.21}$. Furthermore, via realistic simulations and using a maximum likelihood flux estimator we derive the bias between the input flux and the recovered one. We find that using our analytical expression for the covariance matrix of the correlated readout noise we diminish this bias by up to a factor of four with respect to the white noise approximation for the covariance matrix. Finally, we conclude that the final bias on the in-flight NISP flux measurements should still be negligible even in the white noise approximation, which is taken as a baseline for the Euclid\on-board processing

astro-ph.IM↗

Euclid preparation: VII. Forecast validation for Euclid cosmological probes

The Euclid space telescope will measure the shapes and redshifts of galaxies to reconstruct the expansion history of the Universe and the growth of cosmic structures. Estimation of the expected performance of the experiment, in terms of predicted constraints on cosmological parameters, has so far relied on different methodologies and numerical implementations, developed for different observational probes and for their combination. In this paper we present validated forecasts, that combine both theoretical and observational expertise for different cosmological probes. This is presented to provide the community with reliable numerical codes and methods for Euclid cosmological forecasts. We describe in detail the methodology adopted for Fisher matrix forecasts, applied to galaxy clustering, weak lensing and their combination. We estimate the required accuracy for Euclid forecasts and outline a methodology for their development. We then compare and improve different numerical implementations, reaching uncertainties on the errors of cosmological parameters that are less than the required precision in all cases. Furthermore, we provide details on the validated implementations that can be used by the reader to validate their own codes if required. We present new cosmological forecasts for Euclid. We find that results depend on the specific cosmological model and remaining freedom in each setup, i.e. flat or non-flat spatial cosmologies, or different cuts at nonlinear scales. The validated numerical implementations can now be reliably used for any setup. We present results for an optimistic and a pessimistic choice of such settings. We demonstrate that the impact of cross-correlations is particularly relevant for models beyond a cosmological constant and may allow us to increase the dark energy Figure of Merit by at least a factor of three.

astro-ph.CO↗

Euclid preparation: X. The Euclid photometric-redshift challenge

Forthcoming large photometric surveys for cosmology require precise and accurate photometric redshift (photo-z) measurements for the success of their main science objectives. However, to date, no method has been able to produce photo-$z$s at the required accuracy using only the broad-band photometry that those surveys will provide. An assessment of the strengths and weaknesses of current methods is a crucial step in the eventual development of an approach to meet this challenge. We report on the performance of 13 photometric redshift code single value redshift estimates and redshift probability distributions (PDZs) on a common set of data, focusing particularly on the 0.2--2.6 redshift range that the Euclid mission will probe. We design a challenge using emulated Euclid data drawn from three photometric surveys of the COSMOS field. The data are divided into two samples: one calibration sample for which photometry and redshifts are provided to the participants; and the validation sample, containing only the photometry, to ensure a blinded test of the methods. Participants were invited to provide a redshift single value estimate and a PDZ for each source in the validation sample, along with a rejection flag that indicates sources they consider unfit for use in cosmological analyses. The performance of each method is assessed through a set of informative metrics, using cross-matched spectroscopic and highly-accurate photometric redshifts as the ground truth. We show that the rejection criteria set by participants are efficient in removing strong outliers, sources for which the photo-z deviates by more than 0.15(1+z) from the spectroscopic-redshift (spec-z). We also show that, while all methods are able to provide reliable single value estimates, several machine-learning methods do not manage to produce useful PDZs. [abridged]

astro-ph.GA↗

Euclid preparation: IX. EuclidEmulator2 -- Power spectrum emulation with massive neutrinos and self-consistent dark energy perturbations

We present a new, updated version of the EuclidEmulator (called EuclidEmulator2), a fast and accurate predictor for the nonlinear correction of the matter power spectrum. Percent-level accurate emulation is now supported in the eight-dimensional parameter space of $w_0w_a$CDM$+\sum m_ν$models between redshift $z=0$ and $z=3$ for spatial scales within the range 0.01 $h$/Mpc $\leq k \leq$ 10 $h$/Mpc. In order to achieve this level of accuracy, we have had to improve the quality of the underlying N-body simulations used as training data: (1) we use self-consistent linear evolution of non-dark matter species such as massive neutrinos, photons, dark energy and the metric field, (2) we perform the simulations in the so-called N-body gauge, which allows one to interpret the results in the framework of general relativity, (3) we run over 250 high-resolution simulations with $3000^3$ particles in boxes of 1 (Gpc/$h$)${}^3$ volumes based on paired-and-fixed initial conditions and (4) we provide a resolution correction that can be applied to emulated results as a post-processing step in order to drastically reduce systematic biases on small scales due to residual resolution effects in the simulations. We find that the inclusion of the dynamical dark energy parameter $w_a$ significantly increases the complexity and expense of creating the emulator. The high fidelity of EuclidEmulator2 is tested in various comparisons against N-body simulations as well as alternative fast predictors like Halofit, HMCode and CosmicEmu. A blind test is successfully performed against the Euclid Flagship v2.0 simulation. Nonlinear correction factors emulated with EuclidEmulator2 are accurate at the level of 1% or better for 0.01 $h$/Mpc $\leq k \leq$ 10 $h$/Mpc and $z\leq3$ compared to high-resolution dark matter only simulations. EuclidEmulator2 is publicly available at https://github.com/miknab/EuclidEmulator2 .

astro-ph.CO↗

The PAU Survey: Photometric redshifts using transfer learning from simulations

In this paper we introduce the \textsc{Deepz} deep learning photometric redshift (photo-$z$) code. As a test case, we apply the code to the PAU survey (PAUS) data in the COSMOS field. \textsc{Deepz} reduces the $σ_{68}$ scatter statistic by 50\% at $i_{\rm AB}=22.5$ compared to existing algorithms. This improvement is achieved through various methods, including transfer learning from simulations where the training set consists of simulations as well as observations, which reduces the need for training data. The redshift probability distribution is estimated with a mixture density network (MDN), which produces accurate redshift distributions. Our code includes an autoencoder to reduce noise and extract features from the galaxy SEDs. It also benefits from combining multiple networks, which lowers the photo-$z$ scatter by 10 percent. Furthermore, training with randomly constructed coadded fluxes adds information about individual exposures, reducing the impact of photometric outliers. In addition to opening up the route for higher redshift precision with narrow bands, these machine learning techniques can also be valuable for broad-band surveys.

astro-ph.GA↗

Euclid preparation: VIII. The Complete Calibration of the Colour-Redshift Relation survey: VLT/KMOS observations and data release

The Complete Calibration of the Colour-Redshift Relation survey (C3R2) is a spectroscopic effort involving ESO and Keck facilities designed to empirically calibrate the galaxy colour-redshift relation - P(z|C) to the Euclid depth (i_AB=24.5) and is intimately linked to upcoming Stage IV dark energy missions based on weak lensing cosmology. The aim is to build a spectroscopic calibration sample that is as representative as possible of the galaxies of the Euclid weak lensing sample. In order to minimise the number of spectroscopic observations to fill the gaps in current knowledge of the P(z|C), self-organising map (SOM) representations of the galaxy colour space have been constructed. Here we present the first results of an ESO@ VLT Large Programme approved in the context of C3R2, which makes use of the two VLT optical and near-infrared multi-object spectrographs, FORS2 and KMOS. This paper focuses on high-quality spectroscopic redshifts of high-z galaxies observed with the KMOS spectrograph in the H- and K-bands. A total of 424 highly-reliable z are measured in the 1.3<=z<=2.5 range, with total success rates of 60.7% in the H-band and 32.8% in the K-band. The newly determined z fill 55% of high and 35% of lower priority empty SOM grid cells. We measured Halpha fluxes in a 1."2 radius aperture from the spectra of the spectroscopically confirmed galaxies and converted them into star formation rates. In addition, we performed an SED fitting analysis on the same sample in order to derive stellar masses, E(B-V), total magnitudes, and SFRs. We combine the results obtained from the spectra with those derived via SED fitting, and we show that the spectroscopic failures come from either weakly star-forming galaxies (at z<1.7, i.e. in the H-band) or low S/N spectra (in the K-band) of z>2 galaxies.

astro-ph.GA↗

Superluminous Supernovae from the Dark Energy Survey

We present a sample of 21 hydrogen-free superluminous supernovae (SLSNe-I), and one hydrogen-rich SLSN (SLSN-II) detected during the five-year Dark Energy Survey (DES). These SNe, located in the redshift range 0.220<z<1.998, represent the largest homogeneously-selected sample of SLSN events at high redshift. We present the observed g,r, i, z light curves for these SNe, which we interpolate using Gaussian Processes. The resulting light curves are analysed to determine the luminosity function of SLSN-I, and their evolutionary timescales. The DES SLSN-I sample significantly broadens the distribution of SLSN-I light curve properties when combined with existing samples from the literature. We fit a magnetar model to our SLSNe, and find that this model alone is unable to replicate the behaviour of many of the bolometric light curves. We search the DES SLSN-I light curves for the presence of initial peaks prior to the main light-curve peak. Using a shock breakout model, our Monte Carlo search finds that 3 of our 14 events with pre-max data display such initial peaks. However, 10 events show no evidence for such peaks, in some cases down to an absolute magnitude of <-16, suggesting that such features are not ubiquitous to all SLSN-I events. We also identify a red pre-peak feature within the light curve of one SLSN, which is comparable to that observed within SN2018bsz.

astro-ph.HE↗

First Cosmology Results using Type Ia Supernovae from the Dark Energy Survey: Constraints on Cosmological Parameters

We present the first cosmological parameter constraints using measurements of type Ia supernovae (SNe Ia) from the Dark Energy Survey Supernova Program (DES-SN). The analysis uses a subsample of 207 spectroscopically confirmed SNe Ia from the first three years of DES-SN, combined with a low-redshift sample of 122 SNe from the literature. Our "DES-SN3YR" result from these 329 SNe Ia is based on a series of companion analyses and improvements covering SN Ia discovery, spectroscopic selection, photometry, calibration, distance bias corrections, and evaluation of systematic uncertainties. For a flat LCDM model we find a matter density Omega_m = 0.331 +_ 0.038. For a flat wCDM model, and combining our SN Ia constraints with those from the cosmic microwave background (CMB), we find a dark energy equation of state w = -0.978 +_ 0.059, and Omega_m = 0.321 +_ 0.018. For a flat w0waCDM model, and combining probes from SN Ia, CMB and baryon acoustic oscillations, we find w0 = -0.885 +_ 0.114 and wa = -0.387 +_ 0.430. These results are in agreement with a cosmological constant and with previous constraints using SNe Ia (Pantheon, JLA).

astro-ph.CO↗