arXiv subjects

R. Cizeron

Publications and source records attributed to R. Cizeron.

6 recordsLinked to original sources

arXiv2011

Non-planar four-mirror optical cavity for high intensity gamma ray flux production by pulsed laser beam Compton scattering off GeV-electrons

As part of the R&D toward the production of high flux of polarised Gamma-rays we have designed and built a non-planar four-mirror optical cavity with a high finesse and operated it at a particle accelerator. We report on the main challenges of such cavity, such as the design of a suitable laser based on fiber technology, the mechanical difficulties of having a high tunability and a high mechanical stability in an accelerator environment and the active stabilization of such cavity by implementing a double feedback loop in a FPGA.

physics.acc-ph↗

arXiv2011

Production of gamma rays by pulsed laser beam Compton scattering off GeV-electrons using a non-planar four-mirror optical cavity

As part of the positron source R&D for future $e^+-e^-$ colliders and Compton based compact light sources, a high finesse non-planar four-mirror Fabry-Perot cavity has recently been installed at the ATF (KEK, Tsukuba, Japan). The first measurements of the gamma ray flux produced with a such cavity using a pulsed laser is presented here. We demonstrate the production of a flux of 2.7 $\pm$ 0.2 gamma rays per bunch crossing ($\sim3\times10^6$ gammas per second) during the commissioning.

physics.acc-ph↗

arXiv2011

High flux polarized gamma rays production: first measurements with a four-mirror cavity at the ATF

The next generation of e+/e- colliders will require a very intense flux of gamma rays to allow high current polarized positrons to be produced. This can be achieved by converting polarized high energy photons in polarized pairs into a target. In that context, an optical system consisting of a laser and a four-mirror passive Fabry-Perot cavity has recently been installed at the Accelerator Test Facility (ATF) at KEK to produce a high flux of polarized gamma rays by inverse Compton scattering. In this contribution, we describe the experimental system and present preliminary results. An ultra-stable four-mirror non planar geometry has been implemented to ensure the polarization of the gamma rays produced. A fiber amplifier is used to inject about 10W in the high finesse cavity with a gain of 1000. A digital feedback system is used to keep the cavity at the length required for the optimal power enhancement. Preliminary measurements show that a flux of about $4\times10^6 γ$/s with an average energy of about 24 MeV was generated. Several upgrades currently in progress are also described.

physics.acc-ph↗

arXiv2007

Characterisation of pulsed Carbon fiber illuminators for FIR instrument calibration

We manufactured pulsed illuminators emitting in the far infrared for the Planck-HFI bolometric instrument ground calibrations. Specific measurements have been conducted on these light sources, based on Carbon fibers, to understand and predict their properties. We present a modelisation of the temperature dependence of the thermal conductivity and the calorific capacitance of the fibers. A comparison between simulations and bolometer data is given, that shows the coherence of our model. Their small time constants, their stability and their emission spectrum pointing in the submm range make these illuminators a very usefull tool for calibrating FIR instruments.

astro-ph↗

arXiv2005

Summary of experimental studies at CERN on a positron source using crystal effects

New kind of positron sources for future linear colliders, where the converter is a tungsten crystal oriented on the <111> axis, has been studied at CERN in the WA103 experiment. In such sources the photons which create the $e^+ e^-$ pairs result from channeling radiation and coherent bremsstrahlung. In this experiment electron beams of 6 and 10 GeV were sent on different kinds of targets: a 4 mm thick crystal, a 8 mm thick crystal and a compound taraget (4 mm crystal + 4 mm amorphous disk). An amorphous tungsten target 20 mm thick was also used for comparison with the 8 mm crystal. Tracks of outgoing charged particles were detected and analyzed by a drift chamber in a magnetic field. The energy and angle spectra of the positrons were obtained for energies up to 150 MeV and angles up to 30 degrees. The measured positron distribution in momentum space (longitudinal versus transverse) is also presented, giving a full momentum space description of the source. Results on outgoing photons are also presented. A significant enhancement of both photon and positron production is clearly observed. At 10 GeV incident energy, the positron enhancement factor is 4 for the 4 mm crystal, about 2 for the 8 mm crystal. Besides, the simulation code for the crystal processes is validated by a quite good agreement between the simulated and experimental spectra, both for positrons and photons.

physics.ins-det↗

arXiv2000

Experimental Determination of the Characteristics of a Positron Source Using Channeling

Numerical simulations and `proof of principle' experiments showed clearly the interest of using crystals as photon generators dedicated to intense positron sources for linear colliders. An experimental investigation, using a 10 GeV secondary electron beam, of the SPS-CERN, impinging on an axially oriented thick tungsten crystal, has been prepared and operated between May and August 2000. After a short recall on the main features of positron sources using channeling in oriented crystals, the experimental set-up is described. A particular emphasis is put on the positron detector made of a drift chamber, partially immersed in a magnetic field. The enhancement in photon and positron production in the aligned crystal have been observed in the energy range 5 to 40 GeV, for the incident electrons, in crystals of 4 and 8 mm as in an hybrid target. The first results concerning this experiment are presented hereafter.

physics.acc-ph↗