arXiv subjects

R. Gröger

Publications and source records attributed to R. Gröger.

12 recordsLinked to original sources

arXiv2014

Calculation of dislocation positions and curved transition pathways in BCC crystals from atomic displacements

The thermodynamic description of dislocation glide in crystals depends crucially on the shape of the Peierls barrier that the dislocation has to overcome when moving in the lattice. While the height of this barrier can be obtained unequivocally using saddle-point search algorithms such as the Nudged Elastic Band (NEB) method, its exact shape depends on the chosen approximation of the transition pathway of the system. The purpose of this paper is to formulate a procedure that allows to identify the position of the dislocation directly from the displacements of atoms in its core. We investigate the performance of this model by calculating curved paths of a 1/2[111] screw dislocation in tungsten from a series of images obtained recently using the NEB method at zero applied stress and for positive/negative shear stresses perpendicular to the slip direction. The Peierls barriers plotted along these curved paths are shown to be quite different from those obtained previously by assuming the straight dislocation path.

cond-mat.mtrl-sci↗

arXiv2013

Which stresses affect the glide of screw dislocations in bcc metals?

By direct application of stress in molecular statics calculations we identify the stress components that affect the glide of 1/2<111> screw dislocations in bcc tungsten. These results prove that the hydrostatic stress and the normal stress parallel to the dislocation line do not play any role in the dislocation glide. Therefore, the Peierls stress of the dislocation cannot depend directly on the remaining two normal stresses that are perpendicular to the dislocation, as proposed by Koester A, Ma A, Hartmaier A. Acta Mater 2012;60:3894 but, instead, on their combination that causes an equibiaxial tension-compression (and thus shear) in the plane perpendicular to the dislocation line. The Peierls stress of 1/2<111> screw dislocations then depends only on the orientation of the plane in which the shear stress parallel to the Burgers vector is applied and on the magnitude and orientation of the shear stress perpendicular to the slip direction.

cond-mat.mtrl-sci↗

arXiv2013

Interaction of Epithelial Cells with Surfaces and Surfaces Decorated by Molecules

A detailed understanding of the interface between living cells and substrate materials is of rising importance in many fields of medicine, biology and biotechnology. Cells at interfaces often form epithelia. The physical barrier that they form is one of their main functions. It is governed by the properties of the networks forming the cytoskeleton systems and by cell-to-cell contacts. Different substrates with varying surface properties modify the migration velocity of the cells. On the one hand one can change the materials composition. Organic and inorganic materials induce differing migration velocities in the same cell system. Within the same class of materials, a change of the surface stiffness or of the surface energy modifies the migration velocity, too. For our cell adhesion studies a variety of different, homogeneous substrates were used (polymers, bio-polymers, metals, oxides). In addition, an effective lithographic method, Polymer Blend Lithography (PBL), is reported, to produce patterned Self-Assembled Monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. This we achieve without the use of conventional lithography like e-beam or UV lithography, only by using self-organization. These surfaces are decorated with a Teflon-like and with an amino-functionalized molecular layer. The resulting pattern is a copy of a previously created self-organized polymer pattern, featuring a scalable lateral domain size in the sub-micron range down below 100 nanometers. The resulting monolayer pattern features a high chemical and biofunctional contrast with feature sizes in the range of cell adhesion complexes like e.g. focal adhesion points.

physics.bio-ph↗

arXiv2011

On the importance of constrained atomic relaxations in the Nudged Elastic Band calculations of the Peierls barriers of dislocations

We demonstrate that the straightforward application of the Nudged Elastic Band (NEB) method does not determine the correct Peierls barrier of 1/2<111> screw dislocations in BCC metals. Although this method guarantees that the states (images) of the system are distributed uniformly along the minimum energy path, it does not imply that the dislocation positions are distributed uniformly along this path. In fact, clustering of dislocation positions near potential minima occurs which leads to an overestimate of both the slope of the Peierls barrier and the Peierls stress. We propose a modification in which the NEB method is applied only to a small number of degrees of freedom that determine the position of the dislocation, while all other coordinates of atoms are relaxed by molecular statics as in any atomistic study. This modified NEB method with relaxations gives the Peierls barrier that increases smoothly with the dislocation position and the corresponding Peierls stress agrees well with that evaluated by the direct application of stress in the atomistic modeling of the dislocation glide.

cond-mat.mtrl-sci↗

arXiv2010

On the incompatibility of strains and its application to mesoscopic studies of plasticity

Structural transitions are invariably affected by lattice distortions. If the body is to remain crack-free, the strain field cannot be arbitrary but has to satisfy the Saint-Venant compatibility constraint. Equivalently, an incompatibility constraint consistent with the actual dislocation network has to be satisfied in media with dislocations. This constraint can be incorporated into strain-based free energy functionals to study the influence of dislocations on phase stability. We provide a systematic analysis of this constraint in three dimensions and show how three incompatibility equations accommodate an arbitrary dislocation density. This approach allows the internal stress field to be calculated for an anisotropic material with spatially inhomogeneous microstructure and distribution of dislocations by minimizing the free energy. This is illustrated by calculating the stress field of an edge dislocation and comparing it with that of an edge dislocation in an infinite isotropic medium. We outline how this procedure can be utilized to study the interaction of plasticity with polarization and magnetization.

cond-mat.mtrl-sci↗

arXiv2010

Influence of dislocations on the spatial variation of microstructure in martensites

The continuum theory of dislocations, as developed predominantly by Kröner and Kosevich, views each dislocation as a source of incompatibility of strains. We show that this concept can be employed efficiently in the Landau free energy functional to develop a mean-field mesoscopic model of materials with dislocations. The order parameters that represent the distortion of the parent phase (often of cubic symmetry) are written in terms of elastic strains which are themselves coupled by incompatibility constraints. Since the "strength" of the incompatibility depends on the local density of dislocations, the presence of dislocations affects the evolution of the microstructure and vice versa. An advantage of this formulation is that long range anisotropic interactions between dislocations appear naturally in the formulation of the free energy. Owing to the distortion of the crystal structure around dislocations, their presence in multiphase materials causes heterogeneous nucleation of the product phase and thus also shifts of the transformation temperature. This novel field-theoretical approach is very convenient as it allows to bridge the gap in studying the behavior of materials at the length and time scales that are not attainable by atomistic or macroscopic models.

cond-mat.mtrl-sci↗

arXiv2008

Atomistic studies of transformation pathways and energetics in plutonium

One of the most challenging problems in understanding the structural phase transformations in Pu is to determine the energetically favored, continuous atomic pathways from one crystal symmetry to another. This problem involves enumerating candidate pathways and studying their energetics to garner insight into instabilities and energy barriers. The purpose of this work is to investigate the energetics of two transformation pathways for the delta to alpha' transformation in Pu that were recently proposed [Lookman et al., Phys. Rev. Lett. 100:145504, 2008] on the basis of symmetry. These pathways require the presence of either an intermediate hexagonal closed-packed (hcp) structure or a simple hexagonal (sh) structure. A subgroup of the parent fcc and the intermediate hexagonal structure, which has trigonal symmetry, facilitates the transformation to the intermediate hcp or sh structure. Phonons then break the translational symmetry from the intermediate hcp or sh structure to the final monoclinic symmetry of the alpha' structure. We perform simulations using the modified embedded atom method (MEAM) for Pu to investigate these candidate pathways. Our main conclusion is that the path via hcp is energetically favored and the volume change for both pathways essentially occurs in the second step of the transformation, i.e. from the intermediate sh or hcp to the monoclinic structure. Our work also highlights the deficiency of the current state-of-the-art MEAM potential in capturing the anisotropy associated with the lower symmetry monoclinic structure.

cond-mat.mtrl-sci↗

arXiv2008

Breakdown of the Schmid law in bcc molybdenum related to the effect of shear stress perpendicular to the slip direction

The breakdown of the Schmid law in bcc metals has been known for a long time. The asymmetry of shearing in the slip direction <111> in the positive and negative sense, respectively, commonly identified with the twinning-antitwinning asymmetry, is undoubtedly one of the reasons. However, effect of stress components other than the shear stress in the slip direction may be important. In this paper we investigate by atomistic modeling the effect of shear stresses perpendicular to the Burgers vector on the glide of a/2<111> screw dislocations. We show that these shear stresses can significantly elevate or reduce the critical resolved shear stress (CRSS) in the direction of the Burgers vector needed for the dislocation motion, i.e. the Peierls stress. This occurs owing to the changes of the core induced by these stresses. This effect may be the reason why slip systems with smaller Schmid factors may be preferred over that with the largest Schmid factor.

cond-mat.mtrl-sci↗

arXiv2008

Defect-induced incompatibility of elastic strains: dislocations within the Landau theory of martensitic phase transformations

In dislocation-free martensites the components of the elastic strain tensor are constrained by the Saint-Venant compatibility condition which guarantees continuity of the body during external loading. However, in dislocated materials the plastic part of the distortion tensor introduces a displacement mismatch that is removed by elastic relaxation. The elastic strains are then no longer compatible in the sense of the Saint-Venant law and the ensuing incompatibility tensor is shown to be proportional to the gradients of the Nye dislocation density tensor. We demonstrate that the presence of this incompatibility gives rise to an additional long-range contribution in the inhomogeneous part of the Landau energy functional and to the corresponding stress fields. Competition amongst the local and long-range interactions results in frustration in the evolving order parameter (elastic) texture. We show how the Peach-Koehler forces and stress fields for any distribution of dislocations in arbitrarily anisotropic media can be calculated and employed in a Fokker-Planck dynamics for the dislocation density. This approach represents a self-consistent scheme that yields the evolutions of both the order parameter field and the continuous dislocation density. We illustrate our method by studying the effects of dislocations on microstructure, particularly twinned domain walls, in an Fe-Pd alloy undergoing a martensitic transformation.

cond-mat.stat-mech↗

arXiv2008

Multiscale modeling of plastic deformation of molybdenum and tungsten: I. Atomistic studies of the core structure and glide of 1/2<111> screw dislocations at 0 K

Owing to their non-planar cores 1/2<111> screw dislocations govern the plastic deformation of BCC metals. Atomistic studies of the glide of these dislocations at 0 K have been performed using Bond Order Potentials for molybdenum and tungsten that account for the mixed metallic and covalent bonding in transition metals. When applying pure shear stress in the slip direction it displays significant twinning-antitwinning asymmetry for molybdenum but not for tungsten. However, for tensile/compressive loading the Schmid law breaks down in both metals, principally due to the effect of shear stresses perpendicular to the slip direction that alter the dislocation core. Recognition of this phenomenon forms a basis for the development of physically based yield criteria that capture the breakdown of the Schmid law in BCC metals. Moreover, dislocation glide may be preferred on {110} planes other than the most highly stressed one, which is reminiscent of the anomalous slip observed in many BCC metals.

cond-mat.mtrl-sci↗

arXiv2008

Multiscale modeling of plastic deformation of molybdenum and tungsten: II. Yield criterion for single crystals based on atomistic studies of glide of 1/2<111> screw dislocations

Based on the atomistic studies presented in Part I we develop analytical yield criteria for single crystals that capture the effect of shear stresses other than the Schmid stress (non-glide stresses) on the shear stress needed for dislocation glide (Peierls stress). These yield criteria characterize a non-associated plastic flow that originates owing to the complex response of 1/2<111> screw dislocations to an applied stress tensor. Employing these criteria we identify the operative slip systems for tensile/compressive loading along various axes within the standard stereographic triangle and determine the ensuing tension-compression asymmetry. This result is in an excellent qualitative agreement with available experimental data. Moreover, using the constructed yield criteria within the Taylor homogenization procedure, we demonstrate that effects associated with non-planar cores of screw dislocations persist in random polycrystals. This affects significantly critical phenomena such as shear localization, which is demonstrated by analyzing the cavitation in a ductile plastic solid.

cond-mat.mtrl-sci↗

arXiv2008

Multiscale modeling of plastic deformation of molybdenum and tungsten: III. Effects of temperature and plastic strain rate

In this paper we develop a link between the atomic-level modeling of the glide of 1/2<111> screw dislocations at 0 K and the thermally activated motion of these dislocations via nucleation of pairs of kinks. For this purpose, we introduce the concept of a hypothetical Peierls barrier, which reproduces all the aspects of the dislocation glide at 0 K resulting from the complex response to non-glide stresses and is expressed in a compact form by the yield criteria advanced in Part II. To achieve this the barrier is dependent not only on the crystal symmetry and interatomic bonding but also on the applied stress tensor. Standard models are then employed to evaluate the activation enthalpy of kink-pairs formation, which is now also a function of the full applied stress tensor. The transition states theory links then this mechanism with the temperature and strain rate dependence of the yield stress.

cond-mat.mtrl-sci↗