arXiv subjects

R. Hahn

Publications and source records attributed to R. Hahn.

6 recordsLinked to original sources

arXiv2025

Three-fold Superstructured Superlattice HfN/HfAlN Thin Films for Enhanced Toughness

To simultaneously achieve high hardness and high toughness in protective coatings remains a fundamental challenge. Here, we harness the superlattice architecture to combine Koehler hardening while the coherent interfaces reduce the crack driving force and improve toughness, enabling coatings that are both hard and damage tolerant. We design and fabricate epitaxial HfN$_{1.33}$/Hf$_{0.76}$Al$_{0.24}$N$_{1.15}$ superlattices, deposited on MgO(001) substrates using low-energy, high-flux ion-assisted reactive magnetron sputtering. These superlattices with bilayer periods ranging from 6 to 20 nm, exhibit a unique three-fold superstructure, confirmed by X-ray diffraction and reciprocal space mapping (RSM). Each constituent forms distinct 3D checkerboard superstructures, with a period of 7.5 {\AA} for HfN and 12.5 A for HfAlN. RSMs further reveal low mosaicity, high crystalline quality, and in-plane compressive strains, indicating well preserved coherence across interfaces. Mechanical testing shows that the superlattices maintain the high hardness of HfAlN (\~36 GPa) independent of bilayer period, while surpassing the softer HfN (~27 GPa), consistent with interface-driven Koehler strengthening. Micropillar compression shows brittle fracture on the {110}<110> system, yet with distributed cracking and faster mechanical recovery compared to monolithic films, suggesting improved toughness. Cube-corner indentation further corroborate this behavior, with pile-up and suppressed fracture events. These results demonstrate that epitaxial HfN/HfAlN superlattices uniquely combine high hardness with improved toughness, enabled by their three-fold superstructured architecture. Leveraging the intrinsic high-temperature stability of HfN-based materials, this design offers a robust pathway toward next-generation protective coatings capable of maintaining performance under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2025

Growth Mechanisms and Mechanical Response of 3D Superstructured Cubic and Hexagonal Hf$_{1-x}$Al$_x$N Thin Films

Transition metal aluminum nitrides are a technologically important class of multifunctional ceramics, however, the HfAlN system remains largely unexplored. We investigate phase stability, nanostructure design, and mechanical behavior of Hf$_{1-x}$Al$_x$N$_y$ thin films deposited on MgO(001) substrates using ion-assisted reactive magnetron sputtering. Compared to growth temperature and ion assistance, backscattered Ar neutrals are shown to have a dominant influence on the film structure. The Al-rich (x > 0.41) films form a nanocrystalline morphology consisting of Hf- and Al-rich nanodomains in a wurtzite-hexagonal(h) 0001 fiber-texture exhibiting about 22 GPa hardness, considerably higher than that of a binary AlN. For low Al contents, x < 0.30, surface-driven spinodal decomposition by energetic Ar neutrals during deposition in combination with quenching of sub-surface diffusion results in an unusual - and unique for nitrides - three-dimensional checkerboard superstructure of AlN- and HfN-rich nanodomains in the single-crystal rocksalt-cubic (c) phase. Lattice-resolved scanning transmission electron microscopy complemented with x-ray and electron diffraction reveals that the superstructure periodicity extends along <100> directions and the size increases linearly from 9 to 13 A with rising Al content. Consequently, the nanoindentation hardness increases sharply from 26 GPa for HfN$_y$, to \~38 GPa for c-Hf$_{1-x}$Al$_x$N$_y$, due to dislocation pinning at the superstructure strain fields. Micropillar compression of c-Hf$_{0.93}$Al$_{0.07}$N$_{1.15}$ shows a considerably higher yield stress compared to HfN$_y$ and controlled brittle fracture occurs via {110}<011> slip systems, attributed to superstructure inhibited dislocation motion. In contrast, nanocrystalline h-Hf$_{0.59}$Al$_{0.41}$N$_{1.23}$ exhibits a high yield stress and limited plasticity before strain burst failure.

cond-mat.mtrl-sci↗

arXiv2023

High repetition rate sub ns-electron pulses from Resonant Pulsed Rydberg Field Ionization

Using Resonant Pulsed Rydberg Field-ionization (RPRFI) technique, we generate low-energy electron bunches at high repetition rates. By combining continuous-wave laser excitation with a pulsed electric field, this method selectively ionizes Rydberg-Stark states in cesium atoms, producing sub-ns long electron bunches (down to $\sim 250\:\textrm{ps}$) at a repetition rate of $\sim 10\:\textrm{MHz}$. The method is demonstrated to offer significant advantages in terms of flexibility in the ionization repetition rate and pulse delay adjustments. The RPRFI method holds promise for applications in high-resolution electron microscopy and spectroscopy, potentially for overcoming the limitations of traditional electron sources in terms of brightness and energy spread.

physics.atom-ph↗

arXiv2019

Narrow-Band Pulsed Electron Source Based on Near-Threshold Photoionization of Cs in a Magneto-Optical Trap

The newly developed method of time-of-flight (ToF) momentum microscopy was used to analyse the cold electron emission from a Cs 3D magneto-optical trap (MOT). Three-step resonant photoionization was implemented via two intermediate states (6P3/2 pumped with 852 nm laser and 7S1/2 with 1470 nm) and a tuneable femtosecond Ti:sapphire laser for the final ionization step. The magnetic field of the MOT is switched off during the photoionization step. The natural bandwidth of the fs-laser is reduced to 4 meV using optical spectral filters. Precise tuning of the photon energy makes it possible to observe the transition regime between direct photoemission into the open continuum and field induced ionization of highly-excited Rydberg states. The paths can be identified by their characteristic dependency on the extraction field and on the Ti:sapphire polarization. ToF analysis allowed us to disentangle the ionization paths and the dependence of the spatio-temporal distribution of the cold electrons on the polarization of the ionizing laser.

physics.atom-ph↗

arXiv2016

Bipolar Anodization Enables the Fabrication of Controlled Arrays of TiO2 Nanotube Gradients

We report here a new concept, the use of bipolar electrochemistry, which allows the rapid and wireless growth of self-assembled TiO2 NT layers that consist of highly defined and controllable gradients in NT length and diameter. The gradient height and slope can be easily tailored with the time of electrolysis and the applied electric field, respectively. As this technique allows obtaining in one run a wide range of self-ordered TiO2 NT dimensions, it provides the basis for rapid screening of TiO2 NT properties. In two examples, we show how these gradient arrays can be used to screen for an optimized photocurrent response from TiO2 NT based devices such as dye-sensitized solar cells.

cond-mat.mes-hall↗

arXiv2011

The 2010 Interim Report of the Long-Baseline Neutrino Experiment Collaboration Physics Working Groups

In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science collaboration initiated a study to investigate the physics potential of the experiment with a broad set of different beam, near- and far-detector configurations. Nine initial topics were identified as scientific areas that motivate construction of a long-baseline neutrino experiment with a very large far detector. We summarize the scientific justification for each topic and the estimated performance for a set of far detector reference configurations. We report also on a study of optimized beam parameters and the physics capability of proposed Near Detector configurations. This document was presented to the collaboration in fall 2010 and updated with minor modifications in early 2011.

hep-ex↗