arXiv subjects
Publications and source records attributed to R. Iuppa.
This is a collection of papers presented by the JEM-EUSO Collaboration at the 39th International Cosmic Ray Conference (ICRC 2025) (Geneva, Switzerland, July 14--24, 2025).
The High Energy Particle Detector (HEPD-02) is a payload of the second China Seismo-Electromagnetic Satellite (CSES-02), designed and built by the Italian Limadou collaboration. Its purpose is to detect cosmic rays and trapped particles of radiation belts, in the kinetic energy range 3-100 MeV for electrons, 30-200 MeV for protons. HEPD-02 is the first space detector to use a tracking detector based on Monolithic Active Pixel Sensors (MAPS). The MAPS provides high spatial resolution, low noise, increased robustness, and low production costs. Operating MAPS in space presents a significant challenge due to strict power consumption requirements. To meet such constraints, a custom Tracker Data Acquisition (TDAQ) board and firmware have been designed and implemented, by using a commercial low-power Field Programmable Gate Array (FPGA). This paper addresses the design features of the TDAQ unit, enabling the tracking detector to be operated efficiently, with particular focus on the power consumption performance.
The Terzina telescope is designed to detect ultra-high energy cosmic rays (UHECRs) and Earth-skimming neutrinos from a 550 km low-Earth orbit (LEO) by observing Cherenkov light emitted by Extensive Air Showers (EAS) in the Earth's atmosphere pointing towards the telescope and in the field of view. In this contribution, a simulation chain for the Terzina telescope on board the NUSES mission will be presented. The chain encompasses all stages of the detection process, from event generation and EAS modelling with CORSIKA and EASCherSim to Geant4-based simulations of the telescope's geometry and optics, followed by modelling of the trigger system and silicon photomultiplier (SiPM) response. The Geant4 module includes the real CAD model of the telescope structure and optical components, with aspherical lenses manually implemented to ensure accurate representation of the optical efficiency and point spread function in Geant4. This comprehensive pipeline, developed using modular C++ code and Python tools for event analysis and reconstruction, produces detailed performance assessments of a telescope operating in a LEO mission but can be adapted for any high altitude Cherenkov telescope, making it a versatile tool for future observatory designs. The possibility of modelling balloons in the atmosphere has also been developed.
This work presents a novel solution for the packaging of ALPIDE chips that facilitates non-planar assembly with a minimal material budget. This solution represents a technological advancement based on methodologies developed for the ALICE ITS1 and the STAR tracker two decades ago. The core of this approach involves the use of flexible cables composed of aluminum and polyimide, with thicknesses on the order of tens of micrometers. These cables are connected to the sensors using single-point Tape Automated Bonding (spTAB), which replaces the traditional wire bonding technique that is suboptimal for curved integrations. The spTAB bonding is achieved by creating openings in the polyimide layer, allowing aluminum wires to remain free-standing, which are then connected to the sensor using pressure and ultrasonic energy. Extending this concept, we have applied this approach to entire printed circuit boards (PCBs), resulting in a fully flexible packaging solution maintaining an ultra-low material budget. This work introduces a prototype utilizing this method to bond an ALPIDE chip, proposing it as a viable option for future designs necessitating flexible packaging for both the chip and associated electronics. The overall workflow, comprising microfabrication and assembly, is carried out at the Fondazione Bruno Kessler and INFN TIFPA laboratories and will be detailed to elucidate our procedures and demonstrate the applicability of our solution in future experimental setups. The proposed packaging features a flexible PCB constructed from three stacked layers, each containing 20 $\mu$m thick aluminum features and a 25 $\mu$m thick polyimide substrate. These layers include a ground layer, a signal layer (encompassing both digital and analog signals), and a local bonding layer (which substitutes wire bonding).
Gas Electron Multiplier (GEM) detectors are crucial for enabling high-resolution X-ray polarisation of astrophysical sources when coupled to custom pixel readout ASIC in Gas Pixel Detectors (GPD), as in the Imaging X-ray Polarimetry Explorer (IXPE), the Polarlight cubesat pathfinder and the PFA telescope onboard the future large enhanced X-ray Timing and Polarimetry (eXTP) Chinese mission. The R&D efforts of the IXPE collaboration have resulted in mature GPD technology. However, limitations in the classical wet-etch or laser-drilled fabrication process of GEMs motivated our exploration of alternative methods. This work focuses on investigating a plasma-based etching approach for fabricating GEM patterns at Fondazione Bruno Kessler (FBK). The objective is to improve the aspect ratio of the GEM holes, to mitigate the charging of the GEM dielectric which generates rate-dependent gain changes. Unlike the traditional wet-etch process, Reactive Ion Etching (RIE) enables more vertical etching profiles and thus better aspect ratios. Moreover, the RIE process promises to overcome non-uniformities in the GEM hole patterns which are believed to cause systemic effects in the azimuthal response of GPDs equipped with either laser-drilled or wet-etch GEMs. We present a GEM geometry with 20 micrometers in diameter and 50 micrometers pitch, accompanied by extensive characterisation (SEM and PFIB) of the structural features and aspect ratios. The collaboration with INFN Pisa and Turin enabled us to compare the electrical properties of these detectors and test their performance in their use as electron multipliers in GPDs. Although this R&D work is in its initial stages, it holds promise for enhancing the sensitivity of the IXPE mission in X-ray polarimetry measurements through GEM pattern with more vertical hole profiles.
The debate on the role of school closures as a mitigation strategy against the spread of Covid-19 is gaining relevance due to emerging variants in Europe. According to WHO, decisions on schools "should be guided by a risk-based approach". However, risk evaluation requires sound methods, transparent data and careful consideration of the context at the local level. We review a recent study by Gandini et al., on the role of school opening as a driver of the second COVID-19 wave in Italy, which concluded that there was no connection between school openings/closures and SARS-CoV-2 incidence. infections. This analysis has been widely commented in Italian media as conclusive proof that "schools are safe". However the study presents severe oversights and careless interpretation of data.
The hadronic interaction of cosmic rays with solar atmosphere can produce high energy gamma rays. The gamma-ray luminosity is correlated both with the flux of primary cosmic rays and the intensity of the solar magnetic field. The gamma rays below 200 GeV have been observed by $Fermi$ without any evident energy cutoff. The bright gamma-ray flux above 100 GeV has been detected only during solar minimum. The only available data in TeV range come from the HAWC observations, however outside the solar minimum. The ARGO-YBJ dataset has been used to search for sub-TeV/TeV gamma rays from the Sun during the solar minimum from 2008 to 2010, the same time period covered by the Fermi data. A suitable model containing the Sun shadow, solar disk emission and inverse-Compton emission has been developed, and the chi-square minimization method was used to quantitatively estimate the disk gamma-ray signal. The result shows that no significant gamma-ray signal is detected and upper limits to the gamma-ray flux at 0.3$-$7 TeV are set at 95\% confidence level. In the low energy range these limits are consistent with the extrapolation of the Fermi-LAT measurements taken during solar minimum and are compatible with a softening of the gamma-ray spectrum below 1 TeV. They provide also an experimental upper bound to any solar disk emission at TeV energies. Models of dark matter annihilation via long-lived mediators predicting gamma-ray fluxes > $10^{-7}$ GeV $cm^{-2}$ $s^{-1}$ below 1 TeV are ruled out by the ARGO-YBJ limits.
This paper reports on the observation of the sidereal large-scale anisotropy of cosmic rays using data collected by the ARGO-YBJ experiment over 5 years (2008$-$2012). This analysis extends previous work limited to the period from 2008 January to 2009 December,near the minimum of solar activity between cycles 23 and 24.With the new data sample the period of solar cycle 24 from near minimum to maximum is investigated. A new method is used to improve the energy reconstruction, allowing us to cover a much wider energy range, from 4 to 520 TeV. Below 100 TeV, the anisotropy is dominated by two wide regions, the so-called "tail-in" and "loss-cone" features. At higher energies, a dramatic change of the morphology is confirmed. The yearly time dependence of the anisotropy is investigated. Finally, no noticeable variation of cosmic-ray anisotropy with solar activity is observed for a median energy of 7 TeV.
A correlation between the secondary cosmic ray flux and the near-earth electric field intensity, measured during thunderstorms, has been found by analyzing the data of the ARGO-YBJ experiment, a full coverage air shower array located at the Yangbajing Cosmic Ray Laboratory (4300 m a. s. l., Tibet, China). The counting rates of showers with different particle multiplicities, have been found to be strongly dependent upon the intensity and polarity of the electric field measured during the course of 15 thunderstorms. In negative electric fields (i.e. accelerating negative charges downwards), the counting rates increase with increasing electric field strength. In positive fields, the rates decrease with field intensity until a certain value of the field EFmin (whose value depends on the event multiplicity), above which the rates begin increasing. By using Monte Carlo simulations, we found that this peculiar behavior can be well described by the presence of an electric field in a layer of thickness of a few hundred meters in the atmosphere above the detector, which accelerates/decelerates the secondary shower particles of opposite charge, modifying the number of particles with energy exceeding the detector threshold. These results, for the first time, give a consistent explanation for the origin of the variation of the electron/positron flux observed for decades by high altitude cosmic ray detectors during thunderstorms.
The ARGO-YBJ experiment, a full coverage extensive air shower (EAS) detector located at high altitude (4300 m a.s.l.) in Tibet, China, has smoothly taken data, with very high stability, since November 2007 to the beginning of 2013. The array consisted of a carpet of about 7000 m$^2$ Resistive Plate Chambers (RPCs) operated in streamer mode and equipped with both digital and analog readout, providing the measurement of particle densities up to few particles per cm$^2$. The unique detector features (full coverage, readout granularity, wide dynamic range, etc) and location (very high altitude) allowed a detailed study of the lateral density profile of charged particles at ground very close to the shower axis and its description by a proper lateral distribution function (LDF). In particular, the information collected in the first 10 m from the shower axis have been shown to provide a very effective tool for the determination of the shower development stage ("age") in the energy range 50 TeV - 10 PeV. The sensitivity of the age parameter to the mass composition of primary Cosmic Rays is also discussed.
The ARGO-YBJ detector, located at the Yangbajing Cosmic Ray Laboratory (4300 m a. s. l., Tibet, China), was a full coverage air shower array dedicated to gamma ray astronomy and cosmic ray studies. The wide field of view (~ 2 sr) and high duty cycle (> 86%), made ARGO-YBJ suitable to search for short and unexpected gamma ray emissions like gamma ray bursts (GRBs). Between 2007 November 6 and 2013 February 7, 156 satellite-triggered GRBs (24 of them with known redshift) occurred within the ARGO-YBJ field of view. A search for possible emission associated to these GRBs has been made in the two energy ranges 10-100 GeV and 10-1000 GeV. No significant excess has been found in time coincidence with the satellite detections nor in a time window of one hour after the bursts. Taking into account the EBL absorption, upper limits to the energy fluence at 99% of confidence level have been evaluated,with values ranging from ~ 10-5 erg cm-2 to ~10-1 erg cm-2.
This paper has the purpose to study the rate capability of the Resistive Plate Chamber, RPC, starting from the basic physics of this detector. The effect of different working parameters determining the rate capability is analysed in detail, in order to optimize a new family of RPCs for applications to heavy irradiation environments and in particular to the LHC phase 2. A special emphasis is given to the improvement achievable by minimizing the avalanche charge delivered in the gas. The paper shows experimental results of Cosmic Ray tests, performed to study the avalanche features for different gas gap sizes, with particular attention to the overall delivered charge. For this purpose, the paper studies, in parallel to the prompt electronic signal, also the ionic signal which gives the main contribution to the delivered charge. Whenever possible the test results are interpreted on the base of the RPC detector physics and are intended to extend and reinforce our physical understanding of this detector.
We report on a measurement of thermal neutrons, generated by the hadronic component of extensive air showers (EAS), by means of a small array of EN-detectors developed for the PRISMA project (PRImary Spectrum Measurement Array), novel devices based on a compound alloy of ZnS(Ag) and $^{6}$LiF. This array has been operated within the ARGO-YBJ experiment at the high altitude Cosmic Ray Observatory in Yangbajing (Tibet, 4300 m a.s.l.). Due to the tight correlation between the air shower hadrons and thermal neutrons, this technique can be envisaged as a simple way to estimate the number of high energy hadrons in EAS. Coincident events generated by primary cosmic rays of energies greater than 100 TeV have been selected and analyzed. The EN-detectors have been used to record simultaneously thermal neutrons and the air shower electromagnetic component. The density distributions of both components and the total number of thermal neutrons have been measured. The correlation of these data with the measurements carried out by ARGO-YBJ confirms the excellent performance of the EN-detector.
We report on the extensive multi-wavelength observations of the blazar Markarian 421 (Mrk 421) covering radio to gamma-rays, during the 4.5 year period of ARGO-YBJ and Fermi common operation time, from August 2008 to February 2013. In particular, thanks to the ARGO-YBJ and Fermi data, the whole energy range from 100 MeV to 10 TeV is covered without any gap. In the observation period, Mrk 421 showed both low and high activity states at all wavebands. The correlations among flux variations in different wavebands were analyzed. Seven large flares, including five X-ray flares and two GeV gamma-ray flares with variable durations (3-58 days), and one X-ray outburst phase were identified and used to investigate the variation of the spectral energy distribution with respect to a relative quiescent phase. During the outburst phase and the seven flaring episodes, the peak energy in X-rays is observed to increase from sub-keV to few keV. The TeV gamma-ray flux increases up to 0.9-7.2 times the flux of the Crab Nebula. The behavior of GeV gamma-rays is found to vary depending on the flare, a feature that leads us to classify flares into three groups according to the GeV flux variation. Finally, the one-zone synchrotron self-Compton model was adopted to describe the emission spectra. Two out of three groups can be satisfactorily described using injected electrons with a power-law spectral index around 2.2, as expected from relativistic diffuse shock acceleration, whereas the remaining group requires a harder injected spectrum. The underlying physical mechanisms responsible for different groups may be related to the acceleration process or to the environment properties.
The events recorded by ARGO-YBJ in more than five years of data collection have been analyzed to determine the diffuse gamma-ray emission in the Galactic plane at Galactic longitudes 25° < l < 100° and Galactic latitudes . The energy range covered by this analysis, from ~350 GeV to ~2 TeV, allows the connection of the region explored by Fermi with the multi-TeV measurements carried out by Milagro. Our analysis has been focused on two selected regions of the Galactic plane, i.e., 40° < l < 100° and 65° < l < 85° (the Cygnus region), where Milagro observed an excess with respect to the predictions of current models. Great care has been taken in order to mask the most intense gamma-ray sources, including the TeV counterpart of the Cygnus cocoon recently identified by ARGO-YBJ, and to remove residual contributions. The ARGO-YBJ results do not show any excess at sub-TeV energies corresponding to the excess found by Milagro, and are consistent with the predictions of the Fermi model for the diffuse Galactic emission. From the measured energy distribution we derive spectral indices and the differential flux at 1 TeV of the diffuse gamma-ray emission in the sky regions investigated.
The ARGO-YBJ experiment has been in stable data taking from November 2007 till February 2013 at the YangBaJing Cosmic Ray Observatory (4300 m a.s.l.). The detector consists of a single layer of Resistive Plate Chambers (RPCs) ( about 6700 m^2}) operated in streamer mode. The signal pick-up is obtained by means of strips facing one side of the gas volume. The digital readout of the signals, while allows a high space-time resolution in the shower front reconstruction, limits the measurable energy to a few hundred TeV. In order to fully investigate the 1-10 PeV region, an analog readout has been implemented by instrumenting each RPC with two large size electrodes facing the other side of the gas volume. Since December 2009 the RPC charge readout has been in operation on the entire central carpet (about 5800 m^2). In this configuration the detector is able to measure the particle density at the core position where it ranges from tens to many thousands of particles per m^2. Thus ARGO-YBJ provides a highly detailed image of the charge component at the core of air showers. In this paper we describe the analog readout of RPCs in ARGO-YBJ and discuss both the performance of the system and the physical impact on the EAS measurements.
The ARGO-YBJ experiment is a full-coverage air shower detector located at the Yangbajing Cosmic Ray Observatory (Tibet, People's Republic of China, 4300 m a.s.l.). The high altitude, combined with the full-coverage technique, allows the detection of extensive air showers in a wide energy range and offer the possibility of measuring the cosmic ray proton plus helium spectrum down to the TeV region, where direct balloon/space-borne measurements are available. The detector has been in stable data taking in its full configuration from November 2007 to February 2013. In this paper the measurement of the cosmic ray proton plus helium energy spectrum is presented in the region 3-300 TeV by analyzing the full collected data sample. The resulting spectral index is $γ= -2.64 \pm 0.01$. These results demonstrate the possibility of performing an accurate measurement of the spectrum of light elements with a ground based air shower detector.
The search for Gamma Ray Burst (GRB) emission in the energy range 1-100 GeV in coincidence with the satellite detection has been carried out using the Astrophysical Radiation with Ground-based Observatory at YangBaJing (ARGO-YBJ) experiment. The high altitude location (4300 m a.s.l.), the large active surface ($\sim$ 6700 m$^2$ of Resistive Plate Chambers), the wide field of view ($\sim 2~$sr, limited only by the atmospheric absorption) and the high duty cycle ($>$ 86 %) make the ARGO-YBJ experiment particularly suitable to detect short and unexpected events like GRBs. With the scaler mode technique, i.e., counting all the particles hitting the detector with no measurement of the primary energy and arrival direction, the minimum threshold of $\sim$ 1 GeV can be reached, overlapping the direct measurements carried out by satellites. During the experiment lifetime, from December 17, 2004 to February 7, 2013, a total of 206 GRBs occurring within the ARGO-YBJ field of view (zenith angle $θ$ $\le$ 45$^{\circ}$) have been analyzed. This is the largest sample of GRBs investigated with a ground-based detector. Two lightcurve models have been assumed and since in both cases no significant excess has been found, the corresponding fluence upper limits in the 1-100 GeV energy region have been derived, with values as low as 10$^{-5}~$erg cm$^{-2}$. The analysis of a subset of 24 GRBs with known redshift has been used to constrain the fluence extrapolation to the GeV region together with possible cutoffs under different assumptions on the spectrum.