arXiv subjects

R. L. C. Vink

Publications and source records attributed to R. L. C. Vink.

36 records · Page 2Linked to original sources

arXiv2006

Colloid-Polymer Mixtures Confined Between Asymmetric Walls: Simulation Evidence for an Interface Localization Transition

Phase separation of colloid-polymer mixtures, described by the Asakura-Oosawa (AO) model, confined in a thin slit pore is studied by grand-canonical Monte Carlo simulation. While one wall is a hard wall for both particles, at the other wall there acts an additional repulsive potential on the colloids only. Varying the strength of this potential, a crossover from capillary condensation to an interface localization transition is found. The latter occurs under conditions where in the bulk almost complete phase separation has occurred.

cond-mat.soft↗

arXiv2006

Coexistence diameter in two-dimensional colloid-polymer mixtures

We demonstrate that the law of the rectilinear coexistence diameter in two-dimensional (2D) mixtures of non-spherical colloids and non-adsorbing polymers is violated. Upon approach of the critical point, the diameter shows logarithmic singular behavior governed by a term t ln(t), with t the relative distance from the critical point. No sign of a term t^2b could be detected, with b the critical exponent of the order parameter, indicating a very weak or absent Yang-Yang anomaly. Our analysis thus reveals that non-spherical particle shape alone is not sufficient for the formation of a pronounced Yang-Yang anomaly in the critical behavior of fluids.

cond-mat.stat-mech↗

arXiv2006

Critical behavior in colloid-polymer mixtures: theory and simulation

We extensively investigated the critical behavior of mixtures of colloids and polymers via the two-component Asakura-Oosawa model and its reduction to a one-component colloidal fluid using accurate theoretical and simulation techniques. In particular the theoretical approach, hierarchical reference theory [Adv. Phys. 44, 211 (1995)], incorporates realistically the effects of long-range fluctuations on phase separation giving exponents which differ strongly from their mean-field values, and are in good agreement with those of the three-dimensional Ising model. Computer simulations combined with finite-size scaling analysis confirm the Ising universality and the accuracy of the theory, although some discrepancy in the location of the critical point between one-component and full-mixture description remains. To assess the limit of the pair-interaction description, we compare one-component and two-component results.

cond-mat.soft↗

arXiv2006

Critical behavior of a colloid-polymer mixture confined between walls

We investigate the influence of confinement on phase separation in colloid-polymer mixtures. To describe the particle interactions, the colloid-polymer model of Asakura and Oosawa [J. Chem. Phys. 22, 1255 (1954)] is used. Grand canonical Monte Carlo simulations are then applied to this model confined between two parallel hard walls, separated by a distance D=5 colloid diameters. We focus on the critical regime of the phase separation and look for signs of crossover from three-dimensional (3D) Ising to two-dimensional (2D) Ising universality. To extract the critical behavior, finite size scaling techniques are used, including the recently proposed algorithm of Kim et al. [Phys. Rev. Lett. 91, 065701 (2003)]. Our results point to effective critical exponents that differ profoundly from 3D Ising values, and that are already very close to 2D Ising values. In particular, we observe that the critical exponent beta of the order parameter in the confined system is smaller than in 3D bulk, yielding a flatter binodal. Our results also show an increase in the critical colloid packing fraction in the confined system with respect to the bulk. The latter seems consistent with theoretical expectations, although subtleties due to singularities in the critical behavior of the coexistence diameter cannot be ruled out.

cond-mat.soft↗

arXiv2006

Critical behavior of the Widom-Rowlinson mixture: coexistence diameter and order parameter

The critical behavior of the Widom-Rowlinson mixture [J. Chem. Phys. 52, 1670 (1970)] is studied in d=3 dimensions by means of grand canonical Monte Carlo simulations. The finite size scaling approach of Kim, Fisher, and Luijten [Phys. Rev. Lett. 91, 065701 (2003)] is used to extract the order parameter and the coexistence diameter. It is demonstrated that the critical behavior of the diameter is dominated by a singular term proportional to t^(1-alpha), with t the relative distance from the critical point, and alpha the critical exponent of the specific heat. No sign of a term proportional to t^(2beta) could be detected, with beta the critical exponent of the order parameter, indicating that pressure-mixing in this model is small. The critical density is measured to be rho*sigma^3 = 0.7486 +/- 0.0002, with sigma the particle diameter. The critical exponents alpha and beta, as well as the correlation length exponent nu, are also measured and shown to comply with d=3 Ising criticality.

cond-mat.soft↗

arXiv2005

Isotropic-nematic interfacial tension of hard and soft rods: application of advanced grand canonical biased sampling techniques

Coexistence between the isotropic and the nematic phase in suspensions of rods is studied using grand canonical Monte Carlo simulations with a bias on the nematic order parameter. The biasing scheme makes it possible to estimate the interfacial tension gamma in systems of hard and soft rods. For hard rods with L/D=15, we obtain gamma ~ 1.4 kB T/L^2, with L the rod length, D the rod diameter, T the temperature, and kB the Boltzmann constant. This estimate is in good agreement with theoretical predictions, and the order of magnitude is consistent with experiments.

cond-mat.soft↗

arXiv2005

Accurate description of bulk and interfacial properties in colloid-polymer mixtures

Large-scale Monte Carlo simulations of a phase-separating colloid-polymer mixture are performed and compared to recent experiments. The approach is based on effective interaction potentials in which the central monomers of self-avoiding polymer chains are used as effective coordinates. By incorporating polymer nonideality together with soft colloid-polymer repulsion, the predicted binodal is in excellent agreement with recent experiments. In addition, the interfacial tension as well as the capillary length are in quantitative agreement with experimental results obtained at a number of points in the phase-coexistence region, without the use of any fit parameters

cond-mat.soft↗

arXiv2005

Interfacial tension of the isotropic--nematic interface in suspensions of soft spherocylinders

The isotropic to nematic transition in a system of soft spherocylinders is studied by means of grand canonical Monte Carlo simulations. The probability distribution of the particle density is used to determine the coexistence density of the isotropic and the nematic phases. The distributions are also used to compute the interfacial tension of the isotropic--nematic interface, including an analysis of finite size effects. Our results confirm that the Onsager limit is not recovered until for very large elongation, exceeding at least L/D=40, with L the spherocylinder length and D the diameter. For smaller elongation, we find that the interfacial tension increases with increasing L/D, in agreement with theoretical predictions.

cond-mat.soft↗

arXiv2005

Simulation and theory of fluid demixing and interfacial tension of mixtures of colloids and non-ideal polymers

An extension of the Asakura-Oosawa-Vrij model of hard sphere colloids and non-adsorbing polymers, that takes polymer non-ideality into account through a repulsive stepfunction pair potential between polymers, is studied with grand canonical Monte Carlo simulations and density functional theory. Simulation results validate previous theoretical findings for the shift of the bulk fluid demixing binodal upon increasing strength of polymer-polymer repulsion, promoting the tendency to mix. For increasing strength of the polymer-polymer repulsion, simulation and theory consistently predict the interfacial tension of the free colloidal liquid-gas interface to decrease significantly for fixed colloid density difference in the coexisting phases, and to increase for fixed polymer reservoir packing fraction.

cond-mat.soft↗

arXiv2004

Capillary Waves in a Colloid-Polymer Interface

The structure and the statistical fluctuations of interfaces between coexisting phases in the Asakura-Oosawa (AO) model for a colloid--polymer mixture are analyzed by extensive Monte Carlo simulations. We make use of a recently developed grand canonical cluster move with an additional constraint stabilizing the existence of two interfaces in the (rectangular) box that is simulated. Choosing very large systems, of size LxLxD with L=60 and D=120, measured in units of the colloid radius, the spectrum of capillary wave-type interfacial excitations is analyzed in detail. The local position of the interface is defined in terms of a (local) Gibbs surface concept. For small wavevectors capillary wave theory is verified quantitatively, while for larger wavevectors pronounced deviations show up. For wavevectors that correspond to the typical distance between colloids in the colloid-rich phase, the interfacial fluctuations exhibit the same structure as observed in the bulk structure factor. When one analyzes the data in terms of the concept of a wavevector-dependent interfacial tension, a monotonous decrease of this quantity with increasing wavevector is found. Limitations of our analysis are critically discussed.

cond-mat.soft↗

arXiv2004

Critical phenomena in colloid-polymer mixtures: interfacial tension, order parameter, susceptibility and coexistence diameter

The critical behavior of a model colloid-polymer mixture, the so-called AO model, is studied using computer simulations and finite size scaling techniques. Investigated are the interfacial tension, the order parameter, the susceptibility and the coexistence diameter. Our results clearly show that the interfacial tension vanishes at the critical point with exponent 2ν~ 1.26. This is in good agreement with the 3D Ising exponent. Also calculated are critical amplitude ratios, which are shown to be compatible with the corresponding 3D Ising values. We additionally identify a number of subtleties that are encountered when finite size scaling is applied to the AO model. In particular, we find that the finite size extrapolation of the interfacial tension is most consistent when logarithmic size dependences are ignored. This finding is in agreement with the work of Berg et al.[Phys. Rev. B, V47 P497 (1993)]

cond-mat.soft↗

arXiv2004

Entropy Driven Phase Separation in a Model Colloid-Polymer Mixture

A grand canonical Monte Carlo method for the simulation of a simple colloid-polymer mixture called the AO model will be described. The phase separation known to occur in this model is driven by entropy. The phase diagram of the unmixing transition, the surface tension and thecritical point will be determined. To appear in: "Computer Simulation Studies in Condensed Matter Physics XVIII, Eds. D.P. Landau, S.P. Lewis, and H.B. Schuettler (Springer Verlag, Heidelberg, Berlin, 2004).

cond-mat.soft↗

arXiv2003

The fluid-fluid interface in a model colloid-polymer mixture: Application of grand canonical Monte Carlo to asymmetric binary mixtures

We present a Monte Carlo method to simulate asymmetric binary mixtures in the grand canonical ensemble. The method is used to study the colloid-polymer model of Asakura and Oosawa. We determine the phase diagram of the fluid-fluid unmixing transition and the interfacial tension, both at high polymer density and close to the critical point. We also present density profiles in the two-phase region. The results are compared to predictions of a recent density functional theory.

cond-mat.soft↗

arXiv2002

Large well-relaxed models of vitreous silica, coordination numbers and entropy

A Monte Carlo method is presented for the simulation of vitreous silica. Well-relaxed networks of vitreous silica are generated containing up to 300,000 atoms. The resulting networks, quenched under the BKS potential, display smaller bond-angle variations and lower defect concentrations, as compared to networks generated with molecular dynamics. The total correlation functions T(r) of our networks are in excellent agreement with neutron scattering data, provided that thermal effects and the maximum inverse wavelength used in the experiment are included in the comparison. A procedure commonly used in experiments to obtain coordination numbers from scattering data is to fit peaks in rT(r) with a gaussian. We show that this procedure can easily produce incorrect results. Finally, we estimate the configurational entropy of vitreous silica.

cond-mat.mtrl-sci↗

arXiv2002

Configurational entropy of network-forming materials

We present a computationally efficient method to calculate the configurational entropy of network-forming materials. The method requires only the atomic coordinates and bonds of a single well-relaxed configuration. This is in contrast to the multiple simulations that are required for other methods to determine entropy, such as thermodynamic integration. We use our method to obtain the configurational entropy of well-relaxed networks of amorphous silicon and vitreous silica. For these materials we find configurational entropies of 1.02 kb and 0.97 kb per silicon atom, respectively, with kb the Boltzmann constant.

cond-mat.mtrl-sci↗

arXiv2001

Towards device-size atomistic models of amorphous silicon

The atomic structure of amorphous materials is believed to be well described by the continuous random network model. We present an algorithm for the generation of large, high-quality continuous random networks. The algorithm is a variation of the "sillium" approach introduced by Wooten, Winer, and Weaire. By employing local relaxation techniques, local atomic rearrangements can be tried that scale almost independently of system size. This scaling property of the algorithm paves the way for the generation of realistic device-size atomic networks.

cond-mat.mtrl-sci↗

arXiv2001

Simulation of polysilane and polysilyne formation and structure

We present Monte Carlo simulations of the formation and structure of polysilane, hybrid polysilane/polysilyne and polysilyne networks. The simulation technique allows for the investigation of large networks, containing up to 1000 silicon atoms. Our results show that ring formation is an important factor for all three types of materials. For polysilyne networks, a random structure is found incorporating cyclic substructures, linear chains and branching points.

cond-mat↗

arXiv2000

Relation between Raman spectra and Structure of Amorphous Silicon

In 1985, Beeman, Tsu and Thorpe established an almost linear relation between the Raman transverse-optic (TO) peak width and the spread in mean bond angle in a-Si. This relation is often used to estimate the latter quantity in experiments. In the last decade, there has been significant progress in the computer generation of sample networks of amorphous silicon. Exploiting this progress, this manuscript presents a more accurate determination of the relation between the TO peak width and angular spread using 1000-atom configurations. Also investigated and quantified are the relations between the TO peak frequency and the ratio of the intensities of the transverse-acoustic (TA) and TO peak, both as functions of the angular spread. As this spread decreases, the TA/TO intensity ratio decreases and the TO peak frequency increases. These relations offer additional ways to obtain structural information on a-Si from Raman measurements.

cond-mat↗